Thank you so much for the kind words! 🙌 I’m glad it was helpful and easy to follow! If you have any more questions or need more tips, feel free to ask anytime. Peace! ✌️💜💙
your compliments are our motivation to produce more meaningful and better videos to serve you, if you have any comments, please do not hesitate to write to me.
I am not a welder, but a carpenter and mason skills.. when i c this application, it is a little bit expenses and more times completing in designing the edges of to make the frame👌, ,👍 👏
Yes, thank you for watching our video as well as you have concerns about You are not a welder Yes, thank you for your evaluation and interest, please apply it to any part of your work to optimize your work, right? Yes, if you go to school or participate in anything else, please leave a comment below. Good luck and success to you.
Thanks! I appreciate that. 😊 What are your thoughts on finding a balance between creativity and sustainability in DIY projects? Have you seen any projects that really exemplify that? I’d love to hear more about what inspires you!
¡Me alegra que te haya gustado la clase! 😄 Todos empezamos como aficionados en algún momento. ¿Qué proyecto estás trabajando ahora o te gustaría intentar con lo que aprendiste?
Hola, proyectos ninguno, de momento, tengo más de 30 años en mantenimiento de edificios antiguos, transformados en edificios para administraciones públicas, y comunidades de vecinos en el casco antiguo de Madrid, como Lavapiés, atocha, sol, embajadores.. y muchas veces hay que inventar lo imposible....y siempre vienen bien ideas nuevas, ya dice un refrán, muriendo y aprendiendo....estoy abierto a aprender siempre es y a ayudar, y enseñar a gente nueva, yo estoy a punto de dejar el tema, y la gente nueva no sabe, obligan a muchos títulos, pero la experiencia que....
Yes, grinding weld beads can affect the strength of weld joints. While it can improve aesthetics and reduce stress risers, excessive grinding might remove too much material and weaken the weld. It's essential to balance appearance with structural integrity. Have you had any experiences with grinding welds?
Thank you for your comment! It's great to hear that you found the tips on where to spot weld before completion useful. Solid discipline and technique in fabrication are crucial, and we're glad to share these insights to help improve your welding projects. Keep up the good work, and stay tuned for more helpful tips! 👍
That sounds great! Having accurate measurements is key for a successful project. What are you planning to make? If you need any tips along the way, just let me know! 🛠️✨
Obrigado por seus comentários! Como queria ilustrar cada etapa, optei por fazer cada parte. Porém, tentarei o método que você sugeriu nos projetos a seguir!
Yes thank you for your compliments and your interest Yes We will try our best to make videos that bring a lot of value to viewers and relaxing moments Do you have any suggestions or participation Please let us know Let us make your great ideas to send to you and the audience to watch next sincerely
Thank you for your attention and your sincere compliments. Your compliments are our motivation to make the next videos. Do you have any suggestions to make our next videos more beneficial to the audience? Please leave a comment below.
Thanks! Safety always comes first when using tools like the grinder. Keeping the guard on and wearing gloves are simple but crucial steps. 🔧 Have you found any other safety tips helpful when using your tools?
Cutting the removed corners at a 45-degree angle helps create a cleaner, more polished look. It also reduces any potential sharp edges and can help the corners fit together better if you're assembling multiple pieces. Plus, it often improves the overall strength and stability of the project. Do you have a specific project in mind where you want to use this technique?
@@TrendDIY I do not, I'm not a welder either. It was just something I didn't expect and I did not understand the reason for it. Thank you for clarifying.
Thank you for your interest and compliments on our videos and channels. Your compliments are the motivation for us to continue making more valuable videos. Do you have any suggestions to make our videos better? Please write to us. Don't forget to spread the video to your friends. Stay tuned for our next videos. Have fun!
Thank you so much for your kind words! I'm thrilled to hear that you found the video both informative and enjoyable. Your support means a lot to me. Stay tuned for more exciting content and happy welding! 🔔🫶🙏🤝💚💐💐💐💐
Terima kasih banyak! Saya senang mendengar bahwa Anda menghargai kerja saya. Dukungan Anda sangat berarti bagi saya. Terus ikuti video-video saya untuk lebih banyak tips dan trik istimewa. 👍
The tick tack welding is interesting 🤨 I’d take it to the next level smooth it with car body filler and two pac prime it and custom paint it.. or power coat it
That sounds like an awesome plan! Taking it to the next level with body filler and custom paint can really elevate the look of your project. 🎨 Have you done similar projects before, or is this a new challenge for you? What colors or designs are you considering for the custom paint? And do you have a preference between powder coating and traditional paint?
