My friend has 1 of the original T65 in the US. It was brought in by Colt to investigate if it violated Colt's patents. I have pictures in high detail if you want to see markings.
I noticed that one lacks a part every other T65 I've ever seen has, it screws into the front sight base basically under the night sight when it's flipped down. Does he know what it's missing? Does it shoot reliably? It's a very tight screw thing, definitely not adjustable gas in my opinion.
@superfamilyallosauridae6505 It's the gas hole screw. The ROC military issued a combination tool to each of these rifles. You can use this tool to take down the gas hole screw and use a scrapper to clean all the carbon residuals. Also the gas tube can be taken down with the tool.
Add a little information. The Taiwanese Army did a test to compared the AR-18 with the AR-15. They believed that the AR-15 was more accurate and easier to shoot, but the AR-18 was more reliable (considering the ammo at that time used corrosive primers, etc.), so they finally made the decision was to transplant the gas system of the AR-18 to the AR-15. The looseness of the old handguard was never resolved on the T65 rifles, as the design required frequent removal of the handguard to clean the gas system. (The same goes for HK416) The T91's gas system is designed to can be taken out for cleaning without dismantling the hand guard, which is to completely solve this problem. A comparison can be made to the Wolf A1 Upper which is available in the US.
Was it really for reliability or to dodge the problem of licensing production? Colt actually had a T65 imported to sue for patent violation, but Colt lost because of the gas system being different. That one T65 transferable machinegun is out there.
They copied AR-18 first, but switched to T65 prototype without giving any reason. Only later we learned that AR-15 style rifles, piston or not, aced in mud tests. Mud is plentiful in Taiwan.
Yeah, during my military service, we have to like loosen the handguard screw so that the gun won't jam up so frequently. But it jams anyway, and our ammo is still corrosive ( BTW, we are still using the T65K2 Even with the improved handguards with heat shield, they burns after a mag, and we have to share guns at the range, so when I got the rifle, the handguard immediately vaporize my sweat on my hands
Not really if you are willing to fish out $1200 for a kit, which you will have to pay extra to fix and put it together. IMHO, the ROC Bureau of military equipment should just make sporterized Type 57 with forged receivers and cold hammer forged, chromelined barrels and sell them to the US.
It’s a love and hate feelings for me - I used to hold this gun for at least 6-7 hours a day (2 watches per day, if not 3) for 2 years when I served the army in Taiwan. I was also trained with M14 (type 57) for the boot camp. They are like my missing limps and I can still feel the weight of these rifles in my hands😂
Like in the song "Karavan" by russian musician Aleksandr Rozenbaum, when talking about going back to civilian life during the Afghan conflict: "You'll never get used to the feeling of your shoulder being free from the weight of an AKM"
I have served compulsory military serive for almost two years as a Staff Sergeant in an infantry Devision in Taiwan's Army. It was from 1989 to 1991 and the Battalion was one of the battle-ready units always ready for action within hours. During that time, my unit's standard personal weapons were this exact T-65. The flimsy hand guard, and the worn out pistal grip in the video brought back a lot of old memories! During some training /testing sessions, I had some chances to use US made M-16 for target practice. Main impression for me is that the cross section of the US made M-16 is tri-angle and lighter in weight. Personally, I think the M-16 is well made and had less feel of recoil. On the other hand I consider the T-65 is a rugged rifle perfect for a conscripted army. It shoots as good as a M-16 in my personal opinion. In my company's armory, there are also some US made M-14s (all with synthetic stocks), Taiwan made M-14 clone (all with wooden stock, called T-57). M60 machine gun, the one used by Rambo, were equipped for every infantry platoon. The officer's side arms were US made 1911 45 cal. Since I am in command of a platoon in Battalion HQ company, we got a Browning 50 cal for both airdefense and fire support. That was a blast to shoot 8-).
You can petition it to the bureau of military equipment to host a visit, but you know they'd rather have one less task to deal with unless there's some money to be made. Maybe Chris from Small Arma Solution has better access, since he seems to have done some industry consulting jobs before.
@matchc0635 Except you don't get the CHF chronelined barrel made by Arsenal 205th. Some Wolf A1 upper had some headspace issue as demonstrated by CRS firearms. Definitely barrel and barrel extension issue cuz I encountered it myself when sourcing cheap AR parts. Never buy cheap in-house brand barrels and BCGs again.
I'm a Taiwanese and did my service with this rifle(K2 ver). Though we moved to T91 recent years, still T62K2 is more accurate in the field and largely used. Cheers from Kaohsiung, nice shirt btw.
Cheers！歡呼吧！ 台灣人來報到啦！ I used to held this rifle once in my military service, but then I was using t65k2after that and never touch this type of rifle. Thanks for Ian who introduce this gun! 歡呼再一次喔！
As a Taiwanese myself, I really thank you for taking a look at this gun, living in Taiwan, we tented to think the T65 series of guns are just big ol pile of junks, but your detailed look at this thing really shed a new light on it for me. By the way, T65s are still largely use in Taiwan til this day in training purpose and reserve, the medical school I studied in even has its own stock pile of deactivated T65s for national defense education class, to teach students the basics of how to operate an AR pattern rifle.
I'm not Taiwanese. The farthest thing from it geographically: I'm Paraguayan (Paraguay is one of the few countries on earth that still recognizes taiwan as the "real" china). This is our main assault rifle as well. It did it's job well AFAIK. I'm glad it has been finally covered in this channel.
Glad my country can help your country out, and we do talk a lot about Paraguay being one of the very few allies we have, every time we talk about allies on the news, we have to mention you guys, we are proud of it.
@@4tomic5hark Likewise friend, likewise. Hopefully we can all live in peace with our true nationalities without fear of persecution of being threatened by another nation someday.
@@superfamilyallosauridae6505 Both. Assault rifles were too rare (Edit: Too rare HERE) and we basically took all we could. The idea was bringing K2s, but we took some "normal" T65s as well. Case of beggars can't be choosers.
Great video. When I went through basic in '85, lefties used clip-on brass deflectors at the range. Lefties who didn't...ended-up with hot casing burns on them!
A clip-on brass-deflector sounds like a very clever idea, doesn't require any alterations to the existing tooling, or permanently modify an existing item, and could be made of thinner and cheaper material than the rest of the upper.
When did he say it was a replica? This is a real T65, the only things not original are the lower receiver, barrel, and trigger pack. It's a parts kit gun from South America.@@garrysekelli6776
Taiwan gave a bunch of these to the Haitian National Police in the late 90s, early 2000s. They're still in service to this day, with the M14 and the newer Galil ACE. Funny enough, I've NEVER seen them with a carry handle. I didn't think they had one.😮
@ReinKayomi Phillipines Police uses them too? That's pretty cool. There's getting very popular here in Latin America. They're standard issue in the Colombian and Chilean Armed forces now, I know Honduras and El Salvador uses them too.
