One flaw I found on this V8 drill is that while drilling with the shaft facing down/upwards, the oil in the engine would go in a way that some bits of the engine would not get any oil. I would suggest installing a dry sump system so that every part of the engine will get the oil regardless of what angle the engine is facing.
Very good point. I'm also curious how the drive shaft of the engine takes thrust loads rather than axial loads. Most car crankshafts are not made to take a load in that direction. I would fit thrust bearings. Overall I'm thinking that a V8 powered flex shaft machine would make more sense. Then again if it's about making sense...
I was thinking the same thing too. Lmao 🤣. Great comment. You got to it before I did. & Three days before I saw this video. Regardless great comment! 😂
I always thought that I was a good vehicle mechanic,having worked on Cars, Motorcycles, HGVs,Heavy plant,Tanks. But your skills are next level. Unbelievable skill.
I’m a mechanic and every engine I ever saw has the oil pick up on the front end where the harmonic balancer is. Front end of the oil pan. So that’s not technically true. If you lean the drill forward there’s possibly enough oil to still be getting pumped since the oil pick up is probably up front.
I spoted a few problems. 1st is you are applying thrust pressure on the crank that it wasn't designed for, that engine will not live long. 2nd, the coolant taps are on the wrong end of reservoir. When you drill downward, the taps get no coolant. Fill the tank up more, or move taps. 3rd, good for high-speed stuff but with no reduction, power is going to be lacking in a big way
@@Guns_N_Gears I mean, it would have been a lot funnier if you said it which is why i gave you the opportunity to claim it but I guess I'll take credit for the joke 🤣
It's just for display and drills some holes so it works for its purpose with no problem. It needed a centrifugal clutch with a thrust bearing and a planetary gearbox on the front to make the output run to around 1000-3000rpm with WOT.
chuck mounted directly on crank? them bearings or bushings lasted max 5min of drilling. working any longer then that, if any, it'öö soon have grenaded itself from over heating since it couldnt get any coolent whilst drilling down-right.
Great vid. I would have shown how you changed the location of cooling tank feed port from the back to around the front side so that the engine still gets coolant when the drill is vertical. I was gonna comment that you should make that exact change, when in the last minute of the video I noticed that suddenly it had changed. Always good to show problem solving FWIW.
Always thought about how cool it would be to make such but with a .21 nitro RC car engine..... But this............ I really wanna see him test it, I'm sure its got endless potential! You know youre buddy's a gearhead but when he pulls out his V8 drill to work on his V8 car........ There's a poetry in that.
It's nice that you used the engine for a practical application - nearly all of the other videos on these micro engines just assemble them and run them, but don't put them to work.
That’s absolutely the worst thing you could do to an engine is to put it sideways or upside down. It’s supposed to remain flats when you put it upside down or different directions the oil will get into places it’s not supposed to go and it’s actually gonna damage the motor..
So funny how people can find something wrong with a one-of-a-kind thing. Like how they know it's supposed to last more than five minutes lmfao. This is by far the most American outside of the box shelf, shop talk kind of thing any mechanic or fab tech or shit I mean anyone really that does any type of work with their hands this is like a memorabilia type thing I would imagine but actually works to show off with once in a while obviously he you got other drills lol. Way impressive and hats off to ya most impressive indeed for sure. Keep on keeping on yo!!!!
It's LITERALLY, Tim Allan from "Home Improvement"! Seriously if you were in the show Tim would do his lil "HarHarHarHar" grunt when he's talking about giving a tool MORE power Haha. I absolutely Loooooove this!! Man i really wish my brain worked liks this. I mean dont get me wrong i am not incompitant. But I am not nearly as skilled with things of this nature still second guess some of my work. I am just now starting to learn how to use a tape measure properly. I was horrible with math growing up.
But again, I know you’re just doing this for video purposes and I’m not expecting this to be something perfect like a factory would do or an engineer would do. It’s nice to watch good work.
Awesome little project! It does amuse me, however, that so many people think its more powerful than a battery drill. This is a great analogy for an electric car. Need a battery to turn a motor to start the inefficient engine that is loud, cumbersome, & more finicky to build & maintain.
