Oh my goodness. I have a PM2 that I’ve been trying to fix the centering on for a while. I tried this method and had it fixed in 30 seconds. Thank you!!!
Dude are you freaking kidding me?? This helped so much! Beyond just having a satisfying centering of the blade; before the blades on a couple of my Benchmades would drop shut, but only to a certain point and would slow down. Now the knives I tried this on are now swinging and drop shutting without any lag. Hands-down the best knife tip video I’ve seen.
SAME! Sad my stock bugout mini came perfectly balanced but my carbon fiber s90v bugout was off center, not very sharp, and would not drop shut even after a couple hundred closings.
I just received my Benchmade 940 today. Took it out and it was all the way to the left up against the scale. Being pissed off, went to eKnives and filled out a return request. Just happened to find your video, tried it out and it worked PERFECTLY! Thank you so much!
I have spent days trying every possible configuration on centering my para 3 and have unknowingly skipped over this video multiple times looking for a more "in depth" video and was to the point of putting the knife away for a while and this video came on and I tried it and it fixed just like that. Thank you for this. You have saved me from having an aneurysm. Haha.
Thank you, Taylor. I just received a new Benchmade Bailout 537-2301, special edition with the orange aluminum scales. Perfect action, but totally off-center towards the clip side. I tried several methods recommended by a number of knife reviewers. None worked even in the slightest. Your method solved my problem.
Bro, I've been trying to fix the centering on my p3 lightweight since I got it .. this actually worked! Thanks a ton! This is worth the patreon pledges alone 🤙
I've had a couple para3lw and they all seem to favor the left a tad due to only one washer and the compression lock pushing against the blade. No matter what I do I can't get it to be centered. I will have to try this technique specifically
I just received two new Kizer's today and was very disappointed that the blades were almost touching the liners inside, the blade centering was so bad. I did this trick on both knives and they are now perfect. Thank you very much.
Man I've tried everything. Just got a cold steel frenzy 3 and the centering was perfect but it had slight blade play. Tried to fix it and the centering got so bad the blade was rubbing the scale of the knife. This is the only thing that fixed it and it is perfectly centered and no blade play. Thank you so much man. Not all heros wear capes.
This is literally the first thing that actually worked for me. I put new handle scales on my button lock elementum and could not for the life of me get the blade to center after. 🔥🔥
I just installed some Flytanium scales on my 940-2 Osborne and couldn’t seem to get the blade centering right no matter what I tried until I saw your video! This worked perfectly for me!!! THANK for The BEST DAMN centering tip!
It works! Got a brand new mini Bugout which was slightly off - was considering returning it but I used this method and within 30 seconds it is perfectly centered!
I just got the BM 940 Blade HQ exclusive. I love the way it looks but the centering was bad! It was touching the scale on the clip side. I just fixed it thanks to this video! Perfectly centered now. Thanks Taylor
Wow. I been doing everything that all the other guys had posted to fixt the centering and no go!!! I thought I had to just settle for a 300 dollar BM knife with a off center blade. You showed me the best way possible and it worked! Not only was it perfect results first try, but it was the most easy thing out there!! I can even do it at work on the fly. Thank you. I just found out about you and I subscribed to your channel as well as all notifications. Thanks so much. I will share you with my Knife friends!
Killer video. Just did the AWT Agent liner delete scale swap on my manix2 and the blade was off just enough that my ocd was making me twitch. This centered it perfectly. If your ever in Maine I'll buy ya a beer! Thanks!
This is absolutely the best solution for centering! I got my super freek recently and it was way off from center, there are three body screws, but I just follow your instructions to loosen one by one and tighten back in opposite order, Voila- it's magically centered! Gosh I was gonna return the knife back, now I may enjoy it, nice work dude!
WOW. Joining the choir, here. This trick really worked - I tried a different method to center the blade on one of my knives and...no luck. TBH I was kinda skeptical of your method, but after trying it *once* on my knife, the blade is now perfectly centered. Thankyouthankyouthankyou. :) I'm so happy right now.
