Great and useful video. Thanks alot ...i am so glad it finally got implemented. Cause i am just learning to master the RB 75 and this will make it a lot easyer .
If somebody doesn't get it from the video itself, you should do this: in Control Options use...Select Data Cartridge UP / Select Data Cartridge Down Odgovori
Hmm, I haven't actually tried adding Airfields, and I'm not sure if they would work either way. But you can add the codes for landing and takeoff airfields manually. Here are the available input codes: www.viggentools.se/assets/CK37_Input_Codes.png
Glad you liked it and I hope it helps. And I might fiddle with my gamma settings a bit. But it could also be video rendering and youtube's compression acting up as that happens sometimes. But I'll check how things look in game. Thanks for pointing it out!
Yes you can use the waypoints for the RB-15F, we tried it out in my squadron yesterday with the convoy attack mode and it worked out beautifully which is very nice.
Quick question does F10 Map Market work in MP?, I followed your video, went to the kneeboard and with the waypoints I make in the Map (B1-B5) there was nothing.
@@f900ex5 Hmm, strange, last time I tried it online it worked for me. But it could be that some servers have disabled the attack cartridges in the kneeboard as I think there is an option for it in the mission editor. Only advice I can give other than that is to double check your cartridges and mark points.
Do you mean the mobile groundcrew? If so then unfortunately I don't know of any way to change them. As for the regular ground crew they should have a dropdown list on the right side of the rearm & refuel menu where all your saved mission loadouts should be.
@@Stoffe3D It is a shame you can't change it as some of the weapons like the Rb75B isn't on there. Though I guess you could possibly modify a file somewhere to make your own loadouts. But I'm not sure if that would work at all.
Är det svenskar som jobbar med en utav favoritmodulerna i DCS? Där ser man! Bra jobbat! Fortsätt så. Kul att se också att Hoggit höjjer er till skyarna! (Förlåt, det är en sjukdom)
Ja det verkar vara en del Svenskar som jobbar åt Heatblur/Leatherneck simulations. Och hittils så har dom gjort ett väldigt bra jobb med sina moduler tycker jag.
@@Stoffe3D Glad you were able to sort it out, I have seen that one take a different data cartridge number as well. So looking through them all is also useful.
@@Badjoe117 Yea. im having difficulties to change cartridges in air also thou. Have you had any luck in swithing fram ATTACK to the regular F10 mark cartridges?
@@Stoffe3DI think it is best to pick what cartridge you want on the ground since the INS might get a bit confused otherwise. And I haven't tried that as I usually just use the ATTACK mark to find out QFE and all that information. But switching from F10 to ATTACK did mess up the ATTACK waypoints for me a few times.
@@Badjoe117 Ok thx. So you are saying that if you know the target location you make like B1, B2, M3 and so on and you also make 1 ATTACK point over the target. Just to see the QFE information and such? But you dont use the ATTACK Cartridge?
Jag är inte riktigt säker faktiskt, jag scrollar bara igenom dom jag kan tills jag hittar den jag letar efter, eftersom nummret kan variera beroende på om du har markmål och radarstationer att attackera i närheten.
You need to make sure that you've selected the correct cartridge on your kneeboard. Go to the data cartridge page, then use LeftCtrl+Shift+C and LeftCtrl+LeftAlt+C to cycle between the different available cartridges and select number 15. Then insert and load it.
@@arthipex8512 after I select type air craft and place my plane icon on maps (all) it freezes. I try clicking it to add way points ,bombs change weather ..it does nothing. all other planes work fine. it only works in create fast mission I can cold start it there but it sucks??
Thats strange, I see Arthipex beat me to the comment though. But you should just have to place the circle marker and then click on it to get the field underneath it to show up for editing.
@@chrisrobert1392 Ah, you're talking about the mission editor? To be honest, I never had that same issue. Perhaps you should try to run the DCS updater in repair mode.
Yeah there is definitely a chance of that happening haha. And we tried it on MP and only one player need to add the mark point and every Viggen on your side can use them. Which is great for coordination in a large flight.
What doesn't work? And where? I could try helping you. Also, the cartridges can be disabled in the editor. So they will not work in in some MP servers if the owner knows about the feature and have them turned off.
Great and useful video. Thanks alot ...i am so glad it finally got implemented. Cause i am just learning to master the RB 75 and this will make it a lot easyer .
Thank you, I'm glad you like and found it useful. The EP13 adjustments are a very welcome addition that makes it a lot easier locking on to targets.
If somebody doesn't get it from the video itself, you should do this: in Control Options use...Select Data Cartridge UP / Select Data Cartridge Down
Odgovori
You can also load a custom cartridge in flight if you forget to do it on the ground ..
Thanks for the vid. What do you need to type for your starting and landing airfields? I tried "LS" and "L1" but that didn't seem to work.
Hmm, I haven't actually tried adding Airfields, and I'm not sure if they would work either way. But you can add the codes for landing and takeoff airfields manually. Here are the available input codes: www.viggentools.se/assets/CK37_Input_Codes.png
@@Badjoe117 Thanks brother
how do you change the cartridge number in the
knee board?
LeftCtrl+Shift+C and LeftCtrl+LeftAlt+C will change the selected cartridge in the kneeboard.
@@Badjoe117 cheers
in Control Options use...Select Data Cartridge UP / Select Data Cartridge Down
@@BobbyBMS cheers :)
Thanks for this, I have to check it out myself.
