That is exactly the right way to hand sharpen a drill very few people know how to do it and even less that can do it this is the only video I have ever seen on utube from a retired machinist
@@CheZfrmdaWestWiscexactly 🤣 I’m starting out in machining, and while I understand the “x” shape the tip of the bit needs to make, I definitely have not developed the skill very well at all
I learned to sharpen drills in the Air Force (RNZAF) in 1985. Just today, I had to sharpen a bit for a maintenance project I was working on. I told my son that I could probably remember how, but it may take me a few tries. This tutorial is bang on.
There's always "those people" who have to leave a comment on why they think you're doing whatever wrong, how long they've been a machinist, blah blah blah.. Personally, I see a mighty fine, well sharpened drill bit! Great job!
I actually worked this out myself using an angle grinder. This really does work great on pretty much any type of drill bit, even if you don't do it perfect, it's still better than a blunt bit,.
It will cut. If you want a hole the stated diameter of the bit then you need to get the sides even so the cutting forces are the same on each side and it doesn't wobble. A lot of the time you don't care that the hole is that accurate though so being a little off doesn't matter so long as it cuts well. A lot of people should be able to do better than the grind on those cheap Harbor Freight bits.
An angle grinder? Really. If it'd not in a vice then I fi d that hard to believe because the angles have to be very precise. Tried it many times on the bench grinder and it's not easy
@@tylerboss It's not that hard to do on an angle grider, on smaller drills it is even easier when you can sharpen them from behind. It won't make them perfect but if 5mm drill goes through 3mm stainless flat steel with ease free handing it's enough for me.
Nice split point. They are unnecessary if you have a pilot hole but are great to have. If your chips are uneven, then you'll need to take more off one side or the other. Great teaching👍
This is how my Dad taught me, as well as 4 years in machine shop in high school. Never had a twist drill work longer or harder than this sharpening technique.
I sublease to one of the best tool grinders in my area and I always pick his brain when I hand sharpen tools on a grinder and everything you did is spot on to what he says.
Checks out. Our shop works with fiberglass and we relieve all of our drills like this on the backside of the flute. We have a drill sharpener to set exact angles on our drills and reliefs but same bit pattern. 👌🏻 I know personally I have not hand set a relief like you tho! Great video!
That’s how I learned. I also had access to a precision split point drill sharpener which helped me understand the science of it all. That’s a great looking split point!
That's how i sharpened them 40 years ago. Pro tip: if you have a hole spec'd a few thou bigger than your drill bit, just sharpen it a teeny bit more on one side than the other. Acme-Gridley multi-spindle screw machines were excellent test beds! Brutal.
*GREAT VIDEO MAN, I SHARPEN ALL OF MY DRILL BITS THE SAME WAY ON A BENCH GRINDER. EVERYTIME I TRY TO TEACH SOMEONE NEW, HOW TO SHARPEN A DRILL BIT, IT CAN BE DIFFICULT EVEN IF THEY ARE WATCHING OVER MY SHOULDER. I THINK MY TEACHING DAYS ARE OVER, IM GOING TO SHOW THIS VIDEO TO ANYONE THATS WANTS TO KNOW HOW TO SHARPEN A DRILL BIT FROM NOW ON. YOU DID A FANTASTIC JOB FILMING AND EXPLAINING YOUR EXPERT SKILL HERE 👏 👍 GREAT JOB!!!*
Almost exactly how I was taught except I learned to rotate the drill slightly while rocking it back and forth. The game changer is the release angle that’s ground on the cross cutting edge, makes it cut like a dream 😍
Grinding bits on a disk sander is beautiful, so much better than bench grinders because you can actually see (or is easier to) the angle you’re grinding. On bench grinders I use the sides of the wheel (it’s all fresh and flat) to make my final angles
Beautiful job I know more men that ruin drill bits on a grinder than can get them to cut even wood again let alone properly and beautifully thin a web love to see people holding onto a lifelong skill
Nice! Getting the initial angle decent is challenging without any kind of jig from my experience. I like how you explained the different sectors/angles as it tough to visualize. Try an 0.03125" drill😉 i do those with a dremel and reading glasses. Cheers
Learned to do this as apprentice 3 decades ago! Journeyman gave me old drills to practice on and compare to new ones. It's a good skill to learn 👌 like riding a bike as they say 😊
Oh my gosh! This is similar to the way my tradesman(who was seriously good) taught me. Grind the cutting faces flat, go for an angle between 125-135 included, put some back clearance on for chip ejection and if sharpening larger bits thin the point slightly with the corner radius of the wheel. First time I've seen this online
Good video! In the shop, we use a darex drill sharpener (basically a commercial drill doctor). It's fast, makes a razor edge, and a perfect geometry every time 👌
99% of people will get a much sharper drill using a drill sharpener than trying to do it by hand on a grinder. I believe I have a drill doctor somewhere in my cellar, but I don't think I have ever used it yet.