Thanks so much. I haven't been willing to even look at my Selkirk folder for over a year, I was so disgusted. But this technique worked perfectly for me. Now I want to get my whole collection out and tweak them all. Kudos!
Great tip. Worked the first time I tried it on an off-centered Rat 2, and this worked within less than a minute! I've wasted hours in the past using alternate methods, and this was by far the quickest and easiest remedy I have encountered. Thank you for the excellent advice.
Wow wow wow wow I cannot believe this works SO well. Spent good money on the new bugout 535-5 and the only imperfection was the blade was not centered (no rubbing of liners but just aesthetically unpleasing on a $255 knife!). 45 seconds and my blade was PERFECTLY centered. Thank you so much!
i have this on my regular mini bugout after i've put some flytanium scales on it, did you only loosen the screws on the body side where the blade was closer? and if so; did you only loosen the screw that held the partial liner, or did you losen the stop pin and the spacer screws too? cheers and merry christmas
Hi Taylor I’ve had a new FF Prolix for a week now and the cantering and tightness has been driving me insane. Was just about to send it back after trying a couple other techniques and just did what you said and BOOM! it’s now perfect and centred and free. Thanks so much, I’m very grateful! 🤩
I was astonished at how well this worked, my blade isn’t perfect but it’s far closer now. I’ll be doing this with all my BM from now on *Benchmade Bugout Stock, no mods*
Thank you! My Bailout centering has been off since I bought it a couple of years ago. I tried other methods of correcting it with no success. This worked with minimal effort on the first try. Thanks again.
I cannot believe this actually worked! I bought a brand new Benchmade Bugout and the blade centering was off (just enough to drive me crazy). I watched this video and in 30 seconds it was perfectly centered. Awesome video! Sharing and Subscribing!
I know this video is a year old but I almost sent my bench made in because I couldn’t figure out what to do. I did exactly what you said and it worked perfectly 🙏🙏 Keep them videos coming
Brilliant. I just put flytanium micarta scales on my Bugout and it was terribly off centered and hard to open. Took 30 seconds to do this and it is now good as new. Thanks
Just did this on my bugout and mini Adamas and it worked perfect, thanks! I did push it the wrong way first and made it worse, but did it again the other direction and centered them perfect.
THANK YOU THANK YOU THANK YOU! Iv got a bench made bailout m4 and i was close to sending it in for service do to the blade centering being so off. you have saved me weeks without my knife!
Bang!! Just got the crucarta and was tuning it and seen it was flying right a hair or so just did that trick perfect. 12 years collecting knives and taking them apart and never had that issue just would break them lube and put back together. But that was awesome. Great video thanks for help. 👍
If the knife has phosphorus bronze washers, check for burrs on them. Sometimes swapping the washers with each other can also help. But without a surface plate and dial indicator (preferably digital) to check for things like equal washer thickness, blade warp etc, there isn't much more that you can do except playing with the pivot screw. Some people have luck with completely replacing their washers - if matching washers are available, that is.
This video fixe my Benchmade Bailout that has been almost scale rubbing since I last cleaned it like 4 months ago. Thanks for the adivce, and keep up the awesome work on the channel!
Well I'll be!!! I almost returned a crucarta I had gotten fairly cheap because it was used (slightly abused) I was pissed the very tip of the blade was snapped off and the blade was dull as a butter knife then the fact the screws all had evidence of disassembly and the blade was not centered!!! Well, I had been trying to adjust the pivot and damn near stripped them out with no luck then I just tried this little trick and BAMMM she's dead center so now I can keep it and take her to the stones to put an edge and tip back on it Thanks 😊
Sandrin monza fixed. Thank you so much. For the price of a sandrin I was shocked to see the blade so off center, tried the way other people showed which definitely involved the pivot screw and the problem returned as the pivot screw loosened. After watching you it's perfect, took ten seconds. Thanks again!
