И мелканы)), один из моих экземпляров даже в ментовке на стенде красовался, я их как пирожки точил. Напильник и ручная дрель... таких наверное и не выпускают сейчас. Вот это были ощущения!
@@krestinoliki1836 внучёк, сейчас я тебе расскажу, как мы в 70-е с помощью ножовки по металу, напильника, пилы по дереву и ножа, в разы лучше делали пистоль именно под 22 lr, а не под пистон как у тебя. Шли на шахтный двор и с гидростойки отпиливали цельнотянутую трубку высокого давления с толщиной стенок около 3 мм и внутренним диаметром 6 мм чуть прослабленный под мелкашечную гильзу, стреляные гильзы собирали на ДОСААФовском стрельбище, пробивали по середине шляпки гильзы цыганской иглой отверстие и клеили бумажный пистон, в гильзу если не могли достать порох, чистили серу со спичек, пыжевали, и вкладывали или дробину, или шарик с подшипника по диаметру. А сам пистолет вырезался из дерева, у меня была возможность, был из текстолита, крепился ствол и шпингалет подпружинивался, или резинкой с бинт резины, или подбиралась пружина. Дальше, кто большим пальцем поднимал ручку шпингалета и засов бил по пистону на патроне, у кого руки не с жопы, те делали УСМ. А своё одоробло выкрась и выбрось.
It's a bit strange design as normally, you want a rather long-ish barrel and proportionally small striker. This pistol has a tiny barrel but a _huge_, rifle-like striker...
yeah absolutely. bc is gonna suffer like crazy with the barrel so short. should have made the barrel longer and moved the chamber and action back in order to keep the same oal. he has the tools to do it much better. probably just the simplest thing he came up with at the time. 1st or 2nd prototype. but it woks ok.
Open bolt restriction probably only applies in the USA. Given that it's a single shot pistol it probably would not apply even then. Now, if he added a magazine, he'd have a machine gun. Which would be a totally different kettle of fish.
Good vid man. New sub here. Great idea using the bondo! That gives me several ideas for different projects im doing.... I never thought of using bondo!! Also, the smack talkers in the comment section are JEALOUS LOSERS. Please dont pay them any mind... They shit post all over youtube, cause they dont have the talent or skill to become content creators like you have done ... Theyre little boys, and sometimes they act like total bullies.. Screw em'! Ignore em'!
I am a new subscriber. I am very impressed with your abilities. I can't wait to see all of your videos. Thank you for taking us on your adventure through mechanical engineering. Hello, for Detroit, Michigan USA.
В детстве быстрей собирал ружбайку. Кусок доски, трубка под патрон от мелкашки, шпингалет и резинка. При определенном затачивание шпингалета гильза вылетала автоматически после выстрела 😂. Однажды друг её поймал грудью, крови было много. Врали как могли чтобы родители не узнали 😂😂😂
А у нас у одного мелкан осечку раз 100 дал, он решил перед девчонками красануться, к виску поднёс... и зарыли. Да ули там, я сам дружбану ради прикола меж глаз целился, а он, типа: - да давай мне пох.. а у меня крючок через пружину перескочил с щелчком, я чуть и не обделался). До сих по вспоминаю и шерсть дыбом встаёт. Я их тогда ка семачки, в неделю по 5 штук точил)
@@drpcr7Yes. That is why he is wearing them. Many people do. Also to avoid sparks. However, once you have seen someone get their hands dragged into a machine by their gloves, you will never wear them again. It is horrible to see. Also, it isn't necessary to over-heat a part when grinding. You go slowly and you don't get burnt. Or use vice-grips. By the way, I do accept that a grinder can be less "grabby" than many other rotating tools, but it remains bad practice to wear gloves. I am not criticising the guy, I just think we machinists should share our experiences with one another to keep ourselves safe.
If my neighbors have all that equipment here in the Philippines , they can make a full automatic M4 or M16, but in your case you made a single shot 22 pistol. Why?
Making barrels dude and uppers is another ball game. Plus I’m pretty sure this vid was made to show how easy some things are to make, plus it’s his own design he came up with, to make M16s and M4 clones would take a lot of skill and year of perfection and schooling
Sadly the m4 and m16 etc. are being bought and used by terror groups and criminal organization here in the Philippines you can see it in news everyday, one example is the 2016 marawi siege mostly all the guns used by the terror are backyard made.
Spectacular job Brother thank you for sharing your knowledge and expertise and for taking us on your adventures through Mechanical engineering Side note bondo, you can put lipstick on a pig. You still have a pig, but damn that is a sexy pig.😂😂😂
I could be wrong, but I think open bolt guns are illegal, because they can be easily converted to machine guns. I see yours is a single shot, but still. . .
