THANK YOU THANK YOU THANK THANK YOU THANK YOU THANK YOU THANK YOU !!! I am new to lychee slicer, and resin printing. I know everything there is to know about filament printing, so you helped me immensely. I have been struggling with this for two weeks now.
Thank you for introducing the idea into my head to import a model of a certain size!! I want to print 1/12th scale doll furniture for a 1/4th scale doll (roughly 40-45cm) and math is not always my friend. lol.
@@popeadam25000 Sure I'm happy to offer basic advice and or troubleshooting. However, if more than the basics are required I recommend joining my Patreon at the Red Scale Tier. That allows me to set time aside to offer you 1 on 1 3D printing support with much faster response times. You also get some other fun benefits too. 😊 Slice Print Roleplay links, linktr.ee/Sliceprintroleplay
Hello. I have a Tina2s printer for my kids to start. We use Pikaslice with it. My question is, while creating it looks like I do the max measurements, but the 3-D print still comes out extra small? Why?
I just found your Channel, I immediately subscribed, I'm new to 3D Printing, and I Recently got a Resin Printer, I understand I can Resize Miniatures from one Size to another, but, I just have one question, I can't seem to figure out Regarding Resizing. Im aware the bigger I scale the more Polygons will be Required for The Structure to keep The littlest of Details, due to reshaping of the Print, (Forgive me if I'm not accurately Right with Polygon naming or terminology) I wanna upscale a 32mm Miniature into a 6-10 inch Model, but I am Worried they will just look like Blobs of Details. Is there a way I can Restructure and Gain the Details without Losing the Detail? What kind of advice would you recommend? I don't even know where to Begin, when it comes to Restructuring the Finest bit of Details, what kind of Softwares would you recommend for a Beginer when it comes to this kind of Thing?
First off, thank you for subscribing. It's always appreciated! Now onto your question. When you scale a model up your slicer should give you a decent idea of what it will look like. That should give you some indication of how a model will look after it's been scaled up. You are correct that at a certain point when a model is scaled up the details will start to get a bit blocky. However, how big you can make a model before that becomes an issue will depend on each model. Some models have an incredible amount of detail and you can scale them up quite high before noticing any issues. Others will be more apparent at much smaller scales. So I'd scale up a model in your slicer and see how it looks. If you don't see any obvious issues maybe just try printing the head at that scale to confirm before committing to the whole model. As for remeshing a model. That can certainly be done, but it will take a fair bit of practice to learn the process. I'd recommend getting Blender for that. It's a really powerful free program. And it has a large user base so there are lots of tutorials available. If you want more specific help I'd highly encourage you to join the Slice Print Roleplay Facebook group and ask questions there. I'm lucky enough to have made friends with quite a few 3D artist and they are all great about giving advice. Let me know if I can do anything else to help you on your journey. I'm excited to see what you come up with. 😊
So is there a quick way to lock in a %? I have a bunch of demon models that are supposed to be about 8-10ft tall but they're coming out closer to 5-6ft (according to Scalesby). Is there any easy way to simply make the model 20% larger without having to drag the slider around? I noticed there's 3 100-values for XYZ. Would I increase each to 120 to achieve this?
@@clickbait9125 yep you can absolutely do that. Make sure Unifom Scaling is checked then increase any of the 3 values (X, Y, Or Z) and the other two will be increased by the same value to keep everything unifom.
No need to apologize. It takes a bit to figure this all out. Yep! Whether you're using an FDM/filament printer or a resin printer, your slicer should allow you to scale your models. Just don't make them bigger or smaller than what your printer can handle.
@SlicePrintRoleplay Would this software be better than Eleegons? I'm noticing that it's a bit rough to work with and her it looks smoother. The subscription worth it? And thank you for the reply!!!
thank you so much! i bought an STL and it said it "could" go from 1/8 to 1/12 and i was like oh sweet--but i didnt check the scale before printing and my print was like FOUR INCHES TALL and now all her companions are at 10 inches just looking down at her like 🤨🤨
Haha yeah that does make things a bit awkward. 🤣 It's odd that they didn't all come from the artist in the same scale. But in any case, I'm really glad to this video helped you. 😊
I keep trying to input my own numbers cause I hella need the print to line up but it keeps resetting or changing the numbers and I have been frustrated trying to figure out how to turn it off..