52 years later, I have now learned why my M-16 in Basic Training had that stupid "carry handle". Which we were strongly discouraged from using by that description.
Yeah, it's a very military thing to do. It's like when I was in the Marines and we weren't allowed to carry a pen in the built in pen pocket in our BDUs. Instead, we could only carry a pen clipped to the inside of the blouse on the strip of fabric where the button holes are.
@@ajeje1996 I have no idea, it was just something that we were told early on, maybe as early as boot camp. I've always suspected that it was to be contrarian because maybe the Army allows their people to put their pens in the pen pocket. The Army rolled their sleeves up with the outside showing so we roll them straight up with the inside showing, they tuck their pants into their boots so we blouse them on the outside. I don't know if we or the Army actually did these things to be different from each other, but it sure seemed like it to me.
He would just happen to have a Taiwanese marine corps camouflage outfit. I like to imagine he has a huge wardrobe with big swing-out doors. Does he have a redcoat uniform? When he inevitably reviews laser and plasma rifles, will he have XCOM gear?
In any case, he would have a suitable "hat" in his collection in case he doesn't have enough equipment for a "full cosplay": ruclips.net/video/pvi1u1U_h1g/видео.html It always made me laugh when he said he was gifted a few Irish Army hats, but didn't have a chance to wear them on screen because he didn't have an iconic Irish firearm to pair with it... except the AR-180. Which would be too spicy of a choice lol
Didn't Ian dress up as a wastelander when he was doing cross-promotion with the one RUclipsr who was talking about the fallout series? it wasn't a vault suit but he put in the effort.
Props to Ian for sacrificing his cheek to demonstrate left-hand shooting . I really appreciate Ian's knowledge and respect for Chinese cultural history..
Back in early 2000s when I served in Taiwan military, my unit was equipped with M-16A1/AR-15, they were pretty old since they were replaced from front line troops, and my unit only handled logistics, no facing immediate combat for our missions. Yes, some "M-16s" in my unit did marked as "AR-15", but in general we just referred them all as M-16. And rumor has it that some M-16 in my unit was shipped to Taiwan right after Vietnam war, they had probably killed enemies in the battlefield.....
Finally, some Taiwanese guns! I'd been searching for some historical videos on the type 91 and realized Forgotten weapons hadn't covered either the t65 or t91. What a nice coincidence for this to show up on my feed right after.
I'm hoping that he can cover a T91 soon. T91 upper receivers are actually being imported into the United States directly from the original manufacturer now, so T91s are now a lot easier to find.
Yeah, Ian really needs to get hooked up in East and Southeast Asia. Probably not mainland China for various political reasons, but places like Taiwan, Japan, Indonesia, and Singapore all have some interesting small arms that aren't well-documented outside their countries.
YES! Thank you for shedding light on this rifle! As someone who calls Taiwan a second home, it gives me great joy to see an indigenous design being featured. Appreciate your work on this video. Please tell me there is a T-91 video in the works. Oh and Ian looks SWAGGY in them Taiwanese camo.
I'm so glad this rifle made the review schedule! I went with an 80% A2 lower because I couldn't find an A1( Thanks for selling out Nodak) I did get it engraved in Mandarin, and it looks cool. I replaced all the parts ( except the bolt carrier group), repainted inside the hand guard with metallic paint, and added an anti tilt buffer.1 in 7 pencil barrel let's me shoot MK 262 and she groups around 2 MOA All in all, it's a great rifle!
I'm Taiwanese and had to do mandatory service like many others my age at the time. We did months of basic training with these T65s. Compared to the T91 that we got later on after boot camp, T65s are heavier, harder to clean and disassemble, and would jam a lot more often. Safe to say I do not miss this gun, doing the bayonet drills with this thing was a real pain lol.
I'm from Taiwan, my father used the early production of T65 in his service, says it was too easy to break stock during exercise, but didn't mention about heat problem。 And I used the T65k2 as high school shooting training, there are still a lot of T65s (most of them are k2) operating in the police and logistics forces。
As of 2023, the T65 is still used for bootcamp marksmanship training for the conscripts. I definitely remember there being a carrying handle though. The fire selector was marked S, 1, 3, A. Great video!
Very nice video & history. I wasn't aware the Garand & M14 had rotating sling swivels, and now I'm mad it was omitted on the M16A1. During Marine training, we were required to surmount several obstacles, and run some courses with the M16 slung over our backs. A number of us developed semi-permanent sores on the upper left back from friction with the forward assist. Rotating swivels? Yes, thanks!
If that's radium painted even if they no longer glow they might still be horribly radioactive, radium has a half life of 1600 years, so it's gonna still be pretty hot after 50 or so years since when it was painted, radium paint tends to stop glowing not because it's no longer radioactive but because it eats into the phosphor it was mixed with so it doesn't react with anything. If you test it with a Geiger counter etc and it does tick away, might be worth cleaning it off safely, if the old paint flakes off and goes airborne it's very hazardous if you inhale it.
My unit found quite a few of these at Ft. Cimarron ( Battalion 2000 ) in Panama during "Operation Just Cause". Our unit snipers liked them because of the full auto feature.
Thanks for posting this review Ian. I had a close service relation with the T65 system, more precisely the T65K2 variant. It does the job successfully in harsh environment of extreme high temperature/humidity/dirt low on maintenance. I found It some drawbacks of wich the most important the bore life, a mere 10.000 roundd, after that, the chamber starts to fail loosing its chromed lining. Also the buffer rubber I used to makeshift/replace with old tire manufacture. Well accurate with NATO SS109 bullet 1/9 twist. You actually can use standard M16A2 zeroing target with the system. Nevermaind dirt dust debris water mud, it will work from time to time neediing just a couple of drops lube on the piston tube. The loose handguard may be fixed with just a couple of plastic/tire tube rubber makeshifted washers. I keep the best memories of a dependable tool ready to do the job when required with almost none care.
I am pleased to finally see it in your channel. I heard a lot of complaints from the Panamanian military that after two mags the pencil barrel begins to twist and accuracy begins to abandon you. I have seen the furniture in dark green and brown. I have heard that some of them came with the Panamanian crest but I have never seen one with the crest. Ian keep doing your excellent job, congratulations!!👍
So soon as Ian brought up the Colt 703, I had to do a quick search to make sure I wasn't mixing it up with another model. I get to the site and low and behold, I've not seen this model before! Sweet, I start checking it out, the first thing I notice is the sling cutout in the stock like the WWSD one piece lower. Did you folks derive that design piece from that furniture?
