1500HP Procharged Ford Rock Bouncer Build - TANTRUM pt1
HTML-код
- Опубликовано: 16 июл 2020
- After building Gold Rush we knew we had to do something crazy to raise the bar. Well with our latest Rock Bouncer Build we think we did just that. Introducing Tantrum the rock buggy formally known as Goliath. We started with a Busted Knuckle Off Road Shop Ride Chassis and redesigned the back end to make this one of a kind. Then we threw a set of one off Chromoly Sheetmetal Housing Meritor Axles underneath it. Of course it got trailing arms in the rear and a traditional 4 link suspension up front. Then we went all out with some massive Blacked Out triple bypass Radflo shocks on the front and matching Coil carriers to control the Massive 46" USD sticky tires on custom beadlock wheels. This rock bouncing rig is nothing short of a monster. The part that really sets this build apart from the rest is the Procharged 416 cubic inch small black Ford motor that should throw down close to the same power as Gold Rush. We are taking around 1500 horsepower on Race Gas.
#RockBouncer #Procharged #FordPower
Official Busted Knuckle Merch - www.bustedknucklegear.com
BKF Facebook - / bustedknucklefilms
INSTAGRAM / bustedknucklefilms
SNAPCHAT- / bustedknucklefilms
TikTok- / bustedknucklefilms
AMAZON PRIME- www.amazon.com/v/BustedKnuckl...
Buy Off Road Parts- www.bustedknuckleoffroad.com
Check out our New BKOR Shop Channel- / @bustedknuckleoffroad
Become a Member- / @bustedknucklevideo
Big Thanks to our sponsors
www.bustedknuckleoffroad.com
*SEND US FAN MAIL*
Busted Knuckle Off Road
5270 AL HWY 69 South
Cullman, AL 35057
United States of America 
Авто/Мото
Check out Part 2 to see what this Rig looks and sounds like in full Color!
ruclips.net/video/4sQ3Hyvpl0M/видео.html
I don't know! Is a good name!
also like , little sketchy
nothing little about this rig
As opposed to Black and white? Would you show this overpriced overhyped rig in black and white? This channel is like the slow version of dumb.
I LOVE IT! Extremely well engineered, incredible attention to detail, and even better IT'S A FORD!
I like everything but the engine HA
Why ?
I’m asking why you hate the engine?
Frigging Oakies Really Diggem.😊.Ford is America's best .No burrock ohbummer bailouts.
Just found your channel and there simply is no one else doing this ridiculous level of quality, creative, and awesome builds!
Glad you found us! Thanks for saying that we build a lot of these machines now.
I never knew the work that went into your buggys. I like to see the pains you go through to ensure the highest quality. It's built 2 times. Awesome talent guys!
Right on
That's Awesome - I could have happily watched a hour of that... Can't wait to see the next episode!
Glad you dig it. Next episode should be out in a few weeks
That thing is absolutely crazy cool! and a complete work of art at the same time! Name an artist who could put one of these together in a sculpture piece like your guys have!! You're all amazing engineers and craftsmen!
Thank you we have a lot of hours in it!
@@BustedKnuckleVideo how much does a buggy like that cost
As a Jake, who knew this Jake at a mid-Jake stage in is mastery of Jakeness. He's about the best, so get your jolly's off while you can.
Jake of All Terrains still gotta long way to go but getting there 👊
That is an absolute amazing build! A piece of art. It is fascinating to see the craftsmanship that goes into one of these. Goals for the Bug! ❤️🐞
Thanks we put a lot of hours into them that is for sure
Takes a lot of man hours. Just keep pushing
Only Tim Cameron expert excellent Rock n Roll the champion
What does that have to do with this video?
AWESOME VID as always! Thank YOU!!
Thanks Tommy!
Wow that buggy is amazing cant wait for the next episode I love these build videos keep them coming wow
More to come!
Amazing. You build Beasts. So well explained
gafrers thanks! 👍
I really like these in depth analysis of the vehicles with all the details
Glad you dig the format. I feel like they are getting better!
That's epic. Very good fabrication, well done!👍
Glad you like it!
Great vid guys! Glad I watched this before I did my interior.. phew! So much easier seeing how the pros do it.
Glad it helped!
Thank you sir
Amazing! Great work team.
Longhorn84 we do have one heck of a team
Parabéns pelo trabalho e pela humildade em mostrar todo o projeto ... Vocês são muito caprichosos e detalhistas ... Todos os detalhes. Muito bem projetados !! Aqui do Brasil prestigiando o seu trabalho!!
