Eachine E011 Easy FPV Mod
HTML-код
- Опубликовано: 9 фев 2025
- Super easy and cheap FPV mod that turns your Eachine E011 into a Tiny Whoop FPV racer.
Eachine E011 Block Drone - goo.gl/T45TD6
Crazypony Canopy - amzn.to/2HAORnt
▼ RC Gear
Turnigy Evolution - goo.gl/xp5AGq
FrSky Taranis X9D Plus SE - goo.gl/N4PxtR
Fatshark Dominator V3 Goggles - goo.gl/ixDi1w
▼ Camera Gear
Sony RX100 Mark V - goo.gl/yaQvft
GoPro Hero Session 5 - goo.gl/4PA6Bn
Hawkeye Firefly 7S - goo.gl/v2NGCQ
RunCam 3 - goo.gl/SU0gtS
RunCam2 - goo.gl/QS3pzu
Xiaomi Yi Action Camera - goo.gl/u30TkK
Mobius Mini - goo.gl/L2oNNu
Samsung Galaxy Note 5 - goo.gl/1uOSFg
▼ My Video Drones
DJI Mavic Pro - goo.gl/ecxdZQ
Yuneec Breeze 4K Selfie Drone - goo.gl/3YhDwY
Hubsan H109S X4 Pro - goo.gl/FL4jss
What I use to edit my videos - amzn.to/1VJHWp7
SUBSCRIBE TO MY CHANNEL - goo.gl/b1cZZM
Wow, the recoded fpv inside the house is amazing with this AIO and I like the canopy, Very clean setup (cam raised above the Fc).
Does eachine make a little quadcopter with these motors that's already got the fpv camera installed?
Hey Albert, you said earlier that you have the buy all parts one by one. But I can't find the controller for it. I don't own any controller that might be compatible. So I want the stock controller. Do you have a link for that? And also the canopy you used in the video. Thanks already!
Great set up.
Btw, the on board battery plug has slots in it allowing you to connect your losi connector batteries without modification.
thanks for the tip!
I feel the need to correct you. If you bridge the two battery terminals you will not fry the board as that is a dead short circuit. What will happen in a matter of a second is the battery lead wires will get red hot and burn you as you will be still touching then. Also highly likely is next the battery will get red hot and may burst into flames. All this if you don't very quickly break the circuit or the battery lead wires melt breaking the circuit.
But trust me you will not fry the board. If you reverse the battery wires and don't bridge the connectors, this will fry the board.
Yep, bridging the battery terminal wires will definitely explode the lipo!
My mod worked real good, thanks. I do have another question. Where do you get your small self tapping screws from. I need some for this and other mods that I'm working on. Thanks. Robert
I got them off an old toy drone I took apart. I almost never throw anything away. LOL.
is this the standard or the 'osd connected' camera? there are both in that link. and can i get a smartphone app to fpv this?
Great video. Is it ok to use a 300mah battery with the mod. I no my old stock one is 260ma. Thanks.
I flew mine with a 300mah 1S lipo.
Thank you sir for the info.
Did you use 2 batre? In that drone.
After some use, was there a distinguishable change in flight time/characteristics with the battery mod?
I have done the same fpv setup on my E011 and have a wealth of extra stock batteries so I'm hesitant on modding the battery connection...BUT if there is good difference, it would be worth the hassle.
Thanks for the video!
it's about the same.... just stick with what you got.
nice one!
how much flight time do you get? i get 4 min with stock battery
+always rc reviews! That's about right
Great vid man. I'm planning to do the same with batteries. What charger do you use to charge your Turnigy nano-tech 300mAh 1S?
The E6 - goo.gl/RbhPxs
Maybe stupid question, in to which slot do you plug them in? I'm pretty new and I'm getting lost in all the pins/slots/adapters etc ...
where can i buy that canopy?
How does the flight performance compare to a Tiny Whoop? More/less punch? Faster/slower? More/less nimble?
With the toy transmitter it was harder to fly than my Tiny Whoop with hobby grade transmitter. However, with the multiprotocol module in my Taranis, it feel as precise as my Tiny Whoop. I will have a video showing how controlled it is with the Taranis. Really smooth. It definitely has more power with the 7mm motors but is also heavier so requires a little different way of flying it.
Nice Mod and flying. Name of song / artist pls?
Search soundcloud... Daft Punk, Son of Flynn (remix)
Orientation of plugs at 2.00, my banggood plugs (-Excellway® 100Pcs Mini Micro JST 2.0 PH 2Pin Connector Plug With 120mm Wires Cables) were reversed to yours, started full throttle and reversed. ended well reversed plug no obvious damage---If you look at banggood ad different pictures show different orientation--will now check twice .
When I tried this mod, my video cuts out at full throttle. When I increase the throttle the video starts getting fuzzy, then cuts out at max throttle. This happens on a fully charged battery.
I used a 3d printed camera mount with a camera set at 25mW. The only difference is that I am using the eachine e011c (the christmas one, with the speaker removed)
Nice and easy explanation thx
thank you!
Did u update the firmware for the e011 to use acro mode...?
I tried to but something went wrong. The board seems bricked. I tried it on a second one and bricked that one too. I won't be working on this again.
Albert Kim thx! Looks like i will give it a miss too
Nice mod.. I see you also drive a Nissan Leaf.. me too
Love my Leaf... 😀
What affordable goggles do you recommend?
ruclips.net/video/wihYZV5RyrA/видео.html
camera canopy link doesnt work
This battery how much mAh
I wanted to buy this canopy too but saw the one from BetaFPV looking better (www.amazon.com/BETAFPV-Whoop-Plastic-Canopy-Transpartent/dp/B072FW3PV4/)
I measured 34mm between the 2 holes, could you confirm the dimension between the 2 holes on the e011 frame ? (didn't received mine yet)
Thanks!
Great, many thanks!!
we need to get Eachine onboard with Spektrum /Frysky (wishful thinking). so we don't have to use those little toy TX's.
pointnozzleaway or fly it with a Devo transmitter flashed with DeviationTX and 4in1 module. Or a Turnigy 9xr Pro or FrSky Taranis and a IMAX multimodule. Not that difficult and can fly almost any quad, heli or plane on the market.
wtf were you watching