SSR 125cc Dirt Bike Restoration! Complete rebuild!
HTML-код
- Опубликовано: 21 сен 2019
- On this Episode of Praska Boy's Garage I completely take apart every single nut and bolt of this SSR 125cc dirt bike and restore it! What a challenge it was but in the end I wouldn't have it any other way. This is my favorite project I've done so far! Thank you for watching, and like always, I will see you on the next one!
Thank you to VMC Chinese Parts! Truly an amazing company that is my go to for parts when working on my projects! Please check their website first when ordering parts for your next project!!!
www.vmcchineseparts.com
Thank you to Dan Fitzpatrick and his shop Rim Right by D & D Designs! He and the Rim Right team did an outstanding job with the power coating for this project!!! Here is the link to their website and RUclips Channel:
www.rimrightiowa.com
/ @rightnowpowdercoating
Parts and Cost Breakdown:
$56.95 - Pirelli Scorpion MX Tire 80/100-12
www.vmcchineseparts.com/produ...
$43.95 - Rim Wheel Rear - 12" x 1.85" - 32 Spoke
www.vmcchineseparts.com/produ...
$42.00 - Rim Wheel 14" x 1.4" - 32 Spokes
www.vmcchineseparts.com/produ...
$28.95 - Duro Off Road Tire 60/100-14
www.vmcchineseparts.com/produ...
$28.00 - Front Disc Brake Caliper
www.vmcchineseparts.com/produ...
$22.95 - Mini Dirk Bike Body Fender - 7 Piece
www.vmcchineseparts.com/produ...
$22.00 - Brake Caliper Rear Disc
www.vmcchineseparts.com/produ...
$21.90 - Gas Tank - Pit Bike
www.vmcchineseparts.com/produ...
$20.95 - Air Filter - 38mm Two Stage UNI
www.vmcchineseparts.com/produ...
$19.95 - Rear 10" Adjustable Shock
www.vmcchineseparts.com/produ...
$19.00 - Brake Rotor Disc 190mm
www.vmcchineseparts.com/produ...
$19.00 - Seat 18.25" Motorcycle
www.vmcchineseparts.com/produ...
$12.95 - Twist Throttle Kit
www.vmcchineseparts.com/produ...
$10.50 - 36" Brake Hose
www.vmcchineseparts.com/produ...
$9.95 - Brake Master Cylinder
www.vmcchineseparts.com/produ...
$9.95 - Engine Cover Mounting Bolt Kit
www.vmcchineseparts.com/produ...
$8.80 - 20" Brake Line Hose
www.vmcchineseparts.com/produ...
$7.95 - 12 x 3.00 Tire Inner Tube
www.vmcchineseparts.com/produ...
$6.60 - 39" Clutch Cable
www.vmcchineseparts.com/produ...
$5.95 - Body Fender Bolt & Nuts
www.vmcchineseparts.com/produ...
$5.60 - Kick Start Lever Kickstarter
www.vmcchineseparts.com/produ...
$4.95 - 14x2.25/2.25 Inner Tube
www.vmcchineseparts.com/produ...
$200.00 - Core
$35.00 - Miscellaneous Hardware
$26.60 - Foot Peg & Kick Stand - eBay Item#362574953784
$23.93 - Wiring Harness - amzn.to/39eFfef
$16.95 - 220mm Brake Disk - eBay Item#162701189992
$14.95 - Wheel bearings - eBay Item#182747086786
$13.95 - Handle bar grips - eBay Item#292981792076
$12.00 - Brake Lever - eBay Item#254271921375
$12.00 - Shift Lever eBay Item#171939820943
$10.59 - Fork Oil - eBay Item#372683377589
$10.50 - Fork Seals - eBay Item#161867430471
$7.99 - Chain Slider Guard - eBau Item#183229740880
$6.78 - Clutch Handle - eBay Item#253810607241
$5.10 - Dip Stick - eBay Item#372733527247
$825.14 - Total Cost (not including powder coating)
Thanks for watching!!!
Copyright Free Music used:
Adventures by A Himitsu ruclips.net/channel/UCgFw...
There It Is by ZAYFALL / zayfallmusic
All Night by Ikson / ikson
Bay Breeze by FortyThr33 / fortythr33-43
JPB - High [NCS Release] • JPB - High | Trap | NC...
