HOW TO CLEAN A CAR WITHOUT TOUCHING IT. FAST AND EASY
HTML-код
- Опубликовано: 28 авг 2024
- How to clean a car without touching the paint in less than 20 minutes. I will share the tools and products that I use to do a touchless car wash as well as the techniques to do it safely and effectively. A pressure washer, Foam cannon and a leaf blower is all you need. When you clean your car without touching it you virtually eliminate scratching, marring and swirl marks on the paint. This no touch car wash process is best used between larger details on a vehicle that has some form of protective coating and is lightly soiled. Its great to freshen up the car after a rainy drive. The touchless car wash is my go to safe alternative to the full wash process. The touchless car wash only achieves a 90-95% effectiveness (depending on how dirty the car is to start with) so keep that in mind. I hope this video helps you to clean and dry a car without touching it and adds this skill to your detailing arsenal.
Here are the links to all the products I used in the video.
MTM PF22.2 FOAM CANNON amzn.to/2WJVWYy
Adam’s Car Shampoo amzn.to/34IOGAJ
EGO 650 CFM 180 MPH Leaf Blower amzn.to/3qgP6Xm
EGO 530 CFM 110 MPH Leaf Blower (less expensive version) amzn.to/35BrCEj
Obsessed Garage
MTM PF22.2 FOAM CANNON bit.ly/3lpgujK
Adam's Car Shampoo bit.ly/3kg9WTj
Subscribe if you want a happy life / @hawaiidetailing
TShirts that support the channel Thanks a lot. hawaii-detaili...
MY FAVORITE DETAILING PRODUCTS
Exterior Wash • HOW TO WASH YOUR CAR L...
Wash Buckets bit.ly/3S5EcCn
Foam Cannon Direct from the manufacturer www.mjjc.com/c... Amazon amzn.to/3trSd1M
Foam Cannon Shampoo amzn.to/3vzD1Co
Bucket Shampoo bit.ly/3xdyaEY
Wash mitts bit.ly/31vF8Kr or amzn.to/3hAk3Dp
Grit Guards bit.ly/3pjM3he
Drying Towel bit.ly/3KjVEyp
Drying Aid bit.ly/326xQNo or amzn.to/3sDAXaG
Drying Aid Towel bit.ly/33tnOH6
WHEELS • CLEAN WHEELS LIKE A PR...
Wheel Cleaner Light Cleaning bit.ly/3FVDgch or Heavy amzn.to/3pD6I1v
Tire brush bit.ly/32EddG6
Wheel Face Brush amzn.to/3HLuheF
Boars Hair Brush amzn.to/3MmEr9i
Barrel Brush bit.ly/3eRNezE
Wheel Microfiber Towels amzn.to/3CbZDtS
Tire Dressing amzn.to/3vBiI7s
Tire Semi Permanent Dressing amzn.to/3Mx7w1Y
INTERIOR • HOW TO CLEAN YOUR CAR ...
Interior Cleaner bit.ly/3xOxOEE
Detail Brush bit.ly/3oDjv3Y
Interior Microfiber Towels bit.ly/3EIGobR
Vacuum a.co/2T1VK91
Vacuum reel bit.ly/3hAluSb
Drill Brush amzn.to/3MjmkB3
Cordless Drill Combo bit.ly/3Aa4sVn
Shop Vac Extractor a.co/gmxlphJ • CONVERT A SHOP VAC TO ...
Extractor Bissell a.co/ikv2XTA • BISSELL SPOTCLEAN PRO ...
GLASS CARE
Glass Cleaner bit.ly/3IGVKzv
Glass Microfiber Towels bit.ly/3hpOviH or amzn.to/35NaT3M
GARAGE ACCESSORIES a.co/7jFjrWQ
MY PRESSURE WASHER • CUSTOM PRESSURE WASHER...
MY VACUUM • CUSTOM WALL MOUNTED GA...
Want to shop on AMAZON?
MY FAVORITE AMAZON PRODUCTS www.amazon.com...