Nice one , as a ex toolmaker the proof of a well hand ground drill is in the use of such a tool and so if it cuts equally and to size it is gold star time👍🏼
A little less pointy chisel edge would be great for tool life. Otherwise I do it exactly the same. Sharpening drills is an art especially if you work with stainless or brass there are some nice hacks to not make em bite as much but get nice chips of it✌🏻
Perfect. I've used a scale/square to eye that angle and length of edge for balance. And thinning the web I've used on parabolic Ex long on coolant Jacket. Good stuff !
Sharpen all my drills by hand - people always tell me that drill jigs are available - I can sharpen several when it takes so long to sharpen one with a jig - Split pointing a drill is excellent - symmetry is key - I place my left thumb in the flute of the drill them spin it 180o to get main angle and rake angle 👍👍👍👌👌👌👌
When I did my machinest trade one of the first tooling jobs we did was hours of learning how to sharpen drills for different applications 👍 this is good
This video IS spot on but don't forget the water !! You have to keep the material cool ! Always grind without gloves because if the material is hot to the touch, it's time to dip into the water
Get yourself a drill doctor and it does a nice job. I still sharpen some by hand when they won’t fit in the drill doctor but the drill doctor is the ticket.
Very good sharpening. Room for improvement tho. I notice that the outer edge is the first to go. So I chamfer outer ring a bit, so it shares the load a bit more when cutting.
Wow cool!! My ex-husband was a machinist you see all those little shavings. He used to bring those little shavings home in his clothes and they would get in my washing machine. I hated that ⚜️🐊🇺🇸🏡👋😎
Perfect. Then for brass and plastic, grind a flat on the flutes at the cutting edge to prevent the drill being sucked into the workpiece. Knowing how to effectively sharpen cutting tools by hand makes life in the shop a whole lot easier.
@@wholesomesunbro1 grind a small flat on the leading edge (cutting edge) of the flutes, nearly perpendicular to the workpiece to create a blunter edge.
@@wholesomesunbro1 no problem. The grind should be slightly larger than your feed/rev so the angled flute doesn't get a bite and therefore doesn't suck into the workpiece.
There are many ways to sharpen a drill bit offhand on a pedestal grinder. I like to start at the tool rest & ride the grinding wheel up then make it a split point like he showed
Very nice grinding, though i would still say you should slightly rotate the drill as you upsweep to give it rotational rake as well as flat rake. Matters less if you thin the point as well as you did, but I twist and uplift at the same time, to make it look like a new drill, then thin the point if the drill's going to be coring out. Drill point grinding is an art in itself. Guhring do flat grinding and a thinned point on their drills and they're some of the best i've used, but for hand grinding and considering the state of most workshop grinding wheels, i'd avoid point thinning and go for a twist and uplift on the wheel.
Very nice just learned how to do this for my apprentiship. Do you use any key or measuring device to look at the 118 angle or that the two sides are symmetric? I've been able to get amazing surfaces but sometimes drill 0.2mm to big due to inbalances
For the angle, you can use two hex nuts put together that will give you a 120° Angle. Bits vary in their angle from 118° to 135° depending on its intended use. Doesn’t have to be perfect to get a desired result.
If your holes are drilling oversize that would mean the tip of your drill is off center due to inconsistent grinding, you need a drill angle gauge to check centerline. .2mm is a looooot.
You don’t necessarily have to do that 2nd step of grinding a split-point, but you made it look effortless lol. I usually go crazy/lazy making split points, and give it a wickedly excessive relief angle… which probably isn’t consistent side to side lol. I only care about the main grind.
