Very nice work and video. I have an old Bilek kit which is also Dragon Su-24. I was about to buy the new one from Trumpeter but you inspired me and I will maybe build the old Dragon kit too. Best Daniel
Is there any mode kit that can do a complete Fencer wing articulation? Those self adjusting pylon maybe difficult to implement. It would be amazing if it exists.
@@CloneCommanderRose i don't see any american Fulcrums, flankers, frogfoots or blackjacks hmm... maybe they don't copy America after all. It's the same as saying every plane is copied from the kittyhawk, just because it has wings!
Можно ли попробовать сделать изменяемую стреловидрость крыла,потомучто ета скованность мешает глазу,хочется чтоб была возможность выставлять разные углы на уже собраной модели
Thanks for this good video. Will buy this model very soon, but I always like to watch out for other people buildings so I can be aware of any kind of issues. Back in the 80s when I started using airbrush, Badger was the available in my country at the time. Sometime foward, I bought a FAR-EAST pack from a new company selling online named Luckymodels. Pack had a mini-Air Compressor and a Airbrush DH-103 from a Sparmax brand. Since then, I have only used Sparmax Airbrushes and Compressors. Absolute joy to work with, easy all around. So glad I found another modeller using this great brand. Cheers!
All original from the kit itself All the best! Thanks!
6 лет назад+1
please do a mig-23mld build - there are competitors and some of them are east europe origin, I don't know which to buy and I have limited budget. sincere admiration from Istanbul
yes!!! i'm looking for pictures to confirm this... the MR version is unarmed except by R-60 missiles... the instructions of Trumpeter conducts to error... good observation... hello from Brazil
Hi...very nice work as usual!! At about the 15:11 mark you mix two Gunze colors and spray on the model. Just wondering, is this to highlight the panel lines? What is the purpose of this technique and the post shading technique later in the vid? Wanting to improve my jets and am interested in your techniques. Thanks! DREW
Nice job! Question: That liquid "Mr. Cement" in the bottle that you're using...is there any particular reason why you use that over any other brand? Is it better that the other cements?
Looks to me like a lot of sanding to do. And filling on the injector pin marks. Beauty is only skin deep, the truth of the kit is it has fit issues and markings issues - am I right?
No, the kit was a pleasure to build! You should try to build a Dragon kit... there you can find sanding and filling, not to mention that it's a 1cm!! Short. All the best! Dusan.
@@ScaleModelAircraft Great news then I heard wrong. Your kit BTW looks 👍 great. I do have some DML kits and whew you said it, they are tough. The He 219 and the Are 234 not yet started. But the long span TA 154 is a bear. Keep posting as I really enjoy your work and the way you present it!
Thank you!! 🍺 DML Su-24... ah... nightmare, not to mention mine He-219 in 72nd ("new" 2005 edition)... whole panel lines on fuselage aren't in line/missed by 3mm! So I had to rescribe all panel lines. All the best! Dusan. Btw: Ar-234 isn't that bad!
No, it looks mostly ok in that regard, but it looks like a mix between Su-24M bomber and MR recon plane features; nose and cockpit design is MR, intakes and antennas along the spine need checking, MR should have no bomb pylons on the belly whatsoever, just a central equipment pod, drop tank mounts on inboard wing pylons, another recon pod on one outboard pylon and an adapter for two R-60 short range AA missiles on the other. I didn't spot which optics it has on the bottom. But I think this kit can be built into the correct 24MR if you pay attention to reference photos and videos over instructions, even if requires a bit of fitting.
Hello! You use a cyanoacrylate and a liquid cement, and am trying to understand why you switch them. Is the liquid (brush in the cap) used for crack filling? Your work is amazing. I never tried anything that small. I build 1:35 mostly, and am getting a second steam locomotive, BR 86, by Trumpeter. Keep building!
+Jaroslav J. Peterka Thanks! The liquid glue with brush is for capillary action and the Revell contacta (with nedle) is also regural glue not a cyanoacrylate. All the best! Dusan.
