Hi! With the perfect instructions in your great video, yesterday I changed the motherboard successfully! My Deebot 950 charges again! Many thanks for you!
Hey I followed your instructions and all went to plan and i have fixed my robot. Thank you so much for making such a helpful and comprehensive video. It was excellent.
Thank you very much for this excellent video and instructions. I have 950 and it doesn't charge more than 18%. As I understand the motherboard causes it, so I'm going to change it according your helpful video! Thanks again!
Thank you for your video. I have a T8+ suddenly not charging it staying at 1% for days so I replaced a battery but no luck so I followed this video changing a mainboard then it works again. Paid $700 in 2020 and used it not many time so I guess build quality is not great. I got a mainboard from ebay for $50.
Which is right wheel? Is it the one with red brush or green ? I am gling to replace one of the wheel and i am puzzled about which is which before purchasing 😅 thanks
Hey mate. I'm thinking of doing the same to my 950. Its asking for the anti drop sensors to be cleaned out of the blue. They are clean, they have no rust (I never use the mop function). Checked the IR sensors with a camera and they only seem to light up down one side. This has me thinking king it's a motherboard issue and well worth $90 to diy it.
I'm no expert with these and haven't had an IR sensor issue yet, so I haven't had to research that.... but I'd first check out the ecovacs RUclips support channel to see if bloke there has covered it on his videos: www.youtube.com/@ecovacstechnicalsupport5278 It's worth a shot. I see he's pretty responsive on the comments of his videos too.
Hey, mine would not charge, bought new battery and it wasn't the problem. I replaced the motherboard as you did. Now it leaves the dock and stops immediately . Battery shows 100%. Any ideas? Awesome video, $800 for 2yrs, rubbish machine ....
That's a shame. Sorry, I'm no expert with these apart from what I showed on the video. I took a chance on the motherboard I bought of AliExpress and it worked for me. What yours is doing now, is exactly what was happening to mine before I replaced the motherboard, although my battery was stuck at 40% and wouldn't charge. So, for me, changing the MB enabled it to charge again and has been working normally since. Ecovacs has a YT channel that is extremely helpful... the guy on there seems to answer all questions, perhaps throw the question his way?
@@pushing4positive517 are you sure that all cables were reconnect? There are one on the bottom of motherboard and the other critical is the white strip. Double check them!
@Lizingrider unfortunately yes... now I don't know which one to buy to replace it. I have no faith in deebot any more. Thanks for the advice, was good to check it
Wow, super clear steps. Thanks for making this video. I'm looking to replace the motherboard in mine as well 😊
Glad it helped. 👍
Hi! With the perfect instructions in your great video, yesterday I changed the motherboard successfully! My Deebot 950 charges again! Many thanks for you!
Fantastic! I'm so glad to hear it worked for you. Thanks heaps for letting me know 🙌
Hey I followed your instructions and all went to plan and i have fixed my robot. Thank you so much for making such a helpful and comprehensive video. It was excellent.
Fantastic... really glad to hear that the video was able to help someone. Thanks so much for letting me know! :)
Thank you very much for this excellent video and instructions. I have 950 and it doesn't charge more than 18%. As I understand the motherboard causes it, so I'm going to change it according your helpful video! Thanks again!
No problemo.... Sounds like the exact problem my robot was experiencing. Glad the video was helpful 👍👍
Very Very Interesting. Good Job
Thank you for your video. I have a T8+ suddenly not charging it staying at 1% for days so I replaced a battery but no luck so I followed this video changing a mainboard then it works again.
Paid $700 in 2020 and used it not many time so I guess build quality is not great.
I got a mainboard from ebay for $50.
Awesome to hear this vid helped. Thanks for letting me know! :)
very helpful!!
The robot is bricked remotely by the manufacturer. Planned obsolescence.
Which is right wheel? Is it the one with red brush or green ? I am gling to replace one of the wheel and i am puzzled about which is which before purchasing 😅 thanks
They are interchangeable - doesn't matter.
Thanks a lot mate
No worries
잘봤습니다. 저는 같은 증상으로 알리에서 배터리 주문해서 교체하고 똑같은 증상인 것을 알았네요.. 그리고 최악의 경우인 메인보드 문제인 것을 알았습니다. 이영상을 먼저 봤었다면 메인보드 구매를 했을거 같네요;; 저는 그냥 폐기하기로 했습니다. 영상 잘 봤습니다.
Yes mine works perfectly now. Sorry to hear you had to throw away your machine... I almost did too.
Hey mate. I'm thinking of doing the same to my 950. Its asking for the anti drop sensors to be cleaned out of the blue. They are clean, they have no rust (I never use the mop function). Checked the IR sensors with a camera and they only seem to light up down one side. This has me thinking king it's a motherboard issue and well worth $90 to diy it.
I'm no expert with these and haven't had an IR sensor issue yet, so I haven't had to research that.... but I'd first check out the ecovacs RUclips support channel to see if bloke there has covered it on his videos: www.youtube.com/@ecovacstechnicalsupport5278
It's worth a shot. I see he's pretty responsive on the comments of his videos too.
Hey, mine would not charge, bought new battery and it wasn't the problem. I replaced the motherboard as you did. Now it leaves the dock and stops immediately . Battery shows 100%. Any ideas? Awesome video, $800 for 2yrs, rubbish machine ....
That's a shame. Sorry, I'm no expert with these apart from what I showed on the video. I took a chance on the motherboard I bought of AliExpress and it worked for me. What yours is doing now, is exactly what was happening to mine before I replaced the motherboard, although my battery was stuck at 40% and wouldn't charge. So, for me, changing the MB enabled it to charge again and has been working normally since. Ecovacs has a YT channel that is extremely helpful... the guy on there seems to answer all questions, perhaps throw the question his way?
Same for me, but i have the Deebot T8+
@@pushing4positive517 are you sure that all cables were reconnect? There are one on the bottom of motherboard and the other critical is the white strip. Double check them!
@jelreviews all good bud, not your fault! Just wanted to share my experience. Your vid was awesome!
@Lizingrider unfortunately yes... now I don't know which one to buy to replace it. I have no faith in deebot any more. Thanks for the advice, was good to check it
Hey I could only find 2nd hand m motherboards on ali, including your link. Was your replacement new?
Yes, it was new.
Donde puedo comprar la placa base para un modelo N8 AIVI tengo el mismo problema, la batería es nueva y no la carga
Try AliExpress... It's where I bought this motherboard