Supersize ANYTHING for Cosplay with a 3D printer
HTML-код
- Опубликовано: 8 апр 2023
- Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/OnceinaSixSideRaid and get a special starter pack with an Epic champion ⚡️ Kellan the Shrike ⚡️
www.buymeacoffee.com/onceinas...
Get the chainsword files for FREE!
www.printables.com/model/4708...
Sovol SV06
sovol3d.com/products/sovol-sv...
Monocure3D Filament
monocure3d.com.au/product-cat...
Music
/ @onceinabside
Stuff I recommend
(Affiliate Links, thank you for using!)
Mars 3 Pro - shrsl.com/3yecr
Anycubic Mono X - shrsl.com/3yeco
Neptune 3 Pro - shrsl.com/3uxq8
Neptune 3 Plus - shrsl.com/3uxqa
Elegoo Mercury Wash + Cure - shrsl.com/3yecp
Anycubic Resin (cheap and cheerful) - shrsl.com/3yecn
Chitu Resin (pricey but AWESOME) - geni.us/UZbXHA6
Esun PLA+ - geni.us/lsrS
Elegoo PLA - shrsl.com/3uxq7 
Хобби
Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/OnceinaSixSideRaid and get a special starter pack with an Epic champion ⚡ Kellan the Shrike ⚡
our boi made it 🥲
Shame these are for new players for you to get credit, already clicked for another.
An excellent build well done. Just one small thing turns me off 3d printing...its the print layer lines that show through... I guess light sanding wouldent help?... aside from that ..top notch👍👍
Thank you for providing feedback on our printer and I'm sorry for your poor printing experience.
We have always taken the quality of our products very seriously. And our team has been working hard on this as well.
As we are developing and producing our own products for the first time, we have had a lot of difficulties in this process. We do have shortcomings, but we have made some improvements. We will always provide a good after-sales service so that everyone's printing job can run smoothly. Thank you!
Thanks again for sending over the unit for use on the channel! If this printer was just a little more feature rich and price competitive it'd get a recommendation from me, otherwise I think the SV06 is better suited to a different crowd. For us tabletop gamers and cosplayers at least, there are better options right now for PLA focused printing.
Honestly, the layer lines kinda work. It seems kinda believable that the Imperium would leave the mass-produced weapons for the Guard in a functioning but still industrial-ish crude shape to feed the mindbogglingly huge war machine.
My thoughts exactly! 😁
great way to handle the sponsorship req and keep it still fun for your viewers. The effort is appreciated!
You have to be some kind of modern daVinci because not only are your videography and sound engineering top tier, but I also adore your sense of humor and am impressed by the depth of your technical knowledge.
It's disheartening to see the numbers your videos are doing because I can see the gargantuan amount of effort that goes to your videos.
Here's to your channel growing and thank you for inspiring me in pretty much all the hobbies I managed to pick up in the last few years!
Well that's a very nice comment, cheers! I'm certainly no DaVinci but I'll take it 😂 Happy to hear you're enjoying the videos, lots more to come!
YESSSS Daddy Raid Shadow Legends coming in to pay those bills!
😄
"Won't that annoy some people." I view it as a necessary Chaos touch. It is just something that has to happen to keep the channel chugging along.
🤣
never thought that I would like layer lines, this looks cool as hell
I appreciate designers who make multi part prints that are easy to print, always loved that feeling of sending a file to print and getting exactly what the model shows.
I'd love more FDM content. Some videos printing large terrain would be cool (e.g. Printable Scenery).
You're definitely gonna be seeing some fdm terrain printing on this channel 😄I've got a pretty good video idea in mind just for that I think!
@@OnceinaSixSide Definitely this! Your video on the tomb world is the reason I bought an FDM printer
@@benjaminjack867 No way! That's awesome :D Hope your fdm printer has been treating you well!
@@OnceinaSixSide Went with the Anycubic Vyper; I've been slaying spools for months with no issues!