This quality of equipment...you could make a 5 cal sniper rifle....i seen home made shotguns in Thailand ..that use hacksawas n a file .n shells.. looking good while doing it ...single barrel...put those foriegn coins in and itd stop a rhino .
Can you make an over-engineered nerf gun? Specifically, there is a Nerf gun that is similar to this, called the Rifling Swin. It's almost functionally the same as this, with some minor differences.
Lets see your content..... Oh, you got nothing but words. Get a grip boy. You just go around to content creators and talk smack?? Is that what moves you? Is that fulfilling and edifying in your small (boys) world?? Meanwhile, this MAN is down in the shop, getting his hands dirty, testing new materials in cap gun manufacturing, (bondo) Using his mind, this MAN has planned and gave us a demonstration of HIS design. He spends his time USING his tools, gaining insight and practices his trade.. He doesn't ask us for one single thing, does he? He just puts his work out there for anybody to watch. I would say he gains by doing this, that he really LEARNS SOMETHING by doing this.... (You, not so much, boy) Not to mention... He started his youtube channel, he recorded and edited vid... uploaded it, etc what did you do boy??
Thank you for not adding unnecessary music; the sound of the metal parts being worked is so much better.
Красиво получилось. Как раз на шесть лет тюремного заключения )))))))))))))
Не, по первому разу много не дадут. В России. А в США за это даже административки нет.
Nice sharing👍
Thanks for visiting
Another quality production by the ATF !
Shhh the nsa might be watching
1st class quality😀😀😀
В детстве при помощи дрели и напильника такие же игрушки собирал только под строительные патроны и шарики от подшипника)))
И мелканы)), один из моих экземпляров даже в ментовке на стенде красовался, я их как пирожки точил. Напильник и ручная дрель... таких наверное и не выпускают сейчас. Вот это были ощущения!
I don't care what anybody says nice work
Что-бы с пистона стрельнуть, надо было 1,5 кг железа нагородить?
Можно в перед пистона пороха и пулю вальнуть
Будет стрелять
при создании боевого оружия уходит до 5кг металла, так что не плач дед.
@@krestinoliki1836 при чем здесь боевое оружие, к этому одороблу? С дуру можно и фуй сломать, так нужно было видео назвать.
@@alekspog1502 дед иди таблетки попей, он не потратил лишнего металла на самопал под .22 лр.
@@krestinoliki1836 внучёк, сейчас я тебе расскажу, как мы в 70-е с помощью ножовки по металу, напильника, пилы по дереву и ножа, в разы лучше делали пистоль именно под 22 lr, а не под пистон как у тебя. Шли на шахтный двор и с гидростойки отпиливали цельнотянутую трубку высокого давления с толщиной стенок около 3 мм и внутренним диаметром 6 мм чуть прослабленный под мелкашечную гильзу, стреляные гильзы собирали на ДОСААФовском стрельбище, пробивали по середине шляпки гильзы цыганской иглой отверстие и клеили бумажный пистон, в гильзу если не могли достать порох, чистили серу со спичек, пыжевали, и вкладывали или дробину, или шарик с подшипника по диаметру. А сам пистолет вырезался из дерева, у меня была возможность, был из текстолита, крепился ствол и шпингалет подпружинивался, или резинкой с бинт резины, или подбиралась пружина. Дальше, кто большим пальцем поднимал ручку шпингалета и засов бил по пистону на патроне, у кого руки не с жопы, те делали УСМ. А своё одоробло выкрась и выбрось.
Quite good work on the details of the not real - firecracker object. Bravo!
Трубка, шпингалет, пружинка или резинка на деревяху за пять минут тоже самое делали в детстве
судя по всему, дядя думал о другом, но съехал на пистон))))
эйэй! не раскрывай секрет! у них шпингалеты не производят!
@@Slash25773 да... шпингалет вещь хорошая, почти готовая)))
Данила бы не одобрил)
Кто знает чем он железо мазал? Какой-то полимер?
It's a bit strange design as normally, you want a rather long-ish barrel and proportionally small striker. This pistol has a tiny barrel but a _huge_, rifle-like striker...
Still cool nonetheless!
yeah absolutely. bc is gonna suffer like crazy with the barrel so short. should have made the barrel longer and moved the chamber and action back in order to keep the same oal. he has the tools to do it much better. probably just the simplest thing he came up with at the time. 1st or 2nd prototype. but it woks ok.
Cool..looks fantastic. Great upload
Design is awesome!
Very nice. 1 more step and you could Have had a blow back
Nice work but, its disappointing that the live ammunition is just a clickbait
el gatillo esta muy sensible ..ajusta eso que es muy peligroso!!
Excelente video maestro ,y para q calibre es ,x fa
That’s really cool it shows how simple it is it’s just a pipe with a closed end, essentially!
