You should install this on your rx350 and mount the beeping screen on top of your rear view mirror I’ve driven one with the same setup it was good and you can install front sensors too then it will feel like a higher trim
I'm an installer also and I have to say this was an excellent video from your installation technique to to your explanation of the product itself the only thing I might have done different is mout the display indicator to the rearview mirror but that's just a preference I do have one question about the quality of the sensors themselves and that is do they look like they can be painted to match the color of the bumper cover without causing any damage or hindering the performance
the secret to a good install i.e. the actually work correctly are the angle adjusters that come with the sensors my limited research on the RUclipss has told me. If you bumper is pretty vertical it may be ok but most are not hence the need to adjust the sensors - you can't just install them at the point on the bumper where is mostly vertical I believe. Not sure if that helps and the OEM Bosch kit is about 250E here in Germany on eBay I believe - this is the hardware that will be used by most german car manufactures so probably works well - but hell if you can get a $20 kit to work then I say go for it - my shitty $30 backup camera does a good job so that may be an easier option.
Very good that it has actually tells u the distance. I work valet and i dont think any car tells u the distance with a number. They just show lines or bars.
You sound like Jeff from the animated series American Dad, lol. Great review by the way, we get the same in India but it costs about 15$ and not 10$. Still, a steal deal at the price.
I intall the 8 Sensors parking (front and back) for 36 Euros, and it work really well - toyota verso 2016 -. But on that car - toyota verso - you have to take a long moment to put it on. It's necessary to put down the bumper and all inside left protection ouh!! just be patient and cool. but after it's easy too connect it when all wires in place
So you Just connect the 12 Volt Power Wire with the reverse one and it gets the power from it, and the other Ground power wire with some piece of metal ?
Would installing rear parking sensors overload the reverse circuit, considering that some vehicles already have a backup camera or an aftermarket camera installed?
Thank you. Loved how you speak, explain and demonstrate, you're a good teacher. Very informative. Now I am not so naive of how it works, though I don't plan on doing it myself 🤣 Wish I could hire you to do mine.
Liked the demo. The only thing I would have added would be...you know how the shoppers race out of the store with kids in strollers - even when your already backing. Well, I wish you could have shown yourself walking at a pretty good clip, two or three foot behind the vehicle while in reverse. That would really demo how sensitive it picks up a moving pedestrian, child, or pet. Maybe you could ad that on another video. Thank you.
Quick tip: instead of stripping the wire and soldering, simply use a quick splice wire connector or a T-tap wire connectors. Piece of cake - takes a few seconds, looks neat, easy to disconnect, cheap - no wonder some parking sensor kits contain one of these.
There are a lot of people who have mounted it on the ceiling panel upholstery of the car so when they look back to reverse it gives them the signal there
Is it possible to remove the audio beeps and just the visual screen? How about is it possible to change the default longest distance from 2.2m to 0.8m?
I want to install this on the front bumper but want to see what's involved first. Would you please post a scan of that part of the installation manual? Thanks
Let's say I install a couple of these things in my front bumper; how would I make use of the front ones? I suppose I would have to route the wires to the _Drive_ function; hopefully it won't beep above a certain speed.
so the red wire goes to the positive wire of the back light and the black wire goes to the ground or the chassis of the car, can i also connect it to the negative wire of the back light instead of the ground?
How do you install the sensors on the front?I mean you connected the wire to the brake light .Suppose I want to instal the sensor on the front bumper ,where to connect the power wire?
to fit the provided hole saw, which size of a driller do I need? I mean, I have to put the bit of the saw into the driller. So, I need to know which size of the driller should I buy?
do we have to connect it to the speaker of the sound system or there is a seperate buzzer inside the display because im having the same sensor which is to be connected ...so do let me know
Good video ! But I already do it much simple : I took it one siren ( from alarm). And connected wires to revers wires. So when I put in reverse it's bip bip ... P.S. So anyone run away! hahaha
Q: Has anyone installed aftermarket sensors (4 sensor type) onto the FRONT of the car? Wondering how to cut power to control box (automatically) say at speeds above 10mph.
Thanks for the video, the installation looks straightforward, I 've got a 4x4 vehicle, it's got a spare wheel at the back of the vehicle, how good is the parking sensors?
Love your video. How can we make the sensors pick up and beep...oh, let's say, about 8 to 12 feet away? Can these sensors do that, if not, what does one have to do to the gadget to make it happen, or does one have to buy a different and more powerful sensor? What do you recommend?
