Wireless Backup Parking Sensor installation guide
HTML-код
- Опубликовано: 2 июл 2024
- This is a step by step guide on how to install a wireless parking sensor system in the front and rear for any car.
If you haven't yet purchased this system click here to buy:
www.tadibrothers.com/products...
The system in this video is perfect for parking, backing up, and parallel parking.
Very easy to self-install and Tadibrothers gives you all the components needed to make the installation clean and reliable.
If you already have one of our systems here is what you need to do:
1. Place the display or speaker in the desired location (i.e. in front you’re your steering wheel or above your mirror)
2. Connect it a 12-volt power source (usually found under your dash)
3. Place the “Brain” of the wireless sensor system in a convenient location in your trunk (keep in mind that the sensor cables will feed into that box)
4. Install the sensors by distributing them evenly across your bumper and use the included drill bit to make holes in the vertical center of the bumper
5. Connect the brain to constant power source (red and black wires)
6. connect the triggers to the reverse and break light (White and White/Black)
For more tech support or assistance on buying this product
please don't hesitate to call us at 866-966-5550 or go to www.tadibrothers.com/ 
Авто/Мото
Good video. What is the maximum distance between brain and display?
Is there any way to mount a product like this on an alloy track back vehicle (aka "ute") and it still operate correctly?
And how is it doing in bad weather such as heavy raining?
What if vertical spot on bumper is below 18”? Can the system continue working?
Also what is the minimum height of obstacle that these sensors pick up?
Thank Q
does the right side of the display shows the distance of rear sensors and the left side of the display shows the distance of front sensors?
Hi on my set up the red wire is my acc ...ALSO its my reverse light so do i wire the yellow an red cable together . Cheers
What is the average time of installing front and rear?
What do you suggest for front 2 or 4 ?
Yes this is Robert grinning and I'd like to know how much the force the eight sensor unit is
Hi Robert, I’m not sure I understand the question. Please call us directly at 866-966-550 and we will gladly assist you.
Question will be asked later.
Phil Watched Video
and how is that Wireless?
Thats a great questions, thanks for asking. Wireless refers to the connection between the sensor brain that is usually placed in the back of the vehicle and the display/speaker that is placed in the front. A truly cordless system does not exist because its need a constant 12 volt power source to know when you are going in reverse and it needs the reliability of the vehicle power. Imagine if it was battery operated and the power would go out just when you needed it. its a safety issue, and Tadibrothers is in the safety business. Thanks for the great questions :-)
thanks
Thanks for the reply. we would love to see these Parking Sensors in action. especially the front bumper sensors. if you could do that’ll be great.
Wireless??? 🤔🤔
How’s this wireless 😭😭😭
Hi, wireless refers to the lack of cables between the brain and speaker/display
I hope that answers your question, if you need any further assistance feel free to call anytime at 866-966-5550
Take care
This is not wireless
Hi, It is 100% wireless between the speaker and the control module (the brain)
Let me know if you need further explanations.
This isnt wireless dude. Bye
Hey Paul, Wireless doesn't mean cordless. The Display/Speaker component use 12 volts and the sensor need to be plugged into the sensor brain as well as a separate 12 volt power source. Otherwise you could not power the system or tell it when to trigger. The wireless portion is between the brain and the display/speaker, it saves you the process of threading all the wires from the back bumper of the vehicle to the front dash. I hope this helped and have a great week