Was skeptical but my Bugout has been off-centered about 10% toward the clip side since I changed the scales a few weeks back. I did this and ended up with it being off-centered towards the other direction by about 20%. Found out I was probably pressing on the blade too much so did the opposite and fixed it to where it is now centered. So maybe depending on how off centered it is will govern how hard you have to push the blade. Great vid.
I have a S.O.G terminus xr crimson red. Its slightly off center. And I've tried the other method and didn't work. Work on other knives. But your way worked great. Ima try on a few other knives.
dude are you shitting me? ive hated my 940 FOREVER cuz i just couldnt get it centered... even sent it to benchmade twice to have them look at it to no avail. and just like that this tip worked for me when nothing else did. THANK YOU.
Oh my goodness. I have a PM2 that I’ve been trying to fix the centering on for a while. I tried this method and had it fixed in 30 seconds. Thank you!!!
Dude are you freaking kidding me?? This helped so much! Beyond just having a satisfying centering of the blade; before the blades on a couple of my Benchmades would drop shut, but only to a certain point and would slow down. Now the knives I tried this on are now swinging and drop shutting without any lag. Hands-down the best knife tip video I’ve seen.
SAME! Sad my stock bugout mini came perfectly balanced but my carbon fiber s90v bugout was off center, not very sharp, and would not drop shut even after a couple hundred closings.
I meant to stress this video helped me perfectly center my carbon fiber bugout and now it drop shuts nice n' smooth.
This literally is one of the most useful videos on RUclips
I just received my Benchmade 940 today. Took it out and it was all the way to the left up against the scale. Being pissed off, went to eKnives and filled out a return request. Just happened to find your video, tried it out and it worked PERFECTLY!
Thank you so much!
One year later, I am here to thank you again. Worked great, today with a Spyderco Native 5 LW.❤
I have spent days trying every possible configuration on centering my para 3 and have unknowingly skipped over this video multiple times looking for a more "in depth" video and was to the point of putting the knife away for a while and this video came on and I tried it and it fixed just like that. Thank you for this. You have saved me from having an aneurysm. Haha.
Thank you, Taylor. I just received a new Benchmade Bailout 537-2301, special edition with the orange aluminum scales. Perfect action, but totally off-center towards the clip side. I tried several methods recommended by a number of knife reviewers. None worked even in the slightest. Your method solved my problem.
Bro, I've been trying to fix the centering on my p3 lightweight since I got it .. this actually worked! Thanks a ton!
This is worth the patreon pledges alone 🤙
I've had a couple para3lw and they all seem to favor the left a tad due to only one washer and the compression lock pushing against the blade. No matter what I do I can't get it to be centered. I will have to try this technique specifically
I just received two new Kizer's today and was very disappointed that the blades were almost touching the liners inside, the blade centering was so bad. I did this trick on both knives and they are now perfect. Thank you very much.
Was having trouble getting my xm-18 centered. I tried some of the other tricks with no lucks. This one is the one that worked! Thank you very much!
Man I've tried everything. Just got a cold steel frenzy 3 and the centering was perfect but it had slight blade play. Tried to fix it and the centering got so bad the blade was rubbing the scale of the knife. This is the only thing that fixed it and it is perfectly centered and no blade play. Thank you so much man. Not all heros wear capes.
This is literally the first thing that actually worked for me. I put new handle scales on my button lock elementum and could not for the life of me get the blade to center after. 🔥🔥
I just installed some Flytanium scales on my 940-2 Osborne and couldn’t seem to get the blade centering right no matter what I tried until I saw your video! This worked perfectly for me!!! THANK for The BEST DAMN centering tip!
You sir are a gentleman and a scholar. I just centered 2 of my favorite knives. My appreciation of these knives just increased.