Tha is probbably litle oversigth of modeler :D Nevertheless nice model. here: The Su-24MR (Fencer-E) is a dedicated tactical reconnaissance variant. It entered service in 1983. It lacks attack radar, cannon and attack avionics, in favor of panoramic cameras, side-looking airborne radar and infrared reconnaissance system. It also carries other podded sensors. This reconnaissance aircraft can carry two R-60 (AA-8 Aphid) air-to-air missiles for self-defense.
1:19....."Informative instruction"..... Well......aren't they always? Otherwise, what's their use....? :-) But I think I know what you meant ! Nice build, though. I always enjoy your videos.
That's an utterly stunning Fencer. Very well done. excellent paint job especially the tone and shading. Great vid.
great build Dusan! Always a pleasure to watch your work!
Thanks Alex! All the best! Dusan.
An excellent guide for people who will only be engaged in modeling. Very cool.
Great work once again! The attention to detail is extraordinary.
Your sticking down tape when you glued it so you haven't got to hold it you give me good Idea thankyou 😊
Bravo Dušane, legendo!
Nice video and excellent result!
Dude, you're a "monster"! Congratulations on the nines!
Excellent work
Very nice build! Wish I was this good!
WOW...you make it look easy...Fantastic work...I learn a lot from your videos. Thank you!!!!
Super Arbeit und schönes Modell, einfach Genial!
Danke vielen dank! All the best! Dusan.
Mi modelo de avión consentido Su 24 Fencer, felicidades estimado amigo, excelente trabajo y resultado espectacular, digno modelo de concurso.
had to watch this again I just bought this kit in 1/48th looking forward to it love ur vids Dusan kutgw
Beautiful plane Dusan ! Wales UK.
Keep the great work man !
Very nice work and video. I have an old Bilek kit which is also Dragon Su-24. I was about to buy the new one from Trumpeter but you inspired me and I will maybe build the old Dragon kit too. Best Daniel
Great work! And useful video, thank you.
Excellent work!
Very good. I´m waiting the Fencer D version to be released.
Wow😲Long live your hand on assembling I love a plane SU-24Greetings 👏👏👏👏
I want to be like you Greetings
Dušan legenda! :)
Espectacular el acabado y el tutorial. Un saludo amigo desde Madrid. Te sigo por tu canal.
Good stuff 👍
14:20 Can anyone hear the *_Sweet Home Alabama_* vibes?
Nice choice for songs, man.
Fantastic!!!!!
Russian jets are rigid and sexy as hell , nice video too
I agree! All the best! Dusan.
nicely done
Nice one!Thanks!!
That's amazing!
Fantastic model. Very striking in that colour scheme. Please turn the music down.
Great video, great su24 built.
I think this trumpeter kit is good, but the kit from stream is a little better.
Nice work!
Awesome as Usual.
Very nice work!
OH, to see the Trumpeter version of the Storm Shadow. Alas, once more back to Hasegawa.....
fantastic!
+Mitko Nikitov Thanks!All the best! Dusan.
Simply gorgeous !
good paint work
That's the way it's done ! ;)
Fantastic!
superb work
awesome model man :)
Is there any mode kit that can do a complete Fencer wing articulation? Those self adjusting pylon maybe difficult to implement. It would be amazing if it exists.
I can check the 48th scale Fencer, really dont know... All the best! Dusan.
красавец!
Thank You! All the best! Dusan.
Brilliant
So so good!
Russia's answer to the General Dynamics F-111, good review!
looks like Russia can't make there own planes so they copy us
Max Brandt I think Ту 22М3
both have a very different role
@@CloneCommanderRose i don't see any american Fulcrums, flankers, frogfoots or blackjacks hmm... maybe they don't copy America after all.
It's the same as saying every plane is copied from the kittyhawk, just because it has wings!
NICELY DONE :D
Great work!
damn good work,thanks!