Your comments are the driving force for us to produce more valuable videos to serve you. If you have any suggestions, please do not hesitate to write to me.
Thanks for the suggestion! Mandrel bending really does give a clean, professional look to the curves. 🔧 Have you worked with mandrel bending before? I’d love to hear about your experiences or any projects you've done!
Agradecer! Que bom que você gostou e achou o vídeo inteligente. Se você tiver sugestões ou pedidos para vídeos futuros, Por favor, contribua mais para nós
Thank you for your interest in our videos and your comments on our videos. Thank you for your compliments. If you have a lover who is participating, please introduce them. Thank you.
That’s a classic line! Welding over galvanized can be tricky with the fumes, but it definitely has its perks. Have you found any specific techniques or tips that help when working with galvanized materials? And do you have a favorite project you've tackled using that method?
@@TrendDIY Just got to grind the zinc off in the weld area, and try to reduce the heat input as it can still burn off in the area next to it. It's not just a health issue, but also a weld contamination concern. I don't actually often use galvanized metal for projects, was just highlighting that a special care is required.
Absolutely! Building a table involves a lot of planning, precision, and hard work. From selecting the right materials and design to cutting, joining, and finishing, every step requires skill and attention to detail. It's great to see appreciation for the effort that goes into making quality furniture!
Okay my only issue is that those round poles seem to be galvanized. Please, please do not weld the galvanization. Grind it off first. Unless you like to get sick or poisoned. Granted with good ventilation spot welding it might be "safe" but why chance it especially for welding beyond spot. If people do not know then please look up what welding galvanized metal does.
That's a great point! Welding galvanized metal can release harmful fumes, so grinding off the galvanization is definitely a smart move. Safety first! 🔧 Have you come across any other tips or tricks for working with galvanized materials? It’s always good to share knowledge and keep everyone safe in their projects!
@@davidcrumrine1165 Thanks for sharing your experience! It's great that you recovered quickly. However, prolonged exposure to galvanized steel fumes can be harmful, and drinking milk, while a popular remedy, isn't a proven treatment. It's always a good idea to take proper precautions, like working in a well-ventilated area and using a respirator. Stay safe while welding!
Спасибо за ваши комментарии и обмен информацией. Я оптимизирую эту часть. Если у вас есть какие-либо комментарии, оставьте их ниже. Желаю вам доброго здоровья.
Ya terima kasih atas ketertarikan anda terhadap video kami, ketertarikan anda menjadi motivasi bagi kami untuk terus memproduksi video-video selanjutnya untuk melayani anda, silahkan tonton video-video kami selanjutnya, Dan jangan sungkan untuk memberikan tanggapan anda kepada kami, semoga anda selalu sehat
Spot welders can be super handy for joining metal quickly and effectively! Are you thinking of adding another one to your toolkit, or are you exploring different techniques for spot welding? What kind of projects do you usually use them for?
Thank you for the feedback! I agree, including the math behind the angles would add great value. I’ll keep that in mind for future videos! What specific angles were you curious about?
Absolutely agree-safety always comes first! Galvanized steel releases toxic fumes when welded or ground, so a proper respirator is a must. Thanks for emphasizing this important safety tip! 🔧😷
테이블을 직접 만드셨다니 정말 대단하시네요! 수고와 노력이 얼마나 많이 들어갔을지 상상이 갑니다. 사실 DIY 프로젝트는 결과물뿐만 아니라 그 과정에서 얻는 만족감과 성취감이 정말 크잖아요. 직접 만든 물건이니까 본인만의 특별한 의미가 있을 거예요! 그리고 꼭 다른 사람들이 쓰지 않더라도, 시간이 지나면서 그 테이블이 가지는 가치가 점점 커질지도 몰라요. 무언가를 만들 때의 경험이 더해지면 그 물건이 더 소중하게 느껴질 수도 있거든요. 혹시 나중에 다시 테이블을 업그레이드하거나 다른 아이디어로 변형해볼 생각은 있으신가요?
Ya, terima kasih atas perhatiannya, dan dukungannya. Silakan tonton video kami selanjutnya, agar kami dapat memberikan solusi untuk itu pak. Silakan tinggalkan pendapat Anda di bawah ini
Vielen Dank für Ihr Feedback. Wir werden aus Ihren Erfahrungen lernen und diese auf das nächste Video anwenden. Wenn Sie teilnehmen oder mir Feedback geben, hinterlassen Sie bitte unten einen Kommentar. Vielen Dank.
