Freightliner Cascadia DD13 DD15 ENGINE injectors cups replacement fuel in coolant coolant in fuel
HTML-код
- Опубликовано: 26 авг 2024
- Now accepting support and donation to my channel.
accepting: personal check, business check, money orders, gift cards, gifts, tools, shop articles, etc,..
send your checks or money orders payable to Francisco Amaya
send your support and donation to:
Francisco Amaya
P.O. box 672
Fontana CA, 92334
OR
PAYPAL
www.paypal.com...
(remember to add your address at PayPal donation)
__________________________________________________
Warning
Don't do this job if don't have the proper tools, if you fail to do the job correctly the engine could suffer catastrophic damage.
This process will work with all DD13 DD15 DD16 OM 471 OM 472 OM 473 engine from 2008 and up
If the fuel in coolant is visible in the coolant drain the coolant multiple times and clean the coolant system with any cleaning additive to prevent any damage to other components of the engine
for details about the fuel system bleeding check my video FREIGHTLINER CASCADIA DD15 ENGINE OIL CHANGE • Freightliner Cascadia ...
Freightliner Cascadia DD15 engine playlist
Freightliner videos: • Freightliner videos
__________________________________________________
Radio station: 96.7 FM Kcal rocks IE
#franciscoamaya #franciscoamayaDD15
Have no words to describe the good work you’re doing Francisco!! Incredible to have the heart to film while you’re working!!! Hope more people can appreciate what you’re doing with your time!! Just amazing
Amazing amount of detail. Thank you for your hard work.
If you plan to leave the injectors out of the engine for a long period of time or couple day ,make sure you cover them or leave them inside a diesel pan , if not you will have to replace an injector or more.
Also make sure to prime the fuel system when you are ready to start the engine after this repair or you can damage the fuel pump since fuel cools down the fuel pump ,it is bad to overcranck engine with fuel pump dry.
Just wanted to say thank you so much for getting back to me with your replies. Your help is very much appreciated and you are very generous to share your knowledge. I would definitely give you my business if only we were on the same coast!! Thanks again!!
Thanks
Thanks so much Francisco. This information really helps. You are doing a really big favor to all of us who want to learn how to troubleshoot your truck and don’t really know. Your videos make me feel like a mechanics. Thanks so much again. Keep making this videos.
Phenomenal video! You've saved me butt on so many occasions. I kind of know what to do but I do not know the step by step by step by step and just one little mess up can do a lot of damage!!!!!! I am going to donate to your cause!
God bless you and your family eternally Francisco your one of a kind
What an Amazing guy
I guess This Guy Born Different… He is so talented and Very Dedicated to His Job…
Such an Amazing work .. I’m learning lots of things from all his Videos…
Thank You for your hard work Francisco Amaya…
This guy is good and showing ease job if you have skills you can do your self or dealer will reap you off
Thanks, big bro you are a really good person God bless you
Best detailed video done the RIGHT way!
Replacing cups, now I know the part number for the tool. Good information
I just come across your video. I remove my hats out to you sir. Really great job. Where are you located? I really need a good mechanic that know what they’re doing.
Great job to the detail of your work I’m proud and honored to see people take that much pride in there job
On A DD15 how much would this job cost with replacing all injector as well with oem injectors
Each injector cost around $600 +/-
So you are expecting to spend $5000 +/- parts and labor, including the cups and seals
Very nicely done Francisco, detail work was easy to understand and performed.
What an awesome and very insightful video. I am currently experiencing this very issue with my tractor. You're video has given me the confidence to attack this task personally. I do have a few questions though. 1. What is the tool called to remove the injector cup o-ring? 2. What is the tool called to pry up remove the fuel injector? 2What did you use to clean the Injectors and injector cup holes? What type of lubricant did you use? I appreciate you sharing your expertise Fransisco. Thanks so much!
Great video. Now this is how you explain something.👌
Thank you for all your videos. Much appreciated.
Thank you
Very good video easy to understand all the details, thank you Francisco
Very very good video, my brother. Recently I met these problems : diesel in coolant, coolant in diesel ! They changed all 6 injector cups . But after fix that. I feel my truck no power now ,lose power than before . Also high fuel spend. Before is 8.0 MPG, now drop to 6.6 MPG. Do you know what happened? I spend $6000 to fix. Then my truck becomes weak.
When seals go bad on injector cups that's why I get antifreeze in fuel and get bog down and a back fire. I can tell it's in one cylinder because truck keeps running at 45 mph. Truck in shop and getting head gasket and all seals replace 😢
pristine taste in music.
