@@natelund2914 Looks like the EdgePro Apex, good system more flexibility for angles, thin blades etc than others I've tried. I use water stones on my camp knives but for day to day the EdgePro is pretty foolproof
Winchester INC. if you add copper to your acid wash the copper will bind to your blade giving it a copper coat. You might want to look into it a bit more as it does have a slightly different process to normal acid washing
Thank you very much for the instructions! I tried this today on my Tenacious. I used pure Ferrochlorid for 15 minutes and produced the stonewashed effect in a plastic container with rocks I collected on my tours in the woods. I used WD40 as a liquid and shook it by hand for 5 minutes. The blade could be a little bit darker in my opinion but the stonewashed effect turned out pretty nice. I put Flytanium Ti scales and a black deep carry pocket clip in titanium on it. Finally I sharpened it with the Spyderco sharpmaker - I liked it already before in its original state but now it looks absolutely badass. Best regards from the Black Forest / South Germany!
Nice job. You're pretty funny while giving great instructions. Hope you're still enjoying life. Hope your neighbor is well also.😆 Going to do this to some knives now. Be blessed, Leo 🦁 from San Diego ✌️.
The song when he puts the knife back together: My Great Undoing · Of Men And Wolves ... you can thank me later... BTW Great build man! Did on my Persistence and looking forward to build a Tenacious!
Thanks for the video. I just got an M4 Tenacious to acid etch. Also got some copper scales Im going to shipwreck for it. Im gonna look into that tumbler and media from Harbor Freight.
Thanks for no overcomplicaing things. For those of us without decent knife sharpening skills/equipment, do you reckon nail polsih on the blade edge would work too?
Saw this video and pulled the trigger - UPS left today and I stonewashed my "brand new" Gray FreeTiger FT903 afterwards ... It's even more of a beauty now👍🏼 I just subscribed to your channel!!
Thanks for sharing! That was a fun one to watch. Is it weird that I impressed how well the audio sounded in the garage? lol Also congrats, you officially hit 100k, nice!
Dude, Nice Quality! It's crazy how lucky I've been on finding good channels. Keep up the good production work! And kudos to you for all the neat work you've been doing so far!
Damn fine video. Love this dude. I’ve got two Emerson A100’s and will try it on one. Also have two H&K Nitrous Blitz and will try it on one of them possibly. Look forward to seeing your other videos.
Listen, Walter White. It was too hot for the level of PPE you were wearing at first in the garage. 😂 glad you didn’t finish the video wearing the yellow rain suit.. looks like a fun project!
I second Mark Mattews comment below. Could you do a full video on your knife sharpener please? Where you can get it, tips etc on how to get a really good edge on your blade would be much appreciated. Keep up the great work :)
Dude i swear I'm rolling over hear😂🤪😅my neighbor decided to do his yard, weedeatter I think...hes now at full rpm.....doesn't it seem like when I start talking he gets closer and revs up the rpms.... i swear that was hilarious 🤣 😂 😆
Perhaps another idea for mansh*tmonday... a sharpening video ? Or have you already done that? At a quick glance through your videos, I couldn't find one..
Knice vid bro. I sharpen knives for a living, so hats off to you. Spydies are a great blade as well. Also like Chris Reeves Sebenza 21s and any plunger locks. Cheers
Nice video and congrats on the 100k! Get that plaque! Now that you're 100k we need a Man Shit Monday, Man Shit Tuesday, Man Shit Wednesday, Man Shit Thursday, Man Shit Friday, Man Shit Saturday and you can relax on Sunday with the family! :P
first video I've seen of yours and I instantly subscribed. Great video. Love how you give diy as well as money bought tips. Good to have both as I'm just starting out restoring blades and hopefully eventually forging my own. I actually have a knife I think this would look awesome on so thanks.
Awesome video! Thanks for making this available. I’m definitely going to have to try this. I love how you explain that it doesn’t have to be an overly complicated or expensive project. Just subscribed too.