Thanks for that detail, I figured that there was a reason for it. Especially since another company that made rifle stocks made their stocks similar, "Choate" if I'm not mistaken.
I really hope this means you'll be taking a look at the other AR derivatives made in the ROC/Taiwan. The T65 was the first in a series that currently culminates in the T91 rifle, the upper receivers of which are being exported to the US nowadays. They're a really fascinating little offshoot because they split off from the regular AR so early on, and I believe were the first military to adopt a piston AR.
18:10 Ian was super laid back about burning his fingers... when that happens to me, the first thing out of my mouth is something my kids shouldn't hear lol.
Great thanks to Ian brought back my bittersweet memory!! This rifle was my best friend during military service from 1989 till 1991. Not bad to shoot comparing with Type 57 but I heard from the gunnery sergeant that many of them suffered from accuracy issue because of unqualified gun barrel material been used (corrosion of rifling). But looking back today, most of it should be caused by incorrect maintenance.
Good to learn the details of the service rifle of my neighbor company, as a medic, we were issued M1 carbine and M16A1 instead. Heard a lot of complain about the build quality and accuracy of T65, but hey, whining is a way to drag you thru service time, maybe it's not all that bad.
I used to be a Taiwanese Soldier in Army. I retired from it for almost 24 years. Thank you for sharing this video, cause you recall my rookie period of the military career, which is an tolerating experience. The Type 65 rifle was a standard equipment of a rookie soldier at that time.
Ohh, this rifle brings back memories. It's brother, the T65K2 was the first ever firearm I've shot and also the most common one we've practiced on. I've also have the pleasure to try the T57, but in my mind the T65K2 was a lot easier to handle.
I think HKParts just sold out of these kits. Thanks Ian. In all seriousness I really enjoy your videos and I have learned a lot from you. Keep up the good work man!
Seeing this rifle made me smile. The handgurad of the rifle was terrible and it often fall apart when we were crawling on the ground. Many of these rifles have to use duct tape to make them stable. The corrosive ammunition also made things worse, with many barrels rusted and eroded to the point where the rifling was gone (This we call it 麻膛). It is also very hard to install the underbarrel grenade launcer on it because the connecting parts and screws are quite hard to tighten. Nevertheless, I think it is a good rifle, it can shoot well, it operates well. If you replace the handguard with a better one and put on a non-corrosive ammo, it can be a good rifle. A side note, we also tested the Steyr AUG. It was a courtesy from Steyr when one of the minster was visiting Austria. The Austrians let us produce the rifles for testing at a low price and we produced several thousand of them. It was called the T68 and was used by military police, special forces and airborne units. Some of the generals in the High Command wanted to replace the T65 with the T68 because it was not only more reliable and accurate, but also easier to maintain. The bullpup was welcomed and loved by the soldiers who could use it. However, we couldn't make a deal with Steyr and couldn't get a licence copy from them, which led to the cancellation of the T68 project.
It is so exciting to see my father's standard issued service rifle when he was in serverd of the ROC Marine Corps Though myself was ueing the T-91 which is now you can by in US named Wolf A1 uppers
I might send this video to my folks. My dad was in the ROC military just before this was adopted. I’ve wanted an in-depth look at this weapon for a long time. Taiwanese Florida man approves!
Reminds me of the Taiwanese T91 but in a 20in barrel. Ian have you looked into one of the tape on brass deflectors. I know that some are designed to use the modern brass deflector that is part of the upper receiver but it appears that some are conical in shape that will allow you to tape it onto a "slab" side thus creating a non permanent solution to left handed shooting.
Thanks Ian, that was fortuitous timing for me. I showed my young southpaw son who was asking why I tell him shoot (off bench) my BRN 601 with the right sholder when I yell at him to shoot his rifle off his left. Brunion bump good, brass to face bad.
I'm left handed and left eye dominant. I've always shot long guns right handed. At this point I've got enough muscle memory for it to not be a big deal and I've figured out how to manually adjust my eye dominance on a rifle. I did retrain myself to shoot pistols left handed though, that made a strong and immediate difference in my shooting.
@@wes11bravo #1 daughter is very right-handed, but left-eyed. She shoots everything lefty from muzzleloaders to competitive pistol. Her sister is exactly the reverse. Their brother is very right and right-eyed (he giggles a little). Dad's mixed-dominance, right-eyed, shoots righty unless weak-hand is specified. Mom would just shake her head at the whole bunch of us.
7:03 and the carry handle was added back on T65K2 with a proprietary scope mount for night vision scope that I have only heard of its existence in my service.
I really appreciate you letting us know what country/armed force the camo is from. Camo may not be a weapon, but it is a wonderful tool in the history of warfare, and I find the various patterns and their uses fascinating.
I'm from Taiwan. I just finish my mandatory military service. In the Recruit Training Center we still use T65K2. We do have a newer gun T91 for combat forces. Also there's a newer gun coming out called xt112.
Taiwan is pretty good with the whole gun thing. I still remember way back in the day when the "Made in Taiwan" sticker meant you'd just bought one of the nicer airsoft guns. The guns from Japan looked nicer, but the Taiwanese models had a more solid feel, and didn't top out at "indoor" speeds. I've still got my old 552 Commando model in my closet. It served through many hard fought matches with only a new barrel when I bought it, and a replacement piston later on it's life. If they are similar with their quality-for-price in real-gun manufacturing, then I sort of wish they'd export some.
In 1984, I served the army in Taiwan. During the exercise, my T65 magazine was loaded with 12 bullets. I usually sent 2 bullets to the 175-meter target, and the rest of the bullets were fired at the M60 machine gun’s targets to made some results. They were 300 meters away!
What a cool piece of history. When I was a kid I always wondered what these were, in fact, I would see this design in toys, and think they just didn’t copy the AR design correctly in the toy lol. I wish I had those cheap “Made in Taiwan” toys today
I read about the Taiwanese T65 AR-15 clone in a gun magazine over twenty years ago. The article's writer took the Taiwanese to task for cutting corners like omitting heat reflector shields inside the handguard and substituting silver paint. Ian shows the consequences of no heat reflector shields when he nearly burns his fingers touching the forward sight base after shooting three magazines. Ian also remarked on how warm the hand guard was becoming towards the front. It's clear that Taiwan made a number of foreign sales because their AR clone was far cheaper than the Colt M16A1. I don't know the actual dollar figures but I wouldn't be surprised if the T65 cost only half of the standard Colt M16A1. For customer nations, the T65 looking much like a M16A1 and functioning much like one plus the big plus of using M16 magazines made the T65 financially attractive. Even the AR18 lost out to Taiwan's T65 sales. At the time the AR-18 used a magazine that was identical to the M16 magazine but had a different catch notch so that the magazines were not interchangeable. I think that played a big role in countries turning down the AR18. The AR18 originated as a cheaper, easier-to-manufacture assault rifle that competed directly with the M16. The metal-stamped AR18 was America's direct counterpart to the metal-stamped AK-47.
