Thanks for the video. I just got the ESS dual sound unit to put inside my traxxas UDR. I'm using a RadioLinkRCx8 controller. My problem is that when I give throttle I hear nothing but when I go in reverse the sound is there as if I'm going forward. When I got my radiolinkrcx8 I had to reverse channel two in order for car to move forward when pulling the trigger towards me and visa versa. I solved that problem however the dual sound unit only works in reverse. I've gone through calibrate a dozen times, factory reset, ect. Any help would be greatly appreciated
Lonnie, could you explain how the shifting mechanics works and sound? (it seems that the unit has a built-in acceleration sensor... being curious how that works!)
my ess-one+ broke after i tried to install new sound using RCplus app.. it keep saying invalid firmware.. i can't reset it or upgrade the firmware.. if u have any solution, do tell me.. thanks
Trying to figure out how to run the same one but I have lights too and I am running traxxas batteries/connectors. Would I use a splitters to make both lights and sound an option at the same time ?
Unfortunately I can’t download the software either. I’ve been using this system for years but now it appears to have stop working on me😰 if anyone has figured out a fix it would be really appreciated if you could share it
@@Pezzapoo Thanks a lot. Good to know. I scraped all the sounds and managed to load them all into the software. Pretty jenky. The software is super goofy, and doesn't preview the sound when making settings/response changes. Alas, it's all working as designed I guess :) I really appreciate the reply.
Thanks for the great video, very informative. I’m thinking of getting one of these for my Tamiya 1/14 Globe Liner Truck. Were there many tractor truck sounds, large diesel V8?
Hi interesting video. Thanks. Can you please explain how you accessed the ESS website? There seems to be no web presence for the manufacturer. How do you do a factory re set? It seems a shame that these are sold without easy access to the website. Ta
Thanks for the video. I just got the ESS dual sound unit to put inside my traxxas UDR. I'm using a RadioLinkRCx8 controller. My problem is that when I give throttle I hear nothing but when I go in reverse the sound is there as if I'm going forward. When I got my radiolinkrcx8 I had to reverse channel two in order for car to move forward when pulling the trigger towards me and visa versa. I solved that problem however the dual sound unit only works in reverse. I've gone through calibrate a dozen times, factory reset, ect. Any help would be greatly appreciated
Hi Daniel, that is weird as it should make a sound forward and reverse regardless. After reset does it work at all before you calibrate?
Why would you not have the shifting activated? That’s the coolest part of this module.
I don’t like it shifting personally
Lonnie, could you explain how the shifting mechanics works and sound? (it seems that the unit has a built-in acceleration sensor... being curious how that works!)
my ess-one+ broke after i tried to install new sound using RCplus app.. it keep saying invalid firmware..
i can't reset it or upgrade the firmware.. if u have any solution, do tell me.. thanks
First contact is Sense support to see if they can help. Have you tried different usb ports/cables? Have to start at the basics
Can I put this in my X-Maxx 8s. I have two 4s 8500mah 14.8v batteries. Is it possible? Should I set the volume to 1 or 2?
It just needs a 5 volt supply
greensmodels.co.uk/products/ess-one-plus-dual-engine-sound-system-fully-programmable
Trying to figure out how to run the same one but I have lights too and I am running traxxas batteries/connectors. Would I use a splitters to make both lights and sound an option at the same time ?
you just need to splice the power leads into the power leads that run your lights. Any kind of connector will do rather than soldering it direct
I think you can dload the software from the website called RC PLUS and test for yourself m8
Just got the ESS Dual too but I can not find where to download to software, can you share the link?
www.sensehobby.com/index.php?m=content&c=index&a=lists&catid=115
Unfortunately I can’t download the software either. I’ve been using this system for years but now it appears to have stop working on me😰 if anyone has figured out a fix it would be really appreciated if you could share it
Does the software work now? I saw orher comments that it didnt work/ wasnt available.
I think it is now but checkout GT POWER they have a bluetooth one with light kit. Review soon
Hi, Can I power this from a spare channel in the reciever?
No mate, If I remember it draws power from your battery connector
The store doesn't work at all for me. The software basically doesn't access any of the sounds online.
I was using it last week. Maybe its just down short term
@@Pezzapoo Thanks a lot. Good to know. I scraped all the sounds and managed to load them all into the software. Pretty jenky. The software is super goofy, and doesn't preview the sound when making settings/response changes. Alas, it's all working as designed I guess :) I really appreciate the reply.
Thanks for the great video, very informative. I’m thinking of getting one of these for my Tamiya 1/14 Globe Liner Truck. Were there many tractor truck sounds, large diesel V8?
Thx, I will check for you
You realize your skill requires that you install more upgrades.
Lol thx
When i try to install a new sound the connection times out, any ideas?
Could be usb port? Have you tried others m8?
@@Pezzapoo It´s installing now, but geez its slow, at this rate im looking maybe 2-3 hrs..
@@Pezzapoo Changed to my second usb 3.0 port and now it works...sigh. Thanks for the tip.
Very good video, it cleared me of many doubts, but it generated one. Can it work with nimh batteries? thanks for the reply.
Thx much, yes nimh will be fine
@@Pezzapoo thx bro =D
How do set cut off time?
Its in the settings for your sound 1 or 2
Nice...But, Where's the install? - That's the part that's a pain in the ass. Programming it is straight forward.
what? do you mean just plugging it in?
@@Pezzapoo Hi Vlad, Yes but its ok now as I found a diagram. Thanks for the reply 🙂
Vlad, Do you know if it can be used with an Arma Fireteam 6s? thx
Hi interesting video. Thanks.
Can you please explain how you accessed the ESS website?
There seems to be no web presence for the manufacturer.
How do you do a factory re set?
It seems a shame that these are sold without easy access to the website.
Ta
their website seems to be down. I explain reset in the video. thx
It's on amazon got mine in 4 days and when you calibrate it. You wait 8 to 10 secs in between beeps till you activate throttle for calibrating.