Thanks for the info. I almost got my 125cc ToaToa done but the throttle cable was different and the vid didn't show how to put throttles back in place. I appreciate the time and effort your put into the for us to use.
That crap in the carburetors is what happens to fuel when it breaks down, most people don't know but gasoline is only good for a few weeks. You need to add a fuel stabilizer. I use stabile at lowes. That applies to any small engine. Lawn mower , atv, weed trimmer, etc , Use the additive every time you'll never have an issue with anything starting
Thanks for making this video, fixing mine and I believe it's the carbourator, but instead of attempting to clean it, I found one on Amazon for $12 USA (mine is smaller than yours, mine a 125cc) I mainly dident want to deal with drilling the screw thingies out
Great video, I bought the speed outs, took apart the carb, sooo gummed up, still won't start. I don't think I was able to clear 1 of the jets, so for $12 I bought a new carb, still won't start, unless I hit it with a shot of starter fluid. After sitting for days, I tried it again and it ran for 10 sec, no starter fluid. Says to me that the carb bowl is not filling unless it sits for a while? Help..a little boy is counting on me
Craig Needelman hi Craig if you're getting gas , in other words stick your gas line in a cup and throttle the thing and see if you're getting gas going to the carb if you are then it is the carb even though brand-new there's something wrong with it so I would take it apart and make sure you clean out that one I showed you with the really fine hole okay I showed in the video using a wire from a wire brush or a really small twist tie you got to get that thing cleaned out brother so if you are getting gas then it is the carb if you're not getting gas then fix that problem but if you are fix the carb
I let you know if I can find any information to help you, as I type this I am fixing mine a 125cc and I bought a new carb for $12 also. Good luck with your quad, back to working on mine
I found that it's usually the jets and the float needle stuck because of ethanol in gas happens when you leave it sitting for a while. And btw these carbs are only $15 on eBay.
Justin Riner it will fit this exact atv? I have the same one as the video and and I’m having trouble getting it started. I don’t want to do a carb rebuild or clean cuz I’m not good with that stuff so if the one from the link fits I’ll give it a try
Parents own a big ranch and a buddy of there’s gave them a 2016 tao 150cc that don’t run and said if yall can fix it, keep it. Imma try my best to get her running
hey I have a question, I just got a new motor and carb put on and I went to start it and the ignition switch is broke so I had to bridge the solenoid and it cranks but it doesent start. I am getting fuel to the new carb but not sure what is going on, it sometimes acts like it wants to but its juts not, more so just cranking then anything. I was thinking maybe the CDI but if you have any tips or anything I need to check before that would be great!
@@Jonehughes yes I am positive. I pulled out the line going from the filter to the carb and left the flow in the on position and it was flowing well so I was like alright, uhhh whats next ? well I then tried to adjust the a/f valve because it was tightend all the way so I did it about two and a half turns and then nothing again. but yea jumping the solenoid gets it to crank, I could careless about the switch I just want it to run since its all brand new. The only thing I could really think of thats really small is the gas. its been in there for some weeks but also its not alot in there but its also not empty. so I have been stuck for the past hour. I want to take it apart and clean it but its new haha it shouldnt need to be cleaned. maybe a faulty carb idk
No A faulty carb wouldn't do that It would be sputtering in all kinds of crap It wouldn't simply not start while cranking Try the can of starting fluid Don't use much because you can ruin the Pistons But if it cranks as soon as you apply it You know that the gas is not getting to the carburetor It could be getting to the hose Like you said But past the hose the elbow that feeds the carb Could have a bug in it Who knows It's definitely fluid problem Try the starting fluid
Need good advice 2013 Tao 110 , do I have lock the hand break to start it, it does nothing with push button, can jump at solenoid and it cranks, getting fuel, not sure about fire cant see from the other side by myself. I was told the foot break pedal had to be mashed down, it does not have remote start, help !
i was recently riding mine and it choked out ''green horned'' while reversing is yard still trying to get use to the throttle feed for this type of atv well after returning to neutral it wouldnt start no even a sound checked battries and gas feed and then checked the clutch cable and all other possibilities and still nothing not even a sound..... when i press the start button it does nothing would you have any ideas.