1. T65K1 and T65K2 are two other T65 variants adopted by the Taiwanese military. 2. T65K1 doesn't have a carry handle, but T65K2 has one. 3. Both K1 and K2 variants are still used by reserve units and in basic training. 4. The handguard is often loose due to wear, but overtightening the screw holding the upper handgaurd can cause the tip of the screw to press onto the piston, creating malfunctions. The screw is located right on top of the piston. 5. Point 4 is one of the reasons that T65K3, the carbine variant of T65, was never adopted. The Taiwanese military opted for the T91 rifle with a redesigned piston and handguard. 5. The rear night sights of T65K2 rifles are often missing and not fixed.
One other use of the catty handle was the snap on brass deflector. It worked on the Colt made M16A1. It did not work on the H&R made M16A1. There was dlightly more space between the top of the receiver and the under side of the carry handle.
I carried an H&R in the late 1980s. I am not left handed so I did not know the brass deflector did not fit. I am fairly certain based on the condition the rifle had been a rack queen for most of its existence. Upper and lower still fit very tight compared to many of the other M16s in the arms room.
@@shawnr771- I went through BCT in the mid 80s and my mix master weapon had an XM16E1 lower and barely any parkerizing left on the barrel, which was shiny bare steel! It did rattle really nice when doing the Manual of Arms though...
@@wes11bravo I was a unit armorer we had lower receivers with all sorts of crazy stampings. That is how I found the H&R in the HQ platoon section. Until I was issued an A2 four years later it was the best rifle I shot in the Army.
My friend has 1 of the original T65 in the US. It was brought in by Colt to investigate if it violated Colt's patents. I have pictures in high detail if you want to see markings.
I noticed that one lacks a part every other T65 I've ever seen has, it screws into the front sight base basically under the night sight when it's flipped down. Does he know what it's missing? Does it shoot reliably? It's a very tight screw thing, definitely not adjustable gas in my opinion.
He doesn’t.
@@dmoney8602 "Gun enthusiasts don't know other gun enthusiasts, nothing ever happens"
It's been one hour since OP posted his offer, too early to know. On top of that, private messages also exist...
@superfamilyallosauridae6505
It's the gas hole screw. The ROC military issued a combination tool to each of these rifles. You can use this tool to take down the gas hole screw and use a scrapper to clean all the carbon residuals. Also the gas tube can be taken down with the tool.
Add a little information.
The Taiwanese Army did a test to compared the AR-18 with the AR-15. They believed that the AR-15 was more accurate and easier to shoot, but the AR-18 was more reliable (considering the ammo at that time used corrosive primers, etc.), so they finally made the decision was to transplant the gas system of the AR-18 to the AR-15.
The looseness of the old handguard was never resolved on the T65 rifles, as the design required frequent removal of the handguard to clean the gas system. (The same goes for HK416)
The T91's gas system is designed to can be taken out for cleaning without dismantling the hand guard, which is to completely solve this problem.
A comparison can be made to the Wolf A1 Upper which is available in the US.
Was it really for reliability or to dodge the problem of licensing production? Colt actually had a T65 imported to sue for patent violation, but Colt lost because of the gas system being different. That one T65 transferable machinegun is out there.
They copied AR-18 first, but switched to T65 prototype without giving any reason. Only later we learned that AR-15 style rifles, piston or not, aced in mud tests. Mud is plentiful in Taiwan.
@@superfamilyallosauridae6505read the comments. the guy who (claims he) has it is there
It's conceptually similar to the BRN-180 upper from Brownell's. Mate an AR-180 upper to an AR-15 lower.
Yeah, during my military service, we have to like loosen the handguard screw so that the gun won't jam up so frequently.
But it jams anyway, and our ammo is still corrosive (
BTW, we are still using the T65K2
Even with the improved handguards with heat shield, they burns after a mag, and we have to share guns at the range, so when I got the rifle, the handguard immediately vaporize my sweat on my hands
Holy cow. I've never imagined Ian reviewing this one because how scarce it is outside of TW. Cheers from Taipei!
Not really if you are willing to fish out $1200 for a kit, which you will have to pay extra to fix and put it together. IMHO, the ROC Bureau of military equipment should just make sporterized Type 57 with forged receivers and cold hammer forged, chromelined barrels and sell them to the US.
Lol we have 6 at work.
@@ChaohsiangChenm14 production tooling somehow went to china. I suspect treason
@@ChaohsiangChen Why the hell would we want it sporterized?
@@superfamilyallosauridae6505
We don't. It has something to do with stupid US laws, called 922r compliance.
It’s a love and hate feelings for me - I used to hold this gun for at least 6-7 hours a day (2 watches per day, if not 3) for 2 years when I served the army in Taiwan. I was also trained with M14 (type 57) for the boot camp. They are like my missing limps and I can still feel the weight of these rifles in my hands😂
Like in the song "Karavan" by russian musician Aleksandr Rozenbaum, when talking about going back to civilian life during the Afghan conflict: "You'll never get used to the feeling of your shoulder being free from the weight of an AKM"
I have served compulsory military serive for almost two years as a Staff Sergeant in an infantry Devision in Taiwan's Army. It was from 1989 to 1991 and the Battalion was one of the battle-ready units always ready for action within hours. During that time, my unit's standard personal weapons were this exact T-65. The flimsy hand guard, and the worn out pistal grip in the video brought back a lot of old memories! During some training /testing sessions, I had some chances to use US made M-16 for target practice. Main impression for me is that the cross section of the US made M-16 is tri-angle and lighter in weight. Personally, I think the M-16 is well made and had less feel of recoil. On the other hand I consider the T-65 is a rugged rifle perfect for a conscripted army. It shoots as good as a M-16 in my personal opinion.
In my company's armory, there are also some US made M-14s (all with synthetic stocks), Taiwan made M-14 clone (all with wooden stock, called T-57). M60 machine gun, the one used by Rambo, were equipped for every infantry platoon. The officer's side arms were US made 1911 45 cal. Since I am in command of a platoon in Battalion HQ company, we got a Browning 50 cal for both airdefense and fire support. That was a blast to shoot 8-).