We Are One by Vexento / vexento
The builds just get better each time
Thank You!
Great build, love the fact you kept it real and showed us the difficulties you ran into and the solutions! inspiring….
I don't have any patience for tube tire changing....I hated it with bicycles as a kid...lol.
The most valuable thing I learned from your channel is the simplicity of those little engines, and how cheap they are to repair.
Nice work. 👍
Thanks! Glad to hear you like the content and yeah 100% they are cheap and an easy way to pick up small engine repair skills.
The tubes happen to the best of us...also my hat goes off to you pb you have a lot patients I really enjoy how you really take these bikes and quads apart down to the bare bone and build them back better than factory 😎🖒✊
Thanks brother! I appreciate your continued support! SMH on those tubes man, they about killed me!
deaunte love I agree
Thank you thank you PB. Finally got back home and had time to watch it. Very informative as always. Can't think of a better way to relax after a long day. :)
Love it! Thank you for the support, I appreciate it!
Yo that’s legit, I need to restore my $50 pit bike!
Nasty Moto Do it man! It’s a blast!
Praska Boy's Garage I’m planning on it, just gotta get the funds lol
@anonymous whys that?
On the video that you got the Chinese 125cc and restored it! That helps me so much cause I’ve had one but it’s been sitting and I had no clue where to start but now I feel confident I can get it running again no problem and if I have issues I know where to come back too! Love the vids man keep it up!
Brayden Martel Thanks brother! Good luck on your project and if you run into any issues don’t be afraid to ask! Here to help any way I can 😉
Awesome fricking job!! Looks great and thanks for posting and can't wait for another quad vid! ; )
Al Southern Thank you! I’ve got 1 more project coming and then it’s back to the atvs!
Omg PB it's about time!! (respectfully said) I have been having massive withdrawal from not seeing anything new from you in ages!
Lol! Man this one the struggle was real, but we made it!!! I promise you won't wait as long for the next one :)
I really appreciate how you know how to talk dirtbike....
She's a little beauty , great job !
Thank You!!!
Dude, that pit bike looked great before you restored it, though when it was done. It looked absolutely amazing. Keep it up my dude!
Valium YT Thanks man, will do!
yay i was waiting for this one !
Most shop hours on a project to date! Worth it!
This was a great video just like the rest of yours. Glad I found your Channel. You have inspired me to find a project bike and do the same. Thanks man and keep up the awesome content
scott smith Thanks brother! I appreciate the support!
Great video really enjoyed watching 👀 I've learnt alot from watching this thanks ever so much for sharing 👍I'll be watching more of your channels to learn even more on projects thanks alot pal 😉👍👌
Nice i love how u show the ups an downs, nothing always goes as planned, I like how ur creative an go with the flow, nice work
Thanks dude! I appreciate your feedback!
Just found your channel and i love it. i could feel the frustration when you found out that tube was popped. been through that process with my dad back in the day! i also have a pitster pro 140 with an oil cooler, you inspired me to go get it out of the storage unit!
Glad you found it and have enjoyed the content so far! Absolutely you need to get that 140 out! The perfect riding weather is right around the corner!
Dude I just wanna tell you your videos are really good. Really informative really smooth transitions just all around quality video style. And your rebuilds of the bikes are just great. I just found your videos yesterday and subscribed immediately you were at 1.6k and now you’re at 2.2ish and growing. Keep up the quality videos and have fun on the grow spurt you’re about to go through lol.
Thanks man! This video has blown my expectations already, I appreciate your support! Thanks for the sub!
That bike is sick!
SpyroPyro Thanks!
Dude..i'm so glad i subbed your channel..freekng learning while i'm entertained..digging how you knock out every obsticale that blocks your goal to complete this build...color scheme is awsome...
Santiago Elias Thank you so much! I appreciate the feedback! Glad you like the channel!
Enjoying your channel. I like your shop setup. I appreciate that you complete your projects on one video.
I'm glad you like it! I built the shop almost 3 years ago with the intent to work on power sports. Has been good to me so far!
So amazing just bought a chine atv road legal needed some work and learning while I watch! Loving all of the videos! Keep it up!!
Thank you! Good luck on your project!