A gentleman and a scholar? For fixing blade centering? 😂 Wow. I love a nicely centered blade, but dude, wtf?
Dude, this is wizardry. You explained this better than anyone else I’ve found. My PM2 is perfect now.
It works! My Kershaw Bel Air came slightly off center and adjusting the pivot didn’t work, but this method did the trick! Thank you!
just tried this on my benchmade 945 that I've attempted to fix centering on multiple times, worked like a charm!
It works! Got a brand new mini Bugout which was slightly off - was considering returning it but I used this method and within 30 seconds it is perfectly centered!
I was not sure this was going to work, but 20 seconds later, I was literally saying "holy shit" out loud.
My FT955 is awesomely centred now. Cheers.
Just tried this again on a second knife, a Kizer Hic-Cup. Totally worked! Perfectly centered!
I just got the BM 940 Blade HQ exclusive. I love the way it looks but the centering was bad! It was touching the scale on the clip side. I just fixed it thanks to this video! Perfectly centered now. Thanks Taylor
Wow. I been doing everything that all the other guys had posted to fixt the centering and no go!!! I thought I had to just settle for a 300 dollar BM knife with a off center blade. You showed me the best way possible and it worked! Not only was it perfect results first try, but it was the most easy thing out there!! I can even do it at work on the fly. Thank you. I just found out about you and I subscribed to your channel as well as all notifications. Thanks so much. I will share you with my Knife friends!
Killer video. Just did the AWT Agent liner delete scale swap on my manix2 and the blade was off just enough that my ocd was making me twitch. This centered it perfectly. If your ever in Maine I'll buy ya a beer! Thanks!
Best tip for blade centering, worked like a charm. Thanks!
PM2's seem to be notorious for being off center, I mean it doesn't hurt the functionality of still, thanks man, this helped me fix all 3 of my pm2's
This is absolutely the best solution for centering! I got my super freek recently and it was way off from center, there are three body screws, but I just follow your instructions to loosen one by one and tighten back in opposite order, Voila- it's magically centered! Gosh I was gonna return the knife back, now I may enjoy it, nice work dude!
Same thing here with my super Freek. It was just a little bit off but it bothered me. Within a minute dead center 🎉
WOW. Joining the choir, here. This trick really worked - I tried a different method to center the blade on one of my knives and...no luck. TBH I was kinda skeptical of your method, but after trying it *once* on my knife, the blade is now perfectly centered. Thankyouthankyouthankyou. :) I'm so happy right now.
Thanks so much. I haven't been willing to even look at my Selkirk folder for over a year, I was so disgusted. But this technique worked perfectly for me. Now I want to get my whole collection out and tweak them all. Kudos!
Thank you! It worked much better than the paper wedge method. You earned my subscribe today!
Thank you so much.I was adjusting the pivot screw only.Didnt even think of the other.Thank you
Awesome! My Shaman has been off-center since I got it. I paused your video and tried it. Literally 1 minute of work. Perfectly centered. Thank you!
Thanks! Been fighting with a bugout alignment, now fixed.
Great tip. Worked the first time I tried it on an off-centered Rat 2, and this worked within less than a minute! I've wasted hours in the past using alternate methods, and this was by far the quickest and easiest remedy I have encountered. Thank you for the excellent advice.
Worked for sure. Added some Rockdale Design scales and followed your instructions and bam!
This worked! Sometimes you need way more force than you would think.
Wow wow wow wow I cannot believe this works SO well. Spent good money on the new bugout 535-5 and the only imperfection was the blade was not centered (no rubbing of liners but just aesthetically unpleasing on a $255 knife!). 45 seconds and my blade was PERFECTLY centered. Thank you so much!
i have this on my regular mini bugout after i've put some flytanium scales on it, did you only loosen the screws on the body side where the blade was closer? and if so; did you only loosen the screw that held the partial liner, or did you losen the stop pin and the spacer screws too?
cheers and merry christmas
Thank you this trick worked perfectly on my Hogue Deka and only took like 10 seconds.