As a Taiwanese, I hope Ian can also review T86 and T91 to see the improvement of our rifles. Or maybe even our T85 underbarrel grenade launcher
You can petition it to the bureau of military equipment to host a visit, but you know they'd rather have one less task to deal with unless there's some money to be made.
Maybe Chris from Small Arma Solution has better access, since he seems to have done some industry consulting jobs before.
T91 uppers are being exported to the US, so it's definitely possible he could get his hands on one of those.
Military Arms Channel has already done T91 in depth... ruclips.net/video/lQQBo0LDpII/видео.html
I believed someone did clone the whole ass upper+lower receiver of T91 along with the marking, or just get a wolf a1, they are the same stuff.
@matchc0635
Except you don't get the CHF chronelined barrel made by Arsenal 205th. Some Wolf A1 upper had some headspace issue as demonstrated by CRS firearms. Definitely barrel and barrel extension issue cuz I encountered it myself when sourcing cheap AR parts. Never buy cheap in-house brand barrels and BCGs again.
I'm a Taiwanese and did my service with this rifle(K2 ver). Though we moved to T91 recent years, still T62K2 is more accurate in the field and largely used. Cheers from Kaohsiung, nice shirt btw.
Cheers！歡呼吧！
台灣人來報到啦！
I used to held this rifle once in my military service, but then I was using t65k2after that and never touch this type of rifle.
Thanks for Ian who introduce this gun!
歡呼再一次喔！
新訓的槍大部分都還是65k2連打靶也是,我是陸戰隊的
Most training center still using 65k2 even shooting practice ,I was serving in marine
A man from Taichung come here to report！
新北的來簽到
我當兵都是用65，上成功嶺用過57
taiwnese here, we still use t65 for education in schools and bootcamp as part of the basic training
Based
As a Taiwanese myself, I really thank you for taking a look at this gun, living in Taiwan, we tented to think the T65 series of guns are just big ol pile of junks, but your detailed look at this thing really shed a new light on it for me.
By the way, T65s are still largely use in Taiwan til this day in training purpose and reserve, the medical school I studied in even has its own stock pile of deactivated T65s for national defense education class, to teach students the basics of how to operate an AR pattern rifle.
I prefer T65 over Norinco M16
@@Lonewolf-930 the only norinco gun I would consider is the sks they made
I'm not Taiwanese. The farthest thing from it geographically: I'm Paraguayan (Paraguay is one of the few countries on earth that still recognizes taiwan as the "real" china). This is our main assault rifle as well. It did it's job well AFAIK. I'm glad it has been finally covered in this channel.
Glad my country can help your country out, and we do talk a lot about Paraguay being one of the very few allies we have, every time we talk about allies on the news, we have to mention you guys, we are proud of it.
T65K2s, or plain jane no carry handle T65s?
@@4tomic5hark Likewise friend, likewise. Hopefully we can all live in peace with our true nationalities without fear of persecution of being threatened by another nation someday.
@@superfamilyallosauridae6505 Both. Assault rifles were too rare (Edit: Too rare HERE) and we basically took all we could. The idea was bringing K2s, but we took some "normal" T65s as well. Case of beggars can't be choosers.
Great video. When I went through basic in '85, lefties used clip-on brass deflectors at the range. Lefties who didn't...ended-up with hot casing burns on them!
I thought we all use brass capture because stooopid orders to collect all brass.
A clip-on brass-deflector sounds like a very clever idea, doesn't require any alterations to the existing tooling, or permanently modify an existing item, and could be made of thinner and cheaper material than the rest of the upper.
Bang - OW
Bang - OW
Bang - OW
Bang - OW
Bang - OW
As Ian's beauty mark gradually grows more defined. Quality programming. A+ no notes
it's kinda funny that at the same time the mainland also adopted a short-stroke AK
Convergent evolution.
And now a short stroke AR too, the QBZ-191
With lots of neat internal features. 191, QJS161 are very cool guns.@@Nathan-jh1ho
Chinese love short stroke for some reason.
QBZ-03?
6:18 No the radioactivity is still there but the paint degraded and is not producing light anymore. Radium226 is still producing gamma rays.
You never really know unless you lick it and check if it stings.
@@radomaneexactly
He said at the beginning of the video that this was a replica, so I think it is self explanatory that it does not contain radium paint.
@@garrysekelli6776 If it's a parts kit, then it likely was if radium is what they originally used.
When did he say it was a replica? This is a real T65, the only things not original are the lower receiver, barrel, and trigger pack. It's a parts kit gun from South America.@@garrysekelli6776
Taiwan gave a bunch of these to the Haitian National Police in the late 90s, early 2000s. They're still in service to this day, with the M14 and the newer Galil ACE.
Funny enough, I've NEVER seen them with a carry handle. I didn't think they had one.😮
You beat me to it
@@aregularperson7573 I jumped on as soon as I saw the notification. 😅
I remember looking at videos of Haitian cops using the ACE, it reminds me of our cops in the Philippines using them
有哦! 後來生產的型號就有加上提手唷!
尤其是被第一線部隊的使用者痛罵「這是那個蠢貨設計的爛槍」後....
@ReinKayomi Phillipines Police uses them too? That's pretty cool. There's getting very popular here in Latin America. They're standard issue in the Colombian and Chilean Armed forces now, I know Honduras and El Salvador uses them too.
The design gently encourages left-handed shooters to be right-handed shooters.
"gently"
"encourages"
It's clearly designed to give that healthy red glow on your cheek.
Is that because there's no case deflector?
@@george2113 The left-handed shooter's face is deflector enough.
Props to Ian for sacrificing his cheek to demonstrate left-hand shooting 😊
52 years later, I have now learned why my M-16 in Basic Training had that stupid "carry handle". Which we were strongly discouraged from using by that description.
Yeah, it's a very military thing to do. It's like when I was in the Marines and we weren't allowed to carry a pen in the built in pen pocket in our BDUs. Instead, we could only carry a pen clipped to the inside of the blouse on the strip of fabric where the button holes are.
@@Riceball01 Why was that?
@@ajeje1996 I have no idea, it was just something that we were told early on, maybe as early as boot camp. I've always suspected that it was to be contrarian because maybe the Army allows their people to put their pens in the pen pocket. The Army rolled their sleeves up with the outside showing so we roll them straight up with the inside showing, they tuck their pants into their boots so we blouse them on the outside. I don't know if we or the Army actually did these things to be different from each other, but it sure seemed like it to me.
@@ajeje1996Because walking around with a Pen sticking out of your Cammies looks like sh*t.
