I swear you do these walkthroughs, so much more clearly and concisely, coherent and just actually explain the concepts, and how/where to find exactly what it is we need. So much props to you, appreciate it man
Fix for anyone with "DHCP failed... APIPA is being used" Instead of switching to DHCP on PC1 and 2, stay on static. Manually copy his IPv4, Subnet mask, Gateway, and DNS Server addresses (they are greyed out when he switches to DHCP). This got me to read 100% completion.
I just realized how great it is that you have the Directions open as well in your videos. It allows for learning a little bit more than if you were just showing the final commands.
I had so much fun in this Packet Tracer. I configure R2 and R3. I really like it. I wonder if it’s any Telecommunication company will do the same based on Packet Tracer? Thank you Tech Acad best Cisco/NetAcad RUclipsr you are!
hi sir. Can you show on how to create The LAN in one of university department consist of the following number of office and lab, each of which will require its own subnet: Data Communication Lab : 20 nodes Lecturer’s office : 30 nodes Administration office : 25 nodes All the subnets should be connected to the University’s library network with the network address 202.184.15.0. Assume there are 5 hosts available on the library’s network. Identify the required networking devices to connect all the subnets together and from subnets to the library’s network. Perform the following: 1. Plan and assign the appropriate IP addresses for all hosts on the network. 2. Implement static routing to the mentioned network. 3. Simulate the internetwork connectivity test by using Cisco Packet Tracer software. a. Ping between hosts in the same subnet (3 hosts each subnet) b. Ping from any two hosts of each subnet to any two host in library’s network.
Hi We request you to contact us using our website, link will get our videos description. And also thanks for your great support and sharing my dear friend....
I tried receiving the Ip addresses from a DCHP Server. PC2 was succesful , but PC1 wasn't .. It says: DHCP failed. APIPA is being used... What can I do to solve this?
Ok, Please contact our team, so that we will help you to troubleshoot it. And thank you so much for your great support and sharing our channel with your friends...!!
I swear you do these walkthroughs, so much more clearly and concisely, coherent and just actually explain the concepts, and how/where to find exactly what it is we need. So much props to you, appreciate it man
Fix for anyone with "DHCP failed... APIPA is being used" Instead of switching to DHCP on PC1 and 2, stay on static. Manually copy his IPv4, Subnet mask, Gateway, and DNS Server addresses (they are greyed out when he switches to DHCP). This got me to read 100% completion.
thank you so much
I just realized how great it is that you have the Directions open as well in your videos. It allows for learning a little bit more than if you were just showing the final commands.
Glad it was helpful!
And thanks for your great support and sharing my dear friend....!!!
You're awesome, Thank you for all the support
Thank you too
Danke bro, ohne dich wärs unmöglich!!
Isso
Great Job! Short and Sweet. Very thorough explanations!! Thank you Tech Acad!!!!!!!!
Glad it was helpful!
And thanks for your great support and sharing...
Thank you for this❤ you’re helping me with my college classes & also a great teacher
I'm so glad!
I'm from sri lanka. your videos are very nice and awesome.. thanks a lot......
So nice of you
Thank you!!! You just saved me from failing class.
Glad I could help!
You are a really good teacher indeed.
Glad you like them!
I had so much fun in this Packet Tracer. I configure R2 and R3. I really like it. I wonder if it’s any Telecommunication company will do the same based on Packet Tracer? Thank you Tech Acad best Cisco/NetAcad RUclipsr you are!
That's great to hear! Glad you enjoyed it.
Thanks for your great video. Sir your explanations clear and easy to understand.
Thank you, sir.
So nice of you
And thanks for your great support and sharing my dear friend...!!!
Thank you so much Tech Acad! Amazing video as always!
Glad you liked it!
Straight to the point. Thanks.
you saved me. Thank You😭😭😭
Thanks again for a great video. Easy to understand. How can I download this for practice?
Thanks for your great support and sharing my dear friend...
You can contact us if needed any further support...
My DHCP failed, it stated APIPA is being used... I have not learned this, yet.
Thank you so much for your great support and sharing my dear friend!
Please verify DHCP Server and Relay!
Having this problem too
awesome as always, plz keep making these!!!
Thanks! Will do!
Awesome explanation. Thank you so much!!
Glad you enjoyed it!
Do you have any integration challenges on routers and routing basics?
Yes, soon
TNKS 4 ALL BRO
Any time
Thenks
hi sir. Can you show on how to create The LAN in one of university department consist of the following number of office and lab, each of which will require its own subnet:
Data Communication Lab : 20 nodes
Lecturer’s office : 30 nodes
Administration office : 25 nodes
All the subnets should be connected to the University’s library network with the network address 202.184.15.0. Assume there are 5 hosts available on the library’s network.
Identify the required networking devices to connect all the subnets together and from subnets to the library’s network.
Perform the following:
1. Plan and assign the appropriate IP addresses for all hosts on the network.
2. Implement static routing to the mentioned network.
3. Simulate the internetwork connectivity test by using Cisco Packet Tracer software.
a. Ping between hosts in the same subnet (3 hosts each subnet)
b. Ping from any two hosts of each subnet to any two host in library’s network.
Given Network Address: 202.185.78.64
Hi
We request you to contact us using our website, link will get our videos description.
And also thanks for your great support and sharing my dear friend....
No entiendo nada, pero muy buen video...
Thank you so much for your great support and sharing my dear friend!
thank you brother
You're welcome!
I love you man
Glad you like it!
Would you please remind me of the use that ip helper-address has? I can't find it in my notes ;___;
Sure, we will work on it!
I tried receiving the Ip addresses from a DCHP Server. PC2 was succesful , but PC1 wasn't .. It says: DHCP failed. APIPA is being used... What can I do to solve this?
Ok, Please contact our team, so that we will help you to troubleshoot it.
And thank you so much for your great support and sharing our channel with your friends...!!
Configure R1 as a DHCP Relay Agent
when i try to re open the file that is just 80% not 100% but if trying to Ping addres pc2 will be 100%
that is right?
Mostly.
Still you face trouble, feel free to contact our team.
@@TechAcad same problem its goes 80% and not 100%
goated