@ParkerTheBasshead I just subscribed due to the balls and honesty . Don't forget I will give you an amp , sub or some cash because this was the best video in my opinion that you've EVER posted !!! We are loving it more than you know. I will see you at Ruckus . Im a man of my word so for being super honest and a good sport I'm personally gonna get you something of value...😎👍👍👍
I think you abused the hell out of that meter for years..Bass might have affected the calibration of that unit..The only way to check really is to get another unit and see if you get the same values..
Who cares smds shits overrated over priced I used a aukuyee oscope to set my gains I think I paid $50 for it sounds badass u can get clamps for voltage at lowes lol
Man fuck Steve I see true fans of his asking questions and complementing his shit he ignores them and takes time to argue n try to belittle any negative comments.
Absolutely 💯..... no point in it whatsoever. These guys are destroying amps and subs like there paper weights... You think folks would listen to someone that works on them DAILY. I love the ones they wire up backwards then look for a warranty...😂😂😂 like you can't tell... good grief !!
Oh buddy,,, he just went after Steve Jonathan Big d Tony pocketbook this is not going to be good he probably should have went about it in a different way
@@FrankStPeterSteve already made millions selling this junk so he'll be alright. And he's still selling his little overpriced speaker terminals. He'll survive
@@fusion82 well I don't know how well you know Steve but if you say anything to discredit him or to him that he don't like the s*** is coming down the pipe believe me lawyers and all,
@@FrankStPeter I know he gets his feelings hurt easily. Freedom of speech under the constitution. I can argue the things he says and does offends me too
The guys that keep posting 10,000w readings from amm1 with Taramaps big boss 3k need to see this Dont get me wrong the Taramps put out power but lets be real. To get 10k true power your pulling near 1000amps, thats never gonna happen with 1-2 AGM batteries and single runs of 1/0 power/ground.
I don’t know might be a faulty unit, i’ve seen these calibrated side by side with oscilloscope and clip indicators from the amps and they all matched up…Don’t know exactly where i saw that but i’ve seen it.. Why would they ever try and sell you a bad product? That doesn’t make any sense and to be honest even here in Europe some reputable businesses use these meters because they do the job like they supposed to do..So i think you might want to let them calibrate that sucker and all will be well.. The reason that meter strays from it’s original calibration could be the fact that it took years of abuse and bass…If bass shakes your car, amps and buildings apart you might conclude it does the same things to those meters…
2:40 best way to actually test the output of an amplifier. Couple meters (have to be true RMS) and a good 400.00 clamp meter (with instant rush button) will give you accurate output power.
I just use a good old fashioned oscope, clamp meter and ohms law. I don't get why people wanna dyno anyways. Its really a waste of time and hell on an amp
One of my favorites , next to your channel of course. Lmfao. Are those fried rice subs available anywhere or do you have a site My bad if I’ve missed the links
Best video ever this video just made my day as well lmao! I always just clamp my amps and see what my current draw is and thats how i know how many watts..
@deasnutz9965 yes I agree!! His best video! I know I can't get a exact number, but what I do is clamp my amplifier while playing music and I end up with 280-300 amps of current draw..So I just round of around 100 amps for every 1000 watts give or take..I always tell people that stupid SMD is a waiste of money..Same with the bench tests in alot of ways, subwoofers have rise ect not a set load..idk that's how I've always felt about it
@weeduck9579 a very cheap one soundstreme txp12000.1..It might be 50 amps per 1000 watts I've always been told general rule of thumb is 100 amps of current per every 1000 watts, I may have been told wrong.
Steve and d'amore have been grifters from the jump. Anybody who trys to make a product seem like magic, just walk away. I've been a field engineer for about a decade and electronics and electrical doesn't magically change when its applied to car audio. If you just gotta know what your power is just buy the correct tools for the job, otherwise just install you stuff correctly and enjoy.
Well I ordered one so we'll see 🤷♂️ I bought it over a month ago. If I would have seen this before, I probably would have just waited for the LF Audio one.
I bought the Bassheadgarage watt meter and should be delivered soon but I'd rather be under rated than over rated. But this will be interesting when other meters hit the market. I'm going for the underdog.😎
I think this is a difference between how they are measuring the power. Clipping means the waveform is more and more square the further into clipping you go. The amp output spends more time at the peak of the wave, peak voltage when playing square wave, and ends up measuring more power because of it? It's interesting that the Basshead Garage one measures less power. Not sure what's going on
I would trust the direct wire connected meter over a wire thru hole designed meter. Im more interested in finding something to tell me voice coil temps than power. Yes i over power my subs😉
@@deasnutz9965 yessir I have clamped with both and has seem very accurate I have another meter that should get here within next 2 weeks. I'll send it to you brand new not opened if you wanna test the amps you have no strings attached.