He would just happen to have a Taiwanese marine corps camouflage outfit. I like to imagine he has a huge wardrobe with big swing-out doors. Does he have a redcoat uniform? When he inevitably reviews laser and plasma rifles, will he have XCOM gear?
We all know he's got a suit of USCM armor for when he gets to play with an M41A pulse rifle or an M56 Smartgun.
In any case, he would have a suitable "hat" in his collection in case he doesn't have enough equipment for a "full cosplay": ruclips.net/video/pvi1u1U_h1g/видео.html
It always made me laugh when he said he was gifted a few Irish Army hats, but didn't have a chance to wear them on screen because he didn't have an iconic Irish firearm to pair with it... except the AR-180. Which would be too spicy of a choice lol
Probably has a deerskin for when he reviews the Mk 1 Bow.
Didn't Ian dress up as a wastelander when he was doing cross-promotion with the one RUclipsr who was talking about the fallout series? it wasn't a vault suit but he put in the effort.
I can send him one but he will have to pay me.
Props to Ian for sacrificing his cheek to demonstrate left-hand shooting . I really appreciate Ian's knowledge and respect for Chinese cultural history..
As a lefty who's had hot 556 mm brass hit me in the face and go down the front of my shirt I salute Ian for being willing to do that for the camera.
When I was in Taiwan in 1988, I saw them carrying what I thought were M-16s. I see I was wrong. Thanks for sharing. 😎👍
Though some Taiwan Army troops did use M-16 rifles, though the quantity was not a lot compared to Type 57/65 rifles.
The M16 rifle were used by the Airborne and special forces in the 80s
Back in early 2000s when I served in Taiwan military, my unit was equipped with M-16A1/AR-15, they were pretty old since they were replaced from front line troops, and my unit only handled logistics, no facing immediate combat for our missions.
Yes, some "M-16s" in my unit did marked as "AR-15", but in general we just referred them all as M-16. And rumor has it that some M-16 in my unit was shipped to Taiwan right after Vietnam war, they had probably killed enemies in the battlefield.....
好懷念喔…本人服役期間就是用這把T65步槍
Finally, some Taiwanese guns!
I'd been searching for some historical videos on the type 91 and realized Forgotten weapons hadn't covered either the t65 or t91. What a nice coincidence for this to show up on my feed right after.
I'm hoping that he can cover a T91 soon. T91 upper receivers are actually being imported into the United States directly from the original manufacturer now, so T91s are now a lot easier to find.
Yeah, Ian really needs to get hooked up in East and Southeast Asia. Probably not mainland China for various political reasons, but places like Taiwan, Japan, Indonesia, and Singapore all have some interesting small arms that aren't well-documented outside their countries.
YES! Thank you for shedding light on this rifle! As someone who calls Taiwan a second home, it gives me great joy to see an indigenous design being featured. Appreciate your work on this video. Please tell me there is a T-91 video in the works. Oh and Ian looks SWAGGY in them Taiwanese camo.
I'm so glad this rifle made the review schedule! I went with an 80% A2 lower because I couldn't find an A1( Thanks for selling out Nodak)
I did get it engraved in Mandarin, and it looks cool. I replaced all the parts ( except the bolt carrier group), repainted inside the hand guard with metallic paint, and added an anti tilt buffer.1 in 7 pencil barrel let's me shoot MK 262 and she groups around 2 MOA
All in all, it's a great rifle!
I'm Taiwanese and had to do mandatory service like many others my age at the time. We did months of basic training with these T65s. Compared to the T91 that we got later on after boot camp, T65s are heavier, harder to clean and disassemble, and would jam a lot more often. Safe to say I do not miss this gun, doing the bayonet drills with this thing was a real pain lol.
15:59
射手就位
臥射預備
六發裝子彈
左（右）線預備
全線預備
開保險
開始射擊
I'm from Taiwan, my father used the early production of T65 in his service, says it was too easy to break stock during exercise, but didn't mention about heat problem。
And I used the T65k2 as high school shooting training, there are still a lot of T65s (most of them are k2) operating in the police and logistics forces。
As of 2023, the T65 is still used for bootcamp marksmanship training for the conscripts. I definitely remember there being a carrying handle though. The fire selector was marked S, 1, 3, A. Great video!
but more K2 type
T65K2 has carry handle
Very nice video & history. I wasn't aware the Garand & M14 had rotating sling swivels, and now I'm mad it was omitted on the M16A1. During Marine training, we were required to surmount several obstacles, and run some courses with the M16 slung over our backs. A number of us developed semi-permanent sores on the upper left back from friction with the forward assist. Rotating swivels? Yes, thanks!
If that's radium painted even if they no longer glow they might still be horribly radioactive, radium has a half life of 1600 years, so it's gonna still be pretty hot after 50 or so years since when it was painted, radium paint tends to stop glowing not because it's no longer radioactive but because it eats into the phosphor it was mixed with so it doesn't react with anything.
If you test it with a Geiger counter etc and it does tick away, might be worth cleaning it off safely, if the old paint flakes off and goes airborne it's very hazardous if you inhale it.
My unit found quite a few of these at Ft. Cimarron ( Battalion 2000 ) in Panama during "Operation Just Cause". Our unit snipers liked them because of the full auto feature.
Right cheek brass deflector. Ouch. Thanks for the video and the sacrifice.
Thanks for posting this review Ian. I had a close service relation with the T65 system, more precisely the T65K2 variant. It does the job successfully in harsh environment of extreme high temperature/humidity/dirt low on maintenance. I found It some drawbacks of wich the most important the bore life, a mere 10.000 roundd, after that, the chamber starts to fail loosing its chromed lining. Also the buffer rubber I used to makeshift/replace with old tire manufacture. Well accurate with NATO SS109 bullet 1/9 twist. You actually can use standard M16A2 zeroing target with the system. Nevermaind dirt dust debris water mud, it will work from time to time neediing just a couple of drops lube on the piston tube. The loose handguard may be fixed with just a couple of plastic/tire tube rubber makeshifted washers. I keep the best memories of a dependable tool ready to do the job when required with almost none care.
我在台灣服役期間
新訓期間是使用T65K2
進入部隊後
是使用解封的T65
比較之下 我比較喜歡T65
因為他比T65K2
更輕230公克
在台灣軍隊
刺槍的訓練時間
比射擊還要長
所以槍托才會設計成這樣.......
I am pleased to finally see it in your channel. I heard a lot of complaints from the Panamanian military that after two mags the pencil barrel begins to twist and accuracy begins to abandon you. I have seen the furniture in dark green and brown. I have heard that some of them came with the Panamanian crest but I have never seen one with the crest. Ian keep doing your excellent job, congratulations!!👍
So soon as Ian brought up the Colt 703, I had to do a quick search to make sure I wasn't mixing it up with another model. I get to the site and low and behold, I've not seen this model before! Sweet, I start checking it out, the first thing I notice is the sling cutout in the stock like the WWSD one piece lower. Did you folks derive that design piece from that furniture?