Thanks! Safety always comes first when using tools like the grinder. Keeping the guard on and wearing gloves are simple but crucial steps. 🔧 Have you found any other safety tips helpful when using your tools?
Ваша точка зрения очень тонкая. Да, сэр, и мы очень сожалеем о таких действиях. В следующем видео я научусь на своем опыте, и этого не произойдет. Есть ли у вас какие-либо комментарии или предложения? Что вы можете сделать для того, чтобы видео стало качественнее и охватило больше зрителей? Пожалуйста, оставьте комментарий ниже. Желаю вам доброго здоровья.
Thanks for the tip! A metal cutting miter saw would definitely make the job easier and more precise. I'll look into it for future projects. Appreciate your advice!
😂😂😂😂Milhões de vezes mais fácil usar o tubo e riscar em volta em duas chapas e soldar duas chapas retalgulares menos corte , menos solda, menos acabamento, e metade do tempo e os vertices ficariam realmente redondos.😂😂😂😂
wonderful Thank you for your perspective your reviews are wonderful you must be an engineer Yes sir We have tutorial videos Although it is not perfect we hope you will participate in giving more comments to make our videos better to serve more people Thank you
That sounds like a smart idea! A proper welding table can make a huge difference in both safety and convenience. Do you have any specific plans for the table, or are you looking for ideas?
@TrendDIY perhaps you building a table that accommodates what you do would offer great ideas for the rest of us. You get a table, and I can get ideas cuz I'm not that smart 😂
I feel like ur doing stop motion welding. As I went to trade school for welding, it makes it kind hard to watch. Almost as hard as watching a pre-schooler drawing inside the lines for the first time. You just want to jump in and help them, but you don’t because you if you do, then you know they’ll never actually learn from their mistakes on their own 🤷🏼♂️. Also… why wasted material. You could have just cut the corners and put plate over them and weld the seems. Metal is very forgiving like that. It’s not like it’s wood.
Thank you for your perspective, your perspective is very delicate, yes sir I will do as you say to save materials, rubles many others save materials as well as money, right friend, if you have any more suggestions for the old video, please leave me a message, wish you good health
Если вы говорите об уровнях навыков в TIG, это отличный способ описать прогресс. Лучший способ начать с азов и постепенно совершенствовать свои навыки. Попробуйте попрактиковаться на разных материалах и посмотрите обучающие видеоролики, чтобы улучшить свои способности. Если вам нужна дополнительная информация или конкретные советы, дайте мне знать!
Thank you for your techniques and comments, we will convey your experience to many people in the world to know your techniques, thank you, if you have any ideas, please let me know.
Maybe I'm just a perfectionist fabricator, but when I see you go to such detail and then leave the outside edges with right angles on the corner it makes me cringe! Why not add material and grind the outside corners smooth like the inside!? Great work though, don't take this as a put down of the project over all. I would have conversations with my guys at my shop all the time. We did motorsports work and in our particular market, it had to be perfection. Maybe that's why I think like this. LOL
I appreciate your keen eye for detail and your commitment to perfection! Your suggestion to smooth the outside corners is definitely a great idea and could elevate the finish even more. Thank you for the constructive feedback-it's comments like these that help us all improve our craft. Keep up the great work in your shop, and stay tuned for more projects that strive for that perfect finish!
@@TrendDIY Thanks for your comment. It's nice to talk to an adult for once on YT. LOL I agree with you 100%. Constructive feedback only makes for a better product and a more experienced fabricator. "As iron sharpens iron, so does one man another." Unless they are so sensitive they fly into a defensive hissy fit and learn nothing. LOL
блин он точно отечественный русский и никто другой. Красивый, высокий, богатый... вот чего у него нет. но у него искреннее сердце в работе и в любви Вы видели это в этом видео? Спасибо за интерес к нашим видео
@@TrendDIY I think the best and most accurate way would be to use solid steel for the corner parts with one grinded corner each and then weld it with the profiles.
Yes thank you for your interest in our video and your appreciation of our wooden jaw error we will learn from it and next time Thank you for your perspective do you have any suggestions or participation for us please leave a comment below Thank you
Ďakujeme vám za váš záujem o naše video a za vaše ocenenie kvality stola Áno, musíte byť zručný mechanik Áno vaša dobrá pripomienka Poučíme sa zo skúseností Nabudúce vyrobíme lepšie produkty, ktoré prinesú aj chvíle oddychu ako popoludňajšiu hodnotu, ktorú musíte vidieť. Ďakujem, ak máte nejaké pripomienky alebo návrhy, zanechajte komentár nižšie.