Watched this video and then watched both The Raid and The Raid 2: Berandal to support this channel. Thank you.
Thank you good sir 🥳🍻
Love this!!!!!
Awesome video as always, absolutely loved the shorter version of it in the end - seemed pretty awesome!
Thanks bud :) Yeah the short version is my favourite, and what you might call a very happy accident!
Get the Bool Tool add-on! It makes doing boolean operations waaaay easier!
I'll check it out, thanks!
I’m so happy you painted it
If you enable bool tools in blender, then you can apply boolean modifiers with shortkeys, and I've found that that supercedes blenders restrictions and just goes for it. I've made a load of multipart kits this way.
Also, absolutely love your content dude, normally other aussies annoy me in media, but you have the perfect "voice over" voice, and it helps that you really know your stuff. You've really helped my find my stride in 3D printing, and I don't think I would have the confidence or know how to have printed all I have with my old Photon Mono without your help. Keep it coming!
Fantastic build but holy terra that printing head noise would drive me freaking nuts! haha
that just looks amazing, i had a blast watching this
Well thank you very much! Happy to hear that :)
Love the videos. Always look forward to seeing them come out.
Definitely more a fan of the resin printing content, as I just don’t have any desire to print in FDM personally, but your videos are always so clear and well made, it is still an enjoyable watch.
Cant wait for a review of the magnetic plates, and the resin testing video. Also always keen for more miniature reviews as well. Keep it up
Cheers! 🍻 plenty more resin goodness to come 🥳
Sick work Six! You've intrigued me in the FDM side of printing...
It's good stuff when it works!
The part at 10:50 has mirrored my exact thoughts going from resin to FDM printing. I bought an anycubic Kobra and just constant issue after issue after issue with almost 0 documentation on the printer itself. Literally nothing I did was helping and I eventually just swapped out to a Creality Ender 3 Max. Had a whole host of issues with it too and all the info that was out there was both voluminous and seemingly contradictory. After about a week of constant tinkering and running hundreds of test squares i finally got it fixed. Meanwhile my Photon Mono and Mono X have worked straight out of the box with literally 0 issues ever and I've been using them almost daily for the last 2 years.
It is unfortunate as fdm printing is really so awesome when it works, but yeah resin all the way for dependability🤘
Epic!
Next step, a working one!
Congratulations, you're a real RUclipsr now with the Raid Shadow Legends sponsorship, lol
When people say that 3d printing is a hobby in itself it is mostly true for FDM as the vid shows it because with a resin printer I never had to open it up and change some parts . When you get the settings right, the supports right and the temperature is good, it goes brrrr.
Amen!
That Sovol machine makes some pretty rad music BRRRRRRRRRRRR
Lmfao don't go giving me ideas 🤣
Best Raid ad ever.
Ha ha ha that cold opening for Raid my dude please..... 😅
I am glad you stuck it out with the FDM printers. All the issues when starting up really broke the joy for me. My FDM printer sat idle for about 2 years before I tried to get it going again. All my pain came from a small crack in the extruder which lead to an under extruding issue.
New to printing myself and only had my SV06+ for 2 weeks and now know how lucky I was to have a friend with 7+ years printing experience spend 6 hours on discord screen share between phone and my PC to get me up and running. He give me a simplify3d account and been running direct from PC since leveling. Never used the included software. NO way I'd have it doing what it is without him.
Omg, I'm so glad i wasn't the only one getting a tangling issue with the Neptune. I literally stopped using the sensor with some filaments.
Interesting! I didn't attribute that issue to the filament run-out sensor, I just assumed the spool was poorly wound. I threw on a second spool of the same filament and pulled through maybe a third of it and didn't encounter the same problem (there's a brief shot of that during this video).
@@OnceinaSixSide I keep having the issue no matter what spool I put through it. Of course I've been using Inland PLA+ pretty exclusively. I may try a different brand soon but right now I've been printing off a full size gaming table and I want the color of all the pieces to match.