Just found your Chanel and boy am I glad.. great content can't wait to pimp out my knife collection .. hope to see more knife videos with my subscription
Awesome job Jeremy. Those look sweet. Any chance of a video on how you sharpen your knives? Every time I try to sharpen mine, I wind up hacking them up. Love the channel man. Keep it up.
fun tip: do not put ferric chloride in aluminum containers. it will begin to boil and melt your aluminum container instantly. glass or plastic yall.
Bruh who would put a chemical that’s made to dissolve aluminum in aluminum
@@amonGustavo07 me. I'm that guy
@@amonGustavo07 you'd be surprised, there's too many dummies in the world haha
I know that from breaking bad
Man I love this channel. The editing is great, the camera work is amazing, and the content is out of this world. Congrats on 100k man!
Thanks 😊
Alright, Congrats on 100,000 Subscribers. Now let’s see some ads on these videos!!!
Thanks! 😊
Acid etch is definitely my favourite finish on blades, especially when you put a mirror finish edge on them it just makes it pop
The lords work sir! The lords work!
Can you do a review of that knife sharpener? A how to?
What sharpener is it?
@@natelund2914 Looks like the EdgePro Apex, good system more flexibility for angles, thin blades etc than others I've tried. I use water stones on my camp knives but for day to day the EdgePro is pretty foolproof
+10 for this suggestion.
Came across this looking to customize my edc but I’m staying cuz you’re funny as hell
Man we need more people like you. You tell us what we need to know with no messing about. And you're hilarious! Keep it up mate 👍
I've got citric acid it works well; I just leave the piece soaking over night to get a deep charcoal grey finish.
Try putting pennies it there for a copper wash it looks cool on a black blade
ORGANDONOR
Explain please 🤔
Winchester INC. if you add copper to your acid wash the copper will bind to your blade giving it a copper coat. You might want to look into it a bit more as it does have a slightly different process to normal acid washing
I did that. Even put a shit ton of copper in. Keeps rubbing straight off
Laeveld Paraatheid are you using pennies or actual copper. If your just using pennies it’s gonna take a lot of pennies and a lot of time...
Pennies are not copper anymore haven't been for a while!
Probably the nicest tenacious I’ve ever seen. Awesome vid man. 👍🏼
Thanks Mike 👍🏻
Thank you very much for the instructions! I tried this today on my Tenacious. I used pure Ferrochlorid for 15 minutes and produced the stonewashed effect in a plastic container with rocks I collected on my tours in the woods. I used WD40 as a liquid and shook it by hand for 5 minutes. The blade could be a little bit darker in my opinion but the stonewashed effect turned out pretty nice. I put Flytanium Ti scales and a black deep carry pocket clip in titanium on it. Finally I sharpened it with the Spyderco sharpmaker - I liked it already before in its original state but now it looks absolutely badass. Best regards from the Black Forest / South Germany!
Nice job. You're pretty funny while giving great instructions.
Hope you're still enjoying life.
Hope your neighbor is well also.😆
Going to do this to some knives now.
Be blessed,
Leo 🦁 from San Diego ✌️.
I might do this on my UK legal 2.5 inch unlockable Swiss Army Knife blade 😐.
Oh yeah, I’ve seen guys take apart their SA’s and do the whole tool set. Looks awesome! 😂
Oof..... I wish I couldn't say relatable
Alright alright, thanks for the lesson. Heading to garage now, 106 degrees right now in Laredo, Tx.
The song when he puts the knife back together: My Great Undoing · Of Men And Wolves ... you can thank me later... BTW Great build man! Did on my Persistence and looking forward to build a Tenacious!
Came across this video in my edc youtube hole...fine job sir. Really enjoyed your simple presentation. No need to be overly scientific, just fun.
It turn out cool looking and those scales are nice also.
Thanks for the video. I just got an M4 Tenacious to acid etch. Also got some copper scales Im going to shipwreck for it. Im gonna look into that tumbler and media from Harbor Freight.