I have a brand new Tao Tao 110 coolster that we got last fall. it's only been run maybe 5 minutes and only around our yard before I put it away for the winter. Now it won't start. Do you really think the carb is dirty from just that short run? My other questions is, I tried to start it and keep hitting the throttle for a while and choking it and then taking the choke off and it wouldn't start. I pulled the plug and it's completely dry. I did this two or three more times and the plug never was wet. Any idea why I'm not getting any gas? I just drained the tank and put fresh gas in it and made sure the petcock was open. Thanks for your time and assistance.
Yeah John It is the carb, just like mine, exact same symptoms, spray some starter fluid into the spark plug hole and fire it up, it will probably start if you bypass the carb
390FE no they only have about 5 miles on them I bought them brand new put them together and they're both exactly the same I have no idea it must be just gas that dried-up
I put in a new Carb and it started right up. Drove it to the corn and it bogged down and wont start now. The carb started back fire now after multiple attempts to start.
Greg Guerra I think some of the carbs come with that junk in them I think you need to rebuild it like I showed you on the video the Jets are probably plugged
Hey I'm new yo these Chinese toys. At 0.32 in ur video shows the starter then a silver plate that has a gear with a rod with a pin on it that is needed to turn the motor over . What is the tech term of that rod , bc every time I try to find it on eBay I can't find it. Any help would be appreciated bc I'm not used to these off brands with extras on them...... haha..
I have 3, 2 new 150cc and a 250. My issue is one of the 150cc will start but once i put it in forward and throttle it it keeps cutting out?? i called powersprts in TX and they are sending a carb. what do you do to avoid the carb and gas issues?? can i lave any gas in the card after use?
that "crap" in the carb is the result of ethanol in our fuel. Go to lowes or HD and look in the outdoor power equipment section and look for a fuel stabilizer, add it to fresh fuel , use that every time you buy gas for anything small engine like atv lawn mower weed eater etc and you'll never have a problem with it starting it will keep your fuel good for 6 months to a year
Family fun with four munchkins!!!!! Take the filter off carb and press throttle and see how far the little cylinder that the throttle needle goes onto moves. Maybe adjust throttle screw on handle bar outwards and see if it moves upward more
I have a TaoTao 110 the problem with it is that it will turn on and stay on if I hold onto the throttle but will turn off if I don't hold on to the throttle once I let go of the throttle the engine shuts off how do I fix this?
Sonnie Her it is the large jet in the carburetor if you soon as you let go it dies it means it is clogged it needs to be cleaned follow the instructions on the video it'll work perfect
Sonnie Her if that doesn't work try adjusting the carb with the screw on side tightening inward will make rpms higher and keep it running most likely, quick fix to keep riding without taking carb off sometimes works.
Sonnie Her it could still be one of the Jets need to be cleaned out it only takes a few minutes go ahead and just do that and if it still doesn't work you need to adjust the carburetor but I would say is clean it out first
You shouldn't spray carb cleaner directly into the carburetor intake the engine can blow up on you. Not a good idea take the carburetor apart then spray and clean
Daniel Noun hi Daniel I would spend the half-hour taking apart your carburetor and putting it back together again cleaning it all up with some carburetor cleaner and you'll be good to go it surely can't hurt
So i have a tao tao and look it works but when i start up the lights and everything worked but to turn mine on you press the power button amd the foot brake it sounds like its starting but it dosent please help me
I have a 250cc taotao the exact same motor in this video, my starter is spinning the gears but not turning the motor over....🤬 what is going on? What should i check?
@@Jonehughes i don't know notting about these atvi'm a dummy when it comes to these bike when i got the bike from a friend its not mind the carb. on it seem to be two big for it i need to know step by step what to do i'm sorry about this i fix lawn mower weed eater not these bike atv i need alot of help i know i;m a dum dum please help
I have a 125cc I forgot to cover it overnight and it was raining for a bit. Itll have problems starting but after a couple of tries itll start but when I press the gas itll shut off. Help?
