Hey devin I was wondering if maybe sometime you could go over your full collection/ what you use to wash your cars? Favorite soaps and products and tools/scrubbers and etc! Would be greatly appreciated.
Man sometimes I find when absolutely everything is going wrong, walking away for like an hour man or even the day and coming back. We get so frustrated we make more mistakes. Real mechanic shit man and I find it cool that you show us this because most youtubers only bring us the growth
Your work ethic and dedication to having a perfect car makes me feel very lazy yet also motivates me! Still scratching my head trying to figure out how you will put that all back together and remember where every bolt goes! You must be a beast with legos and tetras! Keep up the great videos! Love seeing a older evo getting all that love!
Happy birthday my man. Love your content for the past years, I wish you keep growing and getting the recognition you deserve for your hard work and passion. You’re truly one of the best.
Using raptor liner for undercarriages, wheel wells, etc. does work, but the prep is pretty time consuming and tedious. You have to scuff everything real good (not to bare metal but enough to scuff the surface. Just like how you would before spraying a bumper in primer) but the main complaint I’ve had after doing customers wheel wells and undercarriages is the road noise seems to not diminish at all. I’ve used some of the 3m undercoating in a can (like $50-$60 for 4-5 cans) and that seems to do a decent job with road noise in wheel wells after bedlining them. Hope this helps. Tool I would suggest for scuffing is a nylon cup brush attached to a buffer for best scuffing and least time consuming. This is what I use for bedliners in the bed, and undercarriage. Clean and power wash after scuffing obviously
the POR-15 is a phosphate coating that convert any surface rust into a hard phosphate coating and stops it from rusting again but if you use that then you can then use a bed liner over that to make sure its protected from rock chips and Happy Birthday as well.
Happy belated birthday and thanks for the content! I just moved from Florida to Washington state and I hope to see your projects one day. You’re the man Devin and super humble keep up the great work
Happy Birthday Devin 🎂 , I have used chassis saver in the past on the under Neath of cars and frames and has always held up and plus u don't have to sand it all the way down to bare metal
I was actually planning on raptor lining underneath my wrx as I’m pretty much doing the same thing as you and powdercoating everything underneath. Not sure how it’ll hold up but I have it on my truck bed and love it plus it’s really easy to spray. Only complaint I’ve heard from people is it’s not gonna soak up as much road noise as a rubber undercoating
Rhino liner is great, just need to give a good degrease and spray. You can also tint it if you want to colour match, I think you will be happy with it and its ease of application. Tip, of you buy the applicator gun money well spent
I undercoated my car with raptor liner and it turned out awesome. No need to get it down to bare metal but you should definitely hit everything with a scotch brite. Also cover all of your stuff with plastic or make some sort of booth because that overspray gets on EVERYTHING and is hard to get off
Dry ice blasting.. I would strongly recommend doing the entire undersude before coating. You've put so much into the car already, why skip out on proper prep underneath. Just a suggestion.
Have you thought of dry-ice blasting the underside? Safe for rubbers and plastics and cleans paint without damaging it or leaving any solvent residue or water. Downside is just the time and expense of the equipment and the CO2.
The problem with raptor liner is that its nearly impossible to tell if it has been punctured and allowing moisture in between the sealant and the metal, which can create a bigger issue. This is why most winterizing undercoating's are made of lanolin or other oils because they can coat and seal the metal, without trapping excess moisture.
Raptor will be an interesting undercoating, I'm interested how a polyurethane will apply and work. I still plan to stick with cosmoline and fluid film type products on mine until I see easier and more effective for a DIY guy
hey devin. while youre at it can you add the rear rigid collar for experiment to see if it does make any difference in driving feel? i read online it can align the chassis and subframe too
I heard the reason people don’t like raptor liner for under coating is because if a little bit tears water and dirt/grime builds up inside of it and can cause rust
Motionautotv has done raptor liner all the time on alot of cars only thing is its such a thick coating it has been said it doesn't allow the chassis to flex
Definitely look into getting new hubs... most vehicles they are fairly cheap sometimes you can get them as a kit with the bearing. I use these on customer cars all the time. Those hubs you have look pretty nasty in the video! Just a thought! Loving the content man! Keep it coming!
Hey devin I was wondering if maybe sometime you could go over your full collection/ what you use to wash your cars? Favorite soaps and products and tools/scrubbers and etc! Would be greatly appreciated.
Second this
only car youtuber i can stand to watch
Devin, Smeedia, Baderbuilt are my go-to RUclipsrs! Some of the most underrated people on this platform
Bro same. I fall asleep watching everybody else🤣
And he works hard and doesn’t go “MY BRAND NEW 6 FIGURE PROJECT CAR!!!”