I definitely drive my wife crazy sitting, watching TV, and Civivi flipping.
That's me she's always telling me to stop but I cannot civivi spyderco kershaw all are loud my elementum is probably the quietest
Thanks for no overcomplicaing things.
For those of us without decent knife sharpening skills/equipment, do you reckon nail polsih on the blade edge would work too?
i’ve never watched one video of someone’s and subscribed, until now!😂 i loved the whole thing!
Thank you so much. I have wanted to do this for years. I’m gonna now lol
I like the look and looks very doable, thanks!
I spotted that deck of monarch cards. Great video
Wow. Very nice. That's what I should do to my knives.
Oh my goodness!!! I’m super anxious, excited and hopeful we get a Man Shit Monday this week!!!
There should be one! Might be a man shit Tuesday though 😉
Testosterone Tuesday works!!! So excited!!!
It just looks dope...
The best reason to do almost anything
Love the Molon Labe flag! We use to chant this with all football teams I coached!
About to do this on my Satin blade BHQ Tanto PM2. Going to look sick!
Fellow magician? Loving those monarchs
Thanks for the tutorial man !!!
Immediately like this guy. Lol thanks for the good info sir, and thank you for your service.
Rockin that beard brother...beard brothers unite...great video
First time watching and i love it already
This is badass, im starting to really get into EDC stuff, love it.
"My neighbour decided to do his lawn", exactly when you need a knife!
Saw this video and pulled the trigger - UPS left today and I stonewashed my "brand new" Gray FreeTiger FT903 afterwards ... It's even more of a beauty now👍🏼
I just subscribed to your channel!!
Great outcome..... Love Spyderco blades. Subbed
Well done!!!
Awesome video dude. Great job.
Great video....would love to a one on flame bronzing
Dude that's the most awesome tutorial here in youtube! Ever!
I wonder if covering the edge of the blade with nail polish and then tape would help protect it better?
Man that came out like a champ, PS send you neighbor my way, yard needs a trim!
Sweet! Thanks for sharing
Looks great!
Awesome knife, amazing man! nice.
Finally! A Molon Labe banner that's in the correct font. Have that on my left forearm.
Thanks for sharing! That was a fun one to watch. Is it weird that I impressed how well the audio sounded in the garage? lol Also congrats, you officially hit 100k, nice!
Thanks! Glad the audio sounded good. Might be the new mic I have been testing out. The deity D3 pro. Love it so far. Review coming soon. 👍🏻
Dude, Nice Quality! It's crazy how lucky I've been on finding good channels. Keep up the good production work! And kudos to you for all the neat work you've been doing so far!
Thanks 👍🏻
Damn fine video. Love this dude. I’ve got two Emerson A100’s and will try it on one. Also have two H&K Nitrous Blitz and will try it on one of them possibly. Look forward to seeing your other videos.
May have to get one of those tumblers. I’ve got a few I’m really wanting to wash
Cool! I always wanted to make knifes. I was curious on how to get those finishes.
I love blackwashed blades and this one turned out great 👍
Listen, Walter White. It was too hot for the level of PPE you were wearing at first in the garage. 😂 glad you didn’t finish the video wearing the yellow rain suit.. looks like a fun project!
😂 it really was. 5min in that thing and I was sweating buckets 😆
Also love the Breaking Bad reference 😉
Man Shit Monday.. released on Monday. Wow dude, you feelin' ok?
😂 I totally earned that 😂🤣
Pretty cool knife and Spidey Flick. I thought that the Ferric Chloride would have eaten off the finger nail polish.
I'm not even into knives like that but I enjoy your content so much!
😊
Hello, great and funny video. Thanks a lot for your amazing instructions 👍
I second Mark Mattews comment below. Could you do a full video on your knife sharpener please? Where you can get it, tips etc on how to get a really good edge on your blade would be much appreciated. Keep up the great work :)
I third that request!