We were taught to grab the stock when doing bayo drills. The reason for the shape of the stock is self-evident.
Thanks for that detail, I figured that there was a reason for it. Especially since another company that made rifle stocks made their stocks similar, "Choate" if I'm not mistaken.
Welp, parts kits just got way more expensive…
On a serious note, thanks Ian for all you do for the firearms community!
2:30 Just a note only Taiwan still uses the "Year of the Republic"
I really hope this means you'll be taking a look at the other AR derivatives made in the ROC/Taiwan. The T65 was the first in a series that currently culminates in the T91 rifle, the upper receivers of which are being exported to the US nowadays. They're a really fascinating little offshoot because they split off from the regular AR so early on, and I believe were the first military to adopt a piston AR.
嗨，槍爸爸回來了
我還是要說，65K2 在台灣仍然在服役，不算是被遺忘的武器啦
喔 ，還有 1949年內戰並沒有結束，技術上來說，國共內戰目前還在持續中，雙方並沒有任何和解或是停戰條約
18:10 Ian was super laid back about burning his fingers... when that happens to me, the first thing out of my mouth is something my kids shouldn't hear lol.
The “ two China” description is really precise in my opinion as a Taiwanese
Great thanks to Ian brought back my bittersweet memory!! This rifle was my best friend during military service from 1989 till 1991. Not bad to shoot comparing with Type 57 but I heard from the gunnery sergeant that many of them suffered from accuracy issue because of unqualified gun barrel material been used (corrosion of rifling). But looking back today, most of it should be caused by incorrect maintenance.
In 1989 during Operation Just Cause in Panama, we captured a decent amount of these rifles from the Panamanians.
I'm from Panamá.
And the PDF (Panama Defense Forces) carried a large mix of weapons, like some AKMs, M16a1s, FN FALs and the T65.
You have to respect a man who sacrifices his face to hot brass to prove a point.
Good to learn the details of the service rifle of my neighbor company, as a medic, we were issued M1 carbine and M16A1 instead. Heard a lot of complain about the build quality and accuracy of T65, but hey, whining is a way to drag you thru service time, maybe it's not all that bad.
I used to be a Taiwanese Soldier in Army. I retired from it for almost 24 years. Thank you for sharing this video, cause you recall my rookie period of the military career, which is an tolerating experience. The Type 65 rifle was a standard equipment of a rookie soldier at that time.
Ohh, this rifle brings back memories.
It's brother, the T65K2 was the first ever firearm I've shot and also the most common one we've practiced on.
I've also have the pleasure to try the T57, but in my mind the T65K2 was a lot easier to handle.
I think HKParts just sold out of these kits. Thanks Ian.
In all seriousness I really enjoy your videos and I have learned a lot from you. Keep up the good work man!
Congrats on the purchase! Super cool piece to own :)
Seeing this rifle made me smile. The handgurad of the rifle was terrible and it often fall apart when we were crawling on the ground. Many of these rifles have to use duct tape to make them stable. The corrosive ammunition also made things worse, with many barrels rusted and eroded to the point where the rifling was gone (This we call it 麻膛). It is also very hard to install the underbarrel grenade launcer on it because the connecting parts and screws are quite hard to tighten. Nevertheless, I think it is a good rifle, it can shoot well, it operates well. If you replace the handguard with a better one and put on a non-corrosive ammo, it can be a good rifle.
A side note, we also tested the Steyr AUG. It was a courtesy from Steyr when one of the minster was visiting Austria. The Austrians let us produce the rifles for testing at a low price and we produced several thousand of them. It was called the T68 and was used by military police, special forces and airborne units.
Some of the generals in the High Command wanted to replace the T65 with the T68 because it was not only more reliable and accurate, but also easier to maintain. The bullpup was welcomed and loved by the soldiers who could use it. However, we couldn't make a deal with Steyr and couldn't get a licence copy from them, which led to the cancellation of the T68 project.
However, IIRC, copyright infringement isn't really a big deal in ROCA anyway, right..?
@@tomau0506 We care about it more than the PLA
K1真的材質有瑕疵、瓦斯氣缸跟調整螺絲常繡實。K2改進些。刺刀換短了。
這把65 K1步槍是我下部隊的惡夢，更早之前的57步槍雖然後座力大，但準度真的值得稱讚
看這款應該是外銷的T65 不是改良版的K1主要要看有沒有夜間覘孔瞄具還有護木內有沒有隔熱片 背帶扣環會不會左右搖晃 前端護木螺絲鎖是不是凸的 如果上述這些沒有那就是元祖的T65
If I remember correctly, at Reed Knight's museum there are several original prototype AR-10s and AR15s and at least one of them was a piston gun.
Daewoo rifle... I wish those could be imported again... such a wonderful rifle..
It is so exciting to see my father's standard issued service rifle when he was in serverd of the ROC Marine Corps
Though myself was ueing the T-91 which is now you can by in US named Wolf A1 uppers
that sling swivel's a really nice touch.
I might send this video to my folks. My dad was in the ROC military just before this was adopted. I’ve wanted an in-depth look at this weapon for a long time. Taiwanese Florida man approves!
Reminds me of the Taiwanese T91 but in a 20in barrel. Ian have you looked into one of the tape on brass deflectors. I know that some are designed to use the modern brass deflector that is part of the upper receiver but it appears that some are conical in shape that will allow you to tape it onto a "slab" side thus creating a non permanent solution to left handed shooting.
Ugh. God. Another rifle I didn't know I needed. Thanks Ian
Thanks Ian, that was fortuitous timing for me. I showed my young southpaw son who was asking why I tell him shoot (off bench) my BRN 601 with the right sholder when I yell at him to shoot his rifle off his left. Brunion bump good, brass to face bad.
I'm left handed and left eye dominant. I've always shot long guns right handed. At this point I've got enough muscle memory for it to not be a big deal and I've figured out how to manually adjust my eye dominance on a rifle. I did retrain myself to shoot pistols left handed though, that made a strong and immediate difference in my shooting.
My dad was this way. Lefty but was taught as a kid to "just shoot right-handed. It'll save you a lot of trouble later..."
@@wes11bravo #1 daughter is very right-handed, but left-eyed. She shoots everything lefty from muzzleloaders to competitive pistol. Her sister is exactly the reverse. Their brother is very right and right-eyed (he giggles a little). Dad's mixed-dominance, right-eyed, shoots righty unless weak-hand is specified. Mom would just shake her head at the whole bunch of us.
