You missed the relief angle, the secondary angle, the cutting face is a compound angle of two intersecting angles that is determined by the material being cut. There are reference charts available for that info. on line.
I understand you! Because I did the same with my drill bit in the past.. These people haven't idea (neither the quality of Makita tools...) what is in the middle of the work your drill bit not cut... Greetings from south of Brasil 🤗
First of all, I thank you for your comments on my video, but this is my daily job, I've been working on this idea for years, I have many ideas but I don't have time to do them right now, I will work hard to come up with many useful ideas for everyone to see, I am from VIET NAM❤️
PLEASE, viewers of this video, DO NOT attempt this method. What a load of crap! This should be removed form youtube! This NOT the way to sharpen drill bit. This is the worst drill "sharpening" I've ever seen. There are so many things wrong in this video, including the DANGEROUS USE of cutting disks. The angles are wrong, at 8:27 you can see how bad the angles are!
Excellent video, thanks. I've sharpened hundreds of drill bits just by eyeing them and checking with a gauge. Your fixture is simple, time saving, and very effective, although I'm going to make one for my bench grinder instead of using the angle grinder. Yes, I am fortunate to have a bench grinder better suited to this task.
I hope you understand. Pathetically long and undesired commercials that I can skip gets the video watched. If I can't skip them, the video does not get watched.
Jesus, Just buy a small bench grinder as cheap as an angle grinder and will do the job safely and properly I can sharpen HSS drills in around 10 secs on a bench grinder. What utter rubbish, please don't anybody think this is a good idea or clever in any way this guy is clueless
This is an idea when going on a construction trip or in urgent times that will help you sharpen your drill bit right away and help those who do not have the funds so this is also called an idea, thank you for your interest. heart❤️
Sir, if you are a careful and meticulous person then you will be safe in this job, if you are a careless person then you definitely think this is not safe
Watch me turn a 1 minute task into a half a day long job with crap you might not even have in your garage. Geez. Tell me you don't use your brain without telling me you don't use your brain.
I'm not going to say its the best way to sharpen.. But don't be so down on the grinder disc use.. You can safely grind with a cut disc if you know what your doing.. I've got more hours welding then most people have driving.. Been doing it a long time
Amateur!! Drill sharping. May work For you on wood but not good enough for iron or steel, every thing that is important is off. Believe you me after 14 years in machine shop experience of sharping drills by hand I took a new drill out of the package and went strait to the grinding wheel. Factory drill shaping is inferior also.
Definitely a good idea, I can usually get em pretty good freehand but this quick idea for a guide is good. Most of the people making mean comments probably don't know how to use a pair of pliers!
ruclips.net/video/LoMGSnGss6E/видео.htmlsi=ixzRK7g0GpbPM1E0
Using the side of a cutting fiber disk as grinding? That's a Darwin award act.
I think you like it
You missed the relief angle, the secondary angle, the cutting face is a compound angle of two intersecting angles that is determined by the material being cut. There are reference charts available for that info. on line.
Thank you for giving me your opinion❤️👍🤝
Seems like "1 minute" is now 9 minutes long
❤️❤️❤️❤️
I understand you! Because I did the same with my drill bit in the past..
These people haven't idea (neither the quality of Makita tools...) what is in the middle of the work your drill bit not cut... Greetings from south of Brasil 🤗
First of all, I thank you for your comments on my video, but this is my daily job, I've been working on this idea for years, I have many ideas but I don't have time to do them right now, I will work hard to come up with many useful ideas for everyone to see, I am from VIET NAM❤️
PLEASE, viewers of this video, DO NOT attempt this method. What a load of crap! This should be removed form youtube! This NOT the way to sharpen drill bit. This is the worst drill "sharpening" I've ever seen. There are so many things wrong in this video, including the DANGEROUS USE of cutting disks. The angles are wrong, at 8:27 you can see how bad the angles are!
That’s got to be the most dangerous drill bit grinder I have ever seen ! !
If you are a responsible worker with a good mindset, you will definitely be safe❤️
You always dimple the metal before you drill it. That keeps the bit from wandering
Thank you for your comments, I will absorb them and motivate you to learn❤️👍
Nice video but all my bits that need sharpening are little ones and they are the real Bear to sharpen~!!!!
Thank you friend, I wish you good health❤️🤝
Buy a drill doctor 😂
Doctors only sell medicine🤣
I like the impldesigin.Nice video . THANKS
Thank you very much, my friend. I wish you good health❤️❤️🤝🤝
Just looked at your replies to the commentors. You're just a smartass.
Thank you for your comment, I just want to create content from what I know in my daily work❤️
This is not how it's done. Most grinders even come with a 60 degree slot for sharpening drillbits. Even if it doesn't. This is not how it's done.
There are many ways to sharpen drill bits, this method is for use in urgent cases, thank you for your interest in my video❤️
Can someone at Red Bull racing hire this guy as Max Verstappen’s chief engineer please?
Surely my cow will win first prize globally😂😀❤️
Dude, thats just dangerous. If you decide to do this, wear some face armor.