I'd use a switch, that I don't normally or rarely use, like a front fog lamp to activate the front sensors. Or even better if you install a switch for it and name it as the parking sensor switch.
Was just in that van the other day and used it to park on the street. Works good so far. Hasent seen snow or salt yet so we will see how it does this winter.
so I really am interested in this, but I am not too keen on the LED display. It will clash with my interior. Can I mount the display maybe on the rear deck and still be able to hear the audible alerts??
my 2003 rav 4 came with it but it got damaged. it's located at the left and right gray bumper. i bought one but I don't know where to put the four. do you think I can just install 2?
Has anyone hooked it up to a display ? I wanna do the same and just have sensors on my back camera regardless. But I wanted to know if anyone had tied to turn that sound down and or change the board it’s self to change the sound
![The BEST Wireless Parking Sensor for an Affordable Price! (FenSens) [4K] 21:9](http://i.ytimg.com/vi/REjkpN6Ox4M/mqdefault.jpg)
Everyone commenting how he says man a lot... Not about how amazingly helpful this video was.
Yeah, man.
Thanks so much for taking the time to do this video- I've just received my sensors and this has been massively helpful and detailed!
You should install this on your rx350 and mount the beeping screen on top of your rear view mirror I’ve driven one with the same setup it was good and you can install front sensors too then it will feel like a higher trim
I'm an installer also and I have to say this was an excellent video from your installation technique to to your explanation of the product itself the only thing I might have done different is mout the display indicator to the rearview mirror but that's just a preference I do have one question about the quality of the sensors themselves and that is do they look like they can be painted to match the color of the bumper cover without causing any damage or hindering the performance
It's been four years. I guess will never know.
7 years now guess we’re still waiting 😅😂
man enough saying man all the time man
the secret to a good install i.e. the actually work correctly are the angle adjusters that come with the sensors my limited research on the RUclipss has told me. If you bumper is pretty vertical it may be ok but most are not hence the need to adjust the sensors - you can't just install them at the point on the bumper where is mostly vertical I believe. Not sure if that helps and the OEM Bosch kit is about 250E here in Germany on eBay I believe - this is the hardware that will be used by most german car manufactures so probably works well - but hell if you can get a $20 kit to work then I say go for it - my shitty $30 backup camera does a good job so that may be an easier option.
Very good that it has actually tells u the distance. I work valet and i dont think any car tells u the distance with a number. They just show lines or bars.
Man that's really great for 10 bucks I just bought one from Amazon I think I paid $32 for it haven't hooked it up yet but like the way you hook it up
You sound like Jeff from the animated series American Dad, lol. Great review by the way, we get the same in India but it costs about 15$ and not 10$. Still, a steal deal at the price.
Great and understandable description, but I think the most difficult for DIY is to wiring the sensors to inside the bumper/ car interior.
You’re so high energy lol I love it
I intall the 8 Sensors parking (front and back) for 36 Euros, and it work really well - toyota verso 2016 -.
But on that car - toyota verso - you have to take a long moment to put it on. It's necessary to put down the bumper and all inside left protection ouh!! just be patient and cool. but after it's easy too connect it when all wires in place
So you Just connect the 12 Volt Power Wire with the reverse one and it gets the power from it, and the other Ground power wire with some piece of metal ?
Yep as long as the metal is grounded to the body
@@DNALI can i also connect the black wire to the negative wire of backlight?
Would installing rear parking sensors overload the reverse circuit, considering that some vehicles already have a backup camera or an aftermarket camera installed?
Very good - simplified instructions : I just got a digitru reverse parking sensor -- This helps a lot. Thanks.
Thank you. Loved how you speak, explain and demonstrate, you're a good teacher. Very informative. Now I am not so naive of how it works, though I don't plan on doing it myself 🤣 Wish I could hire you to do mine.
Liked the demo. The only thing I would have added would be...you know how the shoppers race out of the store with kids in strollers - even when your already backing. Well, I wish you could have shown yourself walking at a pretty good clip, two or three foot behind the vehicle while in reverse. That would really demo how sensitive it picks up a moving pedestrian, child, or pet. Maybe you could ad that on another video. Thank you.
You said tap red to brake light? i thought it should be reverse light.
For power hes using brake light
Yes, connect it to the reverse ofc
@@scottishlad6490 no it should be connected to reverse light for power.. U only need it on when you're reversing..
I think he connected to reverse light..
Not sure why, but it's really nice to listen to you explaining shit. Thanks for the great review and installation tips.