SUBSCRIBE / @hawaiidetailing
FACEBOOK / hawaii-tesla-and-detai...
INSTAGRAM / hawaiitesladetailing
TIKTOK / hawaiidetailing
PATREON / hawaiitesladetailing
PLAYLISTS
PRESSURE WASHER • Pressure Washer
GARAGE • Garage & Equipment
FOAM BATTLES • Car Soaps Shampoo Foam...
WHEELS • Detailing Wheels and T...
EXTRACTOR • Carpet Extractor
DETAILING • Detailing
TUTORIALS • Detailing Tutorials
TESLA CARE • TESLA Care
TESLA • TESLA
GRILL • Grill Videos
As an Amazon Associate I earn from qualifying purchases. Thanks for your support.
#HAWAIIDETAILING #AUTODETAILING
Love it, I just started doing this about 2 months ago since I got a new car and my wife got a new car 6 months ago. We started paying a monthly subscription to a local touchless car wash, then I found out how high pH those are and possibly damaging. Researched, built a detailing cart with a Karcher 1700, Cox Reel, CR Spotless filter, and Toro 725CFM plug in leaf blower. So easy, once a week it gets 90% clean and more importantly it's low effort (aka low sweat) and fast. Once every 4-6 weeks do a full wash, done deal. I love it. I think the key to making it work is a good protection layer that's slick. I put ceramic on both cars and then a slick topper with either McKee's 37 Hydro Blue Pro or Gtechniq C2v3 (as a drying aid). Put on the topper every two months or so, keep it as low effort as possible at every angle.
Great setup and strategy. Glad to hear about it. Thanks for watching
Excellent vid, bro. I just tried a touchless method for the first time today (before seeing this video) and failed at the leaf blower stage. I was cursing the EGO unit (the 530 CFM), wondering why all I could do was push water around. My arm almost fell off, LOL. Then you come along with the answer: P&S Bead Maker. Not only that, after my leaf blower fail, I said to myself, "well, next time I'll just use a microfiber towel after the wash." Nope. You saved me from another fail. Subbed and will use the affiliate links to buy some products. Thanks!
Thanks a lot. I appreciate the support
I know this is like months late but air drying is best when theres some sort of ceramic coat on the car
Yeah. Without ceramic coating, it's not going to bead up and drip down. It'll just spread the water.
Will definitely try. Washed my car and then it rained the very next day. Been contemplating what to do in these cases 👏
Thanks !
Touchless only does an ok job only if its not that dirty. Be sure to blow dry if you do this so you dont scratch the car.
Exactly what happens in n Florida every time you wash your car, freaking rain, 😂. Great video man 👍
Tell me about it. Hawaii too. Thanks for watching and commenting.
Worse. I just spent an hour washing my car yesterday (admittedly I was moving slower than normal because for once it was nice outside in FL), looked perfect when I was done. Cold front moved in last night and I guess I slept through some crazy winds because I woke up today and it literally looked like someone picked up grass and dirt and threw it all over my car. To the point where I was actually questioning if someone really did, then I realized everything was dirty everywhere.
Got everything out just now and did my regular touchless wash and it basically looks completely clean again. I love it.
I do pretty much the same in between maintenance washes. I found spraying the lower panels with ONR before the first rinse helps remove the road nastiness. :) Love your energy Bro, subscribed.
Thanks a lot and thanks for watching
Wow the detailing world keeps evolving
Thanks for watching
Hello great video! I plan on buying an all black car. Going to get it ceramic coated. I want to avoid touching the car as much as I could during the wash and drying process. I want to do my very best to not scratch or leave swirls on my paint. Would only air drying method without using a microfiber towel work when drying the car with air blower? Could you please give me tips or advice to avoid scratches or swirls on my black paint car. Thank you!!
I do this exact same thing. You need a ceramic/graphene coat to really have awesome results
Yeah. The better the coating the easier to clean. Thanks for watching.