It almost looks like he did that BY HAND - by hand - BY HAND AND BY EYE - HE DID THAT BY HAND -±±that's what it looks like anyway... BY HAND - I say by hand BY HAND AND BY EYE 😮
Making a split point known as sharpening the secondary cutting edge is not necessary because you do not suppose to use a 9/16" drill bit without a pilot hole first. Everything over 1/4' requires a pilot hole with a 60% of the next diameter. Of course we don't do it because is time consuming and drill bits are cheap, but so it should be. The center of the drill bit doesn't cut because does not have the necessary speed. The center of the drill bit is squeezing and pushing the metal away under pure pressure we apply to the drill.
A Drill Doctor can makes this Procedure a whole [Hole? 😊] a Whole Lots EASIER, & MORE UNIFORM! Especially as to making a Split Point Sharpening! ThanXx for the Content and the Sharing!
I do this all the time with an angle grinder. Same concept but definitely not a result that good. When you have destroyed your but hitting concrete though a grinder sharpen is still 100% better than a blunt bit
It's good but not provide control when dealing with bigger diameter drills,so insted of grinding relief to edge grind it edge to relief. By this way (opposite grinding) you have control drill's relief angle and it ables you to see that where you are grinding and how much you grinding
Man it's been FOREVER since I've hand sharpened a drill. Seeing as I've been doing primarily Swiss work now I don't see anyone hand sharpening a tiny ass .014 drill.
Im clumsy and erratic, so I get my angle and hold my left hand against the plate, then it stays there until done. Muscle memory will get it back at the right angle after twisting or cooling.
That is exactly the right way to hand sharpen a drill very few people know how to do it and even less that can do it this is the only video I have ever seen on utube from a retired machinist
Wtf he turned an endmill into a drill.
@@JackHackadayThat is not originally an end mill lol. He just flat ground the end of the drill to have a clean start.
Someone made a flat bottom drill then fixed it .
Not that uncommon or difficult
I like how you made a distinction between knowing and doing
some of us know how to do a lot of stuff but can't actually do it well
@@CheZfrmdaWestWiscexactly 🤣 I’m starting out in machining, and while I understand the “x” shape the tip of the bit needs to make, I definitely have not developed the skill very well at all
This was exactly how our head machinist sharpened his bits.
He was a machinist for over 40 years. Retired a couple years back. I miss Mr. Colin.
My Boss is also called Colin lol also showed me how to sharpen a drill
I miss Steve my head mechanic at the old place I worked
That’s perfect! The drill swarf spirals speak to that fact!
I've been a machinist for 19 years and that looks like a great drill tip to me!
I learned to sharpen drills in the Air Force (RNZAF) in 1985. Just today, I had to sharpen a bit for a maintenance project I was working on. I told my son that I could probably remember how, but it may take me a few tries. This tutorial is bang on.
There's always "those people" who have to leave a comment on why they think you're doing whatever wrong, how long they've been a machinist, blah blah blah.. Personally, I see a mighty fine, well sharpened drill bit! Great job!
If it cuts nicely, it's sharpened correctly. People don't need to get so worked up about stuff.
I actually worked this out myself using an angle grinder. This really does work great on pretty much any type of drill bit, even if you don't do it perfect, it's still better than a blunt bit,.
It will cut. If you want a hole the stated diameter of the bit then you need to get the sides even so the cutting forces are the same on each side and it doesn't wobble.
A lot of the time you don't care that the hole is that accurate though so being a little off doesn't matter so long as it cuts well. A lot of people should be able to do better than the grind on those cheap Harbor Freight bits.
An angle grinder? Really. If it'd not in a vice then I fi d that hard to believe because the angles have to be very precise. Tried it many times on the bench grinder and it's not easy
@@tylerboss I put the grinder on the ground and stand on it so the disc is facing upwards then i can sharpen the drill bit one half at a time
@RetroScythe exactly this. We do this on site all the time. Sometimes an angle grinder is all you have
@@tylerboss It's not that hard to do on an angle grider, on smaller drills it is even easier when you can sharpen them from behind. It won't make them perfect but if 5mm drill goes through 3mm stainless flat steel with ease free handing it's enough for me.
If it produces the results you need, you did it right.
I done this thousands of times and i can say you done a very good job there ❤
Nice split point. They are unnecessary if you have a pilot hole but are great to have. If your chips are uneven, then you'll need to take more off one side or the other. Great teaching👍
A pilot hole isn't needed....indeed it would probably make you drill wear out more quickly...
This is how my Dad taught me, as well as 4 years in machine shop in high school. Never had a twist drill work longer or harder than this sharpening technique.