Is there a way to flip the display around? If you install it the other way around wouldn't the numbers be upside down?
What does the numeric display indicate; is that metric or or Imperial units?
Great vid, now I feel confident to do a install on my old saab 900 :)
Quick tip: instead of stripping the wire and soldering, simply use a quick splice wire connector or a T-tap wire connectors.
Piece of cake - takes a few seconds, looks neat, easy to disconnect, cheap - no wonder some parking sensor kits contain one of these.
Nice video, that sound would drive me nuts
There are a lot of people who have mounted it on the ceiling panel upholstery of the car so when they look back to reverse it gives them the signal there
Is it possible to remove the audio beeps and just the visual screen?
How about is it possible to change the default longest distance from 2.2m to 0.8m?
I want to install this on the front bumper but want to see what's involved first. Would you please post a scan of that part of the installation manual? Thanks
Instruction was unclear got my car flipped over.
PC Gameplay HD what a shame
Sucks just reverse the instructions u did for right side up car
Did I answer all ur questions in a timely matter ?
My car exploded what are you talking about
hahaha
Did you try turning off and on again?
Let's say I install a couple of these things in my front bumper; how would I make use of the front ones? I suppose I would have to route the wires to the _Drive_ function; hopefully it won't beep above a certain speed.
You'd have to be up the arse of the car in front for these to go off whilst driving...LOL... Just wire them up to the cigar lighter socket..
Wow they actually give you the drill bit.....cool
I'm wondering if you put 2 sensors at the rear activated by the reverse, how could you activate 2 sensors installed on the front ?
You don't. You go on eBay and by a "8 sensors parking kit", so you have 4 front, 4 back. They are 1,5x as expensive, but made for that purpose.
How long are the wires to install it in a 2017 toyota Tacoma? Thanks
Really good instructions, but is there a way to add turn on & off switching
Cut the + wire from the power and add a switch between
so the red wire goes to the positive wire of the back light and the black wire goes to the ground or the chassis of the car, can i also connect it to the negative wire of the back light instead of the ground?
i liked it buddy...! you did a grt job in explaining it.
How do you install the sensors on the front?I mean you connected the wire to the brake light .Suppose I want to instal the sensor on the front bumper ,where to connect the power wire?
You can tap into any wire that has constant power when the car is on.
to fit the provided hole saw, which size of a driller do I need? I mean, I have to put the bit of the saw into the driller. So, I need to know which size of the driller should I buy?
Great Tutorial!! Did you purchase it from Amazon or Ebay? Thanks!
Thank you my friend. You made it look very easy. and it is.
Hi, for the 8 sensors kit, the brake light signal and ACC are also needed. Are they also in the same bunch of wires?
Thanks for the video! Very informative!
i just took in. you said "YEAH!" when the video started
do we have to connect it to the speaker of the sound system or there is a seperate buzzer inside the display
because im having the same sensor which is to be connected ...so do let me know
Do you think this will work for my 4 door truck? Like the length of the wire??
Great video man!
Great vid and thanks from north Wales UK
hi. great vid . what are those sensors?. . infra red?..or what?...
Ultrasonic
Great video. Clear and showing everything thanks
great diy video and even better with the range testing.
Super video I congratulate you, a very clear language.
Good video ! But I already do it much simple : I took it one siren ( from alarm). And connected wires to revers wires. So when I put in reverse it's bip bip ... P.S. So anyone run away! hahaha
That's illegal.
@@alejandroperez5368 so
Q: Has anyone installed aftermarket sensors (4 sensor type) onto the FRONT of the car?
Wondering how to cut power to control box (automatically) say at speeds above 10mph.
Thanks for the back up sensors installation tip, how to install a day light light on when car started?
That was great! thankyou mate
Very cool! I'd be afraid to drill in my new cars bumper though. Maybe in our older ride.
Im sure youd rather drill it than reverse into sonething causing damage
Nice video thanks, it starts beeping as you mentioned from 1 ft away, Any sensors available starts beeping from about 4 feet distance
Where is the beeper in this thing. Is it in the LED display or in the control box?
You can buy it without the LED display & just a beeper on ebay... not much difference in the price
Thanks for the video, the installation looks straightforward, I 've got a 4x4 vehicle, it's got a spare wheel at the back of the vehicle, how good is the parking sensors?
What a nice guide, thank you very much.
How long did they last?
Hello, I have opened the black box.and it has some potentiometers inside forA B C D. do you know what are the for?
