Looking awesome in that Acid green. I thought mine in Red with white lines and wheels was looking good,but this is much better. Nice in your face color it is Oni💯👍
lol I was gonna say the opposite,would drive me nuts..but as I live near a rail station and everyone says they could never sleep near that noise,I and assume you are the same,it is so normal I really don’t hear it anymore. Amazing job! Clean clean work. And it is done so pretty much anyone can do this without having to buy tons of extra stuff. I subscribed looking forward to more.
Thanks you very much! Actualy I can not avoid the dust problem too, even working in a closed room. So I have to sand it off when the paint already dry to fixed it.
I realy enjoy watching you build these models. Real I indepth. I was curious to know , would you get a better , smother finish if you were to wet sand. I do agree that they come out awesome as is
Actualy I did paint sanding and polishing in every build but behind the camera to keep the video from being too long. But I will add it in the next video. Thanks for your suggestion.
hello everything is fine? I would really like to know what kind of brush or pen was used to remove the excess wash, please. congratulations for the magnificent work. Nilton, from Brazil. Bye!!
It’s call “panel line eraser” and here is the link www.amazon.com/Notes-G-Good-Finish-Master-G-06r/dp/B06X8YMDKP Hope it can help and thanks for your watching!
Hi bro, top level as always! Tell me why you use two primers? I have a big project planned and want to try SNP products, but there is little information about their primer.Thanks!
Thanks bro! For the primer, Grey to check how smooth of body surface and white for brighten the Acid Green paint in above layer. If you paint Acid Green on grey primer it will look a bit dull.
Very zen video, I enjoyed the silence and just the background sounds. I noticed you had 14psi set for priming and painting, but for the 2k clear you had set 25psi. Any reason for that? Does it give a smoother finish to the clear coat?
Hi, beautiful model! Is this your first time using 2K SNP? Compared to Glasurit can you tell me how you find it? Do you apply it with a light coat and then a wet one or directly a wet one? And it seems like you paint so well that you don't have to sand and polish, right? Thanks.
I just try SNP 2K Clear coat for the first time. It’s has a different mixing ratio (4:1) and it seem not to thick as Glasurit so easier to paint with airbrush. It has a high gloss finished but slightly less shine than Glasurit. Another nice thing is that it has a clear layer that isn't too thick. Makes the details of the model still sharp.
I bought the 2K SNP, but they sold me one with a 2:1 ratio and they told me that it must also be diluted with Tamiya thinner. You said the ratio is 4:1, so they have different types of 2K. But do you add thinner? @@OMGscaleworks
He highlighted all the faint molding lines. They are difficult to see (until they're painted!!) and remember where they are located. When the black is sanded away so is the mold line.
This Acid Green is the new product from www.mangapromix.com/ It may not yet appear on the website. But I think you can send a DM to the moderator if you want it. You can also DM to them in facebook page facebook.com/mangagarage?mibextid=LQQJ4d
Another incredible build and incredibly informative video! I wasn't real interested in this kit, but seeing you build it makes me reconsider.
Glad you enjoyed it! This kit is good enough to try, you can trust me!
I totally dig how all the new models, cars, and WWII stuff have window masking for painting.
Looking awesome in that Acid green. I thought mine in Red with white lines and wheels was looking good,but this is much better. Nice in your face color it is Oni💯👍
Thank you so much! ^^
Now that's a bold color choice. Very nice. Thanks for sharing your exceptional talents.
Thank you very much!
lol I was gonna say the opposite,would drive me nuts..but as I live near a rail station and everyone says they could never sleep near that noise,I and assume you are the same,it is so normal I really don’t hear it anymore. Amazing job! Clean clean work. And it is done so pretty much anyone can do this without having to buy tons of extra stuff. I subscribed looking forward to more.
Beautiful build
Thank you so much mate!
Looks good, nice job
Thank you! Cheers!
Fantastic work. Enjoy watching your videos!
Thank you for your visiting too!
nice... I mean awesome... and great build video, luv the color for this model 😊
Thanks a lot mate!
I love ASMR. You can turn the sound off, knowing you didn't miss anything.
Fantastic work. I'm so amazed at the fit up of tamiya kits. I wish they did muscle cars. Revelle and amt just don't hold a candle fit wise.
Yes, I think so. Glad you like it and thanks for your watching.
Absolutely amazing. My only problem with your videos is how afraid I am of ruining my models when attempting something similar
You can do it!
Wow, great job. The clear coat is flawless. How do you maintain such a dust free environment?
Thanks you very much! Actualy I can not avoid the dust problem too, even working in a closed room. So I have to sand it off when the paint already dry to fixed it.
Amazing job! Thanks for sharing
Thanks for visiting too mate.
very nice project, amazing !!!
Thanks a lot!
nice build
Thanks!
This car is more put together than my life 😭.
สวยงามตามท้องเรื่อง 🥰🥰🥰🥰🥰
รักแปะ!
Looks cool 👍
Thanks 👍
Awesome work like always my friend, fantastic colour choices and really clean work. Super well done 👍🏼👍🏼
Thank you so much my friend 😀
Looks amazing thank you for sharing 🙂
My pleasure 😊
I realy enjoy watching you build these models. Real I indepth. I was curious to know , would you get a better , smother finish if you were to wet sand. I do agree that they come out awesome as is
Actualy I did paint sanding and polishing in every build but behind the camera to keep the video from being too long. But I will add it in the next video. Thanks for your suggestion.
Awesome
Thanks!
ขอบคุณที่สร้างผลงานดีๆ สวยๆ ออกมาครับพี่ ติดตามเสมอครับ
ขอบคุณมากๆสำหรับการติดตามเช่นกันนะคร้าบ
Incredible build and great tips. What do you use for clear coat, and do you sand it?
