Theory, reasons, and practicality! Absolutely wonderful, I will be an engineer in no time, thank you sir! Also, I love the speed and calmness of your presentation; for me it is perfect. In fact, I think I'm in love with you; strictly engineeringly speaking, of course. That's not to say you are not a stylish, handsome, man with a soul soothing accent! Please keep up the great work!
Radhe radhe , Sir, the way you explained this topic, is so so amazing, please make videos more on Mechanical engineering topics, you will definitely help many students in life sir, your video is one of the best videos i have ever seen in whole yt ,
Very good information, I have one question regarding this what if we required 90 deg. Transmission and good positional accuracy also, can I go for bevel-gear box with servo motor?
Thank You so much! for sharing this type of knowledge. It's amazing. I go through your channel and your content is amazing. I appreciate your efforts. I have shared your channel in my company too.
can you give me an idea or reference in what kind of gear should I use on a boat .specifically a marine diesel engine has high torque to produce a a high speed dual propeller ? thanks brother
hello sir, can you help me what to select gearbox for potato harvester which needed to connect in ISEKI TS1610 4wheel tractor. I want to assemble a machine I’m from philippines. No potato harvester is available
Thanks for your teachings. Can We get an Inline Helical or Planetary Gearbox with a Driving Speed of 30RPM to elevate to 900RPM as the Output to meet 1500 Nm using a backup Servo Motor to control de speed of the overall operation?
As I understand, you want an inline helical or planetary gearbox that you will drive with a servo motor with a speed of 900 RPM? And desired output torque is 1500 Nm and speed is 30 RPM? Yes, surely we will find 1:30 ratio gearbox, but make sure the gearbox torque capacity should be more than 1500 Nm, which is quite rare,
Hello, I have one Question, How to decide the ratio of gear box for particular servo motor. Suppose if motor rpm is 3000 then how we decide that require rpm is. .......rpm So that i can select gear box .......ratio
Glad to hear that, Yes, I always avoid using fancy tranding english word, to make well understandable for everyone. also, I have seen we most of mechanical engineers are bad at english, moreover, I'm also bad at English pronunciation. it's hard for me to pronounce "nostalgia". But we have to move in right direction - Global English language and good communication skills. apart from most important core mechanical design skills
I am curious about the SEW motor size selection. They are given a Rated motor speed of 1455 rpm and an output speed of 323 rpm. I am curious about how they have achieved such high output speeds. On both sides, there is an AT10 32-timing pulley with an 8-meter horizontal travel with an AT10-toothed belt & the travelling time is 10 seconds. Can you please help me on this topic? Rated motor speed [1/min]: 1455 Output speed [1/min]: ?? Overall gear ratio : ?? Output torque Mamax [Nm]: ?? Thanks
Hi I want same calculations of pipe bending machine gearmotor capacity, I have 2 inch dia pipe and 5 mm thick bends as a cacular, I wand give force to pipe bends and gear motor drive pipe left and right
As I'm understanding, you want to bend the pipe in circular path and you want to calculate required gearmotor power, to push the pipe from sides in a guided circular path (made with ideal rollers, I gues), am i right ?
Interesting Idea, I'll think about it, How can I implement it. Maybe I can provide a kind of Google form in the video description. So needy people can go through questions. I'll try to put most questions in interviews.
Hi guys. Check this out: Worm gear reducer 40:1 + pre-reducer 3:1 + 1750RPM motor VS Worm gear reducer 80:1 + 1200RPM motor. Which one is more resistant and will have the longest life span? Thanks!
Hello! thank you for your video it was very helpful. I'm wondering what gearbox would be better for a carousel? a planetary or bevel one? for a design project, =) thanks!
Hi bro thank you for sharing knowledge, it's really useful .I requesting you to put video for basic engineering drawing. And how to study the drawing. Thank u once again
Theory, reasons, and practicality! Absolutely wonderful, I will be an engineer in no time, thank you sir!