Hi Taylor
I’ve had a new FF Prolix for a week now and the cantering and tightness has been driving me insane. Was just about to send it back after trying a couple other techniques and just did what you said and BOOM! it’s now perfect and centred and free. Thanks so much, I’m very grateful! 🤩
I was astonished at how well this worked, my blade isn’t perfect but it’s far closer now. I’ll be doing this with all my BM from now on
*Benchmade Bugout Stock, no mods*
Had a Civivi Riffle that was way off. Tried all of the other tips online and wasn't getting results. This fixed it! Thanks so much
Thank you! My Bailout centering has been off since I bought it a couple of years ago. I tried other methods of correcting it with no success. This worked with minimal effort on the first try. Thanks again.
I cannot believe this actually worked! I bought a brand new Benchmade Bugout and the blade centering was off (just enough to drive me crazy). I watched this video and in 30 seconds it was perfectly centered.
Awesome video! Sharing and Subscribing!
I know this video is a year old but I almost sent my bench made in because I couldn’t figure out what to do. I did exactly what you said and it worked perfectly 🙏🙏 Keep them videos coming
Thanks for the vid. Fixed my PM2 in about 30 seconds and relieved the stress of sending it back for replacement.
The goat 🙏 just got my first pm2 today, it’s a cruwear micarta, and I absolutely baby it. 🕷 🕸
Thank you sir 🫡
I owe it to you man. I got a benchmade 940 with poor centering and this fixed it right away
Awesome video! I was just about to take my knife apart to fool with the centering but this method fixed it!
Thank you so much, just centered my DLT trading PM2 to perfection!!!
There’s a reason you have over a quarter million subscribers. After I watched this it’s now +1…thanks! Now going to watch your others.
Brilliant. I just put flytanium micarta scales on my Bugout and it was terribly off centered and hard to open. Took 30 seconds to do this and it is now good as new. Thanks
Still to this day this is the best fix the man is a genius
Bro I have been trying to center my bugout ever since I got it and this tip got it perfect! 👍
Just did this on my bugout and mini Adamas and it worked perfect, thanks!
I did push it the wrong way first and made it worse, but did it again the other direction and centered them perfect.
Dude, thanks for advice. You really changed my life!! 👍😁
Kind regards from germany
Rico
THANK YOU THANK YOU THANK YOU! Iv got a bench made bailout m4 and i was close to sending it in for service do to the blade centering being so off. you have saved me weeks without my knife!
Bang!! Just got the crucarta and was tuning it and seen it was flying right a hair or so just did that trick perfect. 12 years collecting knives and taking them apart and never had that issue just would break them lube and put back together. But that was awesome. Great video thanks for help. 👍
Worked perfectly first try on my bugout.
So, if this does not work ... is it :
a) I have a cheap-ass knife that is not well made?
b) What else can I do?
Thanks!
Just tried it on my Ganzo g7393.. a $25 knife from Amazon that I've been using for a year and a half. Worked for me.
If the knife has phosphorus bronze washers, check for burrs on them. Sometimes swapping the washers with each other can also help. But without a surface plate and dial indicator (preferably digital) to check for things like equal washer thickness, blade warp etc, there isn't much more that you can do except playing with the pivot screw. Some people have luck with completely replacing their washers - if matching washers are available, that is.
I just subscribed. Thanks for making a straight-to-the-point video that actually works. Just centered my new Shaman. So easy!
Thank you. I just centered a cheap knife. This helped, I did not think to push the blade in the direction of the wall is was off.
That worked great for me and my Spyderco Native Chief, thanks a lot!
Omg I tried this and it worked perfectly! Thank you so much!
Surprised it actually worked! Fixed centering on my brand new 940! Thank you
Helped me with my Demko. Was going to return it but now it’s dead center.