We want to see how you replace the whole proses details, thank you for showed us the straps
I work at a fleet shop and we've done a couple of injector cups. We put something in dawn dish soap but I don't remember what it is the cups maybe? idk personally I haven't got to do any but you make it look easy idk what the other mechanics complain about maybe its the DD-13 in the day cabs since you dont have much space for 4 5 and 6
Primeramente darle Las grasias por sus videos mu bien explicados que hasta yo que soy aprendis de mecanico Los entiendo.siga asi de amigable y amable y le aseguro que tendra mucho exito en su vida y trabajo.y dios lo bendiga amigo..
ready for a road test great job thanks for sharing!
I have a 2010 Cascadia and fuel is in the coolant tank and also overflows out of the small drain hose
Replace the injectors cups
Hi Francisco I tried to do the same and little bit coolant got into combustion chamber and now engine not cranking what should I do?
Great vid, doing some on a clients truck. Take care !
Hey great video can u talk about the injection line. I have a freightliner cascadia automatic 2015 and there is small traces of oil buildup on injection lines should I be worried
Usually that is just the seals of the fuel lines
My truck is shaking and when I started it up and trouwing a lot white smoke. They checked injectors and they're working properly, no leaks, no coolant consumed, what to do think is the probleme. Yoy think is the injectors cups?
a word of warning, snug down the injector, loosen the bolt- then install the fuel jumper line, after the fuel jumper line is snug then torque the injector as required. if you don't do it this way you cannot turn the injector so the threads for the fuel line will start. when all that is tight then tighten the inj line rubber seal to the cam frame. you want everything centered up before you tighten anything or it will leak. if you see any engine oil in the injector harness connectors replace the harness. you do not want oil migrating down to the ecm- much more expensive to replace the ecm.
What will happen if I can't calibrate the injector? I dont have the computer?
Just put the injectors in the same place
But, it you install a new one. There will be not fiscal issues if you don't calibrate the MCM with the new injection. It can only affect on how smooth the engine runs or economy of the engine.
Thank you sir you help me save 2000 bucks. How do I tip you
send your support and donation to:
Francisco Amaya
P.O. box 672
Fontana CA, 92334
OR
PAYPAL
www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=6ZBD5RQTKC6X2
@@franciscoamayaYT I did something dumb I 4got to remove plastic tip off injector do you think I messed something up? Or do I just need to go back and remove the injector and correct the issue
Hello I got a question. I did a replace a number 3 injector, replace the injector harness, replace the fuel line, and the after I replace it put everything back together and I try to start a truck. It will crank couple times, ( weak crank and stop cranking and it won't let me start a truck, did pump the fuel try to start the truck through there starter and it won't start, I didn't programmed the new injector in the computer, do you think it will be the problem that the truck won't start or could be anything else, maybe the starter but before I did this job, the truck start fine. I don't know, if you have any idea, please let me know. Thank you
Muchas gracias por Tus videos para mi es muy importante por que aprendo mucho una Velma’s Gracias
Viejo cuando sale cambiar un injector ? Que recomiendas cambiar ya de a ver quitando la cabeza.? Me salió spn 654 fmi5 de código
Por favor alguien me puede decir,si es necesario drenar el cooland si no esta contaminado con aceite,,solo por cambiar los cap cup por mantenimiento,agradesco su repuesta
U are supposed to put the feed tubes in after u back off the injectors to make sure they are straight
Hi Francisco I have fuel in antifreeze replace everything like in your video filled up with new antifreeze still lots of diesel in system mine is 2014 is there anything else can cause that issue or just need to flush out the system cople times? Thanks
Buen Video Francisco, pregunta cuantas horas aproximadamente es Este Trabajo Gracias
Depende el que tan grande es la contamination.
Entre 4 horas hasta 8 horas
Randy Rhoads at 4:24. Oh yeah sweet video!!
What is part # for tool u used to pop out injector
after we did this were getting a random clicking noise and a high flow in the rail code going on and off. could it just be air in the system?
Some guy in irwindale charged me 800 dollars and he replaced them because of water in coolant and I never had a problem
Very nice explanation and video work
Francisco que tal yo tengo el mismo problema en mi camion es mucho el Diesel que esta en el tanker de agua y tambien en los tankes de diesel, tu cres que sea el mismo problema...muchas gracias
I have a 2015 DD15 I done everything on your video (great) to replace cups. I replaced everything on video but now I have code spn 651 fmi 5 . It shows injector 1 short circuit. I Did not have no code’s to begin with.. I replaced cups,cleaned injectors ( soaked incarb cleaner and clean with air) all the rings and brass seal. All filters. What to do next??? I’m pushing on time limit.. please help if you can.
