*Thank you very much !! I was literally freaking out, the PC was crazy, turning it off and on randomly, I easily identified the defect, it was the buttons on the front panel, but the keys were short playing each other and only with the yellow and black wire , I called, however, the F1 flat messenger appeared, I do a jumpered and solved my problem !! Thank you*
To all who are asking how is the power button working: the pins he put the jumper on are not the same as the ones you attach the front panel cables to. Completely separate.
william just a quick question. i put my motherboard from a dell optiplex 3010 into a new case and i get the same message you were getting do you think this idea would work with my situation?
hi, i just did the same thing when i swapped out the case. i just pulled the power plug from the old case and just let it hang from the socket on the mb.
*Thank you very much !! I was literally freaking out, the PC was crazy, turning it off and on randomly, I easily identified the defect, it was the buttons on the front panel, but the keys were short playing each other and only with the yellow and black wire , I called, however, the F1 flat messenger appeared, I do a jumpered and solved my problem !! Thank you*
I still don’t get how touching the power button did anything
Thanks brother! You solved my issue in less than a minute!
Thank you William, this fixed the same power button alert problem with a Dell 390 motherboard in a Dell Vostro 260.
so wheres your power botton connected ?
thanks, it worked here, I changed the motherboard and it gave this error, with the tip of your video it worked.
Same problem with a replacement motherboard, and the jumper fixed it. Many thanks for the upload!
To all who are asking how is the power button working: the pins he put the jumper on are not the same as the ones you attach the front panel cables to. Completely separate.
Olá, não entendi... tem outra forma de conectar o cabo do painel frontal?
Where do you connect them to
how you switch on your pc, if you didn't connect front io cable?
you just jumper pin 2 and 4, and not plugged other front io cable.
eastkidz conect everything normal every single cable in the right place and found a jumper to put in the Conner
Amazing your solution, thanks man, simple and eficiency.
Thanks William that worked perfectly.
It’s dell power supply and I have yhats thanks man
Thanks dude, this fixed the issue with my Optiplex 990!
Thanks for this information!
Thanks! It works great now. I had the same problem after replacing the MB with one from Amazon.
thank you sir
Thanks you mate, juste fixed my Optiplex 3010 with this
I have also this same problem in my optiplex 3010 now what to do?
@@shafinrahman6524I did not get it dude,
Problem solved bro thanks for asking.
Thanks man!!!!!!!!!!!!!!!!!! Worked perfect :)
Thanks... ME ajudou demais obigado
cooool cela fonctionne avec mon ordinateur
tanks brothe!
Thank you so much:)))
good, very good,
Thanks bro,you help me
God bless you
thank you, it worked
thank you ihave this problems and i need solution for front panel alert on 3020 similar to 390 series tigris motherboard
william just a quick question. i put my motherboard from a dell optiplex 3010 into a new case and i get the same message you were getting do you think this idea would work with my situation?
I did what you showed on your video, but about one week later, the error showed up again. the pins were still jumpered. Any suggestions?
Where do you get jumper
Obrigado, deu certo valeu!
hi, i just did the same thing when i swapped out the case. i just pulled the power plug from the old case and just let it hang from the socket on the mb.
thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanksssssss
ok im try..
my dell 990 sff , not turning on while on jumper
Hi i/o cable , usb eror pls fixed video
fix you camera focus it is quite blurry, painful for eyes!
Hola me podes ayudar tengo 4 alert :(
john rodriguez cual alerta tienes
@@williamguillen7738 pude resolver 3 , me falta la del panel friontal.
hi bro i have same this pc but my mother orang light as show deal why plz reply me
bhai theek hua kya ???
@@pcshorts1406 kabaar me phenk Diya
how turn off and turn on the computer???
Jonathan Zuñiga just conect everything normal
And just include the jumper at the Conner
@@williamguillen7738 hi, can u show an image, how to connect jumper and power switch cable at the same time? I don't understand this
@@xanzac bro yess how to do
@@pcshorts1406 did you figure it out? And also where do I find a jumper?
I follow. how do you connect connector and jumper at the same time?
FK DELL! Never again i buy their computers!
Error after error during boot...
Não entendi nadaa ,not falo inglês, from of brasil
how you switch on your pc, if you didn't connect front io cable?
you just jumper pin 2 and 4, and not plugged other front io cable.
Infiniti Infotech connect everything normal if after you have this problem found a extra jumper and just put it at thi counter