How to Flash the Eachine E011 with an Acro Firmware
HTML-код
- Опубликовано: 9 фев 2025
- A guide on how to install / flash the acro capable Silverware alternative firmware from silverxxx on the Eachine E011 quadcopter.
Links:
ST-Link v2 USB Programmer on eBay
www.ebay.com/sc...
ST-LINK Utility
www.st.com/en/e...
Keil MDK
www2.keil.com/mdk5
Eachine E011 Alternative Firmware on GitHub
github.com/sil...
Written guide on flashing pre-compiled firmware using ST-LINK Utility
www.rcgroups.c...
Written guide on compiling and flashing using Keil
www.rcgroups.c...
Silverware Wiki
sirdomsen.disks...
So stoked I finally got this figured out...At first I was running the B-whoop hex file..Then I got the Keil vision on there. Soooo stoked. My custom quads just rip now. Still learning how to do all the adjustments. Your vid really helped me out. Thanks for making this video. I did brick one board doing this. dang. Ordering a bunch of these boards now. Peace out.
I was waiting for a good video on this.
You always do good quality stuff.
+Mayur Seebun Thanks! Hope you find it useful!
Yes, nice video !
Can i'll isk af can i add somehow throttle Expo ? And ome calibration on new firmware ? sticks to left don't work anymore :( At house is level more furniture-friendly :)
Thank you !
can i flash this program on the eachine 010?
Will this work on the e010?
Im happy with this solution, thanks for this video !
Thank you man, I´m preatty noob at this but I want to try flashing my E 011 and my JJRC H8 mini to learn how to fly them on ACRO mode before I take that leap to racing quads... Got a new sub here, all the best...
I did this on the E010 and it worked perfectly. Muchhhhh Bettttterrrr👌👌
Seriously bro😂😂😂
Did it work
Do i realy need the USB adapter? because i had an USB kabel and i soldert it direct to the board but the software says no st link found. Is there any other software i can use to do this?? (Sorry for my English,im from germany)
Where can you find those pins to solder onto the FC so you can hook up the usb flash drive and flash the firmware ? Thanks!
this can work in eachine e010 with stock trasmitter??
i have a e011c , i want to flash it with nfe . is the read protection nessary in st link or can i directly use keil ? i can,t connect with st link or adjust the read out protection in option bytes
can you make a video on adjusting the pids?the basics of what to mess around with and the do's and donts when flashing like rates,motor vibrations and all that
Is it going to work with eachine e010
hi guys i suceffuly flashed my e011 but when hovering my drone if rotating to the left on its own just but alittle. how do i fix this? usually the is a trim button on remote but the e011 doesnt have one
There are three video tutorial that i've watched, and all use 3 pins : SWDIO, GND, SWCLK also use lipo battery. Why use lipo battery connected to the board insteads using 3.3v pin from ST-Link ?
Nice! :) Informative video. This method can be also applied to other quadcopters(H8 mini, Bayangtoys X6, etc).
Thank you! Yes, just make sure to use the corresponding firmware. (Also, I think only the E011 has mislabeled pads.)
Does it work on the e010 because the e011 can't be bought anywhere!
a brother I got a question fo u can you use the Devo 7 transmitter to the Bumblebee whoop Pro to bind and fly ?
I never thought that could be possible !! Thanks for this very informative video :D
Does this also link to the fs i6x transmitter?
Thanks for the tutorial. Will this work on the Furibee H801?
Hi ! Good job ! I'm impressed.
I love E011 quad. Balanced, powerful.... the option to flash it is great.
I wonder if I can do the process using a macbook ?
Do you know if it is possible to ad an usb port to connect it to beta flight ?
Thanks for the video !
Where did you learn the videography skills from? Really enjoying the angles and the bokeh.
Genuine interest, a course in high school and lots of experimentation. Oh, and of course: Watching a tons of photography videos on RUclips :)
Fantastic video. Great quality, great audio, and you guided me through the exact process. Worked perfectly, thank you! I shared your video on my FB Page: CarolinaQuad for others. Keep up the good work!
So is there any cheap toy ACRO drones that are RTF?
Do you think i could connect 2s battery to eachine 011? If i would upgrade the motors to a 2s brushless motors?
Thank you for your answers☺️
no it dont support 2 s it will smoke
i got an error. flash download failed. cortex m0. what am i doing wrong?
Very useful, I might try it out.
Thanks !
Do you have to have a Devention TX?
Hey is this tutorial still works on new e011 boards, i bought one for installing acro firmware and saw numerous feedback(on banggood product page) about not being able to flash on new boards, it sucks
I have some issues aswell. I have 2 new H67 santa quads from JJRC and I was able to flash one but it just blinks 4 times with the leds. this means the Gyro is not working so it wont bind or do anything.
did u find a fix?