Beautiful t👍👍👍
Можно ли попробовать сделать изменяемую стреловидрость крыла,потомучто ета скованность мешает глазу,хочется чтоб была возможность выставлять разные углы на уже собраной модели
Thanks for this good video. Will buy this model very soon, but I always like to watch out for other people buildings so I can be aware of any kind of issues. Back in the 80s when I started using airbrush, Badger was the available in my country at the time. Sometime foward, I bought a FAR-EAST pack from a new company selling online named Luckymodels. Pack had a mini-Air Compressor and a Airbrush DH-103 from a Sparmax brand. Since then, I have only used Sparmax Airbrushes and Compressors. Absolute joy to work with, easy all around. So glad I found another modeller using this great brand. Cheers!
Behind my house there is an airport with Sukhoi Su-24)
Very cool! Thanks! All the best! Dusan.
similar?
Where is your house?))
very nice, amazing what plastic can be
I like your videos I'm 11 now and soon I will make a Chanel like yours)))
Thank you
Bad ass bro! looks fucking awesome!
+sekytwo Sekytwo thanks! All the best! Dusan.
Just a comment for the algorithm
amazing piece!!! Are those rivets all original from trumpeter products or DIY?
All original from the kit itself
All the best! Thanks!
please do a mig-23mld build - there are competitors and some of them are east europe origin, I don't know which to buy and I have limited budget. sincere admiration from Istanbul
Dusan that was great to watch...do you wash the cockpit and wheel bays???
+Quadrant14 Yes, a light wash with dark gray... All the best! Dusan.
+ScaleModelAircraft Thanks mate
awesome work as always kutgw
Beautiful!!! Which thinner do u use for AKAN paints and then to clean the airbrush? I had bad experience with those...
Nice built but the Su-24MR is the unarmed RecceVersion
yes!!! i'm looking for pictures to confirm this... the MR version is unarmed except by R-60 missiles... the instructions of Trumpeter conducts to error... good observation... hello from Brazil
Why does no one build commercial jetliners in this quality? is this a generational thing? thanks for sharing btw!!
+luto2000 Thanks! Btw, I have a lot airliners in my collection. All the best! Dusan.
+ScaleModelAircraft you should do one on video and delight us!! :D
Awesome
beautiful work, clean and precise. what do you use for the gloss / Matt?
Amazing...
Hi, what kind of music do you use at the end of the video?
open.spotify.com/track/7mFoNgvXKUx4TMreEvBGVe
Yes.
Hi...very nice work as usual!! At about the 15:11 mark you mix two Gunze colors and spray on the model. Just wondering, is this to highlight the panel lines? What is the purpose of this technique and the post shading technique later in the vid? Wanting to improve my jets and am interested in your techniques. Thanks! DREW
cool
nice
Душан красавчик....давай учи русский...будешь по русски!! Класс работа!!!!!
The wings in this kit is not mooving?
Noup. All the best! Dusan.
awsome
is the SP 35 for bigger surfaces and the SP 20 for smaller ones?
Wow nice, you are a real artist, where can I order this kit?
Nice job! Question: That liquid "Mr. Cement" in the bottle that you're using...is there any particular reason why you use that over any other brand? Is it better that the other cements?
+Phayzyre105 Excellent cement. I also use Revell, Deluxe materials and Tamiya Extra thin. But for now this i my favorite. All the best! Dusan.
ScaleModelAircraft Thanks!
I am wondering why you are using glue for the seams? So you don't have to sand them later? , I'm just curious !
No no, just to check the seams. I have obsession to do that :-D All the best! Dusan.
You added NO weight in the nose, is the model nose heavy ?
You can add approximately 15grams. All the best!! Dusan
great👍🏻..I would like to build like U...but I have two left hands😂
Looks to me like a lot of sanding to do. And filling on the injector pin marks. Beauty is only skin deep, the truth of the kit is it has fit issues and markings issues - am I right?