There was a cranking issue once all work was completed. I got the same issues. How do I fix this or what could be the issue?
Hello Francisco I have the same problems, my question is what are the chances for the coolant to go in to the Diesel tank, because I have almost a full tank of fuel. Did you also drained the fuel from the tanks too. Plz let me know. Thank you sir.
Francisco,,,muy buen trabajo
Hey there.Im in South Africa my series 60 530 motor has jst started doig exactly this thing.Im worried abt wht could happen next?
Hello Francisco, thank you for great videos! I have freightliner cascadia 2016, manual transmission, I’m having problem with something I have never seen, when I’m driving my truck it has a whistle when I push on gas and shake with that whistle, especially when it’s cold it’s more, also heavy load makes more that whistle, have you ever fixed that kind of problem? May it be injector or turbo? Whistle like when the water boils in the kettle with a whistle. Also can you share of your shop location please? I really want to come to you in these days
Excellent. You are incredibly knowledgeable. How long did the job take? how long was it supposed to take? how much was the total invoice bill? thanks!!
Around 6 - 8 hours of labor, it will faster is there is not much fuel contamination in the coolant system.
It is going to cost around $1,500 - $2,500 depending on the parts you have to replace.
Damian Karras b
Wow..1500....to 2500 I have the same problem with my 2015 freightliner I took it to the dealer and they asked for $19000.00 ...
They are crazy
My truck is a 2015 with 490,000 miles on it I don’t have any problems but the dealer is telling me I should replace my injector cups at 500000 miles as preventative maintenance what is your opinion what mileage should you have them replaced at if there is no issue they said if I don’t have them replaced and something happens it could cause the one box to go bad
I have a question. 2015 cascadia dd15. I took the injector cups out but there were no o rings. Am I missing something here? Any help would be appreciated.
hey FA. i have a 2014 coranado 132 with 776k miles. my trucks using antifreeze. they pressure tested system it’s holding 1500 psi. they suspect this same issue. what are signs this is the issue ? and what’s the normal cost to have this fixed
Nuevo suscriptor, gracias por la buena explicacion paso a paso en el video
⭐⭐⭐⭐⭐
Que tal Francisco como detectas el problema del coolant en los injectores
Where did you get the injector cup oring remover tool? I'm thinking he took it from his utility belt. Because he is the Mexican Batman!. You my friend are amazing!!!
hi have a 2014 freightliner cascadia i have to prime my fuel every day
Do I have to listen to Cypress hill music to complete this job too???😁
Yes, you have to.
Metallica
Avenged sevenfold
Linkin Park
System of a down
Audio slave
Etc,.
This will help to perform a perfect job. 😁
Francisco Amaya you forgot AC/DC!
You are amazing sir. Quick question hope you don't mind me asking. I bought the tool from my local dealer looked just like the one you used but when I went to use it the cup got stuck on the end n wouldn't come off I couldn't use it. I don't know if maybe you moddified yours. If you have any insight about this I'd be much obliged
My tool is OEM not mod.
You have to rotate the top screw to release or hold it.
Amazing content bro ! Really appreciate all the help ! How did you diagnose this problem to the injector sleeves?
There is fuel in the coolant or coolant in the fuel
Excellent video
Hi, can bad injector and injector cups O-ring cause to blow white smoke on dd15 engine? Also loosing coolant when engine is cold/off and some coolant leaks under between engine and trans. =(
Hey Francisco I really like your videos. My name is Walter Garcia I have 2016 Freightliner Cascadia thanks to your great videos I'm doing all kind of maintenance on it. Brother I can't find where is located the coolant filter 😫 my question to you: it is possible for my truck not to have one
Bueno el video salu2 desde Edinburg Tx. Podrias hacer vídeos en español? Seria grandioso gracias
Si, ya estoy haciendo video en espanol
Dele click a este link para que vea los que tengo
Francisco Amaya en ESPAÑOL: ruclips.net/p/PL0kdrX_PXtdQ_XiJlkA2hGSDSKapPcbtR
Casi Todos los domingos voy a poner un video en español
I have the coolant going in fuel filters. I don't see the fuel in coolant reservoir. This is probably the same problem right.
