212 Ghost gets a Noram Cheetah clutch
HTML-код
- Опубликовано: 16 авг 2022
- 212 Ghost gets a Noram Cheetah clutch
Installed a Noram Cheetah clutch and changed up the gear ratios on the 212 Ghost-powered Azusa minibike to see if we could get any more speed out of the combo.
Azusa minibike playlist - • $100 budget Performanc...
Subscribe for more minibike content: ruclips.net/user/Black66fea...
Instagram - Doubledown555Black66
__________________________________________________________________________________
Parts used -
Noram Cheetah clutch - www.ombwarehouse.com/noram-ch...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
man, that helped me out a lot, the RPMs at 35 sounded nice when u were just cruzin. told u, my lil town don't care about mini-bikes, long as you're not getting crazy and dangerous. farmers ride their 4 wheelers and side by sides all over this lil town. speed limit is 35. pretty neat lil town. thanks again for ideas to save money and time.
Where do you live at? Not specifically, but what state and east west etc...
@@sbfguy7793 mid Missouri
Good video Black66 😎
Wow did you move rurally . Good run
Thank you , Black66
Can you try a tav2 torqe converter with a belt that's to tight and one that's too loose??? And try the take off and top end
Awesome video! Now I thought I read that the GHOST had a governed coil? Even if, you should be able to out gear it?
Thanks! It does. Check out this video. I swapped the coil out. ruclips.net/video/lm6zTvhJHSk/видео.html
Got the ghost motor trying to put the Noram Cheetah Clutch on put the down pin not working do you need a special one. Thanks
So out of theory just cause I don’t understand GR that much, if I have a out of the box 224 with a 50t rear sprocket, I’m gonna get more top speed out of a 12T clutch than a 15T right? And also do you run #35 chains or #40’s; I really appreciate you always answering my questions, you’ve helped me SOOO much in my first week journey of mini bikin lol
For every tooth you add to the clutch, it is equivalent to subtracting 6 teeth from the rear sprocket. So in theory the 15t will give you more top speed to a point.
@@Black66 so to get more top end out of a 12T you’d out a bigger rear sprocket? Just wondering cause its still the stock rear , but a “performance” clutch I ordered that’s a 12T
How can you tell when you get valve float??
Ghost vs Ghost with accessory kit?
👏
Just picked the cheetah clutch gonna be installing it on a tillotson 225 . Was wondering if a key stock is needed for install?
Ya, the Cheetah needs a key. Its a nice clutch! I think you will like it.
Can you use the clutch both ways? Like instead of the sprocket on inside, can you use it with sprocket outside? And do they have a 15T for it?
Yes, you can mount it in board or out board. Yes,they do make a 15 tooth sprocket .
@@Black66 Awesome! Tired of blowing through Max TQs. They only last a few months with a lot of riding. I have a 212 Hemi on my Stand Up Scooter and I ride all the time. And about to Stage 2 it. Need a clutch that can do the job for me. I can only run outboard on it, that's why I asked. Thanks!
I'm super frustrated I can't get the bolt off the clutch shaft to install the clutch. How do you get it all videos don't show anything
Grabir with pliers
Do u think it's worth getting the cheetah clutch being expensive? You think with 19x7-8 tires you can get higher mph top speed numbers on your mini bike like say a CT200?
No. The Cheetah is more of a small tire racing clutch
My Baja Warrior also uses 19x7-8, a 5:1 gear ratio is as high as you want to go with a centrifugal clutch, you’ll get a top speed of 50mph but a very slow acceleration and you might burn your clutch. If you use a torque converter and remove your governor you’ll get way better acceleration and a top speed of 60mph.
@@alternator7893 Check out my video on gear ratios. Also check out the playlist for many combos with torque converters. Thanks for watching! ruclips.net/video/xV8i59aGUao/видео.html
@Elijah’s MiniBikes my baja warrior has a stock predator 212 engine, 19 inch wheels. Are you sure your bike has a 5:1 ratio and 19 inchers?. There a video of a kid with the same setup (5:1 ratio centrifugal clutch and 19” wheels) also getting 50mph on his but I can’t find it. Maybe your torque converter is spect for torque and not speed.
can you “help” me figure out a fat tire tricycle bike for adult and what engine (with electric starter) I need to get it to a good easy ride speed (15 to 20mph). I want to sprocket the rear shaft to push the dual rear tires. Dual disc rear brakes and single disc front brake.
Neighbors have golf carts. I want to get mom this bike with gasoline motor. Would you consider trying? Thanks, Alton. (Motor mount over rear axel center of course.
Any fat tired bike that is designed simular to this one would work .I would try and find a used one . The new bikes are expensive. Any of the small electric start engines will easily get the bike to 15 to 20 MPH . There is an Electric start Duromax 7 hp on Amazon for $199
Can you post a tubo kit video
I would like to .
Hey I'm asking if you might be able to help me I have a Mini bike engine question Please get back with me
What fuel tank mounting kit do you have??
I made the mounts. There is a video on the channel for the tank mounts .
Post a link to the clutch kit !
Link is in the description. Thanks for watching the videos!
What Gas tank are you using??
In this video I'm using a tank I picked up from a seller on ebay.
You should compare the cheetah vs torque converter clutch No One has done that yet i think the torque converter will out do the cheetah 🐆 😂