Thank you for your words of concern for me❤️
This video is how to hurt yourself and ruin your bits.
This is my daily job
Thanks. But if you costruct your aluminum angle oppositely the drill bit will not attempt to rise when being sharpened.
❤️👍❤️❤️
198K views good job.
I sincerely thank everyone very much❤️❤️❤️❤️🥰
you could ride bear arse to London on that drill i was in engineering for 42 years and was taught properly
Sorry if I could ride a bear then I would be a fairy😁
I hope your grinder is plugged out when you change the discs you will lose your fingers
You have to stay calm when working🤝
9 minutes later....
The hole is not round, so tberefore not sharpened properly.
🤝❤️❤️❤️
Excellent video, thanks. I've sharpened hundreds of drill bits just by eyeing them and checking with a gauge. Your fixture is simple, time saving, and very effective, although I'm going to make one for my bench grinder instead of using the angle grinder. Yes, I am fortunate to have a bench grinder better suited to this task.
🥰🥰❤️❤️
You can’t use 2 blades , why didn’t you use a thicker grinding wheel?
Since I didn't prepare a thick grinding wheel, I replaced it with these two blades😁
we all like i say less than 1 minute will make my son an l one thanks
Thanks man❤️
I hope you understand. Pathetically long and undesired commercials that I can skip gets the video watched. If I can't skip them, the video does not get watched.
Hope you understand for content creators like me, I thank you for your time. I sincerely appreciate it❤️
No chamfer on the edge? I guess this would work in a pinch but certainly not a long term solution.
That's your opinion, but everyone has their own opinion
Just go buy a drill Dr.
✌️
Very crafty. But risky. I hope you don't die when the grinding/cutting wheel shatters.
Thank you, but I work very carefully❤️❤️❤️❤️
Jesus, Just buy a small bench grinder as cheap as an angle grinder and will do the job safely and properly I can sharpen HSS drills in around 10 secs on a bench grinder. What utter rubbish, please don't anybody think this is a good idea or clever in any way this guy is clueless
This is an idea when going on a construction trip or in urgent times that will help you sharpen your drill bit right away and help those who do not have the funds so this is also called an idea, thank you for your interest. heart❤️
One of the worst sharpening jobs I have seen.
🥰🥰🥰❤️❤️❤️
I think this is also the fastest way to sharpen your nose
rubbish! there is no clearance angle. all youve done is grind the 120 deg lip angle . 30 yrs trade school teacher.
👌👌👌
Good grief! Not another drill sharpener video.
That's it, friend
Forced add before you can what you came to see should have choice if you dont care for the product
Thank you for your feedback, it makes me more motivated❤️
NICE.
Thank you so much for your compliment, I wish you good health❤️🤝
Note: This is Dangerous! to even attempt and quite bad for the drill...
Sir, if you are a careful and meticulous person then you will be safe in this job, if you are a careless person then you definitely think this is not safe
Watch me turn a 1 minute task into a half a day long job with crap you might not even have in your garage.
Geez. Tell me you don't use your brain without telling me you don't use your brain.
I'm not going to say its the best way to sharpen.. But don't be so down on the grinder disc use.. You can safely grind with a cut disc if you know what your doing.. I've got more hours welding then most people have driving.. Been doing it a long time
WTF wrong way… Noob 😂
This is how to do a bad job, dangerously.
Thank you for your feedback, but this is a daily task I have to do, and I'm familiar with it, so I have a very high level of awareness❤️❤️❤️
Why did I waste almost ten minutes watching this crap if it only takes 1 minutes to sharpen?
The time to sharpen your nose is only 1 minute ❤️
Wanted to watch the video, but turned it off due to too many bullcrap and long commercials.
I hope you understand❤️
Ý tưỡng này vô cùng hữu ích ❤❤❤ chúc mừng bạn
❤️
Amateur!! Drill sharping. May work For you on wood but not good enough for iron or steel, every thing that is important is off. Believe you me after 14 years in machine shop experience of sharping drills by hand I took a new drill out of the package and went strait to the grinding wheel. Factory drill shaping is inferior also.
🤝🤝
To much fannying around
❤️❤️❤️❤️❤️
WHAT A LOAD OF CRAP
Think I'll try that..
Thank you man❤️
This is stupid ! If you know how to do this you know NOT to do this !!
❤️❤️❤️❤️
Definitely a good idea, I can usually get em pretty good freehand but this quick idea for a guide is good. Most of the people making mean comments probably don't know how to use a pair of pliers!
Thank you brother for giving me more motivation. Thank you brother❤️
My cousin Donny tried this and lost a thumb
oh what a pity and condolences to your cousin, please be more careful at work, wish you always good luck
Total crap-
❤️❤️❤️❤️
Thankyou for this video, I will try this for sure, great idea, noticed your fingers are all rough, you must work hard
Thank you for motivating me, thank you for taking care of me, I work very hard so my fingers are rough❤️
Nice
Thanks man❤️
Khá là tiện lợi trong việc mài mũi khoan❤ cảm ơn bạn đã chia sẻ video hữu ích 🎉
❤️