Arnold R. Hey Arnold it doesn't sound like the rain did anything it just happens to be a fluke when it happened anyway it sounds like you need to rebuild your carburetor it certainly wouldn't hurt so give that a shot brother clean all the Jets Out get it all cleaned up ready to go and fire that mother up let us know how it went
Arnold R. Yeah you definitely have a short somewhere you'll simply have to investigate one thing at a time the water could have hit a exposed electrical circuit and that caused it to ground out you may want to move around all your wires in the loom everywhere you have just kind of give them all a little movement give him a little push and pull here in there you see if you can correct the grounding especially where you can see wiring touching the frame
A Peker what do you mean the carburetor is clean did you take it all apart and clean out all the Jets and put in fresh gas because if you did and you have spark it will start
but okay i hope you understand this ......... okay good morning im the guy from youtube well this is the story i buy this atv tao tao from china my son one day was using after that day the atv not show any power i turn the switch on but is dead no show any light so i put the battery to charge because i think was the battery and is fully charged input back to atv and still the same i change the fuse and still the same i dont know what is going on before when we try turn on show us like a blue light ok the little board like the switch is on but right now is completely dead i hope you can help me
Bought two of these used off Craigslist. They are Garbage money pits. Constantly having issues. We've replaced so many things to keep them running. Carbs, control boxes, voltage reg, coils, magneto, etc etc. They are constantly needing repairs. Frames are garbage too. Broken and welded frames on these. They are cheap yes, parts cheap yes but if you put a dollar value on your time, effort and broken down time they aren't worth buying for a dollar. Invest in a real quad and avoid these garbage wheelers.
1- If you all haven't seen a documentary called... It's worse than you think... Bye revelations of Jesus Christ ministries... I suggest you do... All praise and glory to the most high Jesus Christ.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Thanks dude. Good video, got her going again.
Thanks for the info. I almost got my 125cc ToaToa done but the throttle cable was different and the vid didn't show how to put throttles back in place.
I appreciate the time and effort your put into the for us to use.
That crap in the carburetors is what happens to fuel when it breaks down, most people don't know but gasoline is only good for a few weeks. You need to add a fuel stabilizer. I use stabile at lowes. That applies to any small engine. Lawn mower , atv, weed trimmer, etc , Use the additive every time you'll never have an issue with anything starting
I love my You Tube could not live without it !
Thanks for making this video, fixing mine and I believe it's the carbourator, but instead of attempting to clean it, I found one on Amazon for $12 USA (mine is smaller than yours, mine a 125cc) I mainly dident want to deal with drilling the screw thingies out
Great video, I bought the speed outs, took apart the carb, sooo gummed up, still won't start. I don't think I was able to clear 1 of the jets, so for $12 I bought a new carb, still won't start, unless I hit it with a shot of starter fluid. After sitting for days, I tried it again and it ran for 10 sec, no starter fluid. Says to me that the carb bowl is not filling unless it sits for a while? Help..a little boy is counting on me
Craig Needelman hi Craig if you're getting gas ,
in other words stick your gas line in a cup and throttle the thing and see if you're getting gas going to the carb if you are then it is the carb even though brand-new there's something wrong with it so I would take it apart and make sure you clean out that one I showed you with the really fine hole okay
I showed in the video using a wire from a wire brush or a really small twist tie you got to get that thing cleaned out brother so if you are getting gas then it is the carb if you're not getting gas then fix that problem but if you are
fix the carb
I let you know if I can find any information to help you, as I type this I am fixing mine a 125cc and I bought a new carb for $12 also. Good luck with your quad, back to working on mine
Mine turns over but it wont fire up could it still be the carb
Great job and thank you! I'm gonna attempt to get my son's running this weekend!
Did u get it running
Excellent! Hopefully this will be a fix for mine not starting
Thanks, got my son's running and idles perfect. Don't think its idled well since we bought it
John,
I just acquired a similar quad
What year & cc is this unit
2017
250
I found that it's usually the jets and the float needle stuck because of ethanol in gas happens when you leave it sitting for a while. And btw these carbs are only $15 on eBay.
