🔥 Black Friday Deals! (my presets)🔥 🎯 BFGALTONE2024 → 50% OFF (Valid until Dec 3rd) ⏳ ULTIMATE70 → 70% OFF ToneX Ultimate Bundle (24-Hour Flash Sale!) 👉 Use these codes during checkout to save big! Don't miss out! 🎉
Hi, thanks for the updated video. I noticed in your video that when you tap on a footswitch for the first time, you have to tap twice to get the effect to actually switch on. I'm experiencing the same with my setup. Do you know why this happens, and if there's a workaround?
@@strickenstricken2070 zip archive file with .txp files (presets). You need the newest firmware though (otherwise fx won't be available). Then you basically plug in tonex one, open app , click import preset in top left corner, import them. Open librarian - and transfer tones into tonex one. That's it :)
Because you have to click twice depending on a preset (if it already Has delay first click won't turn it off). I tried It first but it is annoying (at least for me.
Thank you very much, your videos are very helpful. I would like to know, because I have seen that you have connected via Bluetooth, if the response of the M Vave pedalboard via MIDI-TRS cable would be the same. Thank you.
@galtonestudio Thanks, but it is not necessary to buy a cable to check it. I have seen in some videos that it works, but for example they are not very explicit when it comes to identifying what type of TRS midi cable it is, whether type A or B. In a few days I will buy an A cable, I suppose it will be this type. I will let you know so I can provide that information in your future videos. Regards.
Unluckily, for now not really - but you can use an app called Midi chief. I'll do a tutorial soon (you can find it online as well). You need to have a phone plugged in, but it works for basic patch changes and tap tempo. Cheers!
🔥 Black Friday Deals! (my presets)🔥
🎯 BFGALTONE2024 → 50% OFF (Valid until Dec 3rd)
⏳ ULTIMATE70 → 70% OFF ToneX Ultimate Bundle (24-Hour Flash Sale!)
👉 Use these codes during checkout to save big! Don't miss out! 🎉
Dude this is so Awesome!!! Thank you for finally helping me out with this thing!!!
Muchas gracias por el tutorial...
La verdad que la cosa ha mejorado muchísimo...
Indispensable un bueno y barato control MIDI...
11:23 Can the EQ block be used as a pre-amp boost?
Really good video
Hi, thanks for the updated video. I noticed in your video that when you tap on a footswitch for the first time, you have to tap twice to get the effect to actually switch on. I'm experiencing the same with my setup. Do you know why this happens, and if there's a workaround?
@@keithdaitken unluckily you can't fix it. That's why i prefer to use long/short press to Control it.
@galtonestudio Thanks
is the JP LEAD available anywhere ?
Sure, JP lead is a part of my DT pack. It's actually based on his tone from Rock Discipline DVD (EX 31) :) ruclips.net/video/_gXE6URF5iA/видео.html
@galtonestudio I have the tonex one, will I be able to use those ? Under which form will they be delivered ?
@@strickenstricken2070 zip archive file with .txp files (presets). You need the newest firmware though (otherwise fx won't be available). Then you basically plug in tonex one, open app , click import preset in top left corner, import them.
Open librarian - and transfer tones into tonex one. That's it :)
@@galtonestudio Thanks a lot, sounds fantastic !
Why not use mode 2, which toggles between two different commands, e.,g., press once to enable, press again to disable?
Because you have to click twice depending on a preset (if it already Has delay first click won't turn it off). I tried It first but it is annoying (at least for me.
yeah, it's too bad there is no visual feedback on the Chocolate. On the up side, you can disable faster in toggle mode than in long press mode.
Thank you very much, your videos are very helpful. I would like to know, because I have seen that you have connected via Bluetooth, if the response of the M Vave pedalboard via MIDI-TRS cable would be the same. Thank you.
I will check it out tomorrow with adapter. If that won't work i will buy a trs-midi cable and let you know. Thanks!
@galtonestudio Thanks, but it is not necessary to buy a cable to check it. I have seen in some videos that it works, but for example they are not very explicit when it comes to identifying what type of TRS midi cable it is, whether type A or B. In a few days I will buy an A cable, I suppose it will be this type. I will let you know so I can provide that information in your future videos. Regards.
I'll see if I can do it with Airstep. Thank you for posting the video.There is no midi additional manual on the official website yet.
Will it work with airstep lite? Probably with Bluetooth to midi converter needed? Is 20ms latency between AIRSTEP and smart devices a problem?
The MIDI controls are documented in the regular TONEX manual, as well as in the unofficial "MIDI Compendium"
Is it work with Tonex One?
Unluckily, for now not really - but you can use an app called Midi chief. I'll do a tutorial soon (you can find it online as well). You need to have a phone plugged in, but it works for basic patch changes and tap tempo. Cheers!