This video fixe my Benchmade Bailout that has been almost scale rubbing since I last cleaned it like 4 months ago. Thanks for the adivce, and keep up the awesome work on the channel!
Well I'll be!!! I almost returned a crucarta I had gotten fairly cheap because it was used (slightly abused) I was pissed the very tip of the blade was snapped off and the blade was dull as a butter knife then the fact the screws all had evidence of disassembly and the blade was not centered!!! Well, I had been trying to adjust the pivot and damn near stripped them out with no luck then I just tried this little trick and BAMMM she's dead center so now I can keep it and take her to the stones to put an edge and tip back on it Thanks 😊
Very informative, thank you. I finally managed to center my Sypderco Tenacious !!!
Very handy and effective. Worked perfectly
Worked on my Bugout after install of new scales. Thanks Tyler!
Dang, this worked like a charm with my QSP Penguin. Thanks!
Bar none! The BEST VIDEO ON KNIFE BLADE CENTERING PERIOD!! Thank you!!! 👍👍
Never tried this one. Great stuff, love the channel Taylor. I spend way too much money from channels like this.
100% Worked Benchmade Vector! Thank you!
Sandrin monza fixed. Thank you so much. For the price of a sandrin I was shocked to see the blade so off center, tried the way other people showed which definitely involved the pivot screw and the problem returned as the pivot screw loosened. After watching you it's perfect, took ten seconds. Thanks again!
I very seldom post comments however I enjoy all of your videos and this one was very useful. Thanks for the great job and uploads.
Thank you for this! I tried this on my RAT 1 and it's pretty much perfect now. 👍
Thanks brother! Just helped me tune up my newly acquired used Hinderer xm-18!
I know I'm late here but i just put new scales on my bugout and this got me back to center.
Thanks man my manix 2 was off by the slightest and it was driving me nuts
Ha! It worked on my BM bailout !! Much thanks !!!
Liked and subbed. Mother of god I had a Demko and para 3 I couldn’t get to center. Thank you!
Worked like a charm on my Shaman, thx pal.. 👊😉
Worked great for me. Way easier than the other stuff I tried that didn’t work.
nice shave
love your vids
can't wait for the next EDC weekly!
carry on!
Thanks so much I have a zt 0350 and I’ve used the crap out of it and it is way off center. This is the perfect video I needed
Worked perfectly on my Benchmade 940! Thank you!
Worked on my Civivi. Thanks
I just got a Ontario rat 2 and the blade is off center and I was wondering how to get it to center and a day later you post this video, thanks a bunch
So simple and easy over looked😵love it🤙‼
Came here to say this same thing.
Thanks for the awesome videos Taylor. It’s a nice break from all the BS. I recently joined the discord and I’m having a blast so far.
Thank you for this. My para 3 is dead on center now!
This is the best tip I've found!
Was skeptical but my Bugout has been off-centered about 10% toward the clip side since I changed the scales a few weeks back. I did this and ended up with it being off-centered towards the other direction by about 20%. Found out I was probably pressing on the blade too much so did the opposite and fixed it to where it is now centered. So maybe depending on how off centered it is will govern how hard you have to push the blade. Great vid.
DAMN!! WORKED!! Everything else - failed every time. You da man THANK YOU 👍
Worked for my new knife. Perfect thank you
Not sure how you loosened body screws on a spyderco from one side while holding the blade. All my spyders need 2 drivers to loosen/tighten.
Wow! Hey thanks! That worked on my RAT 2! Preesh!
I have a S.O.G terminus xr crimson red. Its slightly off center. And I've tried the other method and didn't work. Work on other knives. But your way worked great. Ima try on a few other knives.
dude are you shitting me? ive hated my 940 FOREVER cuz i just couldnt get it centered... even sent it to benchmade twice to have them look at it to no avail. and just like that this tip worked for me when nothing else did. THANK YOU.
Thanks for your help mate.