How things are going with my new Laser Pecker 4 Laser.
HTML-код
- Опубликовано: 29 авг 2023
- In this video I talk about the new laser. Show some of my first sales and uses and talk about likes and dislikes so far with the laser pecker 4.
Laser Pecker 4 you can buy it here:
www.laserpecker.net/?ref=ALXS...
Laser Pecker on Amazon
amzn.to/45yQNUJ
This is a link to another very popular laser. It's very similar to the one I own it's called the Xtool F1 Laser and also has very good reviews and has dual lasers like the Laser Pecker. amzn.to/3qPrz5H
(If you use one of the affiliate links above, I may receive a small commission it does not increase your cost and helps me make more videos and product test and produce more content.Thank you for using them if you decide to purchase something it's a great way to show support for my channel. I do purchase all the items in my videos. I am not sponsored by any product companies so all my reviews are truly my own opinion of the products you see me using in my business)
Music waaaayyyy too loud- always proof with headphones
Thank you for watching and for the sound tip
once you start talking, kill the background music it is very annoying trying to hear you over the music.
OK
What I do regarding putting the cone on is.. I use the PC software you indicated change the value from 1 to 20 or 30 and move it up. Them once it's on move back down same amount
That’s a really helpful tip. I haven’t used the computer app yet because there was some warning about how to upgrade either the firmware or software. I don’t recall which. Been too busy to mess with it much
You lost me on change the value? Is there a setting that moves it up in larger increments? Or are your just counting 20 or 30 clicks
Where it says 1 you can change it to any number you want. Then click up once/ down once
Wow ,awesome that’s a huge help I wasn’t really sure what lift height meant so I didn’t mess with it that’s a fantastic tip thanks for sharing 👍
Also the buttons on the LP still go up in Increments, so that’s a perfect solution for setting your focus and then using the PC software to just get the hood out of the way. Fantastic trip.
Nice video! Can you engrave brass bolsters and engrave designs into the hard wood handles on knives as well?
Yes on wood have not tried brass so not sure but I think so. no problem on steel and stainless steel
@@ALXSHARPEN THank you!
Hi there. Have you tested cutting or engraving acrylic? I believe there are certain colors that don't cut or cut well. Would love to know. Thank you for all the info you provided in the video.
not yet
Everybody complaining about stupid cover
Well if you’re going to hold it against a wall or a big object it will keep the fumes from blowing directly at you but other than that and really small things it’s not that useful-It would help if they could put a memory on the height adjustment then it would be more useful.
What do you use for the fumes?
I am actually planning an update video on that now will shoot it today and get it out very soon for all to see but I do have some videos showing some of my fume extraction updates in the laser section
I will have to pause the vid before I finish it, so forgive if you will share it later in the vid, but what settings did you use for the Airpods and for the knives?
1064 MN Laser 100 power 50 depth 1 pass for the engraving on knives for Black. For the earpods I used the default plastic settings I did blacken the case with sharpie first. There are some post from others with some other recommendation settings in the Laser Pecker Users Group on Facebook
So EarPods I did on ABS 1064 nm laser 8K power 1 depth 1 pass 1
How big is your exhaust hose? I have not been able to find the LP air purifier on their site yet, and I’m wondering if I can buy one from a different brand and use it…but I can’t find any information about the diameter of the exhaust hose needed. (I am waiting for my LP 4 to arrive!)
My hose is a 2 1/2 inch but I just got the one from laser pecker in the mail and that one’s a little bigger looks like maybe 3 inch on the metal exhaust hose they are selling so I’m wondering if the smoke unit and vented box are going to be 3 inch. 2 1/2 pvc hose matches the fan perfectly. I also built a temporary vent hood I will put the video out soon it only cost me $25 from something I found at Costco
@@ALXSHARPEN Thanks! I am waiting very impatiently for mine. I ordered the vent hood with it, as well as the rotary and flatbed accessories. I am excited to get it-but a little dismayed to see all these comparison videos coming out saying the XTool F1 is better. Ugh.
@@cynthiasymons I have been pretty happy with mine and I believe they will get the kinks worked out in time so far for me it’s done what I was looking for for my business and haven’t tried any of the advanced accessories. I did purchase all of them and have them all but still just learning it. I would like to try light burn but am waiting until the basic software isn’t doing enough for me.
@@ALXSHARPEN Thanks so much for talking with me tonight. I’m going to do the same with respect to LightBurn-can’t see paying for it just yet. Good luck with your business!
I added a much more powerful in line fan I’ll do a video on it it’s so much better now no fumes or smell at all