No, the kit was a pleasure to build! You should try to build a Dragon kit... there you can find sanding and filling, not to mention that it's a 1cm!! Short. All the best! Dusan.
@@ScaleModelAircraft Great news then I heard wrong. Your kit BTW looks 👍 great. I do have some DML kits and whew you said it, they are tough. The He 219 and the Are 234 not yet started. But the long span TA 154 is a bear. Keep posting as I really enjoy your work and the way you present it!
Thank you!! 🍺 DML Su-24... ah... nightmare, not to mention mine He-219 in 72nd ("new" 2005 edition)... whole panel lines on fuselage aren't in line/missed by 3mm! So I had to rescribe all panel lines. All the best! Dusan. Btw: Ar-234 isn't that bad!
@@ScaleModelAircraft cheers 🍻 then mate!
No, it looks mostly ok in that regard, but it looks like a mix between Su-24M bomber and MR recon plane features; nose and cockpit design is MR, intakes and antennas along the spine need checking, MR should have no bomb pylons on the belly whatsoever, just a central equipment pod, drop tank mounts on inboard wing pylons, another recon pod on one outboard pylon and an adapter for two R-60 short range AA missiles on the other. I didn't spot which optics it has on the bottom. But I think this kit can be built into the correct 24MR if you pay attention to reference photos and videos over instructions, even if requires a bit of fitting.
Great work Dusan,congratulations!I will build the M version soon...Was there any hard fitting problems with the kit,especially the intakes area?
As I recall, I had no fit issue in that area. Thanks!!! All the best! Dusan.
amazing build! what product do you use for your decals? it seemed very high quality and I'm looking for something like it
Thanks! I am using few items the Revell Decal soft, GSI Gunze Mr. Setter (Blue) and Mr Softner (Green bottle) excellent stuff. All the best! Dusan.
what varnish brands do you use. ive tried so many .. its hard to get a good matt finish after a gloss coat. whats the ratio
+OVER THE TOP Hello, in this video build, used varnish was a Vallejo satin varnish. Excellent stuff! All the best! Dusan.
+ScaleModelAircraft Straight o-o-bottle! ;-)
Is there supposed to be a slight seam or crack at wing roots
Yes. All the best! Dusan.
кто знает , подойдет ли головная часть от вэс-стрим к трумпетеру ?
how many parts in this kit ?
Открыл коробку су-24мр, а сделал су-24 м с бомбами. У МР 2 ракеты Р-60
...и то только по особым случаям)
What's that wheel stencil called? I need to get myself one.
Hasegawa template 1. All the best! Dusan.
Hello! You use a cyanoacrylate and a liquid cement, and am trying to understand why you switch them. Is the liquid (brush in the cap) used for crack filling? Your work is amazing. I never tried anything that small. I build 1:35 mostly, and am getting a second steam locomotive, BR 86, by Trumpeter. Keep building!
+Jaroslav J. Peterka Thanks! The liquid glue with brush is for capillary action and the Revell contacta (with nedle) is also regural glue not a cyanoacrylate. All the best! Dusan.
And God created man
он ошибся(он на верхнюю часть фюзеляжа поставил деталь ор СУ-24 МР ,хотя собирает бомбардировщик((
What about nose weight?
15g! Approximately... all the best! D.
"MR" with bombs?
Tha is probbably litle oversigth of modeler :D
Nevertheless nice model.
here: The Su-24MR (Fencer-E) is a dedicated tactical reconnaissance variant. It entered service in 1983. It lacks attack radar, cannon and attack avionics, in favor of panoramic cameras, side-looking airborne radar and infrared reconnaissance system. It also carries other podded sensors. This reconnaissance aircraft can carry two R-60 (AA-8 Aphid) air-to-air missiles for self-defense.
👍
1:19....."Informative instruction"..... Well......aren't they always? Otherwise, what's their use....? :-) But I think I know what you meant ! Nice build, though. I always enjoy your videos.