Love to see Taiwan been represented. Most of the typical army conscripts of the time don't get enough practice rounds to worry about heat.
Yes! I've been waiting for this video
7:03 and the carry handle was added back on T65K2 with a proprietary scope mount for night vision scope that I have only heard of its existence in my service.
*"Rifle 5.56mm"*
Thanks lower receiver. For a moment I thought it was a *"Shotgun 12 gauge"*
Ian.. Thanks for taking several for the team.. Nice cheek tat.💪😎
I really appreciate you letting us know what country/armed force the camo is from. Camo may not be a weapon, but it is a wonderful tool in the history of warfare, and I find the various patterns and their uses fascinating.
Late upload. A suprise to be sure, but a welcome one.
I’ve been waiting for this one.
finally got to one of your videos within 10 mins of posting.
Costa Rica still have some of T65s at service, they where replaced for Sigs 516
I've been waiting for this video for a long time. So cool to finally learn about this neat AR platform!
I'm from Taiwan. I just finish my mandatory military service. In the Recruit Training Center we still use T65K2. We do have a newer gun T91 for combat forces. Also there's a newer gun coming out called xt112.
Taiwan is pretty good with the whole gun thing. I still remember way back in the day when the "Made in Taiwan" sticker meant you'd just bought one of the nicer airsoft guns. The guns from Japan looked nicer, but the Taiwanese models had a more solid feel, and didn't top out at "indoor" speeds. I've still got my old 552 Commando model in my closet. It served through many hard fought matches with only a new barrel when I bought it, and a replacement piston later on it's life. If they are similar with their quality-for-price in real-gun manufacturing, then I sort of wish they'd export some.
It took me a moment to figure out the "ow!" lol Thank you Ian for taking the punishment.
I like it...The sights and the sling swivels alone make it decent
I am a sergeant of the armored corps
65K2 was the newly issued rifle when I served in the military. Very accurate when shooting
In 1984, I served the army in Taiwan. During the exercise, my T65 magazine was loaded with 12 bullets. I usually sent 2 bullets to the 175-meter target, and the rest of the bullets were fired at the M60 machine gun’s targets to made some results. They were 300 meters away!
The rifle incentivizing Ian to shoot right handed is almost cute. 14:52
best part about this rattly old thing : )
Man, something about this rifle just... It _looks_ right, absolutely beautiful, like what a rifle "should look like"
18:09 Sorry Ian, but that made me laugh.
Very Good😊In my country,we call this type is”65k1”;and new T65 (have Lift handle,like M16A2）,call the “65k2”.
Ian's face makes a great shell deflector🤣🤣
Cheeky.....
What a cool piece of history. When I was a kid I always wondered what these were, in fact, I would see this design in toys, and think they just didn’t copy the AR design correctly in the toy lol. I wish I had those cheap “Made in Taiwan” toys today
歷史講得很正確，甚至比很多台灣人都厲害
that is t65k1? watching this video has brought me back to the memories of my military service. cheers from Taipei Taiwan.
this rifle is so cool. and the bdu's are pretty awesome too there ian!
I read about the Taiwanese T65 AR-15 clone in a gun magazine over twenty years ago. The article's writer took the Taiwanese to task for cutting corners like omitting heat reflector shields inside the handguard and substituting silver paint. Ian shows the consequences of no heat reflector shields when he nearly burns his fingers touching the forward sight base after shooting three magazines. Ian also remarked on how warm the hand guard was becoming towards the front.
It's clear that Taiwan made a number of foreign sales because their AR clone was far cheaper than the Colt M16A1. I don't know the actual dollar figures but I wouldn't be surprised if the T65 cost only half of the standard Colt M16A1. For customer nations, the T65 looking much like a M16A1 and functioning much like one plus the big plus of using M16 magazines made the T65 financially attractive. Even the AR18 lost out to Taiwan's T65 sales. At the time the AR-18 used a magazine that was identical to the M16 magazine but had a different catch notch so that the magazines were not interchangeable. I think that played a big role in countries turning down the AR18. The AR18 originated as a cheaper, easier-to-manufacture assault rifle that competed directly with the M16. The metal-stamped AR18 was America's direct counterpart to the metal-stamped AK-47.
Ian burning his finger and saying "ahhh, toasty" should be a meme. He had me crying with that one
1.
T65K1 and T65K2 are two other T65 variants adopted by the Taiwanese military.
2.
T65K1 doesn't have a carry handle, but T65K2 has one.
3.
Both K1 and K2 variants are still used by reserve units and in basic training.
4.
The handguard is often loose due to wear, but overtightening the screw holding the upper handgaurd can cause the tip of the screw to press onto the piston, creating malfunctions. The screw is located right on top of the piston.
5.
Point 4 is one of the reasons that T65K3, the carbine variant of T65, was never adopted. The Taiwanese military opted for the T91 rifle with a redesigned piston and handguard.
5.
The rear night sights of T65K2 rifles are often missing and not fixed.
Thank you so much for showcasing Taiwan rifle. God bless and much thanks! Love from Taiwan~
Ian, the human brass deflector. Took a few for the team.
Wow, that bolt carrier and bolt look exactly like my LMT carrier on my r20
One other use of the catty handle was the snap on brass deflector. It worked on the Colt made M16A1. It did not work on the H&R made M16A1. There was dlightly more space between the top of the receiver and the under side of the carry handle.
I carried an H&R in the late 1980s.
I am not left handed so I did not know the brass deflector did not fit.
I am fairly certain based on the condition the rifle had been a rack queen for most of its existence.
Upper and lower still fit very tight compared to many of the other M16s in the arms room.
@@shawnr771- I went through BCT in the mid 80s and my mix master weapon had an XM16E1 lower and barely any parkerizing left on the barrel, which was shiny bare steel! It did rattle really nice when doing the Manual of Arms though...
The Colt I was issued in the 70s twice was shiny both barrel and receiver. The barrel was shot out. A 3 inch group at 25 meters was as good as it got.
@@wes11bravo I was a unit armorer we had lower receivers with all sorts of crazy stampings.
That is how I found the H&R in the HQ platoon section.
Until I was issued an A2 four years later it was the best rifle I shot in the Army.
I really like my piston gun. The bolt carrier and bolt don’t really get that hot after a 20-32 round string. I like the recoil impulse too.
Republic of Korea's K-2 , AKA Dawoo 200, was also a piston driven AR. Great vid, as ever.
K2 is more AK than AR. Just like FN FNC
You nailed the "Au contraire", GG !