No more silent drilling at night, without anyone noticing! Never liked that secrecy anyways. ❤ They said, now iis the tme to switch your gasoline powered car to a fully electric vehicle, powered by rechargeable batteries. With thatt spare V8 motor collecting dust in your garage for too long, you now have finally restored balance in your part of the universe. You really did an awesome DIY job, by a real V8 gasification of your old rechargeable drill! I would lole to build one of these gadgets myself, If i only had one of those sweet small gasoline motors available to me... (Someone out there wanting to hook me up with one of those?)
These miniature engines cost thousands of dollars for some reason. Maybe you can fashion one out of a chainsaw motor instead, comes with a centrifugal clutch already, you'd theoretically only need 90 degree gears on the output, or just drill with the motor sideways!
No drill will ever be as cool as this one.
Jokes aside, someone already made the same thing on youtube.
@@shirufin5928 Gas powered drills are pretty common. I've been using them for like twenty years.
Have fun putting it in reverse 😂
lol imagine going to work and seeing some guy with this
@@MayorMcheese12lol
Everyone be showing off with their DeWalt drills, till they hear you revving Ur drill on the next floor. So sickkkk 😂
😂😂😂
wait gimme a sec i gotta fill mine up with gas
I have to fill up petrol and warm up the engine
Gotta fill up with unleaded! And warm up yeah. And create a chain.
Portable, light, low noise and vibration....ideal for getting into hard to reach places.
How the hell where you able to use that monkey emoji thing here on RUclips? 🤔
the torque on that might be insane
this comment.....
mkay I guess im not the only dirty minded person here
@@SYN7H3T1C4bro 💀😭😭🐱
What obligation did you feel to word your comment like that
This has got to be one of the, if not the most, coolest power tools out there! Extremely well done sir!
Только получается не электро )
@@stp2381exactly😂👍🏼
Spacemarine chainsaw 🌚
Bro: can i use ur drill
Me: sorry it ran out of gas 😂
กกฟกก
😮 13:25
해야할일이 너무 없어보입니다..
Well I think it would be faster to refuel it rather than having to wait for a traditional electric drill to charge
O miserável e um gênio
the most american drill
🦅🇺🇲🦅🇺🇲🦅🇺🇲🦅HELL YEAH BROTHER 🦅🇺🇲🦅🇺🇲🦅🇺🇲🦅
It would have a gun fitted in it😂.
american? than it should be cheap and not working...
@@derbayer8710Your country is 💩
@@anchitpatil7542Damn straight
I'll wait for the V12 to order 😂🤘
I'll wait until Full Self Drilling Mode and Ludacris Speed Drilling become Standard equipment.
@@trekinseattledrill plaid+
Rotary engine, like WW1 Aircraft
😂😂😂😂😂
The radial 16 with 700 horses
As a mechanic i need to have this. This would be a topgear special powerdrill.
Okay, watching you just magically materialize a drill just to fix your drill is very funny
Exactly what I was thinking! lol. The irony.
Tim "The Toolman" Taylor approves this. More Power!
Glad I'm not the only one who thought that!
Grunts three times
Please please please let the Torque Test Channel review this so we can see what type of power it's putting down!!!!
Without a clutch i don't think it's safe to stress test.
It fake 😂😂 lol
@@rinasmart9130 It's not, that engine is real and other youtubers have built a similar drill.
@@jovand6606 Thanks
dont think it's more than electric
This is by and far the coolest drill I've ever seen!!!
One flaw I found on this V8 drill is that while drilling with the shaft facing down/upwards, the oil in the engine would go in a way that some bits of the engine would not get any oil. I would suggest installing a dry sump system so that every part of the engine will get the oil regardless of what angle the engine is facing.
Very good point. I'm also curious how the drive shaft of the engine takes thrust loads rather than axial loads. Most car crankshafts are not made to take a load in that direction. I would fit thrust bearings.
Overall I'm thinking that a V8 powered flex shaft machine would make more sense.
Then again if it's about making sense...
2 stroke, no oil
I noticed he certainly didn't rev too hard probably to accommodate this issue.