Facts
@@brennanthewizard9252 they they only ones I watch on RUclips. Other than BoostedBois. But everyone else is a sellout
Man sometimes I find when absolutely everything is going wrong, walking away for like an hour man or even the day and coming back. We get so frustrated we make more mistakes. Real mechanic shit man and I find it cool that you show us this because most youtubers only bring us the growth
Your work ethic and dedication to having a perfect car makes me feel very lazy yet also motivates me! Still scratching my head trying to figure out how you will put that all back together and remember where every bolt goes! You must be a beast with legos and tetras! Keep up the great videos! Love seeing a older evo getting all that love!
Happy birthday my man. Love your content for the past years, I wish you keep growing and getting the recognition you deserve for your hard work and passion. You’re truly one of the best.
I just wanna wish you happy birthday Devin hope you had a wonderful day
Nothing like coming home from work and seeing there's more Evo content. Thanks Devin
Using raptor liner for undercarriages, wheel wells, etc. does work, but the prep is pretty time consuming and tedious. You have to scuff everything real good (not to bare metal but enough to scuff the surface. Just like how you would before spraying a bumper in primer) but the main complaint I’ve had after doing customers wheel wells and undercarriages is the road noise seems to not diminish at all. I’ve used some of the 3m undercoating in a can (like $50-$60 for 4-5 cans) and that seems to do a decent job with road noise in wheel wells after bedlining them. Hope this helps. Tool I would suggest for scuffing is a nylon cup brush attached to a buffer for best scuffing and least time consuming. This is what I use for bedliners in the bed, and undercarriage. Clean and power wash after scuffing obviously
Happy Birthday Dude!
Cant wait for the merch drop!
Digging it!👍
Happy Birthday Devin
Love the hard work you put in everyday.
the POR-15 is a phosphate coating that convert any surface rust into a hard phosphate coating and stops it from rusting again but if you use that then you can then use a bed liner over that to make sure its protected from rock chips and Happy Birthday as well.
Happy belated birthday and thanks for the content! I just moved from Florida to Washington state and I hope to see your projects one day. You’re the man Devin and super humble keep up the great work
Love all this content man. Keep up the hard work. You a real one by dude.
Happy birthday, friend. Wish u continued success and more subs!! Content killer!
Happy Birthday Devin! You deserve greatness! Best RUclipsr hands down!
Happy Birthday Devin 🎂 , I have used chassis saver in the past on the under Neath of cars and frames and has always held up and plus u don't have to sand it all the way down to bare metal
Happy Birthday Dev! I've watched your channel every drop for over 2 years. Feel like your buddy now. Lol
I was actually planning on raptor lining underneath my wrx as I’m pretty much doing the same thing as you and powdercoating everything underneath. Not sure how it’ll hold up but I have it on my truck bed and love it plus it’s really easy to spray. Only complaint I’ve heard from people is it’s not gonna soak up as much road noise as a rubber undercoating
we'll keep on supporting you brother. happy birthday Dev! Keep boosting in life and have a blast! No 1 fans from Malaysia. Salute!!
Happy Birthday Devin!!! love your content.
Rhino liner is great, just need to give a good degrease and spray. You can also tint it if you want to colour match, I think you will be happy with it and its ease of application. Tip, of you buy the applicator gun money well spent
You and Jared ripping around in the FR S is too good. Do more rippers with him pleeeeease. Happy Bday Bros! Fireball shots for the win
I undercoated my car with raptor liner and it turned out awesome. No need to get it down to bare metal but you should definitely hit everything with a scotch brite. Also cover all of your stuff with plastic or make some sort of booth because that overspray gets on EVERYTHING and is hard to get off
I can’t buy the new shirt because my OCD is mad there’s no apostrophe in “youre”. Stoked to see what the other 49 products are you’re dropping!
Happy birthday my man🔥
Happy birthday Devin ! Hope you have amazing birthday and many more to come.
Happy birthday! Hope that hangover wasn't too bad. Cheers!🍺
Dry ice blasting.. I would strongly recommend doing the entire undersude before coating. You've put so much into the car already, why skip out on proper prep underneath. Just a suggestion.
Devin I hope you had a awesome birthday , much love brother 🙌
happy birthday devin, huge huge fan of all of your builds, a new day and new age for you🥳🥳💯
For good wishes it's never too late, so...
Happy Birthday and all the best to You. 🎉🎊🍻🥂👍
HAPPY BIRTHDAY, DEVIN.
Loves the consistent video uploading😊
Hey Devin, when you say you redid the ceracote. Did you have to strip+blast them? Or just spray an extra coat? Thanks for the content, love it!