Omg. U really outdid yourself this time man, that's a BEAST!!!!!
It is a mean one for sure!
Thanks, we cant wait to show everyone the finished project
Damnit Man!!! That's awesome.... dream rig for sure. 💪🏼👍🏻😎
Rick Marquart it’s one of a kind for sure
Damn but you guys do some seriously excellent work!! I am beyond impressed!!
Thanks Pat!
That buggy is crazy, this is so far beyond my level, hopefully someday I can evolve enough to mess with this caliber of off road vehicles.
They take a lot of R&D on these custom builds
Jake, sounds like your being modest. I'm sure it's taken alot of trial,& error. But you visualized that dash, I had no idea what your were talking about til I seen it. I can fab,& turn wrenches, etc. But you got a talent.
Charles Donley getting it out of your head and onto metal is the hard part
@@BustedKnuckleVideo Well I cant visualize in my head or fab, lol. I can just fix stuff sometimes, I have a tiny bit of welding skills and I want to make a career change to welding, really because it applies to my hobbies so much.
@@BustedKnuckleVideo was this Buggy renamed Gold Rush?
Best Offroad Channel on RUclips by Far!!🔥🔥💪👊
Thank you that means a Lot!
That is INCREDIBLE, great job
Thank you! Cheers!
Seriously badass. Can't wait to see it running. Really want to see jake back racing also so hopefully he gets to build his rig next.
the new one is almost a roller, but I doubt he does much racing
I can't get enough of this ! I love this type of work . Some of these videos I've seen blow my mind. Keep them coming. The busted knuckles symbol I love it's going to be my next tattoo. 👊 keep up the great work..
It is a lot of fun, I actually have our logo tatted on my calf. It was my first and only tattoo.
Those axles look awesome
They are BEEF!
Space aged looking
Coolest thing I’ve ever seen
One day I will buy one
It is a wild machine.
Awesome work guys 👍
Thank you 😀
Thanks 🙏
Those are some cool looking tires.
You should see them now that they are cut
Damn fine work.
Thanks a lot of man hours in this one!
Woah! That is insane engineering! Such a great skill, I wish I can be someday... anyways... very awesome project and I even clicked on it IMMEDIATELY when I saw it😁
Thank you very much!
Awesome video thank you
Glad you enjoyed it
Those are certainly marvelous buggies that you guys build Jake.
Thanks we have some great employees that help put them together
Good information thank you very much
Glad it was helpful!
I really like how Jake considers access etc. for later on in case of repairs needed
He knows from experience
Unlike an automotive engineer who just says, "that's gonna be a real bitch to get to if it breaks...oh well, not my problem!" I might be speaking from experience working on cars.
I can barely imagine the amount of works JUST in the initial stages of design, tube bending, welding, etc and thats just the begining!! great work as usual and pushing the limits with those axles, great work keep it up !!
Im actually about to order some things from you that its going overseas (south america) but we are back again into a extreme quarantine/lockout, so itwill be at least a month from now, meanwhile keep the videos coming !!
A straight forward build will have 550 man hours in it. This one has many more than that
so many hours it is crazy
That's fooking insane! Yall build working masterpieces!
this was a mean one
This one is amazing. Of course all your builds are sick but this one is just nasty looking. Gotta say my favorite part is the wiring and plumbing. The way you conveniently run all the guts together down the tunnel is so slick and clean.
Just like a cable tray
good plumbing and wiring is key to not having issues
AMAZING !
It’s one mean machine
Thats going to be insane!
We are pumped about it. It sounds soooooo NASTY!
It is seriously bad
You guys have done an excellent job showing and explaining how you built this bouncer. Very impressive. If only I could afford one. Thank you
You can do it!
I love when anything gets powered by Fords engines, Diehard blue oval always! This rig is gonna be so bad ass. Cant wait till the 7.3 Godzilla V8 starts gettin jammed in some projects
havent seen much on the new 7.3
yes love my fords
Wow this is the first time I've seen one of your builds you are awesome the build is epic And this Is a totally legit channel love it🤓🥳
Wow, thanks!
Beautiful 💯❤️
Thanks!
Procharge trend.
I like it!
Cheers!
I prefer roots style supercharger
@Busted Knuckle Films it has better low end & effective boost across wide range. Just not compact as centrifugal. 🍻
there is nothing compact about this massive procharger
Verry nice guys. Absolutely meticulous work. This thing is definitely loaded for bear
Thank you very much! We just released a new build video today.