Justin Riner how did you look up the carb on eBay?
ig243 www.ebay.com/i/391888889082?chn=ps&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F391888889082%25253Fchn%25253Dps%2526itemid%253D391888889082%2526targetid%253D400468652596%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9011366%2526poi%253D%2526campaignid%253D1028603671%2526adgroupid%253D48124585622%2526rlsatarget%253Dpla-400468652596%2526abcId%253D1130046%2526merchantid%253D113465031%2526gclid%253DEAIaIQobChMIvOihjLmk3AIVUTuBCh3hfwwEEAQYBSABEgI-F_D_BwE%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1600353326938%2526rvr_ts%253Da4c123381640a884302068cdfff472ef
ig243 just click that and it'll pull up exactly what you need
ig243 just to let you know though it could take a month or so to get it if it ships from china.
Justin Riner it will fit this exact atv? I have the same one as the video and and I’m having trouble getting it started. I don’t want to do a carb rebuild or clean cuz I’m not good with that stuff so if the one from the link fits I’ll give it a try
Parents own a big ranch and a buddy of there’s gave them a 2016 tao 150cc that don’t run and said if yall can fix it, keep it. Imma try my best to get her running
where can I purchase an electric choke carburetor for freelander 300 4x4 I cant find them anywhere! Should I just trash the thing 😡
Hi. Can you explain how to fix the throttle cable to keep it from reving high when starting as mentioned @ 2:15?
the cable is the slide adjustment
hey I have a question, I just got a new motor and carb put on and I went to start it and the ignition switch is broke so I had to bridge the solenoid and it cranks but it doesent start. I am getting fuel to the new carb but not sure what is going on, it sometimes acts like it wants to but its juts not, more so just cranking then anything. I was thinking maybe the CDI but if you have any tips or anything I need to check before that would be great!
Hopefully someone will see your question and respond who has better knowledge because I have no clue It could be anything you were thinking
But you are sure that there is gas going to the carburetor?
And you can't use much cuz you'll ruin the engine but you can use a little bit of starting fluid and see if that will do it
@@Jonehughes yes I am positive. I pulled out the line going from the filter to the carb and left the flow in the on position and it was flowing well so I was like alright, uhhh whats next ? well I then tried to adjust the a/f valve because it was tightend all the way so I did it about two and a half turns and then nothing again. but yea jumping the solenoid gets it to crank, I could careless about the switch I just want it to run since its all brand new. The only thing I could really think of thats really small is the gas. its been in there for some weeks but also its not alot in there but its also not empty. so I have been stuck for the past hour. I want to take it apart and clean it but its new haha it shouldnt need to be cleaned. maybe a faulty carb idk
No
A faulty carb wouldn't do that
It would be sputtering in all kinds of crap
It wouldn't simply not start while cranking
Try the can of starting fluid
Don't use much because you can ruin the Pistons
But if it cranks as soon as you apply it
You know that the gas is not getting to the carburetor
It could be getting to the hose
Like you said
But past the hose the elbow that feeds the carb
Could have a bug in it
Who knows
It's definitely fluid problem
Try the starting fluid
Sometimes you need gas even though it already has some
When did Norm Macdonald get a channel
Need good advice 2013 Tao 110 , do I have lock the hand break to start it, it does nothing with push button, can jump at solenoid and it cranks, getting fuel, not sure about fire cant see from the other side by myself. I was told the foot break pedal had to be mashed down, it does not have remote start, help !
i was recently riding mine and it choked out ''green horned'' while reversing is yard still trying to get use to the throttle feed for this type of atv well after returning to neutral it wouldnt start no even a sound checked battries and gas feed and then checked the clutch cable and all other possibilities and still nothing not even a sound..... when i press the start button it does nothing would you have any ideas.
I have a brand new Tao Tao 110 coolster that we got last fall. it's only been run maybe 5 minutes and only around our yard before I put it away for the winter. Now it won't start. Do you really think the carb is dirty from just that short run? My other questions is, I tried to start it and keep hitting the throttle for a while and choking it and then taking the choke off and it wouldn't start. I pulled the plug and it's completely dry. I did this two or three more times and the plug never was wet. Any idea why I'm not getting any gas? I just drained the tank and put fresh gas in it and made sure the petcock was open. Thanks for your time and assistance.
