Toyota Corolla (2019-2024): Enabling Rear Brake Service Mode. EPB Actuator Release. No TechStream!
HTML-код
- Опубликовано: 2 окт 2024
- In this video, we will show how to enable the dedicated Service Mode for the rear brake replacement/service in 2019, 2020, 2021, 2022, 2023, and 2024 12th-generation Toyota Corolla. Using the Service Mode will allow you to fully release the electric parking brake without any additional tools or software.
PRODUCT LINKS:
1. REAR BRAKE PADS FOR GEN12 COROLLA - BOSCH BC2183 QuietCast Premium Ceramic Disc Brake Pad Set - amzn.to/3xpyHsw.
2. REAR BRAKE ROTORS FOR GEN12 COROLLA - Detroit Axle - Rear Brake Rotors for Toyota Corolla Prius Matrix Vibe Lexus CT200h [10.20" inch Rotors] - amzn.to/3vAZKQY.
ENABLING THE SERVICE MODE:
1. Turn the key to the Ignition ON position. In the case of vehicles with a push start button, press it twice.
2. Press the brake pedal.
3. Pull the electronic parking brake button 3 times.
4. Push the electronic parking brake button 3 times.
5. Release the brake pedal. The Park indicator on the dash should be flashing.
6. Push and hold the electronic parking brake button. You will hear the motors located on the rear calipers of the Corolla unwinding all the way.
Now the parking brake is fully released and you can service your rear brakes. You will be able to push in the piston all the way without the electric parking brake holding it. This will allow you to replace brake pads or do any other service on the brakes.
DISABLING THE SERVICE MODE (Before disabling the service mode, make sure that the rear calipers are fully reinstalled otherwise your piston may fall out!):
1. Pull and hold the electronic parking brake button. This will return the electric motor to the proper position. Wait until you stop hearing the parking brake motor noise in the back.
2. Pull the electronic parking brake button once to engage the parking brake. You are done.
The difference between using the Service Mode and simply pressing the parking brake button once to disengage the parking brake is the fact that in the Service Mode, it gets released completely allowing you to fully unwind the motor.
Toyota Corolla DIYPlaylist: • Toyota Corolla DIY .
Camera Used To Record This Video: Panasonic HC-WXF1 4K Cinema-like Camcorder, 24x Leica Dicomar Lens, 1/2.5" Bsi Sensor, Three O.I.S. Stabilizer Systems - amzn.to/4cn55KY.
Thank you for watching! Please support us by liking the video and subscribing to the channel!
You can also buy us a coffee! :) - www.paypal.com....
DISCLAIMER: All information displayed in the video is for entertainment and informational purposes only. You can't treat it as professional advice. Should you decide to act upon any information in this video, you do so at your own risk.
#MorozovAutomotive #2019Corolla #2020Corolla #2021Corolla #2022Corolla #2023Corolla #2024Corolla #ToyotaCorolla #RearBrakeServiceMode
PRODUCT LINKS:
1. REAR BRAKE PADS FOR GEN12 COROLLA - BOSCH BC2183 QuietCast Premium Ceramic Disc Brake Pad Set - amzn.to/3xpyHsw.
2. REAR BRAKE ROTORS FOR GEN12 COROLLA - Detroit Axle - Rear Brake Rotors for Toyota Corolla Prius Matrix Vibe Lexus CT200h [10.20" inch Rotors] - amzn.to/3vAZKQY.
Watch Installation of OEM Style 12" Digital Mirror (Mirror Dash Cam) in 2020 Toyota Corolla - ruclips.net/video/fICdPfLPCGk/видео.html.
It’s so great to find someone that actually is direct and explains in simple words and shows how it’s done completely. Thank you so much 🙏🏻✌🏻👍🏻👍🏻👍🏻
No problem! Thank you for the feedback.
-Push Start 2 times
-Break press and hold
-Pull epb up 3 times
-Push epb down 3 times
-Release break
-Push down epb till the epb stops unwinding
Thank you so much! You just saved me from tearing apart the caliper to do the reset manually
Don't forget after the electronic unwind but will not pull all the way in you have to use the clamp to squeeze the piston in all the way.
WTF! Am I trying to work on my car or get unlimited ammo in GTA? Many thanks for taking the time to document this procedure. It helped a lot!
