I used the basic oracle 651 vinyl with cricut to cut my image and used it for my sign I made for my husband~ Turned out BEAUTIFUL~ This paste lasts a LOOOOOOONG time~ A tiny bit goes a long long loooooooooong way~ lol a good note to those, this needs to be COMPLETELY dry~ I went 2 minutes, but some spots don't dry fully, so I gave it an additional 3-5 minutes in total before removing the vinyl and then burning~
Hey!! Thrilled you have had great success with Torch Paste!!! Thanks for the tip - letting it dry a little longer makes a big difference :). A little Torch Paste goes a long way, for sure!
I love this paste!! Such a great product. I made the stencil using oramask 813 but it was difficult to get the stencil to stick to my chopping board. I don’t why that happened but in the end it turned out beautiful 😍. Thank you so much.
Nooooo it can only be specially designed for cricuit stencils. Absolutely no, no, no, no, no. Also, you can only use this on blue cricit stencils. Your welcome
Hi Catherine! Very fine details can be burned into the surfaces, depending on the mesh in the stencil or the fine detail from vinyl. Hope this helps! 🔥
There are a few areas of my design that looks like it did not burn. The torch paste bubbles as it burns and has left a few un burned area. Can I apply a little more torch paste to these areas to help this issue? Has this happened to anyone before?
I have used the torch paste on 4 projects. It worked beautifully as far as burning the wood goes, but it left a sooty residue where it burned. You couldn't touch the blackened wood at all, it smeared every single time. I seen a tutorial that instructed you to clean the burned wood with vinegars, well that was a disaster. Really disappointed with the paste
I used the basic oracle 651 vinyl with cricut to cut my image and used it for my sign I made for my husband~ Turned out BEAUTIFUL~ This paste lasts a LOOOOOOONG time~ A tiny bit goes a long long loooooooooong way~ lol a good note to those, this needs to be COMPLETELY dry~ I went 2 minutes, but some spots don't dry fully, so I gave it an additional 3-5 minutes in total before removing the vinyl and then burning~
Hey!! Thrilled you have had great success with Torch Paste!!! Thanks for the tip - letting it dry a little longer makes a big difference :). A little Torch Paste goes a long way, for sure!
@@torchpaste How long is this paste good for?
I made a stencil with my Cricut. I used the Cricut stencil vinyl and it worked really good. I love Torch Paste.
I love this paste!! Such a great product. I made the stencil using oramask 813 but it was difficult to get the stencil to stick to my chopping board. I don’t why that happened but in the end it turned out beautiful 😍. Thank you so much.
Just received the torch paste. Excited! Could you please update "Used in this video"? Thanks for your instructing!
Thanks for this video. What causes the areas where torch paste has been used to look cloudy after it is burned?
Can you use torch paste on a store bought bamboo cutting board?
I was so excited to try this torch paste… why aren’t you guys able to ship to California? 😕
Hi! Gremlins on the website - but now it’s working!
I see it wasn’t chalk paint but can you chalk paint before the logo is added to burn? Newbie here
any tips on preventing cutting board from splitting from getting wood hot?
Can you do the paste and burning over stained wood?
Can a Cricut Easy Press be used instead of a heat gun.
Can you do this on leather?
Did you chalk paint before you added the logo?
Is that painted wood? And what type of wood did you use?
Is the burnt paste save for foodcontact?
How long did you let it dry before you used the heat gun?
Hi Carla! Allow 2-3 minutes when using mesh stencils. Allow longer dry time if using Vinyl - helps with the weeding process 🔥
Hello, can I use a torch gun instead of the heat gun?
Hi! Is this safe to use as a cutting board?
Hi! Torch Paste can be used to burn 🔥 on cutting boards. The surface must be sealed before use and treated regularly. Thanks for watching!
Can u use any stencils
Nooooo it can only be specially designed for cricuit stencils. Absolutely no, no, no, no, no. Also, you can only use this on blue cricit stencils. Your welcome
Can I stain over the top of Torch Paste?
Following! I have the same question.
Hi there! Yes, you can absolutely stain over Torch Paste burned surfaces- looks gorgeous!
What can you use to seal it on a cutting board that would be food safe ?
Why remove vinyl, won't the heat gun remove it? Seems to waste time. Maybe I missed something.
Do you ship to California?
Hi! Yes, we sure do! Ships in US and 16 other countries 🔥😁
How detail of a image can you do? I've asked this question on other RUclips shows that are doing the same wood burning project.
Hi Catherine! Very fine details can be burned into the surfaces, depending on the mesh in the stencil or the fine detail from vinyl. Hope this helps! 🔥
I stop by
There are a few areas of my design that looks like it did not burn. The torch paste bubbles as it burns and has left a few un burned area. Can I apply a little more torch paste to these areas to help this issue? Has this happened to anyone before?
Where do u get oracle 651 vinyl at...
Amazon
Great video thank you for sharing. But once you turned on the heat gun and was talking was hard to hear you
I have used the torch paste on 4 projects. It worked beautifully as far as burning the wood goes, but it left a sooty residue where it burned. You couldn't touch the blackened wood at all, it smeared every single time. I seen a tutorial that instructed you to clean the burned wood with vinegars, well that was a disaster. Really disappointed with the paste
Can you use any cricut vinyl with torch paste or does it have to be 813?