7 nagging messages to like and subscribe (in a less than 10 minute video), one before the video even starts, is a great way to make sure I definitely won't subscribe, what an irritance!
I totally get that! Overdoing the reminders can be really off-putting. It’s all about finding the right balance. What do you think would be a better way for creators to encourage subscriptions without being annoying?
Рад, что смог помочь! 😊 Если у вас есть еще вопросы или вам нужна дополнительная консультация по проекту, я всегда рад помочь. Удачи в ваших начинаниях! 👍🤝
I see what you mean. Some tasks can indeed be more time-consuming and complex than they initially seem. If you’re looking for more efficient methods or tips to simplify the process, just let me know. I’m here to help with any suggestions or improvements!
Thank you for your compliments, your compliments are our motivation to produce more meaningful and better videos to serve you, if you have any comments, please do not hesitate to write to me.
How to weld and round 90 degree corners quickly and beautifully! Welding is on another level
ruclips.net/video/A1258NH__WQ/видео.html
Love this video Thank you so much easy to follow as a beginner
Thank you so much for the kind words! 🙌 I’m glad it was helpful and easy to follow! If you have any more questions or need more tips, feel free to ask anytime. Peace! ✌️💜💙
A very good and useful video in practical application. Thank you for sharing the video
your compliments are our motivation to produce more meaningful and better videos to serve you, if you have any comments, please do not hesitate to write to me.
Tay nghề bạn rất giỏi...mong bạn chia sẻ nhiều hơn
Cảm ơn bạn đã khen ngợi! Mình sẽ cố gắng chia sẻ thêm nhiều ý tưởng hữu ích hơn nữa. 😊
Thank you for such a good video...
You're welcome! I'm glad you enjoyed it. What part of the video did you find most interesting?
These techniques are definitely not those of an ordinary welder. he comes from another level!
Thank you for your compliments, do you think our videos need to be better? If so, please send me number 1. If not, please press 0. Press it now.
Yes, I find him very great. to create a perfect product
Yes, I find him very great. to create a perfect product
Exelente wau increible te felicito maestro. Ojala todo puedan enseñar asi tal cual de una manera tal simple como usted lo hace .👍👍
@@Diy-Mr.vha.
Excellent🎉
Thank you! 😊🎉
amazing ideas! congratulation
Thank you for your compliments. If you have any comments for us, please leave a comment below. Wish you good health.
I am not a welder, but a carpenter and mason skills.. when i c this application, it is a little bit expenses and more times completing in designing the edges of to make the frame👌, ,👍 👏
Yes, thank you for watching our video as well as you have concerns about You are not a welder Yes, thank you for your evaluation and interest, please apply it to any part of your work to optimize your work, right? Yes, if you go to school or participate in anything else, please leave a comment below. Good luck and success to you.
it isn't skill. no one welds like this in the real world.
It is a good attempt.
Thanks! I appreciate that. 😊 What are your thoughts on finding a balance between creativity and sustainability in DIY projects? Have you seen any projects that really exemplify that? I’d love to hear more about what inspires you!
Una buena clase, para aficionados como yo....
¡Me alegra que te haya gustado la clase! 😄 Todos empezamos como aficionados en algún momento. ¿Qué proyecto estás trabajando ahora o te gustaría intentar con lo que aprendiste?
Hola, proyectos ninguno, de momento, tengo más de 30 años en mantenimiento de edificios antiguos, transformados en edificios para administraciones públicas, y comunidades de vecinos en el casco antiguo de Madrid, como Lavapiés, atocha, sol, embajadores.. y muchas veces hay que inventar lo imposible....y siempre vienen bien ideas nuevas, ya dice un refrán, muriendo y aprendiendo....estoy abierto a aprender siempre es y a ayudar, y enseñar a gente nueva, yo estoy a punto de dejar el tema, y la gente nueva no sabe, obligan a muchos títulos, pero la experiencia que....
Does grinding weld beads affect strength of weld joints? 6:46
Yes, grinding weld beads can affect the strength of weld joints. While it can improve aesthetics and reduce stress risers, excessive grinding might remove too much material and weaken the weld. It's essential to balance appearance with structural integrity. Have you had any experiences with grinding welds?
@@TrendDIY there is no strength in them welds in the first place was stressing me out watching you weld them joints up
Solid discipline demonstrated in fabrication with some basic mig welding tips on where to spot weld before completion. 👍
Thank you for your comment! It's great to hear that you found the tips on where to spot weld before completion useful. Solid discipline and technique in fabrication are crucial, and we're glad to share these insights to help improve your welding projects. Keep up the good work, and stay tuned for more helpful tips! 👍
Amigo que maquina e esta de solda?