I love u for this 😂😂😂💀
That's hilarious! The first thing that came to my mind was the infamous Contra code.
I messed up and did service mode when the calipers were off. Dash says break system failure and caliper pistons are released. Any thoughts on how to fix?
Same thing happened to me, but I was able to fix it with a scan tool, reset the epb with it and bleed the caliper, that did it
great video .straight to the point well done
Thank you so much very helpful
If youre recieving fault code Parking brake malfunction....easy dont panic...just clear codes with obd2 scanner first and then try to reingage parking break . It should work. If not check wire connectors and fluid levels. Try again but its very important to clear all codes first!!
My code won’t go away
Wow great video. Thanks for taking the time to publish. Great service
Excellent video! Saved me hundreds of dollars!
Thank you
Thanks from a new toyota tech!
Excellent video, thanks for your valuable help! I'm almost a technician now.
Help a lot.
Thank you 🙏
I was running late to work and found your video because my car wouldn’t let me drive due to brakes being engaged and because of your video realized I could pull the button towards me ! Been sitting here for 25 minutes … thank youuuu
No problem! You can enable the automatic mode for your parking brake. The parking brake will turn off automatically when you park the car. This video explains the process: Toyota Corolla (2019-2024): Electric Parking Brake Activation/Deactivation in Manual And Auto Modes - ruclips.net/video/oSrHbdyzQTE/видео.html.
That's an easy fix. It's becaus3 the release interlock feature got disabled turned off. Simply press and hold switch up for a few seconds
Спасибо, очень помог мне👌
Привет из Германии✌️✌️✌️
Спасибо Людям кто такие вроде бы неважные вещи снимают, но ети вещи реално спосают❤️
Thank you very much for this informative video sir.
Added note. You can enable/disable the automatic shifter brake interlock by pressing and holding the switch for 5sec. Up to enable, down to disable. If you come out of park and it doesn't release, put back in park and hold switch up.
Yes, you can! We have video about this as well: Toyota Corolla (2019-2024): Electric Parking Brake Activation/Deactivation in Manual And Auto Modes - ruclips.net/video/oSrHbdyzQTE/видео.html.
Thank you so much for this comment !!!
Mine won't go back at all its stuck blinking park
Thanks
Thank you so much for this video =)
Crazy prises here in Norway for a simple job, changing brakes..
Appreciate you man!
Hi, good and helpful video. After turning on the service mode, we only press the brake pistons in the caliper or do I have to turn them and press them as in VW?
Thanks! You need to press them. Here is how we did this operation in the RAV4 - ruclips.net/video/UoitnfFsPZY/видео.html. In the RAV4 video we did not use the rear brake service mode, instead we manually released the EPB actuator using the battery.
@@MorozovAutomotive Thank you very much for your answer. I used your tip from the movie and turned on the service mode, then pressed the brake pistons and turned it off after assembly. Corolla has new brake discs and pads, and everything works fine. Thanks and regards.
I took off my caliper trying to do it the old way caliper wont go back on i did this process now its saying parking brake unavailable and wont let me take it out of this service mode
Same here
Did you figure this problem out?
@tpktalks2508 yes. The brakes are not like old brakes. They must be done through the electronic parking brake. I had to bring it into the dealer and get the code removed it cost me $80
@@tpktalks2508 .
Thanks a lot, bro! that really helps. For 2020 Corolla LE same procedure works great!
Perfect. It helped a lot. Thank you.
Thank you, this helped when serving my 2020 Corolla brakes.
Perfect thank you!
do you leave the ignition on while you service the brakes in service mode?
No, you can turn the car off, do your work, turn the car on and disable the service mode.
Thank u for your wonderful explanation sir thank again
Thank you so much sir
👍🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹👍
You're grate person
Thanks . ❤
Thank you bossman really helped a lot
буду пробовать на лексусе RX-350 2017 года
Thanks 😊
👍
Nice and easy. Thanks 👍🏼
Thanks for this mannn help us a lot
Excellent👍🏽
Thank you for not making things seem complicated by explaining so well and to the point. Great video
Explanation is simple and to the point. It worked fine for me.