Yes 2 stroke solves the oil issue as lube is in the fuel itself
@@backwoodsboyslogging261 It's a 4 stroke, according to the manufacturer's website.
@@orderofmagnitude-TPATP Nuh uh it's a 4 stroke according to the manufacturer's website.
That's awesome that's like every V8 Gearheads ultimate drill right there
Very cool!
If I had one I'd want mini coolant temp and oil pressure gauges!
While your there why not add a supercharger and a turbo 🤔🤯
@@J.R.jr-pc7bo That would probably rob the useful idle power. Maybe for concrete lol :)
Mình ở việt nam . Mấy anh em cho mình hỏi cái động cơ đó bao nhiêu tiền vậy . Ở việt nam không có bán
I may be wrong but no oil in these Toyan V8 motors, like an RC model motor.
@@nhutle9127 Why no small engines in Vietnam? Vietnamese like hobbies too.
I feel like this is something you would see on the old show home improvement, the binford 3000 v8 drill
I was thinking the same thing too. Lmao 🤣. Great comment. You got to it before I did. & Three days before I saw this video. Regardless great comment! 😂
Excellent fabricator skills thinking WAY outa the box!
Box? Which Box?
You rebel! Society is trying to go all electric, and you convert an electric drill to ICE! I like your style!
Hilarious.
Interesting overkill.
Going to get massive muscles operating that thing.
Great results.
I always thought that I was a good vehicle mechanic,having worked on Cars, Motorcycles, HGVs,Heavy plant,Tanks. But your skills are next level. Unbelievable skill.
This is actually one video on you tube that I would have loved to hear the commentary explaining how it was done.
Jaw dropped. Most awesome thing I've seen today 😮
Do those engines have thrust bearings. If not it might develop some problems when the crank is being pushed on while drilling.
also in the cylinder bore
Might also experience oil starvation when drilling directly downwards
@@markellii3093a two-stroke engine would be the remedy for that one 😂
I’m a mechanic and every engine I ever saw has the oil pick up on the front end where the harmonic balancer is. Front end of the oil pan. So that’s not technically true. If you lean the drill forward there’s possibly enough oil to still be getting pumped since the oil pick up is probably up front.
@@barbarianmylaststand3918 what about drilling the ceiling then?
You have just combined to of my most favorite things power tools and engines and made the most majestic thing I’ve ever seen well done sir well done
Badass! But how are you going to have it turn direction? 🤔
Only drill no coming back
Needs a transmision😎
flip the camera upside down🤪
@@airgunningyup 🤦 why didn't I think of that 🙃😅
easy, another V8 drill that runs backwards
ive always thought offhow cool a drill hooked up to a engine would be but i never knew how someone would do it this vid is amazing
Хочу дизельный перфоратор, делать ремонт в квартире, в 4 утра!😂
представь рожу соседа, который в 4 утра пытается тебе свет выключить на площадке а не сработало😁😁😁
@@сашоксашок-х2з🤣🤣🤣
Ахахахахахаахахха,ебать я ору
Будет ещё веселее когда твой дизельный перфоратор в разнос уйдёт. Суета на весь подъезд обеспечена😂😂😂😂😂😂😂
For those wondering. This is a Toyan Nitro 4 Stroke V8 RC car engine. IT IS NOT 2 STROKE. Uses preapplied grease when it assembled for lubrication
"Can I borrow your drill?"
"Sorry, it's in the shop getting an oil change and new plugs"
🤣
lol
IF you make this with a 2 stroke engine you can make it run reverse too
it is 2 stroke and it doesnt matter if its 2 or 4 stroke what matters is the gearbox i needs to have a reverse
@2StrokeWRLD but a 2 stroke engine IF you turn it backwards when starting it will run backward without a gearbox
One of the coolest projects I've ever seen lol
It’s exquisite,a fine piece of engineering and practicality.
That is insane, great job. Thanks for sharing.
Hi, with the 4 stroke from fridge compressor, could you make the rotor a permanent magnet style and put winding back over for a generator?
I spoted a few problems.
1st is you are applying thrust pressure on the crank that it wasn't designed for, that engine will not live long.