Also, I love the speed and calmness of your presentation; for me it is perfect. In fact, I think I'm in love with you; strictly engineeringly speaking, of course. That's not to say you are not a stylish, handsome, man with a soul soothing accent! Please keep up the great work!
Omg. Thank you so much 😊😊 so glad
Radhe radhe , Sir, the way you explained this topic, is so so amazing, please make videos more on Mechanical engineering topics, you will definitely help many students in life sir, your video is one of the best videos i have ever seen in whole yt ,
Thank you so much 😊 Yes, alot of videos are coming
At 21:30 [ Gear ratio = selected motor speed / required speed of machine ]
Is what I think , kindly check .
Yes correct
At timestamp 8:47, did you mean Speed ratio is 1 : 10? Cause gear ratio seems to be 10:1
Exactly. If gear ratio is 1:10 then speed will be 15000rpm and torque will be 0.5Nm.
Gearbox
External
Internal
Spur
Helical
Becel
Worm
Spiral
Planetary
Worm
Helical
Gear ratio=driven gear/drving gear
Power=joule/sec
Power=torquexangular velocity
Gear box efficiency Torque losses considered
Backlash play between gears added inaccuracy
Gear box Max Torque capacity
Depends 1. gear material 2.strength 3.
Helical gear backlash 15 arc min
Worm gear box 1.selflocking screw movment
2.highest gear ratio in compat size by changing lead
3.need backlash compensation
Bevel gear box- 60-7 0 max gear ratio
Great work bhai sach Main aapki video ka mere jaise newly graduate vaalo ko bhoto help hota hai
My pleasure!!
Absolutely fantastic explanations!
Very good information, I have one question regarding this what if we required 90 deg. Transmission and good positional accuracy also, can I go for bevel-gear box with servo motor?
Yes, We can.
@@mastermechanicaldesign thanks 👍
Crystal clear explanation with animations. Good one and must watch by Engineering in power transmission industry
Thank you so much
Thank You so much! for sharing this type of knowledge. It's amazing.
I go through your channel and your content is amazing. I appreciate your efforts. I have shared your channel in my company too.
You're welcome! I'm glad it's being used in your company.
can you give me an idea or reference in what kind of gear should I use on a boat .specifically a marine diesel engine has high torque to produce a a high speed dual propeller ? thanks brother
I don't have any experience in marine. I guess worm gear.
hello sir, can you help me what to select gearbox for potato harvester which needed to connect in ISEKI TS1610 4wheel tractor. I want to assemble a machine I’m from philippines. No potato harvester is available
I guess we have already discussed on this
Thanks for your teachings. Can We get an Inline Helical or Planetary Gearbox with a Driving Speed of 30RPM to elevate to 900RPM as the Output to meet 1500 Nm using a backup Servo Motor to control de speed of the overall operation?
As I understand, you want an inline helical or planetary gearbox that you will drive with a servo motor with a speed of 900 RPM? And desired output torque is 1500 Nm and speed is 30 RPM? Yes, surely we will find 1:30 ratio gearbox, but make sure the gearbox torque capacity should be more than 1500 Nm, which is quite rare,
Very useful video for all the mechanical engineering guys...good luck keep it up
Thanks a ton
Hello,
I have one Question,
How to decide the ratio of gear box for particular servo motor.
Suppose if motor rpm is 3000 then how we decide that require rpm is. .......rpm
So that i can select gear box .......ratio
Checkout this point and further in this video 21:25 👍
Thanks a lot for well explained
My english is not good, but your choice of words is good to understand
Glad to hear that, Yes, I always avoid using fancy tranding english word, to make well understandable for everyone. also, I have seen we most of mechanical engineers are bad at english, moreover, I'm also bad at English pronunciation. it's hard for me to pronounce "nostalgia".
But we have to move in right direction - Global English language and good communication skills. apart from most important core mechanical design skills
I am curious about the SEW motor size selection. They are given a Rated motor speed of 1455 rpm and an output speed of 323 rpm. I am curious about how they have achieved such high output speeds. On both sides, there is an AT10 32-timing pulley with an 8-meter horizontal travel with an AT10-toothed belt & the travelling time is 10 seconds.