Wowie! Incredible, another killer project with some great insight! Keep it up
#440in2023
Ad done well. :D
That is definitely not most FDM experiences. I think building the printer really helps know how things work, as I did with my Prusa. But I've never seem this bad of issues. I have, however, seen filament where the winding is horrible and gets snagged under itself, and absolutely hate that shit. It's why I've pretty much resided to only use Polymaker.
I've spent a lot of time on subreddits and Facebook groups about 3D printing and I've seen my fair share of dismayed users struggling with their first machines. From everything I've heard it really seems going the Prusa route is definitely worth the money! I'll have to buy one one day and see for myself.
card scrapers are great for disappearing layer lines on big areas, way faster than just sanding, tho you will still need to do a final fine sand.
Damn, I never thought I’d be one of these people but… gotta say, I really love my reliable Prusa FDM printer.
I have been FDM 3D printing since mid 2016 and never experienced as many issues that you seem to have in terms of hardware. The biggest issue I had was getting things to stick when I started, though my first printer had a glass bed which isn't good for adhesion. I replaced my 2 x 5 year old printers about 6 months ago with Any Cubic Vypers. The first Vyper performed great so I decided to get a second, which unfortunatly had issues, though working with the supplier was able to work out if was a faulty cable, replaced that and all has been good. I would say that from time to time you do get dud 3d printers, it's the same with other consumer items. Overall I have been happy with the Vypers and the only issues I have from time to time is bed adhesion, which can be fixed by cleaning the surface, which is caused by touching the surface of the build plate. I also recommend switching to a 0.6 nozzle, I don't often use the stock 0.4 nozzle anymore.
Great vid once again! If i had a fdm printer i'd print this absolute beast of a sword in a heart bit.
I really don't mind the sponsor bit, its not that intrusive since you can just skip it, unlike squidmar where he puts important steps of his builds in the background while he does the ad so you can't really skip it.
So props to you man!
Cheers! 🍻 Glad to hear the sponsored segment didn't interfere with your viewing experience 😁
Huh, thanks for the tips. I never knew MS's tool also did booleans, I use Blender and brute force my way through and clean up in MS. May have to change my workflow a little to try this.
I have a sovol sv03 that i constantly fought with and finally stopped using. Bought a bambu lab x1c and loving every minute of it.
Same. just scrapped my sv03
@@Janovich I wish i could get mine printing decently again just for those large projects where details dont matter.
I would recommend if you can pick up some 3D Gloop for gluing your PLA parts, this stuff welds it together . I highly recommend it!
Thanks! I'll try and get my hands on some :)
Feel you on the fdm printing. also make sure to keep those metal grips away from the heating and probe wires if bridged can kill main boards.(happened to me) will need to replace the whole board and go through the "fun" time of flashing a firmware.
edit: dont think thats what happened there, but one way to test for main board alone is connecting to computer via usb. if display is also connected should light up so good quick check.
Ive got to give you props for the best raid promo ive seen on youtube so far lol
Haha cheers, I'm glad you enjoyed it!
Title: "Tiny to EPIC!"
My brain: "wait, epic scale is even smaller than normal miniatures tho..."
I don't know why or how I recognized that Silhouette instantly 20:07 but that's Asamus War Construct from Solwyte Studios.
I don't own any STLs from Solwyte Studios.
Next time you give something like this a shot, I suggest the Vallejo Poly-Urethane primers. Extremely tough stuff.
Had I seen the issues you had with your Sovol I never would have purchased mine! Thankfully I didn't have any of the issues you had, don't think I would have had the same confidence in pulling it apart like that. 4 weeks of back to back printing now and other than the slow print times, I love how faff free an fdm printer is over resin.
Glad to hear yours has been smooth sailing!
when you're done assembling a print like that you should paint a coat of resin and hit it with UV to seal it.