Its terrible.. you can buy a piece of poonanner cheaper than a jug of milk. I mean ...at the strip club a dollar will let you see a boob.. a dollar in the store will get a pack of big red chewing gum. 😂😂
Effectively, the way electricity works, neither are a "perfect" way of reading it, but if the question is "which one is closer", that answer would be the one that has a ground loop in it.
All of them are guessing tools. Best thing it does is reads impedance. But you would be better off to run an oscope and clamp meter and do ohms law. You'll get a perfect number. That's clean and USABLE power. Not dirty
@@deasnutz9965 The problem with that statement is that you can alter the reading of your output by simply changing frequency. Until an agreed upon frequency (and a viable, consistent test source) are provided, there's an almost infinite number of variables, and thereby outcomes. Even what's commonly referred to as "the standard" now (40hz for subs) is wrong, as it's not even a practical and absolute key in music. 36hz, for example, is much closer, yet everyone goes with 40hz, probably due in large part to SMD pedaling it. Furthermore, suggesting using ohms law off of a number you get from a clamp meter might be "good enough", but it still isn't 100% accurate, as anything from what brand of clamp to the type of shielding the wire has on it (and even the location of the clamp placement) makes for variance in those readings. Without bare wire touching both a probe and a ground, you'll never truly get 100% accuracy (which is why the SMD unit is such a stain on the concept). It's like they don't even know what a Fluke (tool) _is_ used for. SMD? More like SMH.
Yep , i went to that website to try in order one those meters that was up against smd. There sold out wonder why. An also look up a good oscope on flea bay , an scamazon.$400 .that was the Olympic reason i was searching in first place . Gold !
This is the video I was commenting on yesterday I got my shipping notification for the BHG wattage meter this morning but I am extremely concerned about which is correct if either and why are they so far apart that could cause someone to damage their equipment
@@deasnutz9965 can you please recommend a really good one for say around 100$ unfortunately with the blown amps and LF Audio volt meter needing to be repaired I'm kinda tapped right now
The Chinese meter reading should NOT be unstable like that while reading a sine wave output. Ohms Law: I×E and an oscilloscope to read clipping, will tell who's lying about the numbers.
Did you see the series of videos that Sean from EMF did. So funny. Steve made an turd of himself in the comments on those vids and eventually deleted most of them.
@@deasnutz9965 he basically used one of Smeads dumb tools (the gain setting one) incorrectly on purpose and made a video doing it. Someone told Smead and he got all of his cronies to talk smack in the comments. I was asking him to explain what Sean was doing wrong and he could not/would not. Leaning toward could not.
And I know for a fact that if you use the DD-1 to tune your gain with a flat signal from the head unit and then adjust the settings afterwards the settings you adjust send you straight into clipping it's bullshit and a waste of money i could have spent the 400$ i spent on the DD-1 and CC-1 combo package on better upgrades hell it barely registered the 40hz track and doesn't register distortion whatsoever from my head unit???? What head unit do you know that is stock from the factory that is distortion free NONE that I know of definitely a garbage product and a waste of money in my opinion I still had to set my gains with the multi meter
@@deasnutz9965 what is a graphical I've never heard of it before but if it will help me learn better and get a more accurate reading for learning purposes I'm all for it
I wonder how long it will take Steve Meade to comment on his video that the smd shows higher because it reacts faster to the input signal. That seems to be his thing when his products fall short.
He will not cause he knows it's the same thing shit there both from China but ones cheaper I bought one of his tools and I sent it back got a full refund and explained how a cheap oscilloscope will be and do better than his piece of garbage he's just picking everyone pockets for his expensive lifestyle I hope people quit buy his name that's all it is.
