Snap pistol writeup: The NomShot

A step by step voice over how to guide for making your very own pocket sized snap pistol, great first gun for beginning modders amazing sidearm for pros! Blaster was designed with an ideal power to size ratio, and at only two inches longer than a nite finder, this blaster packs one heck of a punch, and hits ranges upwards of 85 feet! That's much better than any nite finder can do!!!
Parts: 5.5inches of any spring (ideal k25 or k26)
8 inches of 1.25 inch pvc
14 inches of CPVC
1.5 inch rubber washer (you may need replacements eventually)
12 sheet metal screws
1 plastic clothespin
1.5 by 1.5 inch L bracket
cpvc tee
cpvc endcap
a short segment of 1.5 inch pvc
a 1.5 inch by 4 inch by 1/2 inch piece of scrap wood
2x 1in by 1/2 pvc bushings
2 inch long bolt
3x matching nuts
2x matching inner diameter, with 1.25 inch outer diameter washers
3x zip ties (optional)
Electrical tape (optional)
tightly fitting O-ring to go around front bushing (optional)
How trigger works: nerfhaven.com/f...