How Much Does A Garage Floor Coating Cost?
HTML-код
- Опубликовано: 9 мар 2024
- #EverythingAboutConcrete #MikeDayConcrete #garagecoatings
I'm sharing with you what it costs to have an epoxy flake or polyaspartic flake coating done on a garage floor. The cost to hire someone like me will vary a lot depending on where you live, but what we charge is for hiring a professional floor coating contractor.
This garage floor had a lot of prep that added to the cost, but as you'll see, the garage floor was completely transformed into a showroom-looking garage floor.
I can show you how to fix & repair the concrete so you'll get a brand new-looking floor like this one.
Check out my course below and I can help you learn how to do these coatings the right way.
EMAIL ME - www.everything-about-concrete...
THE CONCRETE UNDERGROUND - TRAINING WITH MIKE:
www.theconcreteunderground.co...
GARAGE FLOOR EPOXY FLAKE COATING COURSE:
www.theconcreteunderground.co...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykajabi.com/offers/...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.net/oeRMmn
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.net/4ZKEL
Screedemon Battery Powered Vibratory Screed:
imp.i284638.net/LzdBo
14' Screed Board for ScreeDemon:
imp.i284638.net/QOPDZM
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATION TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete 
Хобби
Great Job. Great Crew!!!
That's a beautiful looking floor 🎉 Nice seeing Tia. Outstanding job 👏
Thank you! 🤗
Appreciated the commentary on WHAT you’re doing and WHY…xlnt education vid👍. 3-car garage in SoCal, need to find some estimates and get ‘er done😅
Thanks for these videos!
My pleasure!
Mike, Thank you for making these videos!! Im constantly amazed at how much you get done and how often you make and release videos.. wow. I need to finish my 600sq shop garage floor. Are the top coated flake floors slippery when they get wet?
Maybe a little, like the concrete would be but no-one has complained and said they're slippery.
What walk behind concrete joint cutting saw do you recommend? Or have great success and experience with?
I primarily like to cut my joints the day after. My understanding is some saws are designed and better at cutting fresh concrete and others are better for aged concrete
Any advise and help is greatly appreciated
@@MikeDayConcrete
Man I wish you were in Ohio lol. I'm midway through my project now and its hellish. I've learned SO much from your videos. And I'm still in prep phase bc my garage floor was almost worse than this one (NE Ohio winters darn it). In retrospect, a pro would have been worth the cost -- if I weren't already half way there in supplies alone lol. Keep up the vids, love them!!
Amazing job!! Question, I see that everyone is walking soon after rolling it out and yet I don't see any footprints being made. How fast does this stuff dry?
Hi from Melbourne, Australia
Hello!
Im having an issue when and when not to use a specific primer under the basecoat?
I've never seen the base coat rolled without spreading it first.
So when I buy the course will u give me the contact of the company that sell the special order like that black u using and any other special colors
Yes, the products are talked about in the course and I can tell you whatever else you need to know.
Perhaps bit of a redundant question Mike, but I am interested in brand of that 14-15" roller cage you use? Been looking for it fooorever and no success. I did asked around and searched and searched but no results. That must be light fiberglass cage vs regular heavier metal ones that are readily available. When rolling over head that weight matters. Thanks in advance.
Purdy makes an expandable paint roller head. From 12-18 inches
@@jamesmoran8335 Thanks! I got that one but am trying to reduce the weight while rolling for a full day with it above my head. One that Mike is using seems to be made from fiberglass hence it is lighter. I've seen it else where too but no clue where to find it or who makes it. It might be older and discontinued item. 🤷♂️
I'll have to go out in the work trailer and look.
@@MikeDayConcrete Thanks mike. I found it. It's called Big Ben from Wooster. Thanks for all the knowledge sharing! 👊
I’m surprised the customer didn’t do the footing
How durable is it with tire rotations, snow, salt, oil, radiator fluid, gasoline, etc? Looking pretty is irrelevant if the product doesn't last and, in the end, makes things worse.
The products we use are very durable, no call backs. That's why we use them!
Thank you captain obvious
How much is the total?
Total would vary due to square footage of garage. Determine square footage and multiply by $7.50-$10.00.
I turned on CC to watch and says 750/sqf
How in the world is he able to walk on recently applied coating??? It's not sticking to his shoes or leaving marks???
Spike shoes
Spiked shoes and baseball cleats
Well that explains it!