My point is ... what is the point ? Get it ! Ohms law , an oscope and a clamp meter is the ONLY accurate way. Its pretty much a guessing game. None of these meters would qualify in the industry I work in. We have 18000.00 meters that are CALIBRATED annually per the FCC .... So , I know what I'm taking about. Only 36 years of real experience
@@deasnutz9965 with you 100%. I meant to put idk in my comment. But yessir ohms law is pretty concrete. I guess I'm waiting on the video where somebody actually shows how Accurate or inaccurate each one really is with the formula
rich on gimmicks like most if your old school volt meters clamp meters and oscope for set that kit was crazy expensive and everyone was on them I stayed old school
An update for anyone wondering apparently the BHG wattage meter only has a 100-200 amp sensor depending on what model you have meaning correct me if im wrong that it can't read anything more than a 2k setup MAX so I as well as everyone else who ordered this literally can't even use it for our system im not even going to open mine it will be for sale to someone with a smaller setup that can use it properly
@@elmadridista125 the website right now says it is good for 20k but it only has a 150 amp sensor 20k is roughly 2000 amps of current if I recall it is 100 amps of current for every 1000 watts rms so how are you going to read 20k correctly with a 150 amp sensor
@@2000Rpz no it says 20k you are correct but what you are not understanding is it only has a 150 amp sensor unless I have been told wrong it's 100 amps of current for every 1000 watts rms so how are you going to get a proper reading on 20k with a 150 amp sensor
Listen you got Jonathan you got Steve Tony Big d and a handful of others you just hurt their pockets they're coming with lawyers Believe that they're going to stop him
@@deasnutz9965 so when he first started I watched him a lot but then it was obvious he was selling out to the audio companies so I blocked that s*** and I still don't watch it,, but this,, I just want to see if Steve's going to come after him like he does everybody else cuz I've watched Steve for years as an installer He's got some good ideas,, oddly enough watching Steve is what brought me and Patrick together,, I don't have enough money to go to get somebody like Steve but if I build it myself it's different I level this playing field
@deasnutz9965 i know right? No proof which one is off. Mine works fine i know because ive tested it. I think SMD has alot of haters because of his success and thats sad. Men acting like women. Could be a defective meter.
Glad you liked it! I just like to show things how they are and let the viewers decide what they think about it
@ParkerTheBasshead I just subscribed due to the balls and honesty . Don't forget I will give you an amp , sub or some cash because this was the best video in my opinion that you've EVER posted !!! We are loving it more than you know. I will see you at Ruckus . Im a man of my word so for being super honest and a good sport I'm personally gonna get you something of value...😎👍👍👍
Weeeeeeneeeeee
Smd stuffs over rated anyway lol
I think you abused the hell out of that meter for years..Bass might have affected the calibration of that unit..The only way to check really is to get another unit and see if you get the same values..
Agh... ITS ABOUT TIME.. I BEEN SAYING THIS.. and nobody had the balls..it's so much more satisfying knowing Steve is a jerk
I seen that video earlier, and my first thought was……” Steve is gonna throw a shit fit “😂
😂😂😂 I hope so
Who cares smds shits overrated over priced I used a aukuyee oscope to set my gains I think I paid $50 for it sounds badass u can get clamps for voltage at lowes lol
Man fuck Steve I see true fans of his asking questions and complementing his shit he ignores them and takes time to argue n try to belittle any negative comments.
And this is why my terms and conditions state "We DO NOT dyno amps here". Why?? It's pointless. They are only good to push an amp over the edge.
Absolutely 💯..... no point in it whatsoever. These guys are destroying amps and subs like there paper weights... You think folks would listen to someone that works on them DAILY. I love the ones they wire up backwards then look for a warranty...😂😂😂 like you can't tell... good grief !!
Oh buddy,,, he just went after Steve Jonathan Big d Tony pocketbook this is not going to be good he probably should have went about it in a different way
@@FrankStPeterSteve already made millions selling this junk so he'll be alright. And he's still selling his little overpriced speaker terminals. He'll survive
@@fusion82 well I don't know how well you know Steve but if you say anything to discredit him or to him that he don't like the s*** is coming down the pipe believe me lawyers and all,
@@FrankStPeter I know he gets his feelings hurt easily. Freedom of speech under the constitution. I can argue the things he says and does offends me too
He proved the SMD AMM1 is not accurate. It inflates the amp numbers to make people spend their money on all these amps
If you push it into clipping it exaggerates numbers big time.
@@deasnutz9965 honest question here: Asumming the peak voltages are the same; Doesnt a clipped signal have more power than an clean sine wave?
The guys that keep posting 10,000w readings from amm1 with Taramaps big boss 3k need to see this
Dont get me wrong the Taramps put out power but lets be real.
