For a 2017 Hyundai Elantra SE, the passenger side motor mount torque specs are as follows: - Upper mount: 40 ft-lbs (54 Nm) - Lower mount: 40 ft-lbs (54 Nm) - Bracket bolt: 20 ft-lbs (27 Nm) Please note that these specifications are based on the repair manual for the 2017 Hyundai Elantra and may be subject to change. It's always a good idea to consult with a professional mechanic or the dealership for confirmation. Additionally, it's important to ensure that the motor mount is properly aligned and seated before tightening the bolts to prevent any damage or uneven wear. If you have any further questions or concerns, feel free to ask!
thanks alot for this i have same mount on my i30 2018 PD G4NC engine and i was charged over 800 for the other 2 mounts and i was told this is easy but i wasn't sure if i could but now I have ordered the mount and feel confident to replace thanks to your video many hyundai same mount
I would like to know when you use the Jack did you do it with the motor or was it just as if I was changing a tire where I don’t have to even jack it up from the actual motor I just wanna make sure there’s a correct way I’m doing this
You literally just put the jack under the motor and give it a quarter inch lift to hold it up and in place as you unscrew the bolts. Adjust the jack as necessary. It's just there to hold the motor in place
For a 2017 Hyundai Elantra SE, the passenger side motor mount torque specs are as follows: - Upper mount: 40 ft-lbs (54 Nm) - Lower mount: 40 ft-lbs (54 Nm) - Bracket bolt: 20 ft-lbs (27 Nm) Please note that these specifications are based on the repair manual for the 2017 Hyundai Elantra and may be subject to change. It's always a good idea to consult with a professional mechanic or the dealership for confirmation. Additionally, it's important to ensure that the motor mount is properly aligned and seated before tightening the bolts to prevent any damage or uneven wear. If you have any further questions or concerns, feel free to ask!
I just changed mine out in my drive way using a scissor jack to hold the motor in place and trust me when I tell you if you were hearing a loud bang over bumps or any shaking in the motor in transmission, replacing this mount will absolutely fix it. Before fixing this my engine was shaking occasionally upon hard acceleration and also had a big slamming noise over certain bumps but only on the right side.. l Changed struts, control arms and links. EVERYTHING... still drove off with a clunk. Changed this one mount and car feels and sounds brand new. No more slamming noises and transmission and engine feels stronger
@@wleedalqfari5342 I’ve seen 2- one on top and one on the bottom. Then there is a third one but I think that is more for the transmission. Theres another video on youtube where a young man changes all 3 motor mounts for his mom’s car
For a 2017 Hyundai Elantra SE, the passenger side motor mount torque specs are as follows:
- Upper mount: 40 ft-lbs (54 Nm)
- Lower mount: 40 ft-lbs (54 Nm)
- Bracket bolt: 20 ft-lbs (27 Nm)
Please note that these specifications are based on the repair manual for the 2017 Hyundai Elantra and may be subject to change. It's always a good idea to consult with a professional mechanic or the dealership for confirmation.
Additionally, it's important to ensure that the motor mount is properly aligned and seated before tightening the bolts to prevent any damage or uneven wear. If you have any further questions or concerns, feel free to ask!
thanks alot for this i have same mount on my i30 2018 PD G4NC engine and i was charged over 800 for the other 2 mounts and i was told this is easy but i wasn't sure if i could but now I have ordered the mount and feel confident to replace thanks to your video many hyundai same mount
You are welcome
Thank u! For making video! My hubby is about to change mines out and this was helpful!
You are so welcome!
Thank you for sharing us the way to change the cars motor mount sir. 💙
Thank you for the great video 🙌
My pleasure!
Good job sir,, thanks for sharing this video
Your so hardworking sir,very nice , great job sir, keep safe always Godbless
Thanks
Good job Keep it up.Thank you for sharing 🥰
You are welcome
you are amazing!! waiting for my part to come in 🥰
Thank you
Oh it's nice ,you're doing great sir ,thankyou for sharing 😊
Thanks for sharing your knowledge sir very great job🥰
Thanks for sharing great job you know how tk do you thing Mr Talented
Thanks a lot, you really help me!