Yeah John
It is the carb, just like mine, exact same symptoms, spray some starter fluid into the spark plug hole and fire it up, it will probably start if you bypass the carb
Maybe that crap is coming through the air cleaner somehow or maybe its from the ethanol in the gas or do you use non ethanol?
390FE no they only have about 5 miles on them I bought them brand new put them together and they're both exactly the same I have no idea it must be just gas that dried-up
How do you fix transmission?
I put in a new Carb and it started right up. Drove it to the corn and it bogged down and wont start now. The carb started back fire now after multiple attempts to start.
Greg Guerra I think some of the carbs come with that junk in them I think you need to rebuild it like I showed you on the video the Jets are probably plugged
will try that out.
Hey I'm new yo these Chinese toys. At 0.32 in ur video shows the starter then a silver plate that has a gear with a rod with a pin on it that is needed to turn the motor over . What is the tech term of that rod , bc every time I try to find it on eBay I can't find it. Any help would be appreciated bc I'm not used to these off brands with extras on them...... haha..
I had a crash with my Tao Tao four wheeler and now it just makes sound when I try too turn it on
Mine starts but won’t stay on, it’s getting gas. I think it isn’t getting enough spark
Same with mine
have you guys tried tighten the idle screw?
I have 3, 2 new 150cc and a 250. My issue is one of the 150cc will start but once i put it in forward and throttle it it keeps cutting out?? i called powersprts in TX and they are sending a carb. what do you do to avoid the carb and gas issues?? can i lave any gas in the card after use?
that "crap" in the carb is the result of ethanol in our fuel. Go to lowes or HD and look in the outdoor power equipment section and look for a fuel stabilizer, add it to fresh fuel , use that every time you buy gas for anything small engine like atv lawn mower weed eater etc and you'll never have a problem with it starting it will keep your fuel good for 6 months to a year
I have the same Tao Tao 250 and its making a whining noise and won't start any suggestions what it might be
DeAndre Denmark kind of sounds like starter to me.
My quad starts and idles good but doesnt have and throttle
Family fun with four munchkins!!!!! Take the filter off carb and press throttle and see how far the little cylinder that the throttle needle goes onto moves. Maybe adjust throttle screw on handle bar outwards and see if it moves upward more
“It’s super easy”
I have a TaoTao 110 the problem with it is that it will turn on and stay on if I hold onto the throttle but will turn off if I don't hold on to the throttle once I let go of the throttle the engine shuts off how do I fix this?
Sonnie Her it is the large jet in the carburetor if you soon as you let go it dies it means it is clogged it needs to be cleaned follow the instructions on the video it'll work perfect
Jon Hughes thank you I will try it
Sonnie Her if that doesn't work try adjusting the carb with the screw on side tightening inward will make rpms higher and keep it running most likely, quick fix to keep riding without taking carb off sometimes works.
Sonnie Her it could still be one of the Jets need to be cleaned out it only takes a few minutes go ahead and just do that and if it still doesn't work you need to adjust the carburetor but I would say is clean it out first
You shouldn't spray carb cleaner directly into the carburetor intake the engine can blow up on you. Not a good idea take the carburetor apart then spray and clean
Anthon R
Cynthia Sparks a thumbs up thank you. Sarterflued can help still scary. increase the rpms a bit earth air or gas
Any one knows how can i get all the wire harnesses for this bike?
Hey I have an at coolster it will start and then die and keep on doing that how do I fix it?
Daniel Noun hi Daniel I would spend the half-hour taking apart your carburetor and putting it back together again cleaning it all up with some carburetor cleaner and you'll be good to go it surely can't hurt
Kk I got it thx
I also messed up the PIN I lowered the RPMs and the engine did not want to quit I choked it completely then it quit. I got really scared
So i have a tao tao and look it works but when i start up the lights and everything worked but to turn mine on you press the power button amd the foot brake it sounds like its starting but it dosent please help me
99.9 percent of all your problems are carburetor related.... Rebuild it only takes an hour now you'll be good to go
I have a 250cc taotao the exact same motor in this video, my starter is spinning the gears but not turning the motor over....🤬 what is going on? What should i check?
