65mm Whoop's with Walksnail are Incredible -
HTML-код
- Опубликовано: 31 июл 2024
- CiottiFPV.com
Patreon helps me out the most...
/ ciottifpv
0:00:00 Intro
00:04:30 Only flying 5 inch so much work.
00:07:39 This is what you can get supporting Ciotti
00:10:28 Can you dive in too tiny whoop AIO firmware?
00:20:30 So much extra work flying outside
00:24:30 5 Inch Rampage footage
00:41:26 Flylens 85 has 1003 motors would 1203 ‘s be too much for the props and aio?
00:42:17 What size whoop can best handle the Walksnail system?
00:43:55 I found 1404 6000KV
00:46:44 My next test is to do it with the T-Motor 13A AIO
00:47:23 Chris Rosser tests Kv by driving a motor with 10v and multiplying it out
00:48:10 Your outdoor rip at Rampage was awesome. Wall riding etc.
00:49:23 What will be the next fund?
00:54:19 If you could only choose one quad to fly for the rest of your life, what would you choose?
00:55:54 I’m often times too scared to use turtle mode
00:58:44 How are motors soldered (3 wire) order / pad locations / hot & ground 's.
01:00:33 I run the 6000kv 1404 RCinpower on 3inch GemFan bi-blade
01:00:54 I just flew my new 50g 2S 75 Walksnail build
01:02:42 Got my meteor 75 Pro. What should be my next quad?
01:03:31 65mm is incredibly inoffensive
01:04:03 The possible future illegality of flying outside (I agree)
01:08:23 65mm Whoop's with Walksnail are Incredible
01:23:20 Walksnail support
01:23:42 And what about 2s 75mm?
01:23:50 Thoughts on the RCinpower 29kkv motors?
01:25:00 let’s fly the Walksnail rig
01:37:36 Something is out of place
01:44:49 Let’s check the rig. Bluejay and Betaflight
01:53:14 I think you got the TPA rate backwards
01:55:26 Flying after some big setting changes
01:56:23 Here is Teddy
02:05:51 The BetaFPV cross aio's suck
HUGE THANKS to Apache Smoke Wounded Sniper and the Gangly Gang for the time stamps!
Music - epidemicsound.com/referral/uo...
- The Gear I Use & Trust -
Frames
BetaFPV Meteor 65 - bit.ly/3K12Rqe - amzn.to/3JWVVKH -
FPV Cycle Glide - fpvcycle.com/?ref=ciotti
AOS 3.5 & 5 - bit.ly/3wHBGYY
Ummagawd 2Fiddy - bit.ly/3MTgMNx - ummagawd.com/?ref=CiottiFPV
FC
HappyModel F4 ELRS AIO - bit.ly/3YCTUY2 - amzn.to/3I0dZ46
T-Motor Mini F7 20x20 - bit.ly/3wKQMy7 - amzn.to/3ILV5fZ
T-Motor F7 30x30 - bit.ly/38lW2iy - amzn.to/3gedXI0
ESC
Micros - T-Motor F30a ESC - bit.ly/3sWKiKg
5" - Aikon AK32 35a 20x20 - bit.ly/3HfMPnY - amzn.to/3o9RWhU
T-Motor F45A/F55A Pro II ESC - bit.ly/3z0Zee9 - amzn.to/3wRn1dZ
Motors
T-Motor F1404 4600KV - bit.ly/3jLwe5d - amzn.to/3YpQBDR
4" - HGLRC Aeolus 2004 3000kv - bit.ly/39XmU8K - amzn.to/3IRlCbw
5" - T-Motor F40 Pro IV (2306) 1950kv - bit.ly/3lK1Qp1 - amzn.to/3H9fOd8
Flywoo 9x15mm LED Race Wires - bit.ly/3CfgnkC
Props
Gemfan 1210 - bit.ly/3Ymkt4f - amzn.to/3RTElcz
Dal 3028 - bit.ly/3wXWefX
Gemfan 5143 - bit.ly/3lSFUIz - amzn.to/3g9rcdc
T-Motor 3140 - bit.ly/3PTQHQy - amzn.to/32JiPC7
Cam
Runcam Nano 3 - bit.ly/3YLA7WD - amzn.to/3luwqGr
Foxeer Nano Toothless 2 StarLight - bit.ly/3wTi5FC
Runcam Hybrid - bit.ly/3NKSVzs - www.banggood.com/custlink/mG3...