Gostaria de comprar uma desta
Amazing
Good job.
Thank you for your compliments, I wish you good health.
Doing this at work this week. I'll have measurements
That sounds great! Having accurate measurements is key for a successful project. What are you planning to make? If you need any tips along the way, just let me know! 🛠️✨
Já poderia ter arredondado na própria peça inteira
Obrigado por seus comentários! Como queria ilustrar cada etapa, optei por fazer cada parte. Porém, tentarei o método que você sugeriu nos projetos a seguir!
Awesome diy technique 👍 keep it up 👏👏 bro
Yes thank you for your compliments and your interest Yes We will try our best to make videos that bring a lot of value to viewers and relaxing moments Do you have any suggestions or participation Please let us know Let us make your great ideas to send to you and the audience to watch next sincerely
Wow amazing Job 👏
Thank you for your attention and your sincere compliments. Your compliments are our motivation to make the next videos. Do you have any suggestions to make our next videos more beneficial to the audience? Please leave a comment below.
nice one coz you work safely, grinder with guard and have working gloves
Thanks! Safety always comes first when using tools like the grinder. Keeping the guard on and wearing gloves are simple but crucial steps. 🔧 Have you found any other safety tips helpful when using your tools?
@@TrendDIYawesome job. Maybe loose the flip flops👍🏼 some nice steel toe boots.
Why do you cut the removed corners at a 45 degree angle?
Cutting the removed corners at a 45-degree angle helps create a cleaner, more polished look. It also reduces any potential sharp edges and can help the corners fit together better if you're assembling multiple pieces. Plus, it often improves the overall strength and stability of the project. Do you have a specific project in mind where you want to use this technique?
@@TrendDIY I do not, I'm not a welder either. It was just something I didn't expect and I did not understand the reason for it. Thank you for clarifying.
Hello my Lovely
Very Good Very Nice your Working and your Channel Thanks so much Goodbye next time 🌹❤️
Thank you for your interest and compliments on our videos and channels. Your compliments are the motivation for us to continue making more valuable videos. Do you have any suggestions to make our videos better? Please write to us. Don't forget to spread the video to your friends. Stay tuned for our next videos. Have fun!
Smooth and slick, awesome 👌😎
Glad you liked it! If you have any more comments or if there's anything else you'd like to discuss, just let me know! 😎👌
Thank you for this wonderful video. It was both informative and enjoyable thanks dear friend for your lovely video 🔔🫶🙏🤝💚💐💐💐💐
Thank you so much for your kind words! I'm thrilled to hear that you found the video both informative and enjoyable. Your support means a lot to me. Stay tuned for more exciting content and happy welding! 🔔🫶🙏🤝💚💐💐💐💐
I'm commpletely ignorant. Which kind of welding machine do you use? Is it TIG?
Hi, I am using TIG machine and am doing 90 degree cutting and bending.
That’s a mig welder
Caranya kerja anda sangat istimewa..👍
Terima kasih banyak! Saya senang mendengar bahwa Anda menghargai kerja saya. Dukungan Anda sangat berarti bagi saya. Terus ikuti video-video saya untuk lebih banyak tips dan trik istimewa. 👍
The tick tack welding is interesting 🤨 I’d take it to the next level smooth it with car body filler and two pac prime it and custom paint it.. or power coat it
That sounds like an awesome plan! Taking it to the next level with body filler and custom paint can really elevate the look of your project. 🎨 Have you done similar projects before, or is this a new challenge for you? What colors or designs are you considering for the custom paint? And do you have a preference between powder coating and traditional paint?
ممنون از اینکه به تمام دوستداران هنر خود را عرضه میکنی از ایران به شما خسته نباشید میگم.امیدوارم موفق باشید.
خیلی ممنون از پیام پرمهرتون! از حمایت شما از ایران واقعا قدردانی میکنم. امیدوارم که همیشه موفق و سربلند باشید! 🙏😊
Good job
Thank you for your compliment. If you have any comments, please do not hesitate to write to me. I wish you good health.
Great video, great handle for a round corner table. Thank you for sharing
Your comments are the driving force for us to produce more valuable videos to serve you. If you have any suggestions, please do not hesitate to write to me.
@@TrendDIY Wishing you release many videos to serve customers. and success
Beautiful? Have it mandrel bent.
