HOMEMADE DOOR ALIGNMENT TOOL👍👍 How To Make Easy Scrap DIY Repair For Truck Alignment Fabricating
HTML-код
- Опубликовано: 13 сен 2023
- I have made this tool from scraps to use for aligning doors. The door latches on the striker of the tool and can be used to bend the door up or down as needed. 
HOMEMADE DOOR ALIGNMENT TOOL👍👍 How To Make Easy DIY Repair For Truck Alignment Fabricating Tools
Amazon Affiliate Link: amzn.to/3S1Cfs9
Using this link may lead to a commission at no additional cost to you HELPING THIS CHANNEL OUT
ALSO FIND ME ON
→Facebook: Bondo Billy's Paint & Body
→TikTok: @userbondo_billy
→Instagram: /
→Contact: (Business Only) oldscool6260@gmail.com
#repair #homemade #howto 
Авто/Мото
Cool tool 👍
Nice work Billy. Had to fight a few doors into shape. One of those tools are well handy. Pro bob. 👍👍🛠️🛠️🛠️
Yes! I don't know if you have one already. But a series or playlist on home made tools would be awesome! Some of my best tools are home made.
It is always cool to see how different techs have their homemade tools for a job. You can get 10 different techs together and they'll have 10 different ways / tools for the job. I know I have my fare share of homemade mechanic tools and body tools.
That's a cool tool...BB...!!!👍
There was a time when every time I stayed in a hotel...I would take the big phone book...these made very good "door adjusters"...kinda had to place it just right ...and bounce it s bit....but it always worked...!!!
👍👍👍✔️👀😁
I’m into fitness…….
Fitness this door properly 😂
🤷🏻♂️
👕
Genius👍
Very industrious Billy.
If there is a will, there is a way.
Hey Ed, that’s also my pipe anvil metal bender as the handle😉😉
That's extra fancy. I usually use a floor jack and a block of wood for that.
Awesome tool. Thanks for sharing. Keep the content coming. Hope you have an incredible day. Much love and RESPECT
Cool tool!!
Love your channel. But let's hope the hinges are good and bushings etc. Then just put a 2x4 under the door and jack. Done.
Bondo Billy’s gentle persuasion class now in session! 👍
MrB....I've got to send you a bumper sticker that says....
" IF IT JAMBS....FORCE IT !
IF IT BREAKS IT NEEDED REPLACED ANYWAYS!"
Having said all this I've used 2x4's , actual door alignment tool bars, prybars,and literally any object that would fit and help for alignments.
It's never a shame to build something better to get the job done in a timely manner As long as the goal is achieved. That's why when you about to do a unappreciated Maneuver you yell out....LOOK THERE'S ELVIS!!!
LOVE YA BROTHER❤️👍🙏🙏
Now that is ingenious 🏁🏁
YesWelder theater 75
@@OldBondoBilly
Butt
12345
Gotta try that on my door someday!
Excellent work. I'm gonna build one!
Thanks BB!
✌️😎🍩
When I get it exactly the way I want it then I’ll make a new, neater one with dimensions, etc.😉😉
@@OldBondoBilly
That will be much appreciated!
Phillip Hall
Cool tool 👍 👍
👍
Good one Billy! I like that door aligner!
Phillip Hall
Dad always put a 2x4 and warp it in to place always worked
👍🏻👍🏻 However for one off scenarios (the old way): open the door slightly & lift from bottom rear (door) corner to raise, then shut the door with a wood block located between door & opening at low sections. The door can also be pulled down (grab top of door frame & pull down): these are for minor adjustments... otherwise adjust the hinges.
The tool is for those who are doing this work more frequently.
Thanks for sharing Billy!👍🏻👍🏻🙂❤🖖🏻
This one has the injeenyus weld-on hinges🙄🙄
@@OldBondoBilly I only contemplated that some may be bound by "thinking" they would have to buy/ build this tool: may act as a barrier.
Disregarding that, Everyone knows: "He who dies with the most tools Win!!".
You are doing a great job young William! (in some cases Billy derives from William... though I expect you were named Billy)👍🏻👍🏻🙂🖖🏻
My name is Ken. Bondo Billy is my persona😉😉
@@OldBondoBilly 👍🏻👍🏻❤🖖🏻
@@OldBondoBilly I hope all your family is doing well... especially your son! (awkward failure to write his name & hope you do not notice🤨)🖖🏻
Thanks for making this vid BB! I got a good look at it and should be able to whip one up real quick like…
Shouldnt you have made all these adjustments before you did the bodywork?
I didn’t do the bodywork
I gotta make me one for my stang!
Go-go-go Bondo Billy 🤣
TROLLLLLLLL. Did you try to adjust it from the very genius GM hinges?? Maybe if talk to the car nicely 😅
Yup, weld on hinges. Real GM jeenyus
@@OldBondoBilly why don't you drill out the welds & replace it with bolts like the replacement hinges? DRINK BUD LIGHT 🍻
Yepper, tell them why doors sag ,i use to use a 2x4 ,sn a small one under the door ,so not to bend the edge bottom,,, luvit man ,,gooo billy,, DAMIT
Not first 😢
Shucks😉😉
How do you bondo repair a stepside bed?
Nothin to it the way bondo billy do it
If it is that easy to move to move the door on the truck, then how do you reinforce it after your done ? Because it looks like the first person to hang on the door when it is finished and back to the customer will just warp it again ? Or is that what we call job security !!!
Are you saying I’m weak and mechanical leverage isn’t a thing?🤣🤣
LOL just wanted to see if you were reading our remarks ! Thanks for always answering our questions you make us feel special !@@OldBondoBilly
That tool would have been 30% stronger had you used a flux core welder with gas
Is that an ekspurt opinyun?🤣🤣🤣
@@OldBondoBilly I know a thing or two about tools. I live amongst them.
Take the striker off the pillar first then play games
The striker is the pivot point🙄🙄