Just finished stone washing my Ontario Rat 1, looks great! Also Rit Dyed the scales black. Thanks for the info!
Dude i swear I'm rolling over hear😂🤪😅my neighbor decided to do his yard, weedeatter I think...hes now at full rpm.....doesn't it seem like when I start talking he gets closer and revs up the rpms.... i swear that was hilarious 🤣 😂 😆
Just discovered this channel, I love the content and it's cool to see a content creator in the Jacksonville area
Great video! Gonna try it on some golf clubs 😁
Thanks for the video. Can’t wait to try it to one of my knives that needs a facelift.
Thank you. Great vid.
I just stumbled accrosed this video and was not disappointed
That was pretty cool. Thanks for the knife finishing lesson!
Great tips, thanks a lot 🤘
BOOM!!! 100,000 . . . . . . CONGRATS, BROTHER!!!
Thanks 😊
Like the humor, thanks for the great info.
Thanks! Great info and walkthrough.
Great. I broke my screen smashing the like button. At least my cigar didn’t catch my garage on fire 🔥
Great stuff, especially the foul weather suit - that is suffering for your art. Looking forward to more cool $hit!
You got that right! It was hot as hell in that thing 😂
Well I'm definitely going to do that now. Looks awesome.
Took 5 seconds to decide to subscribe. Also, its about time RUclips suggest something awesome. Fucking cool.
I just got a Tenacious so now that I see this, I'm even more excited brother!
Perhaps another idea for mansh*tmonday... a sharpening video ? Or have you already done that? At a quick glance through your videos, I couldn't find one..
*I like your videos bro... I especially liked the "clear ice" video. :)*
*anyway, just stopped by to say hi*
Just started watching love it. You hit all the good stuff out the park
Excelent vid, Jeremy. Can't wait to get started on this. I do want to wait till it's about 100 here in Tampa.
Absolutely an amazing video. It’s criminal he doesn’t have more subs
An extra thumbs up for the cigar while you work 👍
This guy cracks me up. Great content
Thanks brother!
Knice vid bro. I sharpen knives for a living, so hats off to you. Spydies are a great blade as well. Also like Chris Reeves Sebenza 21s and any plunger locks. Cheers
Helpful hint try putting the fingernail polish on the sharpened edge.
Those monarchs playing cards are dope should have reviewed them
Nice video and congrats on the 100k! Get that plaque! Now that you're 100k we need a Man Shit Monday, Man Shit Tuesday, Man Shit Wednesday, Man Shit Thursday, Man Shit Friday, Man Shit Saturday and you can relax on Sunday with the family! :P
😂 thanks 😊
You took a $50 knife and made it look like a $200 knife. Kick-@$$ man
Thanks brother! Glad you liked it 👍🏻
that came out extremely good!
first video I've seen of yours and I instantly subscribed. Great video. Love how you give diy as well as money bought tips. Good to have both as I'm just starting out restoring blades and hopefully eventually forging my own. I actually have a knife I think this would look awesome on so thanks.
Awesome video! Thanks for making this available. I’m definitely going to have to try this. I love how you explain that it doesn’t have to be an overly complicated or expensive project. Just subscribed too.
Dope channel… production is flassless
When you put on the rubber suit in the 100 degree garage I had to sub
Just found your Chanel and boy am I glad.. great content can't wait to pimp out my knife collection .. hope to see more knife videos with my subscription
great video my guy. just did this to my benchmade two weeks ago
One of my favorite customizations! Looks great! Love me some Benchmade by the way 👍🏻
Can you finger nail polish the blade edge?
When you re-sharpen the edge, you're grinding away material, so the edge will be lighter naturally.
That is really cool looking.
Awesome job Jeremy. Those look sweet. Any chance of a video on how you sharpen your knives? Every time I try to sharpen mine, I wind up hacking them up. Love the channel man. Keep it up.
Yeah, lots of knife stuff on the books. I’ll definitely do a little something on sharpening 👍🏻