OMG 🥰Bring back lot of memories when I was in Taiwanese military boot camp. Both of them are such a smooth rifle to shoot and so easy to clean and when you do the maintenance work you will know that's a reliable gun. T65 first came in 1976 and T91 was in 2002.
Ive been watching you for awhile and I love your content. The only person who might be more knowledgeable than you is Ian Mccullum but you also own most of the weapons you talk about which is really awesome. Thank you for the content!
Ah, the sounds! I do not miss the military training, but I do miss the shooting practice. And I really jealous of you for being able to shoot full-auto.
One of my squadmates had the same problem with the dust cover when we were having the disassembly and reassembly exam. I am not sure if our issued T65K2 has all the same parts as yours, but that squadmate almost broke the dust cover the same way you did.
This is info on your Arsenal Sam 7 SF. The. Cleaning rod comes in two parts. The front can be installed under the barrel.The back part can be installed on the side folder stock where the crimp is .Then wrap two pieces of velcro at each end .The section of cleaning rod fits perfectly.Research the Bulgarian Army carry the section of cleaning rod that way. So the indent in the tubing was in fact designed for that purpose.
@Mishaco Was hoping you could let me know who you had install the military FSB and pin and weld. I want to make sure it gets done right with the 30 degrees gas block port drilled etc. Thank you sir!! I watch every video even the blackboxes:)
Looks like it doesnt have forward assist assembly to fix jamming issue. That rifle have high risk of getting blown off by the ammo if the ejector is not fixed properly.
My drill seargent told me the k2s are much more accurate due to the 20-inch barrel and the much beefier stock. I've shot both and honestly I'm torned with the age old dilemma of choosing between full length and carbine length. I can tell you that the k2 is easier and softer to shoot but malfunctions a lot more than the t91. However, I felt that the k2 instilled much more confidence in me than the t91 when I was in service. I think it is because the length and the weight of the gun made me feel like I was holding a more capable weapon. It is also the fact that the length of it allows me to hold it like a spear when sitting and kneeling.
Great video.. You really got me on a t91 kick. Both of mine are wolf uppers unfortunately. But i have ran over 2000 rounds through my 16 inch barreled one. Not a single malfunction. I did put a heavy anti tilt buffer in.. And had even better results. I swear these are the ak mans ar. Let me know if you ever come across an authentic buffer / stock. I need one more. I will definitely go for the k2 once it hits the market.
To be fair, we only ran into troubles with the Wolf A1s when trying to install military type gas blocks....and even then only on newer A1s. The first 4 we did the swap to work fine. Only trying to be 100% transparent.
Enjoyed the video. Good to see the T91 doesn't have a forward assist (a dubious device that Eugene Stoner thought unnecessary), but hate that it doesn't have a shell deflector.
@@echodelta2172 the latter we could see open up. Similar to how royal tiger imports got mausers from Ethiopia, I was hoping we’d see Famas kits from former French territories
Down with the K2, good to go! Thumbs with the "What The Frack" t-shirt! Curious to see the carbon build up in the K2 upper. What ammo brand were you running? Finally, what will it cost?
There is a special carry handle rail originally made for airsoft, but also works well on real gun. It would be cool if you mount optics on T65K2. imgur.com/a/91YapvP
OMG 🥰Bring back lot of memories when I was in Taiwanese military boot camp. Both of them are such a smooth rifle to shoot and so easy to clean and when you do the maintenance work you will know that's a reliable gun.
T65 first came in 1976 and T91 was in 2002.
Guys go leave a comment about the atf proposed changes to receivers and braces. We need to let them know how we feel
Ive been watching you for awhile and I love your content. The only person who might be more knowledgeable than you is Ian Mccullum but you also own most of the weapons you talk about which is really awesome. Thank you for the content!
Funny you mention Ian, i just now finished a short video on French production Kar.98ks at the Mauser factory in 1945.
好久沒聽到T65K2 的槍聲了 那是初中時打靶體驗也是我對M16A1深愛的開始
Not really, T65 = M16A1. The K2 is more inline with the M16A2 based on twist rate, fire mode, muzzle device, and sights.
@@misha5670 是的，台灣T65K2其實改用新的槍管纏距，更適合使用SS-109北約彈，T65K1才是跟M16A1一樣用M193彈藥，槍管纏距和彈藥都不同。
Love That Rifle Misha 😀❤️😀
Ah, the sounds! I do not miss the military training, but I do miss the shooting practice.
And I really jealous of you for being able to shoot full-auto.
Well done presentation as usual.
I wish I had a range in my backyard 😔
Wish I had a backyard
You ain't the only one i wish i had a private that went up to at least 1,000 yards. Hopefully one day
That k2 is gorgeous
I want the Norinco AR15 stock set.
That cat tentacle at the end...Oh--Nice video! That is the external piston system I would be most interested.