Reinvent the inline muzzleloader into a pistol is what you have done
Подготовка к звездным войнам . Аборигены межгалактические будут в шоке от неизвестной им развитой цивилизации .
Para cal 22, queda. Excelente.
Awesome 👌
Excelente idea 💡💡💡
Need you to make inward parts to Sabata's gun
How to buy this product sir tell me
Es un Matagatos, cuando era chico hice como 10
Very interesting, thank you! What kind of percussion caps are these? They look like the ones in toy guns.
it is.
disegner ttecnical ????
Hello dear friend I can only watch you build it ,i can't build it me can hardly catch the styles 😊
This is indeed very interesting
Top de mais amigao
Short barreled low velosity. Nice if that is all you can get . Illegal if fired from open bolt.
Open bolt restriction probably only applies in the USA. Given that it's a single shot pistol it probably would not apply even then. Now, if he added a magazine, he'd have a machine gun. Which would be a totally different kettle of fish.
con una impresora 3d y esa mano de obra , podrías sacar tu propia marca 🤘
такой большой затвор и такой маленький по длине ствол говорит о точности стрельбы)
Good vid man.
New sub here.
Great idea using the bondo!
That gives me several ideas for different projects im doing....
I never thought of using bondo!!
Also, the smack talkers in the comment section are JEALOUS LOSERS.
Please dont pay them any mind...
They shit post all over youtube, cause they dont have the talent or skill to become content creators like you have done ...
Theyre little boys, and sometimes they act like total bullies.. Screw em'!
Ignore em'!
I wonder if you could put the firing pin on the pull back and a 22 bullet in the end instead to shoot 4real
При столь огромных размерах совершенно маленький ствол. Все должно быть наоборот.
Not illegal if it is a muzzleloading pistol. If Cartridge rimfire or centerfire itwould be considered illegal.
Are you speaking for all countries in the world??? RUclips videos aint just watched by americans you know!!!
How to get 5 with the section 5. Take it from one who knows, read that disclaimer at the start very carefully!
Это же детская игрушка получилась, пистонами стреляет. Красные пистоны в концилярских Максим магазинах продается.
За эту игрушку любой следак статью сразу сконструирует.
Я тоже в школе делал себе трубку - харкалку! Плевалась жеванной бумагой!
Do you have any of these to sell? I'm from Brazil, I'm interested
Thank you
I am a new subscriber. I am very impressed with your abilities. I can't wait to see all of your videos. Thank you for taking us on your adventure through mechanical engineering. Hello, for Detroit, Michigan USA.
В детстве быстрей собирал ружбайку. Кусок доски, трубка под патрон от мелкашки, шпингалет и резинка. При определенном затачивание шпингалета гильза вылетала автоматически после выстрела 😂. Однажды друг её поймал грудью, крови было много. Врали как могли чтобы родители не узнали 😂😂😂
А у нас у одного мелкан осечку раз 100 дал, он решил перед девчонками красануться, к виску поднёс... и зарыли. Да ули там, я сам дружбану ради прикола меж глаз целился, а он, типа: - да давай мне пох.. а у меня крючок через пружину перескочил с щелчком, я чуть и не обделался). До сих по вспоминаю и шерсть дыбом встаёт. Я их тогда ка семачки, в неделю по 5 штук точил)
Столько мучался однозарядный пугач сделал Я в юности за неделю домашних условиях револьвер сделал на шесть патронов мелкашки 😂
А?в верх как стрелять?кто патрон будет держать?
Please do not wear gloves near rotating machinery.
Took me an hour to explain this to a safety guy at work.
But he is only wearing gloves because of the heat. If he would do it with bare hands he would get burnt by his fingers.
@@drpcr7Yes. That is why he is wearing them. Many people do. Also to avoid sparks. However, once you have seen someone get their hands dragged into a machine by their gloves, you will never wear them again. It is horrible to see. Also, it isn't necessary to over-heat a part when grinding. You go slowly and you don't get burnt. Or use vice-grips.
By the way, I do accept that a grinder can be less "grabby" than many other rotating tools, but it remains bad practice to wear gloves.
I am not criticising the guy, I just think we machinists should share our experiences with one another to keep ourselves safe.
@@Carl-sh7kfVery very true
Said the carpenter when he lost his last finger
My man got the Harbor Freight starter kit
If my neighbors have all that equipment here in the Philippines , they can make a full automatic M4 or M16, but in your case you made a single shot 22 pistol. Why?