Nice project, chainswords are always fun! I've had an Elegoo Neptune 3 Plus for just over a month and it's been running nonstop with less than a half dozen failures and they were usually my fault. I've owned multiple resin printers for years so it's my first FDM printer and let me just say I'm so fucking pleased that It Just Works after seeing the shit that Creality and Sovol owners get into.
Awesome stuff! I've had no issues with my Neptune 3 Pro or Plus either. They just work!
Awesome man, you should make one for valrak!
daaaaayyyyuuuuummmm
love the little guy
LOVE EHTTTT
I feel your pain with the printer trouble. when i got my fdm printer i ended up finding the company doesn't really tighten things well during assemble. My entire heat block was covered in filiment that squeezed through the threading around the tube in the block and around the nozzle. It was so bad I had to replace the entire hot end. Advice to all when you get a new fdm printer, dismantle and reassemble the hot end yourself before ever printing anything and make sure everything is tight.
Sir! Sound quality is ... above satisfactory.
Very good sir
I will say FDM machines are more finicky, BUT in my experience buying the Sovol SV06, talking to other buyers, and buying another printer years back, your experience isn't the typical one. If you get an FDM machine, contact the seller immediately if there are any problems that can't be fixed with bed leveling or slicer changes. They'll walk you through a fix and likely send you replacement parts for free.
If I were in your shoes, I'd have used an acupuncture needle first thing to try to unclog the hotend, and after that straight to the phone.
now we need a bolter to go with it ;)
Just get some spray putty filler primer and give it a light sand, will vome out awesome and get it looking like real steel in no time 👍
that ending LOL mine would do that, but i updated the fw and it fixed it, or you can manually adjust it, but meh,.. sv06 3 months in and its still running pretty good for me
You could put that short chain blade on the side of a powerfist and get a terminator chain fist.
The SVO6 can be a finicky bitch. I recommend flashing the hillsoft custom firmware to help counter a lot of the issues that the Sv06 has
Cheers for the tip! I'll check it out
at 13:24 thats a chain-dagger, as I call it, got something like that while converting some Cataphractii Terminators
Chain-dagger! Nice 🤘
Oof that printer is JANKY
A little bit! Quite unfortunate as it is working very well now.
Iv used monocure 3D rapid and it was not good for me, calibrated with the cones and printed pre supported loot studio files. Prints would detach from supports, bases would come out warped. Not worth it to me so I’m super keen to see how it works for you.
Love the channel hopefully you make it to full time and pump out the content. More videos more watch time.
Interesting! Yeah I'm keen to see how all these different resins stack up. Also thank you! I absolutely love making these videos and being able to do it full time would definitely bump that release cadence way up!
I'm surprised you didn't Put a hollow tube Channel on the inside So you could put a fiberglass rod for better rigidity And so it's just not plastic locks and glue holding it together And the occasional welding
It crossed my mind before I started, but it was a more appealing idea to me to make the thing 100% 3D printed. In my experience I'm more likely to print a cool model if I don't also have to source extra hardware.
I would have never suspected the extruder pcb
The thing that clued me onto it was that if I disconnected the new extruder and powered on the machine the screen would come on as expected.
The fact you didnt hit this bad boy with some sand paper first is criminal cause other than the print lines it looks dope as hell.
Embrace the layer lines! 🥳
@@OnceinaSixSide Never! haha
Loved the video and I’m printing my sword right now. What is your Dark wash goo you used?
The project is beautifully printed and panted.
did you consider something like vapor smoothing for the layer lines?
👏👏👏🙃
🥳🥳🥳🍻🍻🍻
Awesome job but those saw teeth need sharpening and a beating at the same time 😈
I purchased an FDM printer a year or so ago... Never did get it to print anything, not even the intro figure for calibration. Something to do with the feed gears or something? It was disappointing, and I really wish I could finally get it to work. So many cool things to print, and no working machine.
Damn! Sorry to hear that
Now we just need someone to make a version with motorized teeth.
Smoothing the parts would have made a huge difference in the quality, but its still impressive.
REALLY need to finish FDM prints.