After flashing the firmware, I can't seem to bind this to my FlySky FS-i6S using the iRangeX module. Is there a specific arming method that is different from the stock firmware?
n/m after deciphering several vague guides, I found that shorting the TX and +5V pads on the iRangeX module and setting FS-i6S output mode to PPM will get the module to bind. Although the acro gesture does not work =/
Great tutorial!
imgur.com/PV1LCZk cant connect, everything seems fine with connecting up, even stlink was updated, no luck.
"Can not connect to target!
"
do you solved this issue? i also can't connect=(
@@fut33v nop
Hi, I just flashed my E011C following your method. Now, my quads led just flashing rapidly and cannot bid with my TX. I am using a Bayang External protocol on my QX7. Please helpme.
Here's the solution: ruclips.net/video/axvA4xmmMzk/видео.html
Hi! I flashed once my e011 , no problem.but when i wanted to flash it again to modify rc rates, the STM link doesn t want to reconnect to the board.
checked all connection, connectivity with multimeter, always got this message: cannot connect to target...
any idea ?
Thank you
+Josip_ OG No sorry, I recommend asking silverxx in the RC Groups thread www.rcgroups.com/forums/showthread.php?2868518-Eachine-e011-Review-Mods-and-ACRO!!!(always-in-construction)
RCview thank you.
tell me if you find a solution please.
Thank you
Wait, why does HE have to look for a solution for YOU? @@josip_og9195 are you paying him?
He was kind enough to find and link you to a forum. you need to learn to find answers yourself too. you wont always have someone around.
Kirill Obraztsov sorry for that man...keep calm and enjoy fpv flying.regards
can this be done with the e011c?
Hi!
I want to know whether acro will work with the stock e011 transmitter?
You know.......the small stock remote
Yes it works, but I hear it's very difficult due to the transmitter being so imprecise.
What would be the code to fly it in acro mode with the stock tx?
@@charliedcho it's super hard , cause when you move the right stick gently nothing happens , the left stick seems more precise
did anyone try using the alternative pins on the board?
Has anyone had trouble installing Arm Keil? I'm on windows 7. And keep getting a corrupt file message. I have tried version 5.25 and version 4.74
help me, i am cannot connect to st link v2, in description log is "No target connected"
before I've used it, but this time can not connect
becouse this fake tutorial bro
After Flashing My E011 my trim buttons do not work!?!....Any idea how I can fix this? I am using the stock TX.
Psyan1de can’t help with the buttons, but you can try calibrating the accelerometer with stick gestures. Make sure you’re on a level surface and push the right stick down 3 times. It should flash, then go solid.
great editing and videography
this can be used to Eachine E013 ?
Sorry, not that I'm aware :(
Really useful, thank you for this video tutorial!
If I try to connect to the board, I get an Error saying:
"
Can not connect to target!
If you're trying to connect to an STM32W1xx device, please select Normal or HotPlug mode from Target->Settings menu.
If you're trying to connect to a low frequency application , please select a lower SWD Frequency mode from Target->Settings menu.
No target connected
"
If anyone knows how to solve this problem, please let me know!
Felix Baum had same Problem, swapped the dat and clk solderpoints on the board
FredericoSecondo Unfortunately that changes nothing :(
delete and redownload the eachine e011 silverwave, if work for u.......
To enable onboard expo rewrite DISABLE_EXPO to ENABLE_EXPO :)
IF YOU HAVE A "CANNOT CONNECT TO THE TARGET" MESSAGE !!!!!!!!!!!!!!!he says in the video that you have to plug the battery in and then open the st link utility. Correct way is you have to plug the stlink usb thing to the computer (connected to the board) ,open stlink utility and THEN plug in the battery and click Connect. Hope that help someone
This solved my issue - thanks
Love you :D
yes tried it 10x, still nuthin. :(
does it work with e010?
Yep. It does.
Nice job! I looked into this, once I saw how much work was involved, I resolved to simply pay $30 and buy a new FC if I really wanted acro ;) What flight mode do you get by entering the Konami code? LOL
You get the improved FPV signal power-up of course :)
thank you!
Good stuff
Thank you! Your video on the subject was a great help when figuring this out :)
RCview i wish i had your editing and flow skills
I put a special santa-firmware together and made it available on github: github.com/tulingBerg/SantaWhoop
With that, you can keep the sound module as a buzzer...
This stuff is getting too small to see. Need a sub-miniature soldering hand.
I so want to do this and then I watch the video....and my head starts spinning....
stop share hoax tutorial bro
The video would have been so much better without the awful annoying piano music to contend with .... 👎👎👎
Work with the e013?
David Alejandro Montes Rodríguez did you try it?
Work with eachine e010?
Seriously 🙄
Does it work with the e010 too?
Does it work for E011C as well?
yes