Manosspan1 - Potentiometers A, B, C and D are to fine tune the sensitivity of each sensor.
After some search, I dont think these are potentiometers. Look this article here www.candrian.gr/index.php/category/electronics/
Man That's amazing 😃thank you for the review
Hi, silly question... can I test them right out of the box just by connecting the wire directly into the + and - in the car´s battery?, thanks.
Yep you should be able to test it like this
Great job and makes it easy for me,
Can you udjust the volume?
Can you used this one for low front bumper on parking curves
Same thing I want to know they are hell on hondas
Love your video. How can we make the sensors pick up and beep...oh, let's say, about 8 to 12 feet away? Can these sensors do that, if not, what does one have to do to the gadget to make it happen, or does one have to buy a different and more powerful sensor? What do you recommend?
Can it be used for the front as well. And how does it turn on if it on the front bumper.
Thanks Mike
I'd use a switch, that I don't normally or rarely use, like a front fog lamp to activate the front sensors. Or even better if you install a switch for it and name it as the parking sensor switch.
Can this same sensor system be used on a silverado pickup truck?
really helpfull thank you man.
hey man, what was that man, did you really man, ... it goes on and on ...
"We are Darwin"
Hi- i need to extend 2 senors about 3 feet each. What guage wire do you recommend? Ty
Use the same one as it is
Do you have to use the heat shrinkage part or will it still work just from being wound up ?
It should work with just electrical tape
Hi, is the sensor install show UP when push in? Tq
Who is looking forward, at the indicator, when you are backing up?
Do we have to install the little display?? I really dont want to. I just wanna hear the beeping from module.
Pretty sure the beeping comes from the display - I guess you could tuck it under your seat or something if you really didn't like it.
Where can i find that shrink wrap stuff on aliexpress? I mean what do i need to type
Ive got something simular on aliexpress still works after 6 years
Hi guys
Any idea how connect the front parking sensors ??
Can I see electrical tape instead of heat shrink or soldering the connection? Thanks.
Winson Yu yes you can use electrical tape, you can use anything that is fire resistant and will stop the current from becoming a hazard
Do you think painting over the sensors would affect the performance of them?
Yes ofc
What size hole did you drill for these specific sensors?
LuisT LTZ 25mm are sensors diameter.. but you also get saw for making those holes
@@dzoni97a 22mm
22mm
Looks like the readout is metric. Can it be changed to feet?
Learn metric, man, feet is backward.
hey are these still kicking? I just ordered me a set and just am wondering about the test of time
Was just in that van the other day and used it to park on the street. Works good so far. Hasent seen snow or salt yet so we will see how it does this winter.
+DNALI I hope they are worth the $15 I paid for the red ones to match my car
+DNALI Any updates brah? Some local installers are charging upwards of $400 or $299 at a 'discount' to install one of these kits. Fuck that!
+supercooled still going strong. Was just driving that van last week
+DNALI What happens if you have back hook for boat, can it still work??or if someone hits one of my senzors??or two of them??
Does it still work?! Or did it burn up in 1year?
so I really am interested in this, but I am not too keen on the LED display. It will clash with my interior. Can I mount the display maybe on the rear deck and still be able to hear the audible alerts??
my 2003 rav 4 came with it but it got damaged. it's located at the left and right gray bumper. i bought one but I don't know where to put the four. do you think I can just install 2?
Samuel Chandool ww
yeah man!
This is pretty good, man.
how do you set this up for the front bumper ?
Question; what if I want to install this but only wanna use 2 sensors? Will the system work with only 2 hooked up sensors?
Sham SJ - Yes it can work with 2 sensors only.
So I connect the red wire with the reverse wire but what about the black wire? I just leave it be or I need to connect it to anything?
Rodolfo Abreu ground to any metal part of the car
🤦🏻♂️
You sound like Chrisfix when you talk outside 😂
Very nice. But where do you connect the power?
Power comes from the line that feeds the reverse light. Once you put the car in reverse, the sensor unit powers up.
🤦🏻♂️
If I want to put this in a head unit, how should I do it?
Can this sensor installable to motorcycle?
Nice Video Sir. I have this exact same system, how to put this to the front?
I need u to install mines on my Honda Odyssey.. great job
What colour of 'positive' wire reverse lamp?
Has anyone hooked it up to a display ? I wanna do the same and just have sensors on my back camera regardless. But I wanted to know if anyone had tied to turn that sound down and or change the board it’s self to change the sound