Have you thought of dry-ice blasting the underside? Safe for rubbers and plastics and cleans paint without damaging it or leaving any solvent residue or water. Downside is just the time and expense of the equipment and the CO2.
The problem with raptor liner is that its nearly impossible to tell if it has been punctured and allowing moisture in between the sealant and the metal, which can create a bigger issue. This is why most winterizing undercoating's are made of lanolin or other oils because they can coat and seal the metal, without trapping excess moisture.
happy birthday again to my favorite youtuber DEVIN🎉
Happy birthday bro, wish you the best for all your future build's and life happenings, I would love to see an RB or 2J build on the channel
Happy birthday Devin bro wish you the best day!!
Happy birthday bro don’t get to hammered 😂 have a good ass day dude u deserve it
Smells like perfection
Happy birthday man hope you had a good one and enjoying the content as always man.
Have you looked into getting your own plating kit? They're not terribly expensive.
Raptor will be an interesting undercoating, I'm interested how a polyurethane will apply and work.
I still plan to stick with cosmoline and fluid film type products on mine until I see easier and more effective for a DIY guy
happy birthday Devin!! U r da man!!! keep up the quality content!
Think you should've labeled them bolts 🔩 so it'd be much easier when it's resemble time plus I hope you enjoy your 365 bro happy birthday 💯💯💯💯💯
Happy birthday Devin 🎉🎉🍻
hey devin. while youre at it can you add the rear rigid collar for experiment to see if it does make any difference in driving feel? i read online it can align the chassis and subframe too
Happy birthday man! Hope you had good one.
happy birthday devin ... thank's for your daily content, great stuff, love it :)
Dan Chambers RUclips channel has used ceracote recently and used a blow torch rather than an oven? Worth a try?
Happy birthday Dev! 🏎
Hope you had a great birthday you deserve it!
Happy Birthday my friend. My God bless you to have many many more.
Happy Birthday Devin du Restorator✌️✌️✌️
Happy birthday Devin for today hope you have a good one
Happy belated birthday enjoying all your vids being evo owner and mechanic its very interesting too see different jobs being done
Happy Birthday Devin 🎂 🥳 🎉 🎈 🎁 🎊
Happy birthday bro,hope you have a nice day!
I heard the reason people don’t like raptor liner for under coating is because if a little bit tears water and dirt/grime builds up inside of it and can cause rust
There should be a tool for the hub bearing spindle getting stuck at autozone I believe to separate it
Need to collaborate with Cameron Alford 🙌 I’d love to see it! Keep up the grind bro
Hey man happy birthday. We have the same birthday. Leo pride!
8:58 that woah had me dead
Happy Birthday Devin!!!
Happy birthday man!!
Happy birthday 🎂🎈🎊🎉 Brother 🔥💯👌🏽 Enjoy
Damn it dude, it's been like day 7 or 8 I've been binging hard 🤣🤣 love your content brutha! motivating me to get my own shop and toys
🔥🔥🔥Greetings from Poland
Happy birthday DEVIN 🎂🎈
Happy birthday from Kuala Lumpur Malaysia
Happy Birthday Devin!
Happy Belated Birthday Devin
Do it right once. Lynex or por 15 for weight savings.
Happy one Devin!! Love the content btw xp
Happy birthday brother love your work.
Hope Bobbie for you a new car for your birthday.
Motionautotv has done raptor liner all the time on alot of cars only thing is its such a thick coating it has been said it doesn't allow the chassis to flex
Happy birthday bro! I hope it's a good one.
Happy b day bro !! Enjoy 8 is coming out real nice 👍
Happy birthday man I love ur videos I love evos
Glad your good bro next time use a ratchet strap on holding whatever onto the trans jack. Happy belated birthday bro 🤙🏽🤙🏽
Evaporust from tractor supply. Takes rust out in no time!!! Try it!
Happy birthday mate. From Australia
You’re the goat
Happy Birthday Devin
Oh I get it, control arms 💪😁
Happy Birthday Devin🥳
Let's goooo. Devin HBD 🙌
happy birthday....hope u had a blast
Happy birthday Devin
Happy birthday Devin! :]
Hppy bday Devin
You really got patience bro
Definitely look into getting new hubs... most vehicles they are fairly cheap sometimes you can get them as a kit with the bearing. I use these on customer cars all the time. Those hubs you have look pretty nasty in the video! Just a thought! Loving the content man! Keep it coming!
Happy birthday Devin...
Happy birthday 🍻
Happy birthday Devin, treat yourself to a new oven lol
Finaly youtube notification works ! I usuly get them 13h late
Happy birthday brother 🎂
Bro. Happy Birthday!