2nd, the coolant taps are on the wrong end of reservoir. When you drill downward, the taps get no coolant. Fill the tank up more, or move taps.
3rd, good for high-speed stuff but with no reduction, power is going to be lacking in a big way
So what you're saying is he should add a gearbox with a clutch and shifter? Hold on I need to shift my drill into 3rd gear
@@StephenSmith304 Did I say that? You did!
@@Guns_N_Gears I mean, it would have been a lot funnier if you said it which is why i gave you the opportunity to claim it but I guess I'll take credit for the joke 🤣
@@StephenSmith304 It was 😁 funny lol, but either way, seems a lot for a $3 dollar drill that won't last long!
It's just for display and drills some holes so it works for its purpose with no problem.
It needed a centrifugal clutch with a thrust bearing and a planetary gearbox on the front to make the output run to around 1000-3000rpm with WOT.
This is the least practical thing I've ever seen, yet the coolest fucking badass piece of equipment I've ever seen
Impressionante ideia, inclusive se a broca travar não queimará o motor! haha
This is an extremely great innovation, it can create a new trend, I hope many people know about it❤❤
chuck mounted directly on crank? them bearings or bushings lasted max 5min of drilling. working any longer then that, if any, it'öö soon have grenaded itself from over heating since it couldnt get any coolent whilst drilling down-right.
Shut up armchair engineer let’s see you build something cool
Stop. This is just for the fun of it!
Wicked. Creativity replying to the people who says the co2 is killing the planet. Love your videos bro. The world needs your skills to evolve.
ผมเคยคิดที่จะทำแบบนี้ แต่มาเจอวีดีโอคุณทำก่อน โอเคเลย ได้ไอเดียร์การทำแล้ว ผมไม่ต้องคิดมันแล้ว ดูคุณแล้วทำตามก็พอ 😂😂😂
This is the kind of ridiculous that keeps me up at night, and renews my faith in my species abilities. You sir are a freak. Thankyou, God bless. :)
Man I love this
Now that is proper cool! Some proper engineering skills to make that badass drill.
Can I please be on your zombie team?
This is one of the best youve convert.. a real engine power drill
This feels American 😂
Great vid. I would have shown how you changed the location of cooling tank feed port from the back to around the front side so that the engine still gets coolant when the drill is vertical. I was gonna comment that you should make that exact change, when in the last minute of the video I noticed that suddenly it had changed. Always good to show problem solving FWIW.
Using a drill to disassemble a drill is like the coolest thing I've seen today wtf
Well what can I say ,you just bought a smile to an engineer ,well done .
O M G!!!! COOLEST drill EVER i wanta have a beer with this guy!
0:44: YOU DIDN'T HAVE TO CUT ME OFF 🗣[Galaxy Brain Meme]
very cool!!! the v8 looks cool on the drill. awesome idea !
I was scrolling through RUclips trying to find something to watch and I saw this thumbnail and first thought was finally someone gets new subscriber
Gets it**
Always thought about how cool it would be to make such but with a .21 nitro RC car engine..... But this............ I really wanna see him test it, I'm sure its got endless potential!
You know youre buddy's a gearhead but when he pulls out his V8 drill to work on his V8 car........ There's a poetry in that.
Its so ridiculous and I love it. When a friend comes over you need to pull that out and say, "heres a real drill" lmao. Very cool bud
"Hey, I need to refuel my drill"
"You what?"
O.K. I f_cking love it !
Nothing screams a home improvement episode as this one!
Pretty awesome, and the exhaust blows away the shavings, too.
The manliest thing I've ever watched in my life
This is one of the most "Tim the tool man Taylor" things ive seen in a while.
와... 진짜 박력 넘치고 강력함이 느껴집니다. 대단한 아이디어네요 와우..
You are a sick sick man and that's why we love you!
It's nice that you used the engine for a practical application - nearly all of the other videos on these micro engines just assemble them and run them, but don't put them to work.
Cool, please make other house hold items with engines, e.g. TV, refrigerator, toaster, tooth brush, etc!! That will be very entertaining
Maybe the most practical thing I've ever seen.