To get 10k true power your pulling near 1000amps, thats never gonna happen with 1-2 AGM batteries and single runs of 1/0 power/ground.
It’s stupid to assume such things..What probably happened is that meter took years of abuse and bass and the calibration got knocked off..
@@Jsims111 lol dont act smart here, all my comments got deleted for asking similar questions. this deas nuts guy is a moron.
Yeah, he's not gonna be invited to the Christmas party this year 😂
😂😂😂😂😂 they gonna be bashing the hell outta him. I guarantee it.
Not a fan of smd, get’em Parker.
I 2nd this motion
Steve is a punk 3rd this
Steve is a stuck up prick
It's unanimous.
@@Emperor_1971 I agree. steve is a punk
I saw this video and said wtf , I'm glad I never bought that junk !!!
😂😂😂😂
I don’t know might be a faulty unit, i’ve seen these calibrated side by side with oscilloscope and clip indicators from the amps and they all matched up…Don’t know exactly where i saw that but i’ve seen it..
Why would they ever try and sell you a bad product? That doesn’t make any sense and to be honest even here in Europe some reputable businesses use these meters because they do the job like they supposed to do..So i think you might want to let them calibrate that sucker and all will be well..
The reason that meter strays from it’s original calibration could be the fact that it took years of abuse and bass…If bass shakes your car, amps and buildings apart you might conclude it does the same things to those meters…
I made another video explaining . I made it last night.
"Reputable" companies sell 🐂💩 all the time what makes you think a RUclipsr wouldn't 😂
@@deez26788 Yeah Meade isn’t just another RUclipsr…I think the guy deserves everything he worked for..
Purchased a dd1 years ago, first car I tuned using it came out worse then by my ear. Sold it, will never use digital tools again.
Holy shit !! I love this comment...😂
My daddy once told me as a little child
You can have 3 POS
1 for free
1 for $1
1 for million dollars aka SMD
There's a sucker for each POS !!!
Awesome analogy .. your dad has more sense than most ...😁
It was funny watching Parker with that $80 meter
I swear it was😂
2:40 best way to actually test the output of an amplifier. Couple meters (have to be true RMS) and a good 400.00 clamp meter (with instant rush button) will give you accurate output power.
I just use a good old fashioned oscope, clamp meter and ohms law. I don't get why people wanna dyno anyways. Its really a waste of time and hell on an amp
Not cool if the SMD meter is off. That means it's a waste of money if its expensive and not accurate 😂
Everyone riding around with amps making 1/2 power from what they thought. Also no wonder everyone's shit burns up when using that tool 😂
@@deasnutz9965 yeah sounds like a rip off to by a SMD meter 😆
Only a fool would waste their money on that overpriced smd junk
The DD-1 shows clipping before the amp does. Maybe the other meter is off. Idk
YES!!! LOL love it. Go Parker! He had no clue what he's done bless that man. 😍
My hero
One of my favorites , next to your channel of course. Lmfao. Are those fried rice subs available anywhere or do you have a site My bad if I’ve missed the links
They are in Loris SC . I also have some stocked up. Duck sells them at main st window tinting in Loris SC only.
@@deasnutz9965what’s wattage rating and how much is a fried rice 15? and what’s a well known sub that would be comparable to it?
Like I said on Parkers channel, I never drank the SMD Kool Aid 🎉😂
I didn't take the red pill either
what do you think of the audio control epicenter?
Best video ever this video just made my day as well lmao! I always just clamp my amps and see what my current draw is and thats how i know how many watts..
Glad you enjoyed!.. I loved it... Parker was serious on this one. I absolutely loved it
@deasnutz9965 yes I agree!! His best video! I know I can't get a exact number, but what I do is clamp my amplifier while playing music and I end up with 280-300 amps of current draw..So I just round of around 100 amps for every 1000 watts give or take..I always tell people that stupid SMD is a waiste of money..Same with the bench tests in alot of ways, subwoofers have rise ect not a set load..idk that's how I've always felt about it
@@johnoates3326 jesus what amp do you have? majority only draw about 50amps per 1000w on music.
@weeduck9579 a very cheap one soundstreme txp12000.1..It might be 50 amps per 1000 watts I've always been told general rule of thumb is 100 amps of current per every 1000 watts, I may have been told wrong.
@weeduck9579 soundstreme txp12000.1, I was always told for every 100 amps of current draw is 1000 watts..But I may have been misinformed.