Thanks for the vid! I picked up my pre-owned Model 3 a few weeks ago…love it! Unfortunately I hit a raccoon at 0’dark thirty in the a.m. while doing about 70 mph and it’s in the shop now. $6500 worth of damage. Should be done in a few days. I’ll be adopting your method after I get ppf for the front end. Luckily I already own the ego blower (along with the ego mower). I’ll also use Turtle Wax Hybrid Graphene post wash. Have you seen that in action? Great stuff and inexpensive. Thanks again! Subscribed!
Will have to check it out. Thanks for watching
This is great - the blower is key to all of this of course, and those EGO's are fantastic, easily next on my list!
Thanks for watching
Another great vid!🤙🏽
I was looking for an EGO a while back but couldn't find one with a battery here on island. Ended up with a corded Toro Power Jet F700 from Home Depot. Man does it have some power. At under $60 it's a great value alternative to the EGO.
Thanks glad you liked it. That’s good to know. I had a gas one for years but this one is a whole different animal.
Great video, great energy! This how I normally wash my C8!
Thanks
If you have any sort of ceramic coating or spray such as fast finish or AP’s ceramic spray advanced. There is no reason to wash it any other way. Only thing I would do is use a blower that has some sort of filter on it so it does not smack and contaminates on the clean car. I like the master blaster blowers personally
Bilt Hamber Touch Less works good for these
I do the same process but add the step of turning off the pressure washer, removing the nozzle, and using free flowing water to dry as much of the car as I can before using my blower. I do this because my city's water is extremely hard (TDS of 400+ ppm) This eliminates most of the water on the vehicle that can turn into water spots, and I'm not racing around the car with the blower.
Yeah the old dry the car with water trick. Awesome and thanks for watching
Man.. you’re fun to watch! 🤣 kinda like the guy from “Fast Times at Richmond High” Spiccoli or whatever his name is..played by Sean Penn..😁
Thanks for watching. That was a good movie back in the day.
I agree... Great video. Kenneth from Norway🇳🇴
Thanks. Thanks for watching and commenting.
I tried this method on my brand new 2022 black Challenger widebody yesterday and I'm afraid that it doesn't work that well. The soap leaves streaks, and the blower doesn't get rid of the super tiny water dots. I can blow dry for 2 hours and the tiny water dots remain and then dry on the paint. I was really hoping this method worked as well as it did in your video and others, but there seems to be no replacement for microfiber cloth.
You have to have a ceramic coating that is up kept with a protectant type topper so that the dirt comes off easy and the water beads and can be blown off easy with the blower. Without a high level of hydrophobic action the water and soap will stick to the raw paint and the blower is not effective. Even with that this process is only good for a light mid week cleaning. If you wanted this to be effective on a dirty car you would have to use a strong soap that can eat the dirt off without agitation which has it own set of issues. It would eat the dirt and a bit your protection each wash. Also terrible outcome if it dries on the paint. Hope that helps and keep in mind that these are just my thoughts on this. Use this as a way to light clean a protected car in between washes. Use a traditional wash process for a really dirty car. Thanks for watching
I agree with @Ranter550 - on my wife’s black car, this technique made it slightly less dirty. You could still see a film of dirt that would come off easily with an actual rag. Back to two bucket system for me.
Great video! Did you try skipping the pre-rinse part, and just apply the foam straight to a dry car? Most testing has actually shown that to be even more effective - and you save some time as well :)
I have tried all different ways and it just comes down to preference and the amount of dirt you have on the car to deal with. I plan to do an update Wash video soon. Thanks
Which is best Gyeon wet coat are PnS bead maker
Great video! Subscribed! I was wondering if you have checked out any Jay Leno car care products? I would love to see what you think about them!
I have a few. Will spray them on the hood soon. Thanks.
nice! i’m looking forward to leaf blower review!
Thanks a lot.
That's a nice flexible pressure washer hose you have on your hose reel. How about some links for your hose and reel? Thanks.