Thanks man, helped me a lot 💪🏼
Now i’m really glad i bought a L no electric bs parking brake .I have a manual ebrake
Lucky you!
I have a p a off orange light on. A 2021 corolla hatch xse. I did the rest but light is still on.😢
Thanks for your help.
❤❤❤❤❤ thanks man
Hi, @MorozovAutomotive i tried doing it like this but i did them wrong anyway i replace the pads and got the pistons of the caliper out of the caliper and put them back on manually now i got a message on dash board parking brake malfunction how can i get rid of that without using a ABS SCANNER to delete it?
The message needs to be reset by using the professional scanner. You can try to reset it at the dealership. You can also try this option: Mini Vci J2534 Cable Standard Obd2 Communication Interface for TIS Techstream V17 V18 Toyota Lexus Scion OBD2 Scanner Diagnostic USB Vehicle Scan Tool - amzn.to/4fuu8Pb.
What do you recommend, keep the parking brake activated and engaged or turn it off and deactivate it ?
Just be careful! I have tried to change the rear pads. All good to the point I had to reset the breaks in the original position.
First time changing on corolla, it took me some time to finish. The car somehow went in standby and I have pressed the start button to activate the dashboard. I have tried to pull the button but it keeps saying there is something faulty on the break system, obviously because of the pistons not being set to the 0 point. I have disconnected the battery hopping it's going reset the system but worse, right now the car don't even recognise even the key.
Boot locked as well.
You need to be quick enough to change the pads and have time to reset the breaks.
As update :the dash board being on drain out the battery.
The computer lost the sequence of the commands. I had to put the jump leads to give electricity and had to cancel the error with a diagnosis tool.
If you use this method just be careful to have and external source of electricity until you finish the job.
Thank u very much
This isn't working but i already have the tire off and lifted maybe i dont know why that would matter, well see
Well explained. Thank you
goat thank you
Thanks Brother!
Thx😊
This work on a 2019 also?
Great video……how about the front breaks.
Do you need ignition on to release?
Yes, you need to put the car into ignition on position in order to enable the rear brake service mode.
EPB says deactivated but I still can’t decompress the piston back in anyone know why
Deactivating the parking brake is not enough for rear brake pads replacement. You need to enable the rear brake service mode. In this case the parking brake motor unwinds all the way back allowing you to compress the piston. The process is described in this video.
Does this release all four or just the rear?
Just the rear.
First you have to deactive the parking brake by holding the parking brake button down then holding the brake pedal down
Братан лучше бы ты на Русском это все рассказал
На русском есть аналогичное видео с Тойотой РАВ4: Тойота РАВ4 (2019-2024): Как Включить Режим Обслуживания Задних Тормозов? - ruclips.net/video/DAYF4R-yyUY/видео.html.
Также, Вы можете перевести английские субтитры на русский язык в настройках к видео.
I got a bit lost
Merci 👍
And we have to do this to change our breaks?*
Yes, if you want to replace rear pads or rotors.
After performing this work around will i still have to compress the caliper with a C-clamp to install new pads thank- you
Yes, you still need to do this. You should be able to do this with simply pushing it in with your hands. Here is another way to do this if you don't enable the rear brake service mode (if you don't release the epb actuator) - ruclips.net/video/UoitnfFsPZY/видео.html.
So what about the calibration after replacing pads and rotor or it will adjust itself ?
After you have replaced your brakes and reinstalled everything back, you need to deactivate the service mode. There is no need to calibrate anything.
Does anyone here have a fix if the caliper over extends from taking the caliper off?
Mine did too did you ever figure this out.
What about just turning the car off in neutral, I’m going to change my rears like that
You still need to enable the service mode. It will unwind the parking brake motor all the way back, allowing you install new brake pads.
Ok I do it but when I move from Park to Mitchell or reward or orgy when I go to park not not move to auto parking
Does this work on uk version of my 2022 toyota corolla touring sports hybrid?
After doing all this. I can't seem to pit piston back in to install rear rotors. Now it says brake malfunction I can't install calipers back... any help?
I’m also in the same boat any update?
@@ThatsWulfyany updates on this?
2019 CHR brake piston has popped out. Help?
Can you power down the vehicle to work on the rear brakes after putting into service mode or does the car need to be left on?
