Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Good to see you guys are using the best cable in the industry!
We only use the best parts in our kits.
@@BustedKnuckleOffRoad Good to see. As someone who knows the cable industry, it's sad to see the junk that some folks use.
This has been the best instructional video I've ever seen
Glad you liked it.
Nice!!! Good video as well👍🏻
Thank you sir!
Great video and addressing Q & A tech issues! 👏
Glad it was helpful!
Rear Steer FTW
It makes A big difference
Great video as always. Is there a motor driven pump that is able to support front and rear or no? Thanks 🙏🏽
Yes, look up scott’s steering pump. All other pumps CAN operate front and rear at the same time but it’s EXTREMELY slow and not practical
Forget the Buggy, need this for customized road truck, like my Mega Cab 2500 on 38's going to 40's or 42's next. Even just a few degrees turning the rear makes Huge results for long truck. GM did it in early 2000's with their Quadrasteer models
there are a few sema builds using this setup
@@BustedKnuckleOffRoad 👍should be more the standard for them rather than a few.
67 JEEPSTER BUILD IN PEICES GETTING READY FOR BUILD. AINT SHURE WITCH WAT TO GO YET?
Rear steer on a 67 jeepster would be slick!
@@BustedKnuckleVideo aint quite smart enough yet for build/ retired truck driver aint worked in my small shop in 10 yrs!! startin over
Cool stuff 🙂
Rear steer is fun
Do the ride series have enough clearance to run 54x18r20?
With the right wheel offset yes. They run 46s no problem.
Curious, can this be adapted to steer two rear axles at the same time? Or would I need two kits to accomplish that?
You could adapt it to do two axles but would need two rams and such to make it work
🏆🏆🏆👍🇺🇲🙏Thank you for sharing .
hopefully this will help the folks that are interested in rear steer
Nice
It’s a sweet kit
Although this probably isn't advisable could something like this be applied to daily driver vehicles?
It could, I would think you would need to be able to lock it out at speed though.
@@BustedKnuckleOffRoad Thanks for your input and response. I was just curious.
Do you do one without the motor
we offer multiple kits with different options at www.bustedknuckleoffroad.com
So I can add this to any vehicle?
with the right parts anything is possible
Just wanted to let you know that I was sent a spam prize offer claiming to be affected with you.You can email me back if you want more information
Those are rampant for people all over the internet. Nothing we can do about them sadly.
@@BustedKnuckleOffRoad keep up with great work
Good to see you guys are using the best cable in the industry!
We only use the best parts in our kits.
@@BustedKnuckleOffRoad Good to see. As someone who knows the cable industry, it's sad to see the junk that some folks use.
This has been the best instructional video I've ever seen
Glad you liked it.
Nice!!! Good video as well👍🏻
Thank you sir!
Great video and addressing Q & A tech issues! 👏
Glad it was helpful!
Rear Steer FTW
It makes A big difference
Great video as always. Is there a motor driven pump that is able to support front and rear or no? Thanks 🙏🏽
Yes, look up scott’s steering pump. All other pumps CAN operate front and rear at the same time but it’s EXTREMELY slow and not practical
Forget the Buggy, need this for customized road truck, like my Mega Cab 2500 on 38's going to 40's or 42's next. Even just a few degrees turning the rear makes Huge results for long truck. GM did it in early 2000's with their Quadrasteer models
there are a few sema builds using this setup
@@BustedKnuckleOffRoad 👍
should be more the standard for them rather than a few.
67 JEEPSTER BUILD IN PEICES GETTING READY FOR BUILD. AINT SHURE WITCH WAT TO GO YET?
Rear steer on a 67 jeepster would be slick!
@@BustedKnuckleVideo aint quite smart enough yet for build/ retired truck driver aint worked in my small shop in 10 yrs!! startin over
Cool stuff 🙂
Rear steer is fun
Do the ride series have enough clearance to run 54x18r20?
With the right wheel offset yes. They run 46s no problem.
Curious, can this be adapted to steer two rear axles at the same time? Or would I need two kits to accomplish that?
You could adapt it to do two axles but would need two rams and such to make it work
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing .
hopefully this will help the folks that are interested in rear steer
Nice
It’s a sweet kit
Although this probably isn't advisable could something like this be applied to daily driver vehicles?
It could, I would think you would need to be able to lock it out at speed though.
@@BustedKnuckleOffRoad Thanks for your input and response. I was just curious.
Do you do one without the motor
we offer multiple kits with different options at www.bustedknuckleoffroad.com
So I can add this to any vehicle?
with the right parts anything is possible
Just wanted to let you know that I was sent a spam prize offer claiming to be affected with you.
You can email me back if you want more information
Those are rampant for people all over the internet. Nothing we can do about them sadly.
@@BustedKnuckleOffRoad keep up with great work