Good video CHICO 👍
What tools/sockets do you use to to remove/torque the high pressure fuel lines especially going to the head?? Thank you
Great video!
Can you recommend a good fuel injector cleaner additive for the fuel tank?
I got one question if coolant gone in engine then any solution
Que tal Francisco, mira tengo un problema con un DD15 marca alta presión de aceite, y derrama aceite de motor por el contenedor de power steering, ya le cambie el PS filter y el crankcase filter, pero la presión sigue alta y sigue haciendo el by-pass del aceite de motor al Power Steering, talvez pienso que pudiera ser el compresor de aire, antes de pensar en la bomba de aceite, espero me pudieras ayudar, gracias
Very good video
great video! about how much in labor does this procedure cost? I am looking to buy a truck next month and through the research I have been doing says the cup seals go out in these engines at about 500k miles. The truck I am looking at has about 467k mikes on it. Also, do you take new clients?
I have replaced them on my junk dd15 yesterday. It's so fucken hard to put the o-ring in #6 . If you are a fat guy you need to find skinny helper :-)
Did you have to pressurize the fuel system before starting
yes, you do by using the primer pump or the external fuel filler pump
Francisco I have a Detroit dd15 and I noticed but there is diesel in the coolant reservoir do you have any suggestions
Can you reuse the injector cups and just change the oil rings?
Hello Nice to see video like this Thank you!
Just wanna ask how much cost amount for labor and parts?
Good work keep up
Hi Francisco. You have a really good information for us the truck drivers. I have a leak from the last 2 injector fuel lines and also my truck is not pulling that strong like before its not a big difference but I can feel it, its kind of struggling.What you think can be the cause of that happening and what can I do to fix that ? Thank you !
Replace the fuel lines and test the truck, let me know if any changes.
Hey what’s going on I have a 2011 freightliner cascadia I want to ask this question when I pull my parking breaks on my truck 2 min my motor start idle up to about 10 rpm when I push the parking break back in it stop so basically I can’t use my parking breaks because of that a friend of mind side it could be my camshaft what you think it could be
Thanks for the videos.
Please tell how to clean down inside the hole after cups are removed.
I’m going to do this job as a prevention measure since I’ll be in there doing a valve adjustment. I have 735,000 miles on a 2014 DD13. Do you think that’s a good thing?
Thank you for the advice.
Just use a rag to clean it.
Yes, it is good. You can prevent it.
can you please tell me what part number to remove the injectors
No tienes que quitar la cabeza en estos motores DD15 para El injector cup ? Ni molestar timing
No, no es necesario
Hey buddy how bad is to have a oil in the injector harness?
Great video.
What was the correct torque for the fuel lines coming off the common rail?
I know internationals are odd ball numbers, like 17 lbs/ft plus 60°
That equals like 35 psi. That same can be applied to DD engine. If you give to much torque they get stuck and it is ready hard to remove them.
Se tienen ke calibrar los injectores?
no llevan calibracion. solo los codigos de computadora
What is detroit dd 13 injector resistance ohm.my 5 ofthem no zero 1of 5.6 ohm.?
Great video! You may already know this but dealer always reccommends replacing injector lines when tampering.
Some times they recommend thing just to make money off of you.
How do I I know if I have coolant in my fuel?
Great video 💥
Same problem in my truck ,can u tell where is shop ,I can come.
How many miles do have to replace the injectors cup
Francisco cuando sacas los caps de los inyector el pistón tiene que estar en posición de explosión ?
No, puede estar en cualquier posicion
Good how much is cost with parts and labor
Excelente vídeo! Tengo una pregunta, tengo un DD13 y el problema es que el Coolant lo está tirando por el overflow, el coolant está en el nivel correcto ya cambie el cap y continúa, cual cree usted que es la causa,?
Se esta calentando?
No, la temperatura está normal,!
Es possible que tenga proplemas con El motor.
Cuando El motor este caliendo Corriedo revise si no see ven burbujas de Aire atraves de El coolant
Francisco, can I replace the fuel line seals and fuel lines without having to remove the valve cover? Should I remove the fuel rail to make it easier to replace the seals and new fuel lines?
Yes, you just remove the line.
Use a 19 mm wrench. And then you can easily remove the seal.
Insane in tha membrane 👍🏻🤣
Great work! You are very knowledgeable with a dd15. Can you please give me the address to your shop if you're in California? Thank you
I am in Fontana CA
Yes. I got your address from the internet. Thank you. See you soon.