Kia sportage hvac (heater ac) blower "issue" "fix"
HTML-код
- Опубликовано: 10 сен 2024
- In this video I show you where my 2007 kia sportage lx 2.0l manual trans has created a short which ultimately lead to catastrophic hvac blower motor failure. This was located under the hood in the main fuse block or aka tipm.
Thank you!!! I went through all the typical trouble-shooting steps for the blower to no avail. I landed on this video and thought... why not? I found it was the EXACT same wire issue on my daughter's 2007 Kia Sportage. The wire was corroded right at the fuse connector. Fixed the wire connection with a makeshift metal crimp, added some E6000 glue for good measure (and water proofing). Fan works great again!
Awesome troubleshooting!
Thanks for sharing.
Thank you for this video! My friends 2007 Sportage had this same issue, and now it is fixed👍
Can inask how much it cost to fix? I'm dealing with the same issue on my 2006 sportage.
I've had similar issue only intermitent, originally thought FET, but on removing motor there was slight water ingress noticed from pollen filters down. Dried it out and its working again. However, this video and findings is definitely worth checking out as this is the second time its happened now. Great video and info Total Stranger 👍
Wow! Kia could spend 2 extra cents for a rubber grommet to go around that metal. I have a 14 Sportage, and the longer I own the car I'm noticing things like this. Not all vehicles are perfect, but they had to have known that would be an issue.
thanks brother this makes my life so easy and god bless
Thanks for the video, it works now 👍
I cut a small length of vacuum hose and slit it down one side. Then pushed it into position on the edge of that hole where the wiring harness passes into that upper rail. This was a preemptive "fix". I don't have a problem yet in this area, and now hopefully I will never have one. My problem is the blower motor resistor.
Merci s etais ca mon probleme .
My kia sportsge 2007
Only blows cold air when I put the heating on
Iv replaced the thermostat and flushed all fluids ect
Cant figure it out
it's probably the blend door actuator
😁👌 EXCELLENT DETECTIVE WORK ‼️
💪😎👍🧰
😜🤑💰👹🇺🇲
I had the plug wiring to burn up at the MOV at the floor board under the dash.
Thank so much
It’s just not blowing hot air ?
Where is the problem on a 2009 Kia Sportage. No heat or AC.
I have the same problem on my 2012. It's very frustrating
Did you ever find the problem?
I have the same problem, for 2 years now, on my 2008 kia. Even the dealership are stumped
My blower is stuck on hi. Won't shut off.
How did you reconnect the wire?
yes...this is the holiday
My 06 sportage you had to tap the fender to get headlights. I bet this is the problem
My blowers work but even when I turn them off the blowers stay on at full power cant even lower the speed they are stuck on
same problem
You guys ever figure out what the problem was for it staying on. Having the same issue
Yup my 2009 Kia Sportage blows non stop haha I have to keep in between cold and hot so I don’t get cold or to hot lmao
I went at the fuse box on the advice of this video, and didn't find the same problem. I did however find the actual problem, the connection had melted down right at the spade connector. Some images: imgur.com/a/tBPUOHI
If you don't find the problem in the video, it's worth checking to see if this is your problem before you put everything back in.
Can I ask how you fixed it? I have the same issue.
Problem at ignition point
#shootvideosduringdaylight
Problem is at ignition switch conection
You couldn’t wait till light to do video ?
be thankful i even made the video, next time figure it out on your own!!
@ Total Stranger do you think this could be the same on a 2010 model?
@@keithorlowski875 The 2010 is the first year of the 3rd gen model, it will not be the same.
ⁿ
Problem is at ignition switch conection
Please explain more on how to fix.