Absolutely next level. Can’t wait to see it done. Bummed Jake decided to not build his own buggy yet.
Brandon C his is on the chassis table now no worries it won’t be long 👍
You were not joking. That thing will be a beast when it’s finished.
Just wait until you hear the engine
Such a beast
Building a killer buggy while wearing crocs!! Love it, kinda looks like gold rush to me...
Robert Schleicher they are all designed to have a similar look so there is no mistaken when you see a busted knuckle buggy on the trail
It might just make more power. Stay Tuned!
Remember when crocs were a bad meme?
Do you know why crocs have holes in them? So your dignity can escape lol
What you are doing is just amazing. Level above all. Hope I can make my dream come true one day. Enjoy all the videos you upload waiting to see more. Greetings from Israel.🇮🇱🇮🇱🇮🇱🇮🇱.💥💥💥
Thank you very much!
Hello
Watching this from Mexico
Thanks for Tuning in Craig!
Man, that is a SICK buggy. Wish I had the money to throw to you guys to build me something like this.
Can't wait to see the finished product!
We are ready to knock it out of the park when you do.
We have some really affordable buggies. Give me an email, you may be surprised how low the price can be jake@bustedknuckleoffroad.com
amazing explanation
Alberto Neri thanks! Thank you for watching!
Glad you liked it
Excelente diseño me gusta... Saludos n. L. Mexico
Man that's a beast 💪 hell yea love it. I got a cj7 with a supercharger I love it .but this thing is off the ⛓
Right on
Nice!!!!
Thanks!
Nice buggy can not wait till you finish her
Should be finished up this week
That's do bad ass. Y'all do some incredible work man. Serious talent an 1 hella nice shop. Wish i had $$ few of those cost yo build
Thanks we are working on making them more affordable. Our new production turnkey rigs start at $80k
Bad ass Jake. Love the builds and documentation of them you guys turn out.
They keep getting better
Busted Knuckle Films for sure dude. Maybe I’ll win the lotto and have you guys build me one 🤞🏻
we are ready when you are, we are working on making them more affordable for everyone so stay tuned
Busted Knuckle Films I’m should* be finishing my Rig (YJ-6) in the next month. Trips in the SE are going to be plentiful soon. Maybe I’ll see you guys out on the trails.
Awesome 🤙🤙🤙
Thanks 🤗
Saludos desde Argentina!!!!!!🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷
👊👊
Not even NASA can do a job like this!. Great .
Agreed
Meu sonho e ter um deste 🤩🙏
Pffffftt.. 1600 horses, is that all.?!
I mean, are you even an insane engineer.? 😜 LOL.
That thing is EPIC, I love it.!
so much power
Sweet build boys!! And a ford engine holy shit rite down my alley but much bigger! 👍 great stuff
It's should be pretty powerful
Essa máquina e muito top ,
What’s up Jake it’s Eric from Oreillys back in the day. Lol. I’m proud of you buddy and knew you would make it big when you welded up a long arm kit on your 89 Jeep in the parking lot of your apartments. Hahahaha. Who else does that.... Jake.
Build0001 hey eric! Good to hear from you man! Ya i got evicted for that 😂🤣. I remeber having a welder and torches in the laundry room instead of a washer and drier 😁😁😁😁
You are not a true offroad if you have never moved a dryer to plug in a welder
@@bustedknuckleoffroadllc5060 washer and dryers are overrated! Off-roaders always find a nice pond to rinse off afterwards. Ha. I have been watching these videos of yours and I’m thinking; Jake came a long way from climbing the light poles at work. Lol. I don’t have FB so I will email with ya soon.
Legal mesmo 👏👏👏👏!
Thanks!
So glad to hear they didn't take the cheap way out and put a piece of crap Ls motor in there. So nice to see a FORD motor sitting in there.
The Ford engine was impressive on the dyno
Cool I like it
it was one mean machine
Ojala que estas super maquinas tengan sales 🤤
Nice ❤🤙
Thanks 🔥
HELL YEAH for the pushrods!!!!👑
gonna make good power out of this one
@@BustedKnuckleVideo For sure, I'm making 1037 from my 331 with 26 pounds of boost from my Vortech.