Same problem man ...
Same issue man you figure it out ?
Mine doesn’t start because it isn’t getting gas, so we are fixing the carb! Hopefully it works... I real pray and hope it does.
Did it work?
whats the name of carb.
www.amazon.com/dp/B07F9XX7TN/ref=cm_sw_r_cp_apa_glt_fabc_0NT79MY3PQASJ1SYVZ51?_encoding=UTF8&psc=1
@@Jonehughes how do i get hold of you
@@Jonehughes jon i need to talk to you
@@Jonehughes i don't know notting about these atvi'm a dummy when it comes to these bike when i got the bike from a friend its not mind the carb. on it seem to be two big for it i need to know step by step what to do i'm sorry about this i fix lawn mower weed eater not these bike atv i need alot of help i know i;m a dum dum please help
pz27 carb. is what i need right
My tao tao starts but it wont stay on i adjusted the carb and cleaned it but it still doesnt stay on
Alan Leija your carb have screws on bottom of bowl?
I have a 125cc I forgot to cover it overnight and it was raining for a bit. Itll have problems starting but after a couple of tries itll start but when I press the gas itll shut off. Help?
Arnold R. Hey Arnold it doesn't sound like the rain did anything it just happens to be a fluke when it happened anyway it sounds like you need to rebuild your carburetor it certainly wouldn't hurt so give that a shot brother clean all the Jets Out get it all cleaned up ready to go and fire that mother up let us know how it went
Jon Hughes alright thanks.
Jon Hughes when I press the switch to start it the lights flicker and it makes a wierd noise. Maybe it's the battery?
Jon Hughes it's sort of like a buzzing sound
Arnold R. Yeah you definitely have a short somewhere you'll simply have to investigate one thing at a time the water could have hit a exposed electrical circuit and that caused it to ground out you may want to move around all your wires in the loom everywhere you have just kind of give them all a little movement give him a little push and pull here in there you see if you can correct the grounding especially where you can see wiring touching the frame
Hi
Have a125 Cc taotao and it won't start
Has spark
Carb is clean and clear
What else should I check ?
A Peker what do you mean the carburetor is clean did you take it all apart and clean out all the Jets and put in fresh gas because if you did and you have spark it will start
What about compression. Check that
but okay i hope you understand this ......... okay good morning im the guy from youtube well this is the story i buy this atv tao tao from china my son one day was using after that day the atv not show any power i turn the switch on but is dead no show any light so i put the battery to charge because i think was the battery and is fully charged input back to atv and still the same i change the fuse and still the same i dont know what is going on before when we try turn on show us like a blue light ok the little board like the switch is on but right now is completely dead i hope you can help me
David Gonzalez key switch maybe sometimes it'll short wiggle it a little
Mine wont start can some one help me
you should check on some one wants cantact to you
I have the same four wheeler but mine has no gas on the throttle and wont even make a clicking noise
Sounds like a battery issue, try a new one, let us know if that works
great video, great info, but the focus is just soo bad
I have no fire on my sons tao tao,can anyone help,please?
www.nadaguides.com/Motorcycles/shopping-guides/motorcycle-won't-start-but-battery-is-good
Super easy? Sure, if I was a mechanic.
I am not a mechanic and it only took me an hour...
You can do this
How is this easy?
It literally does not get any easier
You can always go to Amazon and buy that carburetor for 50 bucks
But if you want to save fifty bucks
A few minutes of your time and it's done
Bought two of these used off Craigslist. They are Garbage money pits. Constantly having issues. We've replaced so many things to keep them running. Carbs, control boxes, voltage reg, coils, magneto, etc etc. They are constantly needing repairs. Frames are garbage too. Broken and welded frames on these. They are cheap yes, parts cheap yes but if you put a dollar value on your time, effort and broken down time they aren't worth buying for a dollar. Invest in a real quad and avoid these garbage wheelers.
i did sen you a messages can you check your facebook
David Gonzalez never saw it brother just post a message right here I guess
1- If you all haven't seen a documentary called... It's worse than you think... Bye revelations of Jesus Christ ministries... I suggest you do... All praise and glory to the most high Jesus Christ.