I would recommend to lower your gamma setting though, everything would look a bit better :-)
Glad you liked it and I hope it helps. And I might fiddle with my gamma settings a bit. But it could also be video rendering and youtube's compression acting up as that happens sometimes. But I'll check how things look in game. Thanks for pointing it out!
Thanks again for a very useful video.
You're welcome, glad you found it useful! And thanks to you for watching!
Great video, thank you for that! Any idea if you can use map markers to set RB-15F waypoints (Bx6-9)?
Yes you can use the waypoints for the RB-15F, we tried it out in my squadron yesterday with the convoy attack mode and it worked out beautifully which is very nice.
Thanks a lot ... and to Heatblur too of course :) ... I will have to update my kneeboard procedures :D
You're welcome, I'm happy that it was useful to you!
Great video, thank you for that !
You're welcome, and I'm glad you found it useful!
Wow, thanks for this video!
You're welcome and I hope you found it useful!
Thanks for another great video!
And thank you for watching! Hope you found it useful!
This video is very helpful .. Thank you
You're welcome, and I'm glad to be of help. Good hunting!
Quick question does F10 Map Market work in MP?, I followed your video, went to the kneeboard and with the waypoints I make in the Map (B1-B5) there was nothing.
@@f900ex5 Hmm, strange, last time I tried it online it worked for me. But it could be that some servers have disabled the attack cartridges in the kneeboard as I think there is an option for it in the mission editor. Only advice I can give other than that is to double check your cartridges and mark points.
Do you know how you can change the groundcrew premade loadouts? If i make own loadouts in mission editor, i cant see them in the groundcrew menu?
Do you mean the mobile groundcrew? If so then unfortunately I don't know of any way to change them. As for the regular ground crew they should have a dropdown list on the right side of the rearm & refuel menu where all your saved mission loadouts should be.
@@Badjoe117 Yes i meant the mobile groundcrew. ok yea i have tried also but it seems that you cant change them..
@@Stoffe3D It is a shame you can't change it as some of the weapons like the Rb75B isn't on there. Though I guess you could possibly modify a file somewhere to make your own loadouts. But I'm not sure if that would work at all.
Very useful. Thanks.
You're welcome and I'm glad you found it useful!
Är det svenskar som jobbar med en utav favoritmodulerna i DCS? Där ser man!
Bra jobbat! Fortsätt så. Kul att se också att Hoggit höjjer er till skyarna! (Förlåt, det är en sjukdom)
Ja det verkar vara en del Svenskar som jobbar åt Heatblur/Leatherneck simulations. Och hittils så har dom gjort ett väldigt bra jobb med sina moduler tycker jag.
I cant see that data cartridge 12 when i want a ATTACK waypont. It doesnt show up? What can i do wrong?
Ah it needed to have al capital letters..Now it works.
@@Stoffe3D Glad you were able to sort it out, I have seen that one take a different data cartridge number as well. So looking through them all is also useful.
@@Badjoe117 Yea. im having difficulties to change cartridges in air also thou. Have you had any luck in swithing fram ATTACK to the regular F10 mark cartridges?
@@Stoffe3DI think it is best to pick what cartridge you want on the ground since the INS might get a bit confused otherwise. And I haven't tried that as I usually just use the ATTACK mark to find out QFE and all that information. But switching from F10 to ATTACK did mess up the ATTACK waypoints for me a few times.
@@Badjoe117 Ok thx. So you are saying that if you know the target location you make like B1, B2, M3 and so on and you also make 1 ATTACK point over the target. Just to see the QFE information and such? But you dont use the ATTACK Cartridge?
Hur väljer du data cartidge 23? jag kan bara välja mellan 0-12
Jag är inte riktigt säker faktiskt, jag scrollar bara igenom dom jag kan tills jag hittar den jag letar efter, eftersom nummret kan variera beroende på om du har markmål och radarstationer att attackera i närheten.
Jag tror jag klickade på "0" och så fungerade det!
just bought the viggen and it dont work on any on my maps ...cant edit it
What can't you edit? The orange circles on the F10 map?
You need to make sure that you've selected the correct cartridge on your kneeboard. Go to the data cartridge page, then use LeftCtrl+Shift+C and LeftCtrl+LeftAlt+C to cycle between the different available cartridges and select number 15. Then insert and load it.
@@arthipex8512 after I select type air craft and place my plane icon on maps (all) it freezes. I try clicking it to add way points ,bombs change weather ..it does nothing. all other planes work fine. it only works in create fast mission I can cold start it there but it sucks??
Thats strange, I see Arthipex beat me to the comment though. But you should just have to place the circle marker and then click on it to get the field underneath it to show up for editing.
@@chrisrobert1392 Ah, you're talking about the mission editor? To be honest, I never had that same issue. Perhaps you should try to run the DCS updater in repair mode.
Awesome feature but the multiplayer maps will be cluttered :D
Yeah there is definitely a chance of that happening haha. And we tried it on MP and only one player need to add the mark point and every Viggen on your side can use them. Which is great for coordination in a large flight.
does not work, what a joke
What doesn't work? And where? I could try helping you.
Also, the cartridges can be disabled in the editor. So they will not work in in some MP servers if the owner knows about the feature and have them turned off.
in Control Options use...Select Data Cartridge UP / Select Data Cartridge Down
Odgovori