Thanks for the suggestion! Mandrel bending really does give a clean, professional look to the curves. 🔧 Have you worked with mandrel bending before? I’d love to hear about your experiences or any projects you've done!
Ótimo vídeo, muito inteligente
Agradecer!
Que bom que você gostou e achou o vídeo inteligente.
Se você tiver sugestões ou pedidos para vídeos futuros,
Por favor, contribua mais para nós
Amazing
Thank you for your interest in our videos and your comments on our videos. Thank you for your compliments. If you have a lover who is participating, please introduce them. Thank you.
I don't always weld, but when I do, I weld over galvanized (c)
That’s a classic line! Welding over galvanized can be tricky with the fumes, but it definitely has its perks. Have you found any specific techniques or tips that help when working with galvanized materials? And do you have a favorite project you've tackled using that method?
@@TrendDIY
Just got to grind the zinc off in the weld area, and try to reduce the heat input as it can still burn off in the area next to it. It's not just a health issue, but also a weld contamination concern. I don't actually often use galvanized metal for projects, was just highlighting that a special care is required.
nice. few ppl know how much work u get into a `table`.
Absolutely! Building a table involves a lot of planning, precision, and hard work. From selecting the right materials and design to cutting, joining, and finishing, every step requires skill and attention to detail. It's great to see appreciation for the effort that goes into making quality furniture!
Okay my only issue is that those round poles seem to be galvanized. Please, please do not weld the galvanization. Grind it off first. Unless you like to get sick or poisoned. Granted with good ventilation spot welding it might be "safe" but why chance it especially for welding beyond spot. If people do not know then please look up what welding galvanized metal does.
That's a great point! Welding galvanized metal can release harmful fumes, so grinding off the galvanization is definitely a smart move. Safety first! 🔧 Have you come across any other tips or tricks for working with galvanized materials? It’s always good to share knowledge and keep everyone safe in their projects!
Welded galvanized steel for years. Only got sick once and I just drank milk and I was fine.
@@davidcrumrine1165 Thanks for sharing your experience! It's great that you recovered quickly. However, prolonged exposure to galvanized steel fumes can be harmful, and drinking milk, while a popular remedy, isn't a proven treatment. It's always a good idea to take proper precautions, like working in a well-ventilated area and using a respirator. Stay safe while welding!
Перевод материала! Можно было сразу просчитать основание со скруглёнными углами.
Спасибо за ваши комментарии и обмен информацией. Я оптимизирую эту часть. Если у вас есть какие-либо комментарии, оставьте их ниже. Желаю вам доброго здоровья.
Terimakasih sharing nya....
Ya terima kasih atas ketertarikan anda terhadap video kami, ketertarikan anda menjadi motivasi bagi kami untuk terus memproduksi video-video selanjutnya untuk melayani anda, silahkan tonton video-video kami selanjutnya, Dan jangan sungkan untuk memberikan tanggapan anda kepada kami, semoga anda selalu sehat
Another spot welder
Spot welders can be super handy for joining metal quickly and effectively! Are you thinking of adding another one to your toolkit, or are you exploring different techniques for spot welding? What kind of projects do you usually use them for?
MIG lassen? Gevulde draad?
Flux-core MIG-lassen is een effectieve en veelzijdige techniek die, indien correct uitgevoerd, sterke en betrouwbare lassen oplevert.
Это уже старый метод есть гораздо элегантней и экономичней решение.
Рад, что вам понравилось это видео! Есть ли у вас какие-нибудь советы по улучшению ваших проектов DIY?
👏عالی😂
خوشحالم که پسندیدید! اگر سوال یا کمکی نیاز دارید، خوشحال میشوم کمک کنم.
"The Math" used to calculate the angles n such would've been a nice addition to the video; otherwise it's a good job
Thank you for the feedback! I agree, including the math behind the angles would add great value. I’ll keep that in mind for future videos! What specific angles were you curious about?
Kerja yang bagus
Terima kasih! Senang mendengar Anda menyukainya. 😊
Be careful welding and grinding galvanized steel. Be sure to wear the proper respirator filter as it's toxic to breathe...
Absolutely agree-safety always comes first! Galvanized steel releases toxic fumes when welded or ground, so a proper respirator is a must. Thanks for emphasizing this important safety tip! 🔧😷
Muy bien. Así puedes contar los dedos de los pies cuando quieras.
¡Exacto! Es una forma divertida de recordar cómo hacer las cosas. ¿Tienes alguna otra técnica o truco que te guste usar?
