Quick, to the point, and clear about what you’re doing. Many youtube videos don’t check all 3 boxes and make it difficult when repairing things. Thanks for helping!!
@@jaysappliancerepair Great video. I have the same washer at home. My question is does it need that black box to be replaced or is it the switch (with cables). The PRoblem was its not spinning. Thank you
Maybe, but some of the repair methods I do in my videos are more for show and better angles to explain better. When I’m in the field and I change these latches, I don’t lift up the top. But that’s advance to a beginner
Great video. I have the same washer at home. My question is does it need that black box to be replaced or is it the switch (with cables). The PRoblem was its not spinning. Thank you
So since I posted this video they have come out with a new latch design that comes with a harness attached, i’m not sure if this will fix your machine, but if the latch is broken go to www.ordergeapplianceparts.com/ and enter your model number for the correct up-to-date part number
Thanks for the video, mine is doing clicking noises, is there any way to override/bypass the switch? I see 3 wires in the connector, could it be a 2 combination of connected wires to send signal to the main board?
Quick, to the point, and clear about what you’re doing. Many youtube videos don’t check all 3 boxes and make it difficult when repairing things. Thanks for helping!!
Glad it was helpful!
Thanks for taking the time to share this demonstration👍
My pleasure!
@@jaysappliancerepair
Great video. I have the same washer at home. My question is does it need that black box to be replaced or is it the switch (with cables). The PRoblem was its not spinning.
Thank you
Thx so much bro for tbis video. I would have spent way more time than necessary without it
Yes. Everyone else saying take the whole machine apart
Glad it helped
I am confused you unscrewed to screws how many really? How do you get the clips at the front of the controls out to pull back?
There’s a total of four screws
Can use small flat scraper or spackle tool in front pry up on right and left side
Thank you for this video!
I recently had my washer after it finished the spin cycle it wouldn't unlock could it the lid switch? Or something else 🤔
It could very well be something else, but if it is the lid switch, you know how to fix it now 💪🏾
@@jaysappliancerepair thank u very much
Can you share the link where you ordered that one part?
Encompass.com, then enter your model number
Thanks for the video.
You are welcome!
Bro Im not sure if we have the same washer but we definitely have the same lid lock. You don’t even have to unscrew the back
Maybe, but some of the repair methods I do in my videos are more for show and better angles to explain better. When I’m in the field and I change these latches, I don’t lift up the top. But that’s advance to a beginner
Great video. I have the same washer at home. My question is does it need that black box to be replaced or is it the switch (with cables). The PRoblem was its not spinning.
Thank you
So since I posted this video they have come out with a new latch design that comes with a harness attached, i’m not sure if this will fix your machine, but if the latch is broken go to
www.ordergeapplianceparts.com/ and enter your model number for the correct up-to-date part number
My lip keeps locking and unlocking every few seconds will this fix it
Lid*
Yes this should fix that issue
Thanks for the video, mine is doing clicking noises, is there any way to override/bypass the switch? I see 3 wires in the connector, could it be a 2 combination of connected wires to send signal to the main board?
If you disassemble the switch and remove the striker it should work just fine, I actually just discovered that myself
But I must say, do that at your own risk!
So, to remove the lid. Any idea what type of screw it is
1/4 inch hex and a Philip head will do the trick
Still cannot take lid off