2 key take aways from this video which were IMMENSELY helpful was 1. where the plastic piece fit in as you put back the assembly and 2. to seat the gasket in FIRST before you push down on the assembly at the end. YOU saved me SO much time. thank you
I like that you are careful at every step not to damage the parts you are handling and in general the care you take in making sure everything fits correctly. Great video among a sea of poor ones.
Now this is a great video ...!!! He actually shows the position how to grab it and how to pull it out and put it back in and explains everything in between this is how you make a video great job I gotta do this job on my car now....My pump is working fine but my gauge ain’t reading right hope it’s just a sender unit I need to do some troubleshooting check the omh reading on a meter...! What I like is he explained what others don’t explain making this job very easy now thank you very much
A couple of things I would never buy from a salvage yard one being a used fuel pump, it's not worth the liability, if you're left stranded depending how far you are from home the towing charge will outweigh the cost of buying a new name brand pump like airtex, another is a water pump, you're just asking for trouble. I priced an airtex for my 2003 530i they're around 125.00.
I just replaced mine on a 1998 528i. The orange light does not come on when gas is low. Also, the car ran out of gas when the gauge is at a quarter. What did I do wrong. Thanks
2 key take aways from this video which were IMMENSELY helpful was 1. where the plastic piece fit in as you put back the assembly and 2. to seat the gasket in FIRST before you push down on the assembly at the end. YOU saved me SO much time. thank you
I like that you are careful at every step not to damage the parts you are handling and in general the care you take in making sure everything fits correctly. Great video among a sea of poor ones.
The little o-ring visual was really important for clocking when I installed mine. Super good video
you deserve more attention to your channel ! short , clear voice , & points out every possible obstacle.
You are the man, man . I looked at your video a few times and caught on to new tricks..the best part is the seal.life saver
Now this is a great video ...!!!
He actually shows the position how to grab it and how to pull it out and put it back in and explains everything in between this is how you make a video great job I gotta do this job on my car now....My pump is working fine but my gauge ain’t reading right hope it’s just a sender unit I need to do some troubleshooting check the omh reading on a meter...!
What I like is he explained what others don’t explain making this job very easy now thank you very much
I just replaced my E39 fuel pump yesterday based on this video .. thanks 🙏
Glad it helped
@@HakenE30 I would like to mention that I changed it by Hyundai Azera fuel pump with some modifications and it worked
Internet 2.0 this guy is the man
A couple of things I would never buy from a salvage yard one being a used fuel pump, it's not worth the liability, if you're left stranded depending how far you are from home the towing charge will outweigh the cost of buying a new name brand pump like airtex, another is a water pump, you're just asking for trouble. I priced an airtex for my 2003 530i they're around 125.00.
New to the channel. Loving it.
Fantastic video, just continue the good job.🤩🤩
Helped me a lot. Thanks for the video.
Jarooo ... You have a beautiful mind ✌🏻🤪🤳🏻
thanks man.. nice video.. Allah
bless you
good vid.
carefully cutting hose stubs with a box cutter along their length works good too :-)
Great video, my friend!
Great video👍 hope this will fix my 2003 BMW 530i no start but crank
Did replacing the fuel pump work?
Excellent tutorial. Are you a teacher?
good job thanks
thx for the vid. Anyone here with experience with a Magneti Marelli replacement pump, quality wise?
Found out the original is Pierburg.
Hello, my 528i fuel gauge is showing incorrectly. Should I replace this part?
there two, you could remove both then operate the level by hand on both and see if fuel gauge is corresponding to positions
Will it be okay to just replace the fuel hose connected to the fuel pump housing? Cause mine broke into half and im planning to replace it
@drick3694 did it work and if it did where did you get a hose from?
What o-ring size is in minute 5 something? Or oem number? I need one. Thanks
To kralju
شكرآ للتوضيح
Where i can buy a new quel pump with the relative level sensor?
Fuel pump*
I just replaced mine on a 1998 528i. The orange light does not come on when gas is low. Also, the car ran out of gas when the gauge is at a quarter. What did I do wrong. Thanks
What was it?
Basicallt putting my bodyweight on the seal and it wont go in
seal may be too old and dry, need a new one then
Я теперь понял что неправильно установил насос , после просмотра этой видео
So e39 have 2 fuel pump?
No.
I dont like to dremel near fuel :)