Insta360 Go 2 - amzn.to/3B0YXHe
VTX
TBS Pro32 Nano - bit.ly/3xkFQXq - amzn.to/3lpSWAa
Receiver
HappyModel ELRS EP2 - bit.ly/3YpxppW - amzn.to/3RRiwtU
TBS Crossfire Nano - bit.ly/2OYMpbW - amzn.to/2MUrPII
Transmitter
FrSky QX7 - bit.ly/33z557m - amzn.to/2oWi4la - www.banggood.com/custlink/GGG...
TBS Crossfire Micro - bit.ly/2OziQOW - amzn.to/35LjZJP
Antennas
Lumenier AXII 2 U.FL - bit.ly/2QF5NLH
Luminier Micro AXii Shorty - bit.ly/35k8CqW
TrueRC Singularity SMA Long Antenna - bit.ly/2SMZVmh
Battery
WeBleedFPV 1s 300mAh BT2.0 - webleedfpv.com/5Umxho
GnB 4s 450mAh Batteries - amzn.to/2nXSrzS - www.banggood.com/custlink/D33...
Tattu R-Line 4s 850mAh - bit.ly/38Ad7jP - amzn.to/2ssSmWF - www.banggood.com/custlink/mGm...
Tattu R-Line 6s 1050mAh - bit.ly/2Sl8UcK
Chargers
ViFly Whoopstor - bit.ly/3lwrela - amzn.to/3HSN8H0
iSDT 608AC - bit.ly/40OXZKv - amzn.to/3XpyU5W
iSDT Q6 Nano - bit.ly/3jR3mbG - amzn.to/3YFXAID
Power Supply - bit.ly/3lrXyFV - amzn.to/2uT5YvO - www.banggood.com/custlink/K3G...
Tools
M2 Hardware Kit - bit.ly/3RC5YVN
TS100 - bit.ly/2DAoBpr - amzn.to/382Hwr0 - banggood.com/custlink/v3DK4SZK1b
Solder - amzn.to/2RgrbHy
5x Loupe - amzn.to/2QWiH9n
Nut Grabber - amzn.to/35QLf9N
8mm Wrench - amzn.to/33BHPHF
Tiny Whoop Prop Remover - amzn.to/3tQ4Bc0
Best RUclips Upload Settings - whoismatt.com/hdexportsettings/ 
Кино
02-06-2024
Good day Ciotti and all of you beautiful GG how is everyone doing?
00:04:30 Only flying 5 inch so much work.
00:07:39 This is what you can get supporting Ciotti.
00:10:28 Can you dive in too tiny whoop AIO firmware? Do they all run bluejay an impacted by the bug?
00:20:30 So much extra work flying outside.
00:24:30 5 Inch Rampage footage.
00:32:06 More 5 inch footage.
00:41:26 Flylens 85 has 1003 motors would 1203 ‘s be too much for the props and aio ?
00:42:17 What size whoop can best handle the Walksnail system?
00:43:55 I found 1404 6000KV but 2S rated can I use them on 4S and motor limit them down on a 2.5 Inch? Is the Voltage or RPM the limit?
00:46:44 My next test is to do it with the T-Motor 13A AIO, which has BLHeli32, which can, in theory, go over 83k RPM.
00:47:23 Chris Rosser tests Kv by driving a motor with 10v and multiplying it out
00:48:10 Your outdoor rip at Rampage was awesome. Wall riding etc.
00:49:23 What will be the next fund?
00:54:19 Feel free to ignore if it's going off topic! If you could only choose one quad to fly for the rest of your life, what would you choose?
00:55:54 I’m often times too scared to use turtle mode because I don’t know if the motors can safely spin without burning the motor/esc. At which point do you start walking to get your quad?
00:58:44 How are motors soldered (3 wire) order / pad locations / hot & ground 's.
01:00:33 I run the 6000kv 1404 RCinpower on 3inch GemFan bi-blade 1.8pitch, no motor or throttle limit.
01:00:54 I just flew my new 50g 2S 75 Walksnail build today and holy shit it's stupid powerful, more punchy than my mob6 for sure. Can't wait to see you fly that spec! (no pressure)
01:02:33 With those high Kv? you can maybe use a thermal camera sometimes I think it could help
01:02:42 Got my meteor 75 Pro. What should be my next quad? I usually fly about 10batts a day or more and I’ve been getting pretty damn good. Any suggestions?
01:03:31 I agree, 65mm is incredibly inoffensive. I love toothpicks, but even they can draw in Karens, a tough choice, but I'd probably go 75mm to give some extra guts for HD DVR.
01:04:03 The possible future illegality of flying outside (I agree), my whoop goggle choice seems very important. Have DJI & Looking at Skyzone 04O Pro, should I consider Fatshark? HDZero?
01:06:27 You said you'd choose the 65mm class. This is on analog then, right? is there an indoor ripper with Walksnail? Because I think it’s too heavy for 65mm.