Restoring bikes is so fun and can earn u money I was raised in the garage and I saved money till I was 12 then I bought a mess of a ttr125 and I myself went thru it and fixed it up and on December 28th I ended up trading it for a fully built kx125 which is worth way more and fits me better seeing how I’m 16 now
Love it man! I got started with a box of parts from a 49cc pocket rocket. Put it together together and never looked back. Good luck on your future projects brother!
great video! I ended up watching the whole thing.
BigBrotherFrank That’s awesome, thanks brother!
I like the quote that the video ended with. Don’t get me wrong the video is cool. I have 3 ssr’s i am rebuilding. We’ll one almost done, one kinda finished as we got plastics today and then one down to a frame. We got a tao Tao also 110cc. Some goof ball put wrong spark plug in it locked it up. That one is a complete rebuild . I have to get a back swing arm, tank and odds and ends for the 3rd ssr. The video was cool glad i took the time to watch start to finished. Great content. Bike came out looking sweet!
Awesome job.
Thanks!
Nice I’m looking myself for one to build up and ride with my son and his 125 ssr good work
Do it man! This one was a blast!
Yo you are a AMAZING Mechanic!! Keep up the good WORK AND YOU WILL BE ON TOP! BTW YOUR VIDS ARE AMAZING!!
Twitter Thank you so much! I appreciate your support!
Awesome Job right there
Petrus Määttä Thank you!
really great video. keep up the good work
Michael Blackler Thank you brother! 🙏
I just found your channel and although you dont have alot of subscribers dont let that discourage you we all love the content man thank you
Thank you so much!!
Great Job
Thank you!
You have the perfect sized shop!
Thanks, I actually think I'm starting to outgrow it. I really want to buy metal working tools but just have no place for them. Maybe someday, but for now I am very happy with what I have! Thanks for watching!
pro life tip, when using tubes put a tiny amount of air in them first, will keep from twisting and causing hot spots to pop
I commend your level of patience
Lol, thank you!
Bout time I find a good pit bike video. Nice bike
Thank you!!! Glad you liked it!
This was a great build.
Amazing Work!!
Alex HD Thanks brother!
Im currently doing one rn well slowly i am while doing my sons 4 wheeler an alsp while messing with my eletric an nitro rc i love anything with a motor man
I am right there with you man! Anything small engines is what I'm into!
This takes a lot of time and effort
This work is art man👍
I appreciate that! Thank You!
@@PraskaBoysGarage 👍
Keep that great content coming man nice
Thank you for the support! The next project is currently on the table and coming to the channel soon!
Great vid
Thank you! Glad you liked it!
I’m doing this with a 2007 Baja dirt runner 90 right now, sending the frame off to be sandblasted and powdercoated in the meantime I’m going to rebuild the top end , previous owner suspected blown rings
I live about 20 minutes from rim right and didn't even know it was there.. I have been looking for a powder coater.. Thanks for the video..
That's awesome! Dan and the team do great work, and I have been using them for years now. He has rebranded and the shop is called Right Now Power Coating. He also has a RUclips channel, so if you into powder coating videos you should check him out.
@@PraskaBoysGarage I will do that.. I'm working on a chinese atv now for my nephew. I'm putting a 212 predator motor in it.. I enjoy watching your channel..
You’ve done a really great job on this build
Thank you so much!
Thank you 🙏
Just a quick tip if you ever do tires on a bike again use dish soap on the bead. It’s night and day so much easier with the soap.
Great tip! Thank you!
Amazing video
Thank You!
I love this
Thank you!
thank you
I barely comment on videos but this video is well put together and i really enjoyed it, well-done man keep up the good work 👍.
SMK_ADLAY Thank you very much! I appreciate the support!!!
I find that if you put the tube in the tire first and fill it with just enough air to keep it round but not full I pop way less tires. Also the counter mount tire changer from harbor freight is fantastic!!!!!!
Also you do an AMAZING job on these Chinese bikes! They are my favorite. Cheap and easy(most of the time) to work on!
Jonathan Roberts Thanks man! Usually I’ll edit the video of me getting it done the first time, but with the tubes I felt like sharing my pain might show some viewers these projects aren’t so easy and even guys that have been at it for years still struggle sometimes!
Thatz a guud 1 niccee jobb bro
Thanks!
Liked your video, I’m well aware this an older video and I’m sure it’s been said already but I think the spacer is a round aluminum/steel tube roughly an inch long or smaller that goes to the left of the brake caliper, thus putting the caliper up against the frame when you tighten the rear nut. Hope this helps next time.