Your doing a great job sir😊keep it up😊
Hey thanks for the video… do you need to remove the splash guard to Jack up the engine?
Yes and make sure put a peace of board on the jack so it doesn't damage the oil pan
Thankyou for sharing po..Keep it up sir
Keep it up a good work sir
Good job 👍👍
Thanks for this sir. God bless
I would like to know when you use the Jack did you do it with the motor or was it just as if I was changing a tire where I don’t have to even jack it up from the actual motor I just wanna make sure there’s a correct way I’m doing this
Place the jack under the engine put a flat peace of bord on the jack that rest under the engine If it's not a solid oil pan
You literally just put the jack under the motor and give it a quarter inch lift to hold it up and in place as you unscrew the bolts. Adjust the jack as necessary. It's just there to hold the motor in place
Is it necessary to change all three mounts or just one mount would do?
It necessary to do so if you can afford to do all at once but if thats the only one giving trouble just replace it
How much do you raise the engine with the jack? Just a little bit to take the pressure off the mount?
Not much soon as the engine rise up you stop
Very impressive sir
Great job 😍🥰
I would like you explain how to replace transmission mount to 2021 Hyundai Elantra. Thanks.
Whenever I come across one thanks for stopping by
I appreciate the video.
Thanks for the video
No problem!
You're really great Sir ☺️
Disregard I heard you say Jack under motor got it 🎉
I have torque wrench, I ll replace with my wrench but I wonder toque specs, if you share I ll be appreciate about it
For a 2017 Hyundai Elantra SE, the passenger side motor mount torque specs are as follows:
- Upper mount: 40 ft-lbs (54 Nm)
- Lower mount: 40 ft-lbs (54 Nm)
- Bracket bolt: 20 ft-lbs (27 Nm)
Please note that these specifications are based on the repair manual for the 2017 Hyundai Elantra and may be subject to change. It's always a good idea to consult with a professional mechanic or the dealership for confirmation.
Additionally, it's important to ensure that the motor mount is properly aligned and seated before tightening the bolts to prevent any damage or uneven wear. If you have any further questions or concerns, feel free to ask!
@@MrtalentedReidin your video, you are replacing upper one right?
do you have a shop in south fl area
No am in savannah ga
hi sir where did you put the jack in the engine
Under the motor if you have a peace of rubber or board you can put it on the jack
5 star
Thanks for sharing
You are welcome
Is that the only one that should be replaced? I have heard that this car has 3 supports, but I clearly hear that is the one making noise.
To make sure it best to check all damages
I just changed mine out in my drive way using a scissor jack to hold the motor in place and trust me when I tell you if you were hearing a loud bang over bumps or any shaking in the motor in transmission, replacing this mount will absolutely fix it. Before fixing this my engine was shaking occasionally upon hard acceleration and also had a big slamming noise over certain bumps but only on the right side.. l Changed struts, control arms and links. EVERYTHING... still drove off with a clunk. Changed this one mount and car feels and sounds brand new. No more slamming noises and transmission and engine feels stronger
@criggsfirearmchannel wonderful
How many mount is there in the elentra ?
@@wleedalqfari5342 I’ve seen 2- one on top and one on the bottom. Then there is a third one but I think that is more for the transmission. Theres another video on youtube where a young man changes all 3 motor mounts for his mom’s car
@@hahaiwon Thank you , I have already changed one on top .
@@wleedalqfari5342how’d it go? I’m doing mine in a couple days. Looks easy enough but nothing’s ever that easy😅
What year is this for?
Work from 2017 to 2019
Do know how many mount Elantra have ?
Most comes with 3 mount rear lower and 2 upper driver and passenger while some has 4 1 lower at the front
He is correct.. also worth noting is that the mount that causes the most issues is the mount you see in the video. The top mount
Без домкрата невозможно поменять?
Will be difficult maybe
price motor mount @
amzn.to/4aNmJI6
amzn.to/48ruCBp
@@MrtalentedReid Bro where is your shop ?