I sublease to one of the best tool grinders in my area and I always pick his brain when I hand sharpen tools on a grinder and everything you did is spot on to what he says.
I sharpened drills this way for years. I preferred hand grinding over the Black Diamond machine. Nice work!
Checks out. Our shop works with fiberglass and we relieve all of our drills like this on the backside of the flute. We have a drill sharpener to set exact angles on our drills and reliefs but same bit pattern. 👌🏻 I know personally I have not hand set a relief like you tho! Great video!
That’s how I learned. I also had access to a precision split point drill sharpener which helped me understand the science of it all. That’s a great looking split point!
I've been hand sharpening drills for over 50 years, great to see other people with these basic skills.
That's how i sharpened them 40 years ago. Pro tip: if you have a hole spec'd a few thou bigger than your drill bit, just sharpen it a teeny bit more on one side than the other.
Acme-Gridley multi-spindle screw machines were excellent test beds! Brutal.
*GREAT VIDEO MAN, I SHARPEN ALL OF MY DRILL BITS THE SAME WAY ON A BENCH GRINDER. EVERYTIME I TRY TO TEACH SOMEONE NEW, HOW TO SHARPEN A DRILL BIT, IT CAN BE DIFFICULT EVEN IF THEY ARE WATCHING OVER MY SHOULDER. I THINK MY TEACHING DAYS ARE OVER, IM GOING TO SHOW THIS VIDEO TO ANYONE THATS WANTS TO KNOW HOW TO SHARPEN A DRILL BIT FROM NOW ON. YOU DID A FANTASTIC JOB FILMING AND EXPLAINING YOUR EXPERT SKILL HERE 👏 👍 GREAT JOB!!!*
There are 2 kind of people those ones who have the ability to sharpen brill bits and those ones who just can't do it 😉
@@mr.slowhand3843 and those who write in bold all caps. 😂
@@declangraham1864 wrong @ my friend 😉
Why are u screaming?
@@Max-rw4fr *THAT WAS YOUR MOM!*
Almost exactly how I was taught except I learned to rotate the drill slightly while rocking it back and forth. The game changer is the release angle that’s ground on the cross cutting edge, makes it cut like a dream 😍
That's exactly how, I used to make a living sharpening drill bits. Good job.
Notice how his grinding wheel has been dressed. Great job on the drill bit.
And the grinder isn't dancing across the table...
Grinding bits on a disk sander is beautiful, so much better than bench grinders because you can actually see (or is easier to) the angle you’re grinding. On bench grinders I use the sides of the wheel (it’s all fresh and flat) to make my final angles
Beautiful job I know more men that ruin drill bits on a grinder than can get them to cut even wood again let alone properly and beautifully thin a web love to see people holding onto a lifelong skill
That's a good teaching method a lot of people don't know that👍👍
Nice! Getting the initial angle decent is challenging without any kind of jig from my experience. I like how you explained the different sectors/angles as it tough to visualize. Try an 0.03125" drill😉 i do those with a dremel and reading glasses. Cheers
Im here to say, thats the right way to sharpen a drill!
Good Job
I learned to sharpen drills from my pops. He’s pretty damn good at it. Gotta get the relief n main thing the center point.
Good stuff sir
Its amazing how many ppl will call themselves a machinist but caint sharpen a drill. I work with several
It's definitely a skill
Yes. ...ive done this too! I often ground ...chip breakers. Behind the cutting edges.....thanks!
One of my first jobs as an apprentice was to go through and sharpen all the shop drills and we did it the exact same way over 20 years ago. 🤘
Learned to do this as apprentice 3 decades ago! Journeyman gave me old drills to practice on and compare to new ones. It's a good skill to learn 👌 like riding a bike as they say 😊
Been doing this for 40 years works great!!
Been doing this for 41 years
Been doing it for 42 years.
Just buy a new drill bit / set
Not expensive
@@PaulG.369 I miss calculated it's 43 years, I was on a gap year with McDonald's
@@1971dave
Me too. Been in CNC for only 5. I'm not even 40 yet.
Oh my gosh! This is similar to the way my tradesman(who was seriously good) taught me.
Grind the cutting faces flat, go for an angle between 125-135 included, put some back clearance on for chip ejection and if sharpening larger bits thin the point slightly with the corner radius of the wheel. First time I've seen this online
Exactly how I learned it some fifty years ago.
First time I see it on RUclips.
Seen a lot of other crazy ways to sharpen drills.