Good looking bike I dig the graphics
Turned out pretty good! They haven't held up over time but that just gives me an excuse to do them again.
Right on did they fade out or peel off?
That’s a nice little shop you got there
Appreciate that! My flashback on snapchat has videos of me building it 3 years ago already!
Omg dude, I love ur channel. I’m buying a Chinese dirtbike and wanting to do a rebuild. I’m only 14 so I’m hoping to do a lot more than just this one build. I’m inspired by u. Keep up the good work!!!
Thanks man! Good luck on your project and let me know if you have any questions!
Thank u so much for taking the time to respond. The bike is a Baja dr 70. I plan to completely redo everything on it, I don’t have any questions right now but I prob will. Again thanks so much for responding. Stay healthy and keep up the good work!!👌
When you found out the inner was punctured I felt that. I hate when that happens
I almost let it defeat me that day in the shop! Im glad I pushed threw it!
Seriously boss paint scheme.
I have a taotao 125 db17 that I'm rebuilding and it is a beast cool bike I subscribed to your channel, your videos give me some sick ideas for my bike keep up this sick work
Right on! Make sure to vote on the poll I posted yesterday! Thanks!
Keep it up brother
Thanks man!
What a legend for replying to every comment after a year
Thanks dude! I don't have other forms of social media so I want to make sure I connect with everyone on RUclips. Eventually I hope to have so many comments I can't keep up, but until then I'll be here!
Super dope 👌👌👌👌👌👌👌
Thank You!
Nice work
Thank you!
This is more my speed. “Made in China, MODIFIED in the USA!”
SSRs are made in the USA
@@orlondootero5350 nope
Hot tip soo u don't punched tubes when installing them again use hot soapy water it makes the tyre alot easier to get on and off the it makes the tire a bit softer and the soap lubricates the tire. The tube put about 10psi in it it stops u from pinching your tube and using hot soapy water makes the tire soft and lubricates the tire for easy installing no screw drives needed to put the tire over the bead
Just push down hard on the tire and just be careful the tube doesn't get stuck under the tire
Thanks for the advise!
Good video !!
Glad you enjoyed it!
I use bicycle tube from Walmart the one with the lime inside...just into new ones comed in the mail...and they work good
Good deal! Glad it worked out
Need to see u ride these projects
Can’t Believe you popped so many tubes I mean it’s still a great video
Neither can I... I thought about editing it out and making it a smooth transition but it's a good lesson that sometimes even the simple things can be a struggle! Thanks for watching!
Braaa thts raw asf
OGxB Aim Thanks brother!
Next time, use some soap and water while mounting your tires, plus add a bit of air to the tubes. Excellent video!!!
I know time laps hides a lot of the details but I'll tell you, if I put any more soap and water on that thing I would have started a pond! I was using everything I had. The tires were pretty hard so I'm assuming they had some shelf time to them!
@@PraskaBoysGarage LOL, nice!! Maybe you were just unlucky. It has been years since I pinched one. A couple of nice spoons and a bead buddy help too. Anyway, loved the video, and thank God for Amazon.
You got my interest from the moment the engine is looking straight not up
I'm soo excited I made a purchase today i bought a 05 Honda trx 450r and my o my I should have done it sooner
Those are nice quads man! We had a TRX 250X before and we ripped that thing a lot!
great worjk, how did you solve the clutch problem? i have the same issue
Little tip if you pinch your tube when installing it, instead of buying a new one get a bicycle tire patch and it will work great
Thanks, I think frustration got the better of me that day! I will remember that for next time!
Good job buddy! But i noticed you had a couple Japanese atvs in the back round lol. Thanks for the content 🙏
Hey thanks Leonard! Yes, we have a little bit of everything. The boys daily ride their Raptor80 and a RZR170. Basically if it's motorized and made for Youth riders I work on it!
Once you put the new tube in, inflate it a little so it spreads outwards nicely away from the rim. And use a lot of lubrication. WD or similar.
i just got into riding and bought a lil 125cc and man ive popped like 10 tubes! hahahaha i feel your frustration
Tell me about it, the struggle is real! Trust me, if this wasn't a DIY channel I would have paid someone!