I love how he tried to rack it like an AK on the first issue, me too man me too
One of my squadmates had the same problem with the dust cover when we were having the disassembly and reassembly exam. I am not sure if our issued T65K2 has all the same parts as yours, but that squadmate almost broke the dust cover the same way you did.
Two really cool and interesting rifles i genuinely hope that Taiwan dose not get abandoned by the west and go the way of rhodesia
Amen
The difference is Taiwan Semiconductors is extremely important to the global economy, and China begrudgingly knows this
This is info on your Arsenal Sam 7 SF. The. Cleaning rod comes in two parts. The front can be installed under the barrel.The back part can be installed on the side folder stock where the crimp is .Then wrap two pieces of velcro at each end .The section of cleaning rod fits perfectly.Research the Bulgarian Army carry the section of cleaning rod that way. So the indent in the tubing was in fact designed for that purpose.
@Mishaco Was hoping you could let me know who you had install the military FSB and pin and weld. I want to make sure it gets done right with the 30 degrees gas block port drilled etc. Thank you sir!! I watch every video even the blackboxes:)
Love the BSG shirt. Loved it even more when you follow that up with a Vulcan cat shirt.
Good video. 👍thank you my friend. Keep it up
Thank you for watching, cheers.
Looks like it doesnt have forward assist assembly to fix jamming issue. That rifle have high risk of getting blown off by the ammo if the ejector is not fixed properly.
Where do you get those awesome rifles, ?? 😀😀
Just got a hold of a 16 inch t91, cant wait to play with it, the h buffer works well enough? I was hearing that they liked heavier buffer weights
So wait will the K2 kits from t91 tactical be newly manufactured or are they made from surplus parts?
My 14” early t91 ran just fine w/ Heavy buffer. Wasn’t the most accurate gun... definitely interested in this t65k2
My drill seargent told me the k2s are much more accurate due to the 20-inch barrel and the much beefier stock. I've shot both and honestly I'm torned with the age old dilemma of choosing between full length and carbine length. I can tell you that the k2 is easier and softer to shoot but malfunctions a lot more than the t91. However, I felt that the k2 instilled much more confidence in me than the t91 when I was in service. I think it is because the length and the weight of the gun made me feel like I was holding a more capable weapon. It is also the fact that the length of it allows me to hold it like a spear when sitting and kneeling.
Really cool
I’ve got a Wolf A1 12.5” with the standard gas block. It works just fine - misha, did yours only have issues after adding the Taiwanese gas block?
That wasn't mine failing. That was one of a customer's who sent it over to have ahe military GB installed.
What about the T65 at the range?
If you had seen the inside of the car that day, You would understand lol.
@@misha5670 I'm just chomping at the bit because mine is taking longer than expected.
@@lancekilkenny721 Yeah, its not easy getting parts and what-not right now.
Great video.. You really got me on a t91 kick. Both of mine are wolf uppers unfortunately. But i have ran over 2000 rounds through my 16 inch barreled one. Not a single malfunction. I did put a heavy anti tilt buffer in.. And had even better results. I swear these are the ak mans ar. Let me know if you ever come across an authentic buffer / stock. I need one more. I will definitely go for the k2 once it hits the market.
To be fair, we only ran into troubles with the Wolf A1s when trying to install military type gas blocks....and even then only on newer A1s. The first 4 we did the swap to work fine. Only trying to be 100% transparent.
Enjoyed the video. Good to see the T91 doesn't have a forward assist (a dubious device that Eugene Stoner thought unnecessary), but hate that it doesn't have a shell deflector.
I really enjoy the T91 upper. No issues out of the box. Really love what it stands for as well.
Do you think there is any hope we will one day see French Famas parts kits come into the US?
Sadly, very slim.
@@echodelta2172 the latter we could see open up. Similar to how royal tiger imports got mausers from Ethiopia, I was hoping we’d see Famas kits from former French territories
Make this happen! Get Ian to sweet talk those frog eaters
@@misha5670 guess we gotta petition Brownells to expand their retro line 😁
Would anyone build them? We have Stgw 57 kits that as far as I know aren't getting built.
Down with the K2, good to go! Thumbs with the "What The Frack" t-shirt! Curious to see the carbon build up in the K2 upper. What ammo brand were you running? Finally, what will it cost?
4:55 Use belt buckle to pull the pin out not fingernail.
HAHA "Habitat for minnows!!" I hate when a mag issue ruins a day at the range :-( I love your videos brother!!!
Does the Taiwanese military use m-lok?
Some
@@veryinterestingpersonaliti8321 I’ve been trying to track down the quad rail with no luck.
u have a nice fridge..
👍👍
I'm good ?? SCARY BRO !!
ไต้หวันออกแบบปืนออกมาดีมีประสิทธิภาพดีมากเยี่ยม
There is a special carry handle rail originally made for airsoft, but also works well on real gun.
It would be cool if you mount optics on T65K2.
imgur.com/a/91YapvP