Hi there, Thank you so much for teaching and sharing. would you please tell me where did you download the packet tracer with the topology that has been configured for cable modem, cloud, DNS server, web server. Thank you in advance
Yes, Its connected, mostly the signal is hided. Check with the IP Address in the Laptop and verify it is automatically assigned. Even you can enable the signal view from the menu. Thank you so much for your great support.
Hello Gary, I had the same issue, go to the services tab on the RADIUS server then go to the AAA services tab and confirm that the correct password “user2Pass” is in the password box, for some reason it was showing up as “User2Pass” just change the capital “U” to lowercase then hit the save button and you should be good.
@@TechAcad I got same issue. I could not get the wireless card on Laptop2 to connect. I checked and rechecked every setting. Everything looks good, but cannot get Laptop 2 to connect. I had the exact same issue on previous PT exercise where I could not get a laptop to connect. It was as if the wireless network card wasn't turned on or something. I think this is a problem in Packet Tracer for some people, depending on what version you're running.
I love the "Hi friends!" greeting in every video! :D
Hello there!
Glad you like them!
@@TechAcad General Kenobi!
Thanks for your help!!! Regards from Spain
Happy to help!
And thanks for your great support and sharing always my dear friend....
For anyone having problems with laptop 2 in the last steps, the password is user2Pass and not User2Pass
great job! it was so helpful, thank you
Glad it helped!
And thank you so much for your great support and sharing my dear friend!
Thanks..I always watch your videos
Glad to hear that
Anyone else try to search in the web browser and it just tells you server reset connection? 16:08
16:10 for some reason "admin" "admin" works too
Nice video it was very useful :)
Glad it helped!
Hi there,
Thank you so much for teaching and sharing.
would you please tell me where did you download the packet tracer with
the topology that has been configured for cable modem, cloud, DNS
server, web server.
Thank you in advance
Hi
Glad it helped!
And if any guidelines needed, please feel free to contact our team.
Super vid. love it!!👍
packet tracer shows 100%, but laptop 2 still isn't showing that it's connected
Yes, Its connected, mostly the signal is hided. Check with the IP Address in the Laptop and verify it is automatically assigned. Even you can enable the signal view from the menu.
Thank you so much for your great support.
Hello Gary, I had the same issue, go to the services tab on the RADIUS server then go to the AAA services tab and confirm that the correct password “user2Pass” is in the password box, for some reason it was showing up as “User2Pass” just change the capital “U” to lowercase then hit the save button and you should be good.
@@TechAcad seems like a glich in PT. I find 'em
@@markoniusmaximus3893 don't recall if that was the issue. I baffled my prof too.
@@markoniusmaximus3893 ty very much! i love u
I wonder would my professor found out if I leave a ccomment here
Good work dear!
Thanks a lot
Obrigado! Ajudou-me!
Thank you so much for your great support and sharing my dear friend...!!!
Is anyone else having trouble with getting laptop2 to connect despite following the video exactly?
yep just keeps saying make new profile lol
Mil gracias por la ayuda.
Thank you foreva
Glad it helped!
thank you !!!
You're welcome!
super video ty
Laptop 2 unable to connect due to the following comment : dhcp failed apipa is being used
There might be any error in the configuration. Please make sure that all configuration done perfectly.
@@TechAcad I got same issue. I could not get the wireless card on Laptop2 to connect. I checked and rechecked every setting. Everything looks good, but cannot get Laptop 2 to connect. I had the exact same issue on previous PT exercise where I could not get a laptop to connect. It was as if the wireless network card wasn't turned on or something. I think this is a problem in Packet Tracer for some people, depending on what version you're running.
@@TechAcad I had this problem, me too :(
@@JasonEngland Same. Can't get the Services tab in RADIUS Server to show up either, so it must be a version thing.
If you go to the dhcp configuration you can change the maximum useable addresses from 5 to 10 and it fixes the problem
Thank yooooou~~*
You're welcome 😊
Halo bang
Kumaha damang?
Hai!
Abdi saé, hatur nuhun !!