Machinist here, and that absolutely is the correct way, very good grind 👍
Spot on! You can also use a ruler to measure the cutting edge length from the land to the chisel point to help get it in the centre.
Exactly how I was taught, been doing it for years with great results
Good video! In the shop, we use a darex drill sharpener (basically a commercial drill doctor). It's fast, makes a razor edge, and a perfect geometry every time 👌
99% of people will get a much sharper drill using a drill sharpener than trying to do it by hand on a grinder. I believe I have a drill doctor somewhere in my cellar, but I don't think I have ever used it yet.
Can I have it
@@SlowExpensive
When I find it, I want to try sharpening several dull drills. I will let you use it.
Brilliant tutorial 👍
I used to regrind longer hss drills slightly off centre for drilling aluminum bronze so it didn't grab at the bottom of the hole.
Nice one , as a ex toolmaker the proof of a well hand ground drill is in the use of such a tool and so if it cuts equally and to size it is gold star time👍🏼
A little less pointy chisel edge would be great for tool life. Otherwise I do it exactly the same. Sharpening drills is an art especially if you work with stainless or brass there are some nice hacks to not make em bite as much but get nice chips of it✌🏻
That was perfect. Drill Doctor is a good tool it allows you to split the tip as well.
Aber nur bis 13mm wie in dem Fall.Dann muss die METABO zum schleifen ran !😊😊😊
Wow, nice edges! As a former machinist… I will be coming to you for my sharpening hens forthcoming
I agree so many experts watching and talking but lack evidence , either way great illustration 👌
Dude i sharpen bits every day for the work i do any you did an amazing job.
Perfect. I've used a scale/square to eye that angle and length of edge for balance. And thinning the web I've used on parabolic Ex long on coolant Jacket.
Good stuff !
Sharpen all my drills by hand - people always tell me that drill jigs are available - I can sharpen several when it takes so long to sharpen one with a jig - Split pointing a drill is excellent - symmetry is key - I place my left thumb in the flute of the drill them spin it 180o to get main angle and rake angle 👍👍👍👌👌👌👌
Beautiful work!
Toolmaker's guide to drill sharpening. In the age of the internet you can look it up.
Once you get it down, it's pretty easy. Keep em cool
When I did my machinest trade one of the first tooling jobs we did was hours of learning how to sharpen drills for different applications 👍 this is good
This video IS spot on but don't forget the water !! You have to keep the material cool !
Always grind without gloves because if the material is hot to the touch, it's time to dip into the water
Perfect! I do exactly the same!
38yrs machinist.
To of the best machinist I ever worked with both taught me exactly this method.
I think it's a pretty good job well done 👍
I would just make it round instead of with this edge, but your work is looking pretty solid! Well done!
The chips will always tell you what’s going on. Great work!
Get yourself a drill doctor and it does a nice job. I still sharpen some by hand when they won’t fit in the drill doctor but the drill doctor is the ticket.
Yeah, I think you did a great job on the drill, but I’d like to see that auto chuck setup…that looks sick!
45 year manual guy here, if you can do this your drill is good to go!
That grinding wheel surface tells me this guy knows more than these keyboard warriors. Love the old Bridgeport btw
That's how I always do it. Works perfect every time.
Very good sharpening.
Room for improvement tho.
I notice that the outer edge is the first to go.
So I chamfer outer ring a bit, so it shares the load a bit more when cutting.
Wow cool!!
My ex-husband was a machinist you see all those little shavings. He used to bring those little shavings home in his clothes and they would get in my washing machine. I hated that
⚜️🐊🇺🇸🏡👋😎
So long as it cuts better than when you started you sharpened a drill bit correctly. Only suggestion is to make sure it stays cool.
Perfect. Then for brass and plastic, grind a flat on the flutes at the cutting edge to prevent the drill being sucked into the workpiece. Knowing how to effectively sharpen cutting tools by hand makes life in the shop a whole lot easier.
What do you mean “grind a flat on the flutes?” I have issues with brass pulling the bit in but haven’t been able to figure out how to stop it
@@wholesomesunbro1 grind a small flat on the leading edge (cutting edge) of the flutes, nearly perpendicular to the workpiece to create a blunter edge.
@@jeff-w thank you!! I’ll try that out
@@wholesomesunbro1 no problem. The grind should be slightly larger than your feed/rev so the angled flute doesn't get a bite and therefore doesn't suck into the workpiece.