Such a talented guy I wish I can I do my bike like that
Thank you!
You can, time, patience, paint and accessories and your own creativity.
awesome job I would highly recommend tucking that brake cable away to a safer routing location.
Hi great video! ! Can I ask how did you cpmpres the rear shock spring to be able to take it apart please?
I just use 2 ratchet straps and a couple of microfiber towels.
I wish you were my next door neighbor! I would invite you over for bbq's and try to trick you into helping me with my chinese quads. Lol
Thanks for the videos!
Man, I tell you I'm a sucker for some good bbq! I'd probably start breaking your stuff on purpose so I'd have an excuse to come over!
@@PraskaBoysGarage 🤣🤣🤣
Can you explain to me why my 125cc clutch cable has a heap of slack to the point it won’t actually engage the clutch lever on the motor and I’ve adjusted the clutch cable to as tight as it will go on both ends and still nothing please help
Looks good but two things killed me the powder coat on the spokes made it look cheap and the revving it while it's on choke without letting it just warm up. Lol good job tho I'm in the middle of a rebuild/refresh on my DR-Z400 supermoto. But I'm looking at buy one of these for my daughter are all the parts easy to source?
I appreciate the feedback. The spokes were defiantly an over site on my part, mostly from an adjustable point. Cosmetically speaking everyone has the own opinions. Right call on rolling the throttle. I was a bit excited since the project took so long to get to that part! When it comes to parts they are all pretty universal for the 125cc bikes. I've used VMC for years on parts, but also eBay and Amazon carry almost everything you need as well.
How well does that high heat paint hold up? Especially on the hardware when you remove a bolt does it chip?
Powder coating is the most durable paint they offer. It holds up great and I highly recommend it if you can fit the cost into your build budget.
You're a beast
Like I had mentioned, I like taking these, modify that crap out of it and show people just what these things can be.
Any clue where I can find 2017 xmoto 125cc pit bike fairings?
Sorry I don't. The xmoto bikes are a little different set up then the typical chinese clones.
Hello I'm from the UK, Currently looking into Buying a stomp 125 pit bike off my friend but it's basically brand new, may start buying cheap projects in the new year to flip
Do it! The parts are cheap and they are easy to work on!
What kind of sprockets do these use as stock? I have a 110cc samurai and 125 bse, I'm using 16/30 on the BSE, 17/36 on samurai, as stock the samurai only got around 50-55km/h with super high revs but now it does 80~, pretty stupid transmission ratios if you ask me :D
I would have to double check my ratio. I didn't even look, I just assumed mine was stock and left it the same. Shes quick I know that!
I have a tao tao 125cc. What carb are you using? Mines won't start.
also when you put inner tubes and tires on rims use fairy liquid in hot water it makes it so the tire and tube go in easier
Thanks for the advise! I've never used that method before so I will have to give it a try!
I'm working on an old Baja 90cc and the tank is kinda trashed. I was wondering if that tank would work it looks alot like it. Anyone know where to get it?
Try less air in the tube when installing and use dawn dish soap as a lubricant between the tire and rim
What pad did you use on the grinder when you took off all the engine paint?
It's just a simple 4" wire wheel attachment for a grinder. Here is an example on amazon: amzn.to/38aqXcD
Praska! I’ve got a question for you. I’m looking to order a replacement motor for my SSR. Do you know if the motor mounts are the same for all the pit bit brands? Like is the tao Tao motor fit the SSR? Thanks
Yes sir! If you notice my red engine stand, I put all my motors on that same stand. Anything 50cc-125cc Chinese E22 style or Honda motor fit. A TaoTao motor will fit the SSR mounts.
Question for you. I have one of these chinese quads. ( not running) i replaced the wiring harness and also the stator but i have no spark. Any ideas?
MrBrian198 Been there many times! Did you happen to watch my wiring video? It shows step by step how to hook it up. I would reference that first. If everything is correct then it’s time to start trouble shooting.
Praska Boy's Garage i did watch the video. Im going to order another harness and do it again. Thank you for your speedy response!
Nice amezing
Thank You!!
I heard a ticking sound when you first start it do you know what the problem was becouse I have allot of problems with it
Right after the video was posted I swapped out for a 26mm mikuni carb and haven't had a single riding issue in the last 2 riding seasons. You can buy a knock off on eBay for under $30 bucks.