When I’m doing clear I will hit the edges first and then start on one side and continuously spray one direction because if it is already starting to dry you won’t have a dry spot on the overlap in the middle.
i generally only hit edges with the first coat, but especially with hoods i think it’s important to start and one side and go to the other definitely 🤟
Недождался ссылки на магазин торгующий подсветкой краскораспылителя. Купил китайский. Ответственность за этот мой отчаянный шаг, лежит на авторе роликов.😊
I know nothing about painting but if I would have shot that, there'd be nothing but hangers and orange peel. That's a lot of product 😅. Beautiful work 👏🏻
Aye, we all start somewhere, when I started learning I would get nothing but runs all day, sometimes I even miss some spots, we learn from our mistakes and that’s how we get better. Every paint job is a learning experience so don’t feel down when it doesn’t come out the way you want it too, pick up that gun and do it again because at the end of the day it’s just paint 👍🏽👍🏽
Spray clears at 69-72f when possible. Use a slower activator if possible, both tips help to release solvents for a high gloss finish. Check Bake temp and Ramp time. Having a bake that heats up to quickly is not good. If so allow the clear to flash slightly longer so you don’t trap solvent. Trapped solvent creates die back.
Don't remember hearing anyone ask for your opinion of what he should be doing. This works for him your process works for you. Give compliments occasionally stop criticizing. Any nice people left? Good job, looks good
В этот раз руку держит как робот намсборочной линии шкода октавия А7, а бывает по краям кисть заламывает и в итоге длина факела увеличивается, непрокрас
When I’m doing clear I will hit the edges first and then start on one side and continuously spray one direction because if it is already starting to dry you won’t have a dry spot on the overlap in the middle.
i generally only hit edges with the first coat, but especially with hoods i think it’s important to start and one side and go to the other definitely 🤟
Realmente é uma terapia tudo isso ☺️❤
That steady hand. 😊
Beautiful
What is the purpose of the light ?
Hammer that clear on!!!! 👍🏻
Loved it ..❤❤❤
i give you ⭐️⭐️⭐️⭐️⭐️
Мой любимый работа уважаю каждый мастер
Awesome! What’s wait time before applying clear? Or was it wet sanded after drying?!
Não se começa uma pintura pelo meio da peça...
... you're pro, guy.. 🤗👍
What gun are you using?
That clear lays down nicely
😂 Number One👍👍👍👍👍🔝🔝🔝🔝🔝🔝🔝🔝🔝🔝🔝😎
Super😮
Недождался ссылки на магазин торгующий подсветкой краскораспылителя. Купил китайский. Ответственность за этот мой отчаянный шаг, лежит на авторе роликов.😊
satisfying
Como se llama ese tono de color ??
Im a painter as well you should try starting on the outside and working ur way in keeps a nice wet edge especially on bigger panels.
Great work
Q presión de aire aplica gracias
Im a start from the side guy myself. Any reason you start from the middle? I may try this
If you start in the middle and work your way out, there is less chance you will accidently bump wet paint. The wet is always at arms length away.
@@timwelch175 will try today!
How many coats of clear is recommend?
👏👏👏👏
That a PT Cruiser hood?
How many psi are you set at and how many Mm is the nozzle tip
Cho mình xin hỏi tên súng phun sơn, và muốn mua nó thì mua ở đâu vậy
Thanks bạn nhiều
I'd like to know the model name of the spray gun
건 렌턴 뭔가요?
Topizera🤙🤙🤙
What’s the light on the gun for are the lights in the booth so bad absolutely hilarious I have never seen any one using one of these 😂
Learn something new every day
1 coat goat!
I know nothing about painting but if I would have shot that, there'd be nothing but hangers and orange peel. That's a lot of product 😅. Beautiful work 👏🏻
Aye, we all start somewhere, when I started learning I would get nothing but runs all day, sometimes I even miss some spots, we learn from our mistakes and that’s how we get better. Every paint job is a learning experience so don’t feel down when it doesn’t come out the way you want it too, pick up that gun and do it again because at the end of the day it’s just paint 👍🏽👍🏽
Now I'm thinking to paint than wrap
Nice sepraygan
Link in bio
از پمپ باد فیلم بفرستید.
فشار عالی و خوب .کیفیت عالی میده
Pelez gan name shop I want porches cost
For what car is that hood for
Who cares?
Now apply clear coat good
الدقة العالية في العمل
Spray clears at 69-72f when possible. Use a slower activator if possible, both tips help to release solvents for a high gloss finish.
Check Bake temp and Ramp time.
Having a bake that heats up to quickly is not good. If so allow the clear to flash slightly longer so you don’t trap solvent.
Trapped solvent creates die back.
Don't remember hearing anyone ask for your opinion of what he should be doing. This works for him your process works for you. Give compliments occasionally stop criticizing. Any nice people left? Good job, looks good
Yeah you told him right he should put his work out for people to see
Agreed
For perfect clear, heat the paint to manufactures specs which can be obtained from the suplier. And dont use flame heat. Get a hot plate.
А почему от середины детали?
У каждого своя манера покраски?
Видимо только таким цветом может красить ! Остальными с косяками
В этот раз руку держит как робот намсборочной линии шкода октавия А7, а бывает по краям кисть заламывает и в итоге длина факела увеличивается, непрокрас
Very good rezald
That color would nice in matte
Ya plein de manque de vernis là
Recommence svp
Cost us dollar
Il es Débutant
big toilet lid
That is wayyyyy too much overlap
Еееёееее
Uhs
First 3 passes were slow as hell bro 😂
I make pizzas for a living and I can say you did that absolutely all wrong.
Try again.
Ta lampe ne sert à rien il faud une ligne de carence pas un point lumineux
You have a few dry spots bud
1.3 или 1.4?