Drill EV ❌
Drill V8 engine normally aspirated ✅
The most impractical drill, well done!
Awesome!! Next you gotta hook it up with some forced induction and a flat plain crank!!
Genius man for make the unique drill
I tinker with stuff a lot and have put together some crazy things but that is 100% awesome! I need it!
Dad:hey son pass me that v8 5 inch drill
🤣🤣🤣
That’s absolutely the worst thing you could do to an engine is to put it sideways or upside down. It’s supposed to remain flats when you put it upside down or different directions the oil will get into places it’s not supposed to go and it’s actually gonna damage the motor..
Co worker: yo can I use your drill?
This guy: sorry bro it needs an oil change.
So funny how people can find something wrong with a one-of-a-kind thing. Like how they know it's supposed to last more than five minutes lmfao. This is by far the most American outside of the box shelf, shop talk kind of thing any mechanic or fab tech or shit I mean anyone really that does any type of work with their hands this is like a memorabilia type thing I would imagine but actually works to show off with once in a while obviously he you got other drills lol. Way impressive and hats off to ya most impressive indeed for sure. Keep on keeping on yo!!!!
It's LITERALLY, Tim Allan from "Home Improvement"! Seriously if you were in the show Tim would do his lil "HarHarHarHar" grunt when he's talking about giving a tool MORE power Haha. I absolutely Loooooove this!!
Man i really wish my brain worked liks this. I mean dont get me wrong i am not incompitant. But I am not nearly as skilled with things of this nature still second guess some of my work. I am just now starting to learn how to use a tape measure properly. I was horrible with math growing up.
I need this! Perfect for pre drilling holes in my drywall.
I LOVE how the exhaust is there to blow off the dust and chips!!!!!!!!!🤣🤣🤣🤣🤣🤣
I'm a simple man. When I see V8 powered hand tools I hit the like button.
Goodbye main caps. So long crankshaft. 😅 I love it!
Finally someone putting a model engine to use
This man is too powerful... he's giving those "ls swap the world" guys too much inspiration to take the phrase literally.
Отлично Сэр! Но теперь мы желаем дизель!)))
Best hot rod hole maker on the block😎
But again, I know you’re just doing this for video purposes and I’m not expecting this to be something perfect like a factory would do or an engineer would do. It’s nice to watch good work.
That would be an instant classic in the Binford 2000 tool collection.
J.Clarcson byłby dumny!
Wspaniała rzecz w dobie "elektromobilności" ...
Brawo!
That’s absolutely glorious!
Really really impressive and really really cool 🤩👍
Awesome little project! It does amuse me, however, that so many people think its more powerful than a battery drill. This is a great analogy for an electric car. Need a battery to turn a motor to start the inefficient engine that is loud, cumbersome, & more finicky to build & maintain.
No more silent drilling at night, without anyone noticing! Never liked that secrecy anyways.
❤
They said, now iis the tme to switch your gasoline powered car to a fully electric vehicle, powered by rechargeable batteries. With thatt spare V8 motor collecting dust in your garage for too long, you now have finally restored balance in your part of the universe.
You really did an awesome DIY job, by a real V8 gasification of your old rechargeable drill!
I would lole to build one of these gadgets myself, If i only had one of those sweet small gasoline motors available to me...
(Someone out there wanting to hook me up with one of those?)
These miniature engines cost thousands of dollars for some reason. Maybe you can fashion one out of a chainsaw motor instead, comes with a centrifugal clutch already, you'd theoretically only need 90 degree gears on the output, or just drill with the motor sideways!
😮вот это чудо... Крутая дрель💪
Ok I saw the thumbnail and this is awesome
Wow... It looks fun and it actually works as a drill or desktop companion! Can I place my order today?
mmmm!!!
comodo, leggero, maneggevole, silenzioso, versatile, economico, ecologico, .......
...un attrezzo COMPLETO !
Great video, quality content, this guy has my subscribe
That would be perfect for a tool gear museum exhibit.
Pls bring a Little short of this masterwork
Did anyone else hear the Iconic "More Power, ugh ugh ugh!" said by Tim Taylor deep from your memory?