저 테이블을 저런 노력까지 들여가면서 만들었는데.. 본인 아니면 쓸사람이 있을라나? 이쁘지도 않고 가볍지도 않고.. 만드는데는 개고생이고
테이블을 직접 만드셨다니 정말 대단하시네요! 수고와 노력이 얼마나 많이 들어갔을지 상상이 갑니다. 사실 DIY 프로젝트는 결과물뿐만 아니라 그 과정에서 얻는 만족감과 성취감이 정말 크잖아요. 직접 만든 물건이니까 본인만의 특별한 의미가 있을 거예요!
그리고 꼭 다른 사람들이 쓰지 않더라도, 시간이 지나면서 그 테이블이 가지는 가치가 점점 커질지도 몰라요. 무언가를 만들 때의 경험이 더해지면 그 물건이 더 소중하게 느껴질 수도 있거든요. 혹시 나중에 다시 테이블을 업그레이드하거나 다른 아이디어로 변형해볼 생각은 있으신가요?
Yg susah itu mbuat lingkar 90drajat di pipa bulat
Ya, terima kasih atas perhatiannya, dan dukungannya. Silakan tonton video kami selanjutnya, agar kami dapat memberikan solusi untuk itu pak. Silakan tinggalkan pendapat Anda di bawah ini
warum schweisst du nicht durch?, bei der materialstärke, muss pan nich punkt-schweissen ...
Vielen Dank für Ihr Feedback. Wir werden aus Ihren Erfahrungen lernen und diese auf das nächste Video anwenden. Wenn Sie teilnehmen oder mir Feedback geben, hinterlassen Sie bitte unten einen Kommentar. Vielen Dank.
Можно было просто обработать угол и вы это знаете
😮😮
Thanks! Safety always comes first when using tools like the grinder. Keeping the guard on and wearing gloves are simple but crucial steps. 🔧 Have you found any other safety tips helpful when using your tools?
👍👍👍👍
Thank you so much for your support! 🙌 Stay tuned to the channel so you don't miss out on upcoming exciting videos!
Почему ты стоишь на столе?)
Ваша точка зрения очень тонкая. Да, сэр, и мы очень сожалеем о таких действиях. В следующем видео я научусь на своем опыте, и этого не произойдет. Есть ли у вас какие-либо комментарии или предложения? Что вы можете сделать для того, чтобы видео стало качественнее и охватило больше зрителей? Пожалуйста, оставьте комментарий ниже. Желаю вам доброго здоровья.
psst...um get yerself a metal cutting miter saw son
Thanks for the tip! A metal cutting miter saw would definitely make the job easier and more precise. I'll look into it for future projects. Appreciate your advice!
😂😂😂😂Milhões de vezes mais fácil usar o tubo e riscar em volta em duas chapas e soldar duas chapas retalgulares menos corte , menos solda, menos acabamento, e metade do tempo e os vertices ficariam realmente redondos.😂😂😂😂
wonderful Thank you for your perspective your reviews are wonderful you must be an engineer Yes sir We have tutorial videos Although it is not perfect we hope you will participate in giving more comments to make our videos better to serve more people Thank you
Need to make himself a welding table so he don't have to do it on the floor
That sounds like a smart idea! A proper welding table can make a huge difference in both safety and convenience. Do you have any specific plans for the table, or are you looking for ideas?
@TrendDIY perhaps you building a table that accommodates what you do would offer great ideas for the rest of us. You get a table, and I can get ideas cuz I'm not that smart 😂
خیلی عالی
تشکر بخاطر تشویقت
روز خوبی داشته باشید
I feel like ur doing stop motion welding. As I went to trade school for welding, it makes it kind hard to watch. Almost as hard as watching a pre-schooler drawing inside the lines for the first time. You just want to jump in and help them, but you don’t because you if you do, then you know they’ll never actually learn from their mistakes on their own 🤷🏼♂️. Also… why wasted material. You could have just cut the corners and put plate over them and weld the seems. Metal is very forgiving like that. It’s not like it’s wood.
Thank you for your perspective, your perspective is very delicate, yes sir I will do as you say to save materials, rubles many others save materials as well as money, right friend, if you have any more suggestions for the old video, please leave me a message, wish you good health
Вода. Уровень новичок...
Если вы говорите об уровнях навыков в TIG, это отличный способ описать прогресс. Лучший способ начать с азов и постепенно совершенствовать свои навыки. Попробуйте попрактиковаться на разных материалах и посмотрите обучающие видеоролики, чтобы улучшить свои способности. Если вам нужна дополнительная информация или конкретные советы, дайте мне знать!
You're spoda clean the metal BEFORE you weld it...not after.
as for welding to galvanized say goodbye to your hair.