Here is my whole rig with links.
ruclips.net/video/S73KfXSwT_4/видео.html
Your videos so fun to look at i sit watch and laugh 😆 your fun brother keep it up 💯
Thanks man. I try to have fun when I am making them.
@@HawaiiDetailing keep doing it man
Great my friend!! Love your videos!! 👍🏼👍🏼
Thanks a lot.
Since you are using bead maker no ceramic coating? Great video.
My car does have a ceramic coating. I use beadmaker as a topper. Thanks for watching
Great video! Glad I stumbled on to your channel!
Thanks man. I appreciate it.
Do you recommend using a 40 degree nozzle with the pressure washer for a full ceramic coated vehicle?
Yes. That’s what I use.
Love the channel! Keep up the great content.
Thanks a lot.
“Get everything wet” 😂 by the time I finish the second side the first is completely dry😂
How many ounces of water and how many ounces of soap did you use?
Great video!!
Glad you enjoyed it
Wash off the soap from the bottom up and rinse off from the top down
Great video and info on your channel. Noticed you changed your whip line to the pressure washer...looks to be SS....what kind and length do you have? Thank you!
Thanks. 17" its fitted to match the distance between my hose reel and the pressure washer. Each setup will vary based on that measurement.
@@HawaiiDetailingThank you but what brand did you go with and where did you buy it from? When I clicked on your link on older video of you installing your set up, it definitely wasn’t this SS version you now have. Thanks again for all your work!
@@gary9879 I don’t have a link to this new jumper hose. I had it custom made. There was a lot of going back and forth to get it right. We sorted it out and he made it. It came out nice. I plan on getting the guy to make some so that people can order them. It’s a good fitting hose with the 90 degree bends built in. I will post a an update when I work things out.
@@HawaiiDetailing thank you...your right...it’s the 90 degree bend that keeps it so clean and not stick out. Hopefully that doesn’t cut back on flow....but it does look clean!
@@gary9879 I have not noticed any reduction in flow. Seems exactly the same.
Yeeaah. Nice job. How do you compare Adam’s car shampoo to new GSF? Thanks
I like them both. GSF is a little slicker to the touch but cost considerably more so there is still some question about that topic. I plan on doing a head to head on that soon. Already started on it. Thanks for watching.
@@HawaiiDetailing Thank you
Are you using DI water in this process?
If you have it use it for sure. Thanks for watching
Keep it up love the videos
Thanks a lot.
Any specific reason why you used Adam’s car shampoo and not Mega Foam for this?
No. either one would have worked well.
If you want to do touchless wash you can not use that shampoo , that shampoo is pH balance, you need alkalite shampoo PH min 12 , like robotic wash machine , they use PH 12 shampoo it will definately clean grime, dust, insect
Why dont you just use rinsless wash after you do this it will make rinsless safer and car will be totally clean then you can put spray wax on you are going through trouble of using presurexwasher foam canon not every one has it mounted convenient people have to take out set up might way go all out do rinsless after ward sinse you did full wash few days ago
White car that have no problem with touch free car wash，not for black or another's dark color.
I love finding any excuse to wash the car 😆😆
Yeah Nice. I agree. Thanks for watching
who was that, the FBI telling me to subscribe? DONE ✅
Hahaha. Yeah. Funny. Thanks
Wow, you let it sit 10-15 minutes? I let mine sit for about 3-5
I let it sit roughly 10 mins. 15 if you count the application. I want it to sit as long as it can but definitely not drying or all running off the paint. I eyeball the right time to rinse it off. That’s the best practice. I definitely don’t time it. If it’s hot it may be foam on and rinse off. If it’s a cool day and out of the sun than longer is better. This Hawaii red dirt needs extra soak time.
First
😎👍🏼
Thanks for all of your support.
Going spotless anytime soon?
It’s on my list for sure. Thanks for watching.
Your car is white and that why you can get away with it not being perfect. My car is dark color, you can see everything.
The only guarantee in life is the rain after every time you detail your car.
Hahahaha. Yes.