Yes, you can turn it off after enabling the service mode. After you finish working on the brakes, turn the vehicle back on and disable the service mode.
@@MorozovAutomotive Thank you so much 👍
Is that for all Toyotas with epb or just Corolla?
This procedure applies to all Toyotas with electric parking brakes.
Still it says not ready to drive on your dashboard?
It just lets you know that you need to start the car in order to start driving (press brake pedal and press the engine start button). It is still in the Ignition ON mode.
Wonder that we need to learn cheat codes now to work on brakes thank-you very much for making this video
Can you show me how to working rears break pad on 2018 Toyota Camry
Hey so before the service mode, when I put the car in drive it would disengage the rear brakes automatically and when I would put it in park it would engage the rears brakes. Now it doesn’t do it.. any tips?
You may have disabled the the automatic parking brake mode. In this video we showed how to enable and disable the automatic parking brake mode: Toyota Corolla (2019-2023): Electric Parking Brake Activation/Deactivation in Manual And Auto Modes - ruclips.net/video/oSrHbdyzQTE/видео.html.
it is only for corolla! i have 2018 xse camry!! ?
You can try this sequence in the Camry. It might work. But sometimes there are slight variations in the procedure depending on the model.
Do you know if there is difference between pads of sedan and hatchback? Also is the rear pads different if you have manual or electronic? Hard to find rear brake pads since it doesn't say if its for electronic or manual parking brake.
I lik you VDO
So how do you work on Toyota Camry 2018
Do you leave the car in accessory mode when replacing the pads? Or can you turn the ignition off then proceed with the pad replacement
You can turn the vehicle off. Do your pads replacement. Then deactivate the service mode.
Why does my 2020 Toyota Corolla not
Do this?
Задние колодки разведутся? Чтобы их заменить
Данная процедура активирует сервисный режим для задних тормозов с электронным ручником. Это позволит вдавить поршень цилиндра для замены задних колодок.
Got a question for you. Loving ur contents by the way. I have a manual corolla hatch witch I am thinking of autocrossing and start rallying and would like to disable all the safety assistants just for the fun of it. I know by holding the tc button I am able to diactivate the tc and the front collision assistants. Im not exactly sure if it deactivates the esc let me know if you know but I want to deactivate the esc, abs and the hill hold assistance. Would removing the abs fuse work without disrupting the brake balance? Thanks in advance.
Pretty easy yes it does deactivate the esp if you hold it!
Not the abs though,
Just take the abs fuse out and it takes them all off traction abs esp
Do you know if you can do this same trick with the manual version of the car?
I have a 2020 Toyota Corolla SE and I’m planing to change all the breaks do I need to do those steps before I change the rear brakes?
Yes, you do. Otherwise, you won't be able to push the caliper piston in.
@@MorozovAutomotiveThanks for letting me know!I appreciate it.💯
how to change the electronic rear brake fluid ? can you explan it?
Hi, here is how we did the brake fluid change in the RAV4 - ruclips.net/video/VkCP1YWuQVQ/видео.html.
Had to lock doors for it to work
This worked also for 2020 Rav4 w/ push to start. I started the procedure with vehicle off and parking brake in released position.
Thank you for this help.
Здравствуйте, у меня Toyota Corolla Hybrid 2019 года выпуска, и у меня не получается, помоги пожалуйста 🙏, спасибо заранее!
Здравствуйте, попробуйте выолнить ту же процедуру, но без нажатия педали тормоза. ruclips.net/video/AJW9HjK6uP8/видео.html
@@MorozovAutomotive спасибо всё получилось 🤜🤛👍
Thank you very much!!I couldn’t understand the difference between the service mode and simply turning off the automatic e brake feature but you explained it beautifully in the last paragraph.If you were going away on a trip and stored your car in the garage,how long would you leave a car with the e parking brake applied before it became a problem like seizing on or something else?
Привет, можно тоже самое сказать по русский?
Здравствуйте, на русском есть видео для РАВ4: Тойота РАВ4 (2019-2022): Как Включить Режим Обслуживания Задних Тормозов - ruclips.net/video/DAYF4R-yyUY/видео.html. Также, можно перевести субтитры к видео на русский язык в настройках видео плеера.
Brakes are over rated !