Disagree!
@@OnceinaSixSide You're Wrong!
@@8BitLife69 Layer lines for life!! 😁
@@OnceinaSixSide hahhaa ok then!
@@8BitLife69 I will die on this hill haha
I really want to print this but give it an energy blade edge instead of a chainsaw. And the stumpy version would be fun to have.
Do it!
I printed a Space Marine Bolt Pistol and Plasma Pistol (with lighting) for fun, this would be a perfect addition to the collection of 40K weaponry I'm amassing...
Looking really cool 👍 FDM can be fiddly, but you persisted end result is nice!
May I ask, how much does it weight?
18:24 :)
@@OnceinaSixSide thank you
@@OnceinaSixSide the video was interesting and informative, but I think I’ve must have passed out couple of times during it (had a surgery couple days ago)
@@apinakapinastorba Thank you, and I hope you have a speedy recovery!
I just want the little Beakie boy.
should print out several #2 blades to make a long chainsaw blade.
What about the bool-tools addon? Its super simple and you basicaly just have to enable it, it does not even require a download. Edit/preferences/search:BoolTools
did you consider putting the weights in the skull on the back to balance it when fully built?
Now add a ton of middle sections and have a comically long chainsword
😂
you need the latest Prusa :D
You could print an extra long handle for the "short tactical chainswords" and have a chainspear or a chain-nagamaki (en.wikipedia.org/wiki/Nagamaki ).
I was gonna say it seems like FDM printers are one of those 'get what you pay for' deals but the shitty one was MORE than the good one!
I wonder how one of the super-expensive Prusas compare to an Elegoo.
From experience, Prusas are pretty much plug and play
what is the oil wash that you use for this
50/50 mix ivory black and burnt umber thinned with mineral spirits
How did you make oil wash?
Super simple! Thin equal parts ivory black and burnt umber oil paint with turps or odourless mineral spirits til it's about the same consistency as milk.
FDM troubleshooting PTSD 😂
🤣
Yep, my sv06 experience has also been poor, not as bad as yours
Hey Dude! If you're doing a Titan... I had an idea for a Space Wolves titan. Make Odin. Do the head with a 'beard' and one eye, give him a massive spear, runes all over, maybe the skin of Cthulhu as a pelt over his shoulders. I think it would be badass!
Sounds cool! Mine is very much already underway and it'll be a bit challenging to change course now, but I'll keep it in mind for future! A custom titan kitbash would be insane haha
@@OnceinaSixSide Odin or not, I'm sure what you have cooking is going to be awesome! Looking forward to it 👍
What type of glue for Pla?
Unfortunately this is all too common with consumer fdm 3D printers. My Anycubic Vyper has been sitting idle for the last 75 days wait for replacement parts from Anycubic because, they don't have stock. I think I'll give resin 3D printing a go.
I bet this design could be modified to work, with an actual belt mechanism so the teeth spin like a proper chainsword
Would LOVE to see that!
AARRRHHHH... trigger warning... dont watch from 8:01 to 8:04... im still shaking...
Yeah that was probably some of the worst 3d printer gore I've ever seen
Dude, the issues you talk about I swear came from my own mouth. I've been using Blender to design a "nice quality" drawer system that is modular and what not. Think,...if furniture and Legos, had a baby. Personally, my issues have been, designing connector parts that don't snag or catch on moving parts. I'm getting there though.
Blender is a powerful but temperamental beast! Honestly for your project though If say something like Fusion 360 would be better.
@@OnceinaSixSide oh I'm sure it is! I just don't wanna learn new software after years of learning blender.
isn't that Rogal Dorn's chainsword?
Could be, but it's mine now! >:D
13:10 Or make a super long version 🤔⚔
Is it possible to buy it outside of patronage?
It'll be free on Printables after the 10th of May
@@OnceinaSixSide awww but that's not tonight 😎❤️
nice, but i still think that its a little to small?
6:26 - what shoes?
Raid legends of shadows.