I thought code in MA required it. I always do it as well as replace the flapper. The tag still on the supply looks half ass as well as no caps on the closet bolts.
We lost the pressure regulator in my building years ago. When the fill valve shuts off it dribbles some water out of the top...well, the pressure was so high that dribble blew water over onto the backside of the handle and it was leaking out. Found a gasket that made enough of a seal to keep that from happening. Tried closing the fill valve partially to control the pressure but she screamed like a banshee!
That's the elephant in the room. At first I thought it was a private residence, but then he started talking about a Hobart dishwasher, well, as far as I know, Hobart only makes commercial stuff, so... yeah. Why 2 crappers side-by-side, with no privacy stalls? Also noticed while he was working on it, another water outlet, disused, just to the left of the toilet he was working on. Perhaps at one time there was a bidet in there? Wouldn't that be a helluvva show to walk in on....
Good job Steve you and Molly take care
Steven, load test it with a nice log.
PORKY i bet you like rice while you pull your pork
Howdy Steve and Miss Molly
Our companies rule of thumb , if you change a fill valve you must change the supply tube
That one still has the label on it. A new one would too.
I thought code in MA required it. I always do it as well as replace the flapper. The tag still on the supply looks half ass as well as no caps on the closet bolts.
Interesting one! Thanks! I may just replace the fill valve just as preventative maintenance now
I wonder why those toilets aren’t in individual stalls in stead of being out in the open?
Crazy water staining in that tank.
We lost the pressure regulator in my building years ago. When the fill valve shuts off it dribbles some water out of the top...well, the pressure was so high that dribble blew water over onto the backside of the handle and it was leaking out. Found a gasket that made enough of a seal to keep that from happening. Tried closing the fill valve partially to control the pressure but she screamed like a banshee!
Amusing they shut down the floor when they could have just shut the water isolation valve to the flooding toilet until Steve got there to repair it.
they are decent fill valves
Hey Steve and Miss Molly! Workin’ again ya’ll. 👍👍
why are there 2 toilets in that room?
That's the elephant in the room. At first I thought it was a private residence, but then he started talking about a Hobart dishwasher, well, as far as I know, Hobart only makes commercial stuff, so... yeah. Why 2 crappers side-by-side, with no privacy stalls? Also noticed while he was working on it, another water outlet, disused, just to the left of the toilet he was working on. Perhaps at one time there was a bidet in there? Wouldn't that be a helluvva show to walk in on....
She's a crusty one momma!!!
Hey Steve. What are the black shoes that you wear? I like them.
Steve-O Did they stop making the Brasscraft fill valves?
Nice Fix Steve!
Why you wearing gloves?..😂
Hello Steve!
dooky time Momma
And you wonder why Steve wares gloves haha
Nothing but quality here. Those flush valves with that cup around it is a horrible design
🍔❤️
A family that poops together, stays together😅😅😅😅
Well, everyone sits around a table together, shoveling it in, so why not have a family function when it's time to unload?
1st
That's alot dirt in that tank cheap wearing gloves that Sh*T get in your skin!
Another quick fix and another satisfied customer 💥💫☝️👍🫵