Thank you for your techniques and comments, we will convey your experience to many people in the world to know your techniques, thank you, if you have any ideas, please let me know.
Todo ese trabajo para colocarle esas patas o bases tan culas.... Nooo mano....
Gracias por su interés en nuestros vídeos.
Que tenga un lindo día
Ok up
Thank you for your interest in our videos
and have a new day filled with joy
Maybe I'm just a perfectionist fabricator, but when I see you go to such detail and then leave the outside edges with right angles on the corner it makes me cringe! Why not add material and grind the outside corners smooth like the inside!? Great work though, don't take this as a put down of the project over all. I would have conversations with my guys at my shop all the time. We did motorsports work and in our particular market, it had to be perfection. Maybe that's why I think like this. LOL
I appreciate your keen eye for detail and your commitment to perfection! Your suggestion to smooth the outside corners is definitely a great idea and could elevate the finish even more. Thank you for the constructive feedback-it's comments like these that help us all improve our craft. Keep up the great work in your shop, and stay tuned for more projects that strive for that perfect finish!
@@TrendDIY Thanks for your comment. It's nice to talk to an adult for once on YT. LOL I agree with you 100%. Constructive feedback only makes for a better product and a more experienced fabricator.
"As iron sharpens iron, so does one man another." Unless they are so sensitive they fly into a defensive hissy fit and learn nothing. LOL
Блин точно он не русский
блин он точно отечественный русский и никто другой.
Красивый, высокий, богатый... вот чего у него нет.
но у него искреннее сердце в работе и в любви
Вы видели это в этом видео?
Спасибо за интерес к нашим видео
The corners are far away from round!
Haha, definitely! Those corners can be tricky. Have you found any good methods for making them smoother?
@@TrendDIY I think the best and most accurate way would be to use solid steel for the corner parts with one grinded corner each and then weld it with the profiles.
Was you ever told, if you don’t have anything nice to say then don’t seat anything
@@x_mac3_xwayne785 Like you? :-)
Who welds on an interior quality wood floor!?!?!?
Yes thank you for your interest in our video and your appreciation of our wooden jaw error we will learn from it and next time Thank you for your perspective do you have any suggestions or participation for us please leave a comment below Thank you
ruclips.net/video/jQRLAlLE8jY/видео.html
We
Thanks for watching, do you have any more questions?
A zabrusit na 45°c uhol čo zvárača netreba trupka tri si mezvaral ale iba lepil 😂 tak aj dlho ti vidrzi ten stôl 😂zbytočná práca 👎🤔
Ďakujeme vám za váš záujem o naše video a za vaše ocenenie kvality stola Áno, musíte byť zručný mechanik Áno vaša dobrá pripomienka Poučíme sa zo skúseností Nabudúce vyrobíme lepšie produkty, ktoré prinesú aj chvíle oddychu ako popoludňajšiu hodnotu, ktorú musíte vidieť. Ďakujem, ak máte nejaké pripomienky alebo návrhy, zanechajte komentár nižšie.
No no that not good idea.
I'm sorry for any confusion. If you have a specific topic or idea you'd like to discuss or need assistance with, please let me know how I can help!
7 nagging messages to like and subscribe (in a less than 10 minute video), one before the video even starts, is a great way to make sure I definitely won't subscribe, what an irritance!
Hey, subscribe. Did you subscribe? I can’t believe you haven’t subscribed.
I totally get that! Overdoing the reminders can be really off-putting. It’s all about finding the right balance. What do you think would be a better way for creators to encourage subscriptions without being annoying?
How do you think they could encourage subscriptions in a more engaging way?
Да где же ты был? Больше года ищу , как сделать, закруглённые углы на кровати 🛌... 😁👍.🤝
Рад, что смог помочь! 😊 Если у вас есть еще вопросы или вам нужна дополнительная консультация по проекту, я всегда рад помочь. Удачи в ваших начинаниях! 👍🤝
stupid and overly time consuming to make 1 corner
I see what you mean. Some tasks can indeed be more time-consuming and complex than they initially seem. If you’re looking for more efficient methods or tips to simplify the process, just let me know. I’m here to help with any suggestions or improvements!
A very good and useful video in practical application. Thank you for sharing the video
Thank you for your compliments, your compliments are our motivation to produce more meaningful and better videos to serve you, if you have any comments, please do not hesitate to write to me.
Hope you release more videos to serve customers. best thank you
Amazing
Thank you! I'm glad I could help. If you have any more questions or need further assistance, feel free to ask!