Making barrels dude and uppers is another ball game. Plus I’m pretty sure this vid was made to show how easy some things are to make, plus it’s his own design he came up with, to make M16s and M4 clones would take a lot of skill and year of perfection and schooling
😂
Sadly the m4 and m16 etc. are being bought and used by terror groups and criminal organization here in the Philippines you can see it in news everyday, one example is the 2016 marawi siege mostly all the guns used by the terror are backyard made.
Here in America we have the ATF to worry about, We can't just go on making fully automatic firearms
because he inferior than you
Spectacular job Brother thank you for sharing your knowledge and expertise and for taking us on your adventures through Mechanical engineering Side note bondo, you can put lipstick on a pig. You still have a pig, but damn that is a sexy pig.😂😂😂
I didn’t search this up atf I accidentally clicked the vid
Мы в детстве такире под 22 калибр сами делали...
what metall is the pipe
Good 😮
Whats that putty u put sir?
Eu fiz uma desse modelo mas com pente ferrolho igual de pistola calça bala 22 e da 15 disparo
В России это ст. 222 Уголовного кодекса
Reduce firing system because ring cap doesn’t require a lot of force and increase barrel length to 4 inches now you have a powerful muzzleloader
I could be wrong, but I think open bolt guns are illegal, because they can be easily converted to machine guns. I see yours is a single shot, but still. . .
😂😈
Looked like a cap gun... Or black powder cap and ball
@@killium2 in fact, actually it's 😁😈
beautiful and interesting gun???)))
厉害。
Pwede ba ako mag order po nyan
Can i buy thi weapon?
Hi very good
THE BEST
It's beautiful
Can u make a video firing the gun at a target
💪💪💪💪👍👍👍
С токаркой это не интересно.
lit hases todo lo anterior y agrandas el diametro del cañon de forma de que quepa un 22lr y tienes una pistola echisa
Hello 🤩 thanks for your video 🤠... what is it for steel please?
😂😂bro don’t create this at home. It’ll explode on u prolly nd ur gna go jail
@@DonAl_Capone off course 😉 it's just for now...I like steel and the different steel..... that's why I want to now, but thanks for your answer ❤️👍😘
Bondo?and primer? This is so dangerous. I think the only thing reliable about this 'firearm' is that you can rely on it not being reliable, or safe
It shoot projectile, it acomplishes its intented desigh its a good work, better than having nothing
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
অসাধারণ গল্প। গল্প পড়েতে পড়তে চোখে জল ধরে রাখতে পারলাম না। ধন্যবাদ।
How to avail and how much
This quality of equipment...you could make a 5 cal sniper rifle....i seen home made shotguns in Thailand ..that use hacksawas n a file .n shells.. looking good while doing it ...single barrel...put those foriegn coins in and itd stop a rhino .
i have the vice and circular grinder. 😂
Heavy metal..y not use polymer..for advance revh na now ..
Nice
Terrible arma, si ,de destrucción masiva, podria ser mejor en madera.
AK 7.62
Super ❤😊
why show the bullet in the intro picture?? and bondo used? really
без патронов можно убить кого хочешь
Tutto questo lavoro per esplodere una capsula per pistola giocattolo.
not fully understand the assembly of barrel
I wouldn't bondo i think the natural steel is pertier
Puedes compartir medidas o instrucciones para fabricar una porfavor
Can you make an over-engineered nerf gun?
Specifically, there is a Nerf gun that is similar to this, called the Rifling Swin. It's almost functionally the same as this, with some minor differences.
👍👍👍👍😎👍👍👍😁
ст.222 и 223 ук рф. п.с. не проще ли лицензию взять и купить легальное оружие?
отличное пособие для тех, кто хочет присесть лет на 5
Если стрелять по банкам в глухом лесу, то вряд ли присядешь
Not everyone has a machine shop in their garage 😡
esta puede tener un foco en el ser humano?
Yeah, real genius wire wheel polishing the square stock handle before you weld it to the gun might’ve been a good idea
Lets see your content.....
Oh, you got nothing but words.
Get a grip boy.
You just go around to content creators and talk smack?? Is that what moves you? Is that fulfilling and edifying in your small (boys) world??
Meanwhile, this MAN is down in the shop, getting his hands dirty, testing new materials in cap gun manufacturing, (bondo)
Using his mind, this MAN has planned and gave us a demonstration of HIS design.
He spends his time USING his tools, gaining insight and practices his trade..
He doesn't ask us for one single thing, does he?
He just puts his work out there for anybody to watch.
I would say he gains by doing this, that he really LEARNS SOMETHING by doing this....
(You, not so much, boy)
Not to mention... He started his youtube channel, he recorded and edited vid... uploaded it, etc
what did you do boy??
改大拇指壓擊 就是東亞槍
Поделка школьника семиклассника из СССР, под мелкашечный патрон
This assassins pistol 😂😂😂
สวยจัง
This video was made for the Canadians and Californians