Nice. This one should make over 600 at the tire with a 55-60% loss through the drivetrain
Hello .. Good night! I'm crazy about such a machine, what a wonderful wonderful job. How I wanted a car like this 👏👏. watching the videos of these machines is fascinating. congratulations on the work
Thank you very much!
How much would you sell me a 3D project for? for me to try to build a vehicle like this for me? I would also like to know how much a vehicle like that costs in dollars there?
Our turnkey builds start at $80,000 USD. We sell chassis at www.bustedknuckleoffroad.com
@@BustedKnuckleVideo ok thank you very much for your attention. I'll take a look. ”
Very nice! That's not a power glide, it's a turbo 400. I've built hundreds of them since the 1980's.
Did someone say powerglide? For sure a TH400
@26:46, Sounding a little Canadian there brotha, Rooof¬ Ruf! Awesome bro, had to point it out I know. Shout out from Timmins, Ontario Canada. Wicked vids and Crazy-Wild builds man. Thank you for taking the time to share you Blood, Sweat and Heart. "Passion Drives Perfection". GOD Bless.
Thanks!
@@BustedKnuckleVideo They named it Tantrum? Would suit it..
yep
wew guys good job,i should hv mine
Thanks!
genial! que tubo - cedula utilizaron?
I seen the camera back,& forth thru the shop. Your there late night, & building. Wheres your crew at Jake? Everyone take vacation? Im not saying it looks like they showed up after all the work was done! Hydraulic pipe bender!! Thought you bent that stuff by hand 💪 LOL
Most of this is shot after hours when the crew has gone for the day, you see them there once we start tear down though.
thank you information buggy
nmkz anime your welcome, thanks for watching
Thanks for tuning in!
I would love to build one of these. I live right around the corner from your shop and stoney. But I'll have to stick to my crawler for now.
Y'all build some amazing machines!!
Andrew Pratt thanks Andrew we are working on making them more affordable
@@BustedKnuckleVideo that would be awesome!! But it'd be a long minute before I could even think about building one. I do love the machines y'all put out. Keep making those awesome works of art!!
Man, wish I could get into the Bounser scene!! I have the PERFECT project name!!! Go figure,now just land about 300k and I’m in the game!! Come on Lotto!!! Hit!!
Our turnkey builds start at only $80k
Still rockin the crocs 👍🏻👍🏻
every day
This is a dream to have something like this in Australia! Sad thing is we can only take it to comps.. if we got caught with that on a trail we would be screwed
that sucks
Damn Jake getting us this far of total build you're not being able to see the finished product, that's like cruel and unusual. Lol. Can't wait to see this bad boy finished.
We like the 2 part episodes so you don't have to watch an hr long video
@@BustedKnuckleVideo I like the suspense
Dang that’s what I need.
Everyone needs a 1500hp rock bouncer
Busted Knuckle Films or 2
Lets do it mike, we can have you rolling in no i
Time
Instead of those 90 degree AN fittings try using Banjo fittings -- You'll find they will flow more and be a lot tighter turns...
Which fittings are you talking about?
muito top
Big like
Wowwwwwww
👍
Racing passión 🤙
love racing
Fabulous rock rocket...you must be familiar with a fellow imagineer, engineer and builder Mike Patey. Mr Patey builds airplanes... you might enjoy his latest build Scrappy...as he would enjoy your 1500hp thermo-nuclear missile build...Thanks
millicent squirrel hole i have watched some scrappy build videos. Really cool
Will have to look that up!
Una pregunta, que tipo de tubo utilizas para el chasis de tus autos.
Legal 👍👍👍👍
Lethal
Great to see another Ford build....
P-Nut 420 it was a huge learning curve. It really impressed us yesterday on the dyno
that Ford Power came to life on the Dyno yesterday, Stay Tuned!
I built a 632 CI chevy for a monster I'm building. It's for the outdoorsmen.. it's big but nice.
that's a big motor
Love the builds, not really Ford or Chevrolet fan. A hemi would really bust it!
Just need a client to want one and we can make it happen
Just the sickest shit I have ever seen!
Did you see the finished product? ruclips.net/video/4sQ3Hyvpl0M/видео.html
Nxt vids plsss iam soo xcited to watch this dammm
Should be out in a few weeks
I don’t mean to rush you or anything, but HURRY UP WITH PART 2!! LOL!!
Ah yeah, the mockup driveshaft. C.A.D. (Cardboard Aided Design) at its best! ^_^
You know it!
This rig might give gold rush a run for it's money in the power department
True