@@iceypies2791 should be in the video description and on my channel home page as well. But here are all my links just so they're easy to find. linktr.ee/Sliceprintroleplay
I'll make you a deal. I'll try to get into the topic of a video in under 1:25 from now on. In return, you check the description for time stamps next time you're board with a video.
Hello. I have a Tina2s printer for my kids to start. We use Pikaslice with it. My question is, while creating it looks like I do the max measurements, but the 3-D print still comes out extra small? Why?
I'm unfortunately not familiar with that printer or that slicer. I'd recommend looking at the values for the X, Y, and Z. It's very hard to judge how large something is just based off of how it looks.
I can not believe it took me this long. Thought I was gonna have to get a degree in 3d modeling just to scale these. Thank you so much!
That's awesome to hear! Glad this video helped make things easier to understand. 😊
Absolutely fantastic. You make it so simple. I have been struggling with this for more than a month. THANKS!!!
@@danielmg2213 I'm so glad to hear that!
THANK YOU THANK YOU THANK THANK YOU THANK YOU THANK YOU THANK YOU !!! I am new to lychee slicer, and resin printing. I know everything there is to know about filament printing, so you helped me immensely. I have been struggling with this for two weeks now.
On that's awesome, I'm glad this video helped you. 😊
Thank you for introducing the idea into my head to import a model of a certain size!! I want to print 1/12th scale doll furniture for a 1/4th scale doll (roughly 40-45cm) and math is not always my friend. lol.
Oh I totally understand that. I love being able to just drop in a reference model like this.
So glad it helped you. 😊
Awesome, exactly what I was looking for
Glad to hear it!
Thanks was exactly what I needed
Glad to hear that!
This was really helpful. Thank you.
That's what I like to hear! Glad it helped you. 😊
Thanks much hope to use this with my new printer to make terrain at 32mm too
Just what I need for recalling my 1/48 scale mech models to 1/35 scale size.
Glad to hear it!
@@SlicePrintRoleplay Can I email you some questions about my new 3D printing set up?
@@popeadam25000 Sure I'm happy to offer basic advice and or troubleshooting. However, if more than the basics are required I recommend joining my Patreon at the Red Scale Tier.
That allows me to set time aside to offer you 1 on 1 3D printing support with much faster response times. You also get some other fun benefits too. 😊
Slice Print Roleplay links,
linktr.ee/Sliceprintroleplay
Can I shoot you a email. I would like to know what you would recommend for software and 3d printer and scanner and anything else you could recommend.
@@popeadam25000 Sure,
Sliceprintroleplay@gmail.com
I print alot of model size kits and I always Messner can tell what scale I should resale for models so they are more uniformed. This will help alot!
That's awesome, I'm glad to hear it helped you!
Hello. I have a Tina2s printer for my kids to start. We use Pikaslice with it. My question is, while creating it looks like I do the max measurements, but the 3-D print still comes out extra small? Why?
I just found your Channel,
I immediately subscribed,
I'm new to 3D Printing,
and I Recently got a Resin Printer,
I understand I can Resize
Miniatures from one Size to another,
but, I just have one question,
I can't seem to figure out Regarding Resizing.
Im aware the bigger I scale the more Polygons will be Required for The
Structure to keep The littlest of Details,
due to reshaping of the Print,
(Forgive me if I'm not accurately
Right with Polygon naming or terminology)
I wanna upscale a 32mm Miniature into a 6-10 inch Model, but I am Worried
they will just look like Blobs of Details.
Is there a way I can Restructure and
Gain the Details without Losing the Detail?
What kind of advice would you recommend?
I don't even know where to Begin, when it comes to Restructuring the Finest bit of Details, what kind of Softwares would you recommend for a Beginer when it comes to this kind of Thing?
First off, thank you for subscribing. It's always appreciated!
Now onto your question.
When you scale a model up your slicer should give you a decent idea of what it will look like. That should give you some indication of how a model will look after it's been scaled up.