01:08:23 let’s talk about the 65mm Whoop's with Walksnail are Incredible. Settings, prop fitting and footage.
01:23:20 Walksnail support told me they are releasing an analogue module for the Goggles X (I contact them as Speedy bee wouldn't work).
01:23:42 And what about 2s 75mm?
01:23:50 Thoughts on the RCinpower 29kkv motors?
01:25:00 let’s fly the Walksnail rig.
01:35:53 What did he fly just now?
01:37:36 Something is out of place.
01:44:49 Let’s check the rig. Bluejay and Betaflight.
01:53:14 I think you got the TPA rate backwards! The number you set is the % of the pid you want at full throttle. 100% TPA rate means TPA does nothing.
01:55:26 Flying after some big setting changes.
01:56:23 Here is Teddy
02:05:51 The BetaFPV cross aios are fu.... I’ve broken 5 in less than the last 4 months with 25kkv on 75mm and HDZero, sadly there isn’t really another option that is still being produced, if you can find a Superbee f4 lite those seem to be bulletproof in all ways, otherwise, maybe NewBeeDrone hummingbird v2 or the SuperX hd, but those weigh more.
Stay safe everyone and have fun flying
Good day Dude 😁 thanks im doing fine, hopefully you too ✌️ Thanks 👊
If you can get a hold of the old Superbee F4 FC, that has enough power on the 5v pad to support Walksnail, it wouldn't brown out, even down to 2.3v (was the lowest I've seen in the goggles before i unplugged). Its a pity they replaced it with a much heavier SuperX HD
Does the superx hd have enough power on the 5v rail to power the 1s lite vtx?
@@3DKreateFPV I'm not actually sure. I was so disappointed with the weight of that FC I sent it back before soldering (ordered superbee f4, received superX)
@Tokyo_Dom do they have an elrs version or just frsky?
I've got a QAV-S JohnnyFPV frame with an Infinity AIO, Avatar HD, and Stan FPV 2604 1690 KV motors. It's 601g UAW with a 6s GNB 1300 mah HV. I bought it complete from a dude on Bardwell's discord because it was a sweet deal. I was pretty unsure if I'd like it at all when I got it, but I love it. Flies super smooth and hangs upside down forever. It's kind of a breath of fresh air compared to my more "traditional" Apex EVO build with a GoPro on top.
Great content! Do you have a favorite system for when your flying tiny whoops?
I'm gonna take a guess that by system you're talking about video systems, analog is king
@@CiottiFPV yes video system (didnt know the name). Cool thanks good to know. Just starting out. Think im going to just buy the hd zero goggles and then later add analogue and walksnail to have options for future. Since that gives the best of the 3 worlds i guess and not locked itnto just one.
@kevin sumner the tmotor 13a is a great idea, if it weighed 3g less...
i dont think that tag worked but fuck it
What happened to chasing the lightest build?
How many stacks turned you to walksnail 😂
These are the lightest possible Walksnail builds, analog is still king for hardcore freestyle but these are dam good and you can see where you’re going :)
lets gooooooo!!! lol
I’m a noob flying indoors, on angle mode flying at max 30% thr, my 75 ws is at 3min 300mah
What motors are on that? I get 3 mins on my 75mm as well with a bit more throttle (fun 😉) but mine is lower kV 0802s and all the weight saving stuff Ciotti doesn't like to do (soldered motors etc) 27g. I strongly believe beginners don't need the high kV, if you get good enough to need it, you can afford an extra $30-40 on some new motors 😂
@@Tokyo_Dom i am in 29g but my frame is custom with a carbon frame. I could make it 27.5 but at the moment it wouldnt make a difference with my current skills. 0802 25000kv. Bt2.0. Yes i don’t need that power from high kv yet.
@@jeffclassics I would have said 25000kv is pretty high kV for a beginner 😂 but compared to what ciotti flies it's lower? Lol. My 23g analog basher whoop uses 25000kv and it's an absolute beast!
@@Tokyo_Dom i really liked my mobeetle65, it has nice punch at 17g, basically weigtless. But i sold my analog rigs to go full WS on whoops. I’m not yet splitting S on my WS, still learning.
@@jeffclassics hey I think I saw your 75mm on Ricebowl's post.. That is sweet! I would get rid of the heat spreader and motor plugs but I'm all about that light weight (and I've had more motor wire troubles with plugs than I have with direct soldering). Hope to build one of his whoops soon!
But ciotti hates walksnail and said it was unflyable
I do? I thought I loved Walksnail…I’ll have to remind myself that I actually hate it I guess, weird……