It looks pretty good,is cutting like is supposed to ...congrats
I take pride in my drill sharpening skills
There are many ways to sharpen a drill bit offhand on a pedestal grinder. I like to start at the tool rest & ride the grinding wheel up then make it a split point like he showed
Very nice grinding, though i would still say you should slightly rotate the drill as you upsweep to give it rotational rake as well as flat rake. Matters less if you thin the point as well as you did, but I twist and uplift at the same time, to make it look like a new drill, then thin the point if the drill's going to be coring out. Drill point grinding is an art in itself. Guhring do flat grinding and a thinned point on their drills and they're some of the best i've used, but for hand grinding and considering the state of most workshop grinding wheels, i'd avoid point thinning and go for a twist and uplift on the wheel.
Very nice just learned how to do this for my apprentiship. Do you use any key or measuring device to look at the 118 angle or that the two sides are symmetric? I've been able to get amazing surfaces but sometimes drill 0.2mm to big due to inbalances
For the angle, you can use two hex nuts put together that will give you a 120° Angle. Bits vary in their angle from 118° to 135° depending on its intended use. Doesn’t have to be perfect to get a desired result.
After a while you can do it by eye
If your holes are drilling oversize that would mean the tip of your drill is off center due to inconsistent grinding, you need a drill angle gauge to check centerline. .2mm is a looooot.
This looks amazing, though I feel it would take a lot of time to get good at it
Those shaving look very tasty like my favorite pasta shape
Nice chips. Perfect sharpening
This is the way I learned how to sharpen drill bits 45 years ago.
You don’t necessarily have to do that 2nd step of grinding a split-point, but you made it look effortless lol. I usually go crazy/lazy making split points, and give it a wickedly excessive relief angle… which probably isn’t consistent side to side lol. I only care about the main grind.
Don't forget to dress the grinding wheel people.
It almost looks like he did that BY HAND
- by hand - BY HAND AND BY EYE
- HE DID THAT BY HAND
-±±that's what it looks like anyway...
BY HAND - I say by hand
BY HAND AND BY EYE 😮
There is no way you are going to convince me that that is the first time he has ever tried this -
😮
This is how i sharpen drill bits also. The back cut is not always necessary as the sharp corner of the stone eventually turns round.
Great grinding skills.
I went to machinist school in 1992. And this is exactly how they taught us
You roll the same chip out of both sides and you got her nailed!
Correct that's the best drilling procedure
Making a split point known as sharpening the secondary cutting edge is not necessary because you do not suppose to use a 9/16" drill bit without a pilot hole first. Everything over 1/4' requires a pilot hole with a 60% of the next diameter. Of course we don't do it because is time consuming and drill bits are cheap, but so it should be. The center of the drill bit doesn't cut because does not have the necessary speed. The center of the drill bit is squeezing and pushing the metal away under pure pressure we apply to the drill.
I had to make a drill angle gauge in high school and had wood drill bits to practice with.
A Drill Doctor can makes this Procedure a whole [Hole? 😊] a Whole Lots EASIER, & MORE UNIFORM! Especially as to making a Split Point Sharpening!
ThanXx for the Content and the Sharing!
Looks great
I do this all the time with an angle grinder.
Same concept but definitely not a result that good.
When you have destroyed your but hitting concrete though a grinder sharpen is still 100% better than a blunt bit
I would dip it in water so you dont overheat the metal
I liked it all but the Cim/cool coolant.
I prefer a water based coolant.
Looked good to this old retired iron worker.
How I've been doing it for 35 years, so easy for a quick touch up 🍻
It's good but not provide control when dealing with bigger diameter drills,so insted of grinding relief to edge grind it edge to relief. By this way (opposite grinding) you have control drill's relief angle and it ables you to see that where you are grinding and how much you grinding
Man it's been FOREVER since I've hand sharpened a drill. Seeing as I've been doing primarily Swiss work now I don't see anyone hand sharpening a tiny ass .014 drill.
Good job
Looks like this grinding stone needs to be pretty fresh and squared. Would that be correct ?And,can you use this method to dress old worn bits?
Im clumsy and erratic, so I get my angle and hold my left hand against the plate, then it stays there until done. Muscle memory will get it back at the right angle after twisting or cooling.
Well done!
thank god this applies to imperial and metric system
I can sharpen drill bits but not so perfect as you do. You're a machine.
Beautiful.