Thanks a lot! I used 2K clear coat from www.mangapromix.com/ and yes, I did a wet-sanding then compound and polishing.
hello everything is fine? I would really like to know what kind of brush or pen was used to remove the excess wash, please. congratulations for the magnificent work. Nilton, from Brazil. Bye!!
It’s call “panel line eraser” and here is the link
www.amazon.com/Notes-G-Good-Finish-Master-G-06r/dp/B06X8YMDKP
Hope it can help and thanks for your watching!
Hi bro, top level as always! Tell me why you use two primers? I have a big project planned and want to try SNP products, but there is little information about their primer.Thanks!
Thanks bro! For the primer, Grey to check how smooth of body surface and white for brighten the Acid Green paint in above layer. If you paint Acid Green on grey primer it will look a bit dull.
Very zen video, I enjoyed the silence and just the background sounds. I noticed you had 14psi set for priming and painting, but for the 2k clear you had set 25psi. Any reason for that? Does it give a smoother finish to the clear coat?
2K clear coat I used is a bit thick so I have to used 25psi. Glad you like my video and thanks for your visiting.
Always a pleasure to watch your work. Would you please say what type of tool you are usiing to remove the excess panel line enhancer.
Thanks a lot! It’s panel line eraser stick
www.aliexpress.com/item/3256805714066251.html
Parabéns, você deveria mostrar como você faz o polimento final da pintura da carroceria
I’ll add it in the next video. Thanks for your suggestion my friend.
Love background noise crickets made it perfect, actually.
Glad you like it! In my video there are 2 background sound. Birds in day time and crickets in night time. ha ha
Why the 2 different types of primer? Great build aswell 🔥
Gray for surface checking and the white for brighten the Acid green above. Thanks for your watching!
40:45 what colour was used on that part? Looks like a real thing.
It’s just fine silver paint from SNP Color I got it from www.mangapromix.com
Hi, beautiful model! Is this your first time using 2K SNP? Compared to Glasurit can you tell me how you find it? Do you apply it with a light coat and then a wet one or directly a wet one? And it seems like you paint so well that you don't have to sand and polish, right?
Thanks.
I just try SNP 2K Clear coat for the first time. It’s has a different mixing ratio (4:1) and it seem not to thick as Glasurit so easier to paint with airbrush. It has a high gloss finished but slightly less shine than Glasurit. Another nice thing is that it has a clear layer that isn't too thick. Makes the details of the model still sharp.
@@OMGscaleworksOh good then! But do you first apply a lighter coat and then one or more wet ones, waiting 10 minutes?
Thanks!
I bought the 2K SNP, but they sold me one with a 2:1 ratio and they told me that it must also be diluted with Tamiya thinner. You said the ratio is 4:1, so they have different types of 2K. But do you add thinner?
@@OMGscaleworks
ว้าว😮
Very nice car Ford GT. Ford vs Ferrari. I have of my own
Another amazing build but I was wondering why do you use a sharpie then rub it off?
He highlighted all the faint molding lines. They are difficult
to see (until they're painted!!) and remember where they are located. When the black is sanded away so is the mold line.
Thanks for your answer!
Fantastic! What is in the bottle with label X20?
Thanks! It’s Tamiya enamel thinner X-20
nice:) need to find one to film in a larger scale... like 1:1 :)
Glad you like it!
Magnifique 👍👍👍!!!!
Thanks!
สวยมากค่ะ🎉🎉🎉😊😊😊
ตัดต่อสุดยอดมากค่ะ ^^
❤❤❤❤❤❤
Just started watching. I hope he goes for Sebring livery
I could not find that paint. Where is it?
This Acid Green is the new product from www.mangapromix.com/ It may not yet appear on the website. But I think you can send a DM to the moderator if you want it. You can also DM to them in facebook page facebook.com/mangagarage?mibextid=LQQJ4d
Not sure if the 2nd gen GT was offered in Acid Green. If it wasn't, it should have been!
If it wasn’t, Maybe I’ll do it myself 😉
What is that tool that you are using to apply the glue??
It’s sculpting ball head tool.
Incrível!
Thanks!
สวยงามครับบบบ
ขอบคุณมากครับ
Hi! Previously you used pressure 25 psi and now you used pressure 14 psi. Why? Thx
Now weather in my place is more dry so I had to reduce the pressure and add more thinner. To make the paint dry a little more slowly.
👏👏👏👏
The build and the model...excellent! The background noise (crickets and birds), became annoying.
Sorry about that but thanks a lot for watching!
0:32 I scanned the QR code and followed all the instructions and I would’ve gotten a free hat but they don’t ship to Australia. Oh, well.
I think Tamiya model kit are not realy hard to find, maybe you try to check out at hobby store in your area.
What name of the paint, please tell
It’s “Porsche Acid Green” paint code : 2M8
พ่นสีมือไม่เลอะเลย ผมนี่ซอกเล็บดำหมดแล้ว 😂
ถ้าจะไม่ให้เลอะเทอะ ต้องใส่ถุงครับ 😂
Why do these guys always have some annoying bird or bug screaming in the background
Sorry ‘bout that. My workbench place next to the backyard and there are a lot of trees in there.
@@OMGscaleworks that one bug in the beginning was trying to steal your glory. Nice build
No open doors. No super detailing.... what a fail.
Sorry about that.
@@OMGscaleworksI think he meant the kit is a fail, not your build. You did the best you can do with the kit
@@aidenharker5139 Thanks 😊
Great build but those seats and interior are bland and boring.
Jazz it up !