You changing the resistance of the wire cutting it to different length. Will the BMS work correctly while balancing and checking the voltage of each cell under load?
Где взять, чем заменить, при разборке отрывает трансформатор с мясом TR73-151 bms 250a.так сложно сделать всё на резиновой прокладке? Чем его заменить? Его нигде нет в продаже. Такие бешаные деньги за одноразовую сигарету. Я ращочарован
Why do you even make the video with BMS connection if you can’t do that right? You made it wrong! First black wire goes to the (-) minus, but first red wire goes to the same cell plus (+) Next red to the next plus(+) and so on. No wonder that some of battery’s just burning 🔥 down if they have no BMS connection.
Look again at the video, it's wired correctly. First black wire goes to pack negative, second wire goes to the other side positive. It's a 2P pack so even though the positive wire is located on the cells next to the first group they are still electrically connected in parallel and act as a single cell.
thx for video. very best Elhamdülillah
Hey, greetings. Where could someone get the light board for connections
What about decharging cable?
You changing the resistance of the wire cutting it to different length. Will the BMS work correctly while balancing and checking the voltage of each cell under load?
Dear friend, it have no effect. The resistance of the wire is very small, so it will not change voltage or anything else.
Чем заменить или аналог трансформатора TR73-151?
Где взять, чем заменить, при разборке отрывает трансформатор с мясом TR73-151 bms 250a.так сложно сделать всё на резиновой прокладке?
Чем его заменить? Его нигде нет в продаже.
Такие бешаные деньги за одноразовую сигарету. Я ращочарован
How effective is the balancing of this BMS?. If a bank of cells reaches 4.2V before the others will charging stop on the other cells?
Resistors used to keep voltage even.
What do you use to power the BMS to charge? Would a Li-ion Battery charger With an output of: Dc42v at 1.5A work?
If its a 10s pack then that should work (4.2v x 10)
Where do you connect charging cables?
Depends on BMS. (Common port) black to BMS P-, Red to battery positive wire.
Red cable coming from battery and black cable from bms
Hi my bms has no power wires ,for example red +black- ,i do have a b- and p- and c- ,any help is appreciated
10 s 36v 30 a BMS ka kya price hai
Thank you
Why do you even make the video with BMS connection if you can’t do that right?
You made it wrong!
First black wire goes to the (-) minus, but first red wire goes to the same cell plus (+)
Next red to the next plus(+) and so on.
No wonder that some of battery’s just burning 🔥 down if they have no BMS connection.
Nope.
us.v-cdn.net/6024911/uploads/editor/0a/cf5vf8wf23hc.png
Look again at the video, it's wired correctly. First black wire goes to pack negative, second wire goes to the other side positive. It's a 2P pack so even though the positive wire is located on the cells next to the first group they are still electrically connected in parallel and act as a single cell.