You are correct that at a certain point when a model is scaled up the details will start to get a bit blocky. However, how big you can make a model before that becomes an issue will depend on each model.
Some models have an incredible amount of detail and you can scale them up quite high before noticing any issues.
Others will be more apparent at much smaller scales.
So I'd scale up a model in your slicer and see how it looks. If you don't see any obvious issues maybe just try printing the head at that scale to confirm before committing to the whole model.
As for remeshing a model. That can certainly be done, but it will take a fair bit of practice to learn the process.
I'd recommend getting Blender for that. It's a really powerful free program. And it has a large user base so there are lots of tutorials available. If you want more specific help I'd highly encourage you to join the Slice Print Roleplay Facebook group and ask questions there. I'm lucky enough to have made friends with quite a few 3D artist and they are all great about giving advice.
Let me know if I can do anything else to help you on your journey. I'm excited to see what you come up with. 😊
So is there a quick way to lock in a %? I have a bunch of demon models that are supposed to be about 8-10ft tall but they're coming out closer to 5-6ft (according to Scalesby). Is there any easy way to simply make the model 20% larger without having to drag the slider around? I noticed there's 3 100-values for XYZ. Would I increase each to 120 to achieve this?
@@clickbait9125 yep you can absolutely do that. Make sure Unifom Scaling is checked then increase any of the 3 values (X, Y, Or Z) and the other two will be increased by the same value to keep everything unifom.
@@SlicePrintRoleplay fantastic, thank you so much!
@@clickbait9125 you are very welcome. 😊
Will this work Neptune 4 plus as well? Sorry new to this
No need to apologize. It takes a bit to figure this all out.
Yep! Whether you're using an FDM/filament printer or a resin printer, your slicer should allow you to scale your models. Just don't make them bigger or smaller than what your printer can handle.
@SlicePrintRoleplay Would this software be better than Eleegons? I'm noticing that it's a bit rough to work with and her it looks smoother. The subscription worth it? And thank you for the reply!!!
thank you so much! i bought an STL and it said it "could" go from 1/8 to 1/12 and i was like oh sweet--but i didnt check the scale before printing and my print was like FOUR INCHES TALL and now all her companions are at 10 inches just looking down at her like 🤨🤨
Haha yeah that does make things a bit awkward. 🤣
It's odd that they didn't all come from the artist in the same scale.
But in any case, I'm really glad to this video helped you. 😊
I keep trying to input my own numbers cause I hella need the print to line up but it keeps resetting or changing the numbers and I have been frustrated trying to figure out how to turn it off..
Hmm that sounds very odd. Could you post a video in my Facebook group or Discord Server? I'd like to see what you're seeing.
@@SlicePrintRoleplay surely can! Where can I find those?
@@iceypies2791 should be in the video description and on my channel home page as well.
But here are all my links just so they're easy to find.
linktr.ee/Sliceprintroleplay
Man U are just great
Much appreciated! 💚
Gotta protect those phloompers!
At all costs! 😊
Sorry if Im missing something but where can I get the Sir Scalesby stl?
The link is in the description under where it says, "Models featured in this video." let me know if you have any more issues finding it.
@@SlicePrintRoleplay Ah found it, you've no Idea how big of a help this was. Thanks mate!
@@TheLagendex I'm really glad to hear it helped you out!
I'm trying to figure out how to upscale my model without losing detail
Sadly that's not really possible without gaining some 3D modeling skills.
@@SlicePrintRoleplay F
Shout out to Dutchmogul for his scaling dummies, I use them all the time too.
That are fantastic!
I fucking love u
@@Sir_lentillo shh no one can know of our love!
😊 Glad you found the video helpful.
BRO JUST GET TO THE POINT
you just talk way too much just get to the point
I'll make you a deal. I'll try to get into the topic of a video in under 1:25 from now on. In return, you check the description for time stamps next time you're board with a video.
Hello. I have a Tina2s printer for my kids to start. We use Pikaslice with it. My question is, while creating it looks like I do the max measurements, but the 3-D print still comes out extra small? Why?
I'm unfortunately not familiar with that printer or that slicer. I'd recommend looking at the values for the X, Y, and Z. It's very hard to judge how large something is just based off of how it looks.