Can you please help me on this topic?
Rated motor speed [1/min]: 1455
Output speed [1/min]: ??
Overall gear ratio : ??
Output torque Mamax [Nm]: ??
Thanks
Could you provide gear motor model number, so i could look into datasheets.
@@mastermechanicaldesign
AC Gearmotor with helical-bevel gear unit
K19DRN90S4BE2/TF
Do you have any updates?
Hi I want same calculations of pipe bending machine gearmotor capacity,
I have 2 inch dia pipe and 5 mm thick bends as a cacular, I wand give force to pipe bends and gear motor drive pipe left and right
As I'm understanding, you want to bend the pipe in circular path and you want to calculate required gearmotor power, to push the pipe from sides in a guided circular path (made with ideal rollers, I gues), am i right ?
i am so thankful for your videos
bahut dukh hota hai ki ye sb kyu nhi seekha
Dukhi hone ki kya bat. Life m learning to chalti hi rehna hai. We are all still learning all the time .
Very informative, I have learned alot
I'm so glad 😊
Good instruction, easy to understand.
Make a video on Pneumatic cylinder selections for leak testing fixture.
100 percent Manivannak, Leak testing is my expertise.
Hi Mate, this is wonderful. Would appreciate if you can do a video on, vsd, vfd and vvfd drives
Hi pragathi Good suggestion! But for now I'm trying to cover mostly core mechanical engineering topics and design. So these topics may take time.
Please make video for LM rail selection bro...
ruclips.net/video/g4-fkMF68E0/видео.html
I gues this is what you asking for
@@mastermechanicaldesign thank you bro
Sir bearing selection process pe video banao
Bs aa hi gaya. thoda sa aur intazar bs ❤️
Bhaiya also give some assignments or questions for designing based on these lectures, And u can make another vedio on answering them.
Interesting Idea, I'll think about it, How can I implement it. Maybe I can provide a kind of Google form in the video description. So needy people can go through questions. I'll try to put most questions in interviews.
@@mastermechanicaldesign definitely it helps
Hi guys. Check this out: Worm gear reducer 40:1 + pre-reducer 3:1 + 1750RPM motor VS Worm gear reducer 80:1 + 1200RPM motor. Which one is more resistant and will have the longest life span? Thanks!
I guess using a single gearbox would make more sense, less power loss would be there
Hello! thank you for your video it was very helpful. I'm wondering what gearbox would be better for a carousel? a planetary or bevel one? for a design project, =) thanks!
You mean carousel ride, A Bevel one, I guess. planetary will be costly.
Very nicely explained. Thank you
Very good explanation, thank you so much sir....
WHAT AMAZING VIDEO AND CONTENT
Thank you so much Che Bismark 😊
I won't to make a drilling reg wat Kaine of gearbox do I need 🙏🙏🙏
I don't understand what you are asking
Very knowledgeable and understanding video
Thanks sir❤❤❤
Hi bro thank you for sharing knowledge, it's really useful .I requesting you to put video for basic engineering drawing. And how to study the drawing. Thank u once again
Sure Arjun 😊😊 Thank you so much brother
Brilliant!!
🔥🔥You simply are the best, thanks a million times❤🔥.
🙌
thanks
You welcome 🤗
Thanks
You Welcome
GOOD REPRESENTATION
Good luck 🤞🤞🤞
Thank you so much 😊
Thank U Sir 😊
You welcome
The self-lock WormGearBox is reversible, depending on the angle of the teeth!
Intresting. How much angle? Could you give me the gearbox model number
👍
👍👍
🙏🙏
🙏🙏
Gear ratio is 10 not 1:10. Please correct it.😊
Yes, gear ration is 10. it's same thing, but as gearbox is reducer gearbox, so we multiply motor speed by 1/10, (not 10) that's why 1:10
👏👏👏👏💯
😊😊
You have a great channel.... keep on going...... just learn and improve a bit on English vocabulary and accent
I will try my best 😊