This made my day lol. Thanks! ❤
Oh I celebrated all day and cried a little at the same time...😂😂
What if the small POS Is off and the smd is accurate!?
Ask the same question but reversed . What if the new meter is accurate and the POS smd is and has been wrong from the very beginning? 😒
Steve and d'amore have been grifters from the jump. Anybody who trys to make a product seem like magic, just walk away. I've been a field engineer for about a decade and electronics and electrical doesn't magically change when its applied to car audio. If you just gotta know what your power is just buy the correct tools for the job, otherwise just install you stuff correctly and enjoy.
Steve Meade and Tony are only install guys not engineers 😂
😂😂😂😂😂
Well I ordered one so we'll see 🤷♂️ I bought it over a month ago. If I would have seen this before, I probably would have just waited for the LF Audio one.
Fiats on here ...
@deasnutz9965 yeah I see. We've followed each other on tiktok and stuff for years.
@deasnutz9965 I actually just got a notification from the shop app that my watt meter is out for delivery 🤣
Thought something was a little off myself. Hope the cheap one is accurate cause I want one. If it is. That is.
Definitely more practical
I just knew right away he was opening a can. Parker is a good dude. I hope this works out ok I think it will.
There's no turning back. Might as well keep goin..like forest Gump 😂
@@deasnutz9965😂😂😂
I bought the Bassheadgarage watt meter and should be delivered soon but I'd rather be under rated than over rated. But this will be interesting when other meters hit the market. I'm going for the underdog.😎
Keep us updated
I think this is a difference between how they are measuring the power. Clipping means the waveform is more and more square the further into clipping you go. The amp output spends more time at the peak of the wave, peak voltage when playing square wave, and ends up measuring more power because of it?
It's interesting that the Basshead Garage one measures less power. Not sure what's going on
The impedance was identical but somehow the smd doubled its power... hmmm. 😂
@@deasnutz9965 I can't tell if the SMD meter clip light was coming on or not. I heard parker say he was driving to clipping.
Ah! Another Steve Mead fan I see! 😆
😂😂😂 seems to be a lot
So is the garage one right and the SMD wrong?
Great question 😂
So i watched this video yesterday just like to say Parker you Rock.
He became my favorite for at least a month
I would trust the direct wire connected meter over a wire thru hole designed meter. Im more interested in finding something to tell me voice coil temps than power. Yes i over power my subs😉
I know it would be cool to have temp probes/ sensors .
That t2ss coupler cost 3 dollars
Bro that's crazy! I was watching that video the other day too. Yup crazy 💩💩💩
You got that right
Volt meter amp meter and a little math.
Hell yeah pretty much
WOW! What a way to get exposed! He wasn't even trying to show the SMD as a piece of shi+! 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
I have that watt meter and its been accurate so far and for only 90$
Have you tried clamping with oscope , clamp meter ? Just curious
@@deasnutz9965 yessir I have clamped with both and has seem very accurate I have another meter that should get here within next 2 weeks. I'll send it to you brand new not opened if you wanna test the amps you have no strings attached.
People are tired of the bullshit.we was talking about a 12 pack of acrylic paint yesterday at walmart it was almost 3$ cheaper to buy 12 individual.😂
Politicians do not do their jobs.let these businesses do whatever they want.
Its terrible.. you can buy a piece of poonanner cheaper than a jug of milk. I mean ...at the strip club a dollar will let you see a boob.. a dollar in the store will get a pack of big red chewing gum. 😂😂
How you know the smd is off and not the cheap meter?
How do you know the cheap meter is off and not the high dollar SMD ? 😮
MY question is when i watched this video earlier today i wanted to know which IS correct?
Effectively, the way electricity works, neither are a "perfect" way of reading it, but if the question is "which one is closer", that answer would be the one that has a ground loop in it.
All of them are guessing tools. Best thing it does is reads impedance. But you would be better off to run an oscope and clamp meter and do ohms law. You'll get a perfect number. That's clean and USABLE power. Not dirty
@@deasnutz9965 The problem with that statement is that you can alter the reading of your output by simply changing frequency. Until an agreed upon frequency (and a viable, consistent test source) are provided, there's an almost infinite number of variables, and thereby outcomes. Even what's commonly referred to as "the standard" now (40hz for subs) is wrong, as it's not even a practical and absolute key in music. 36hz, for example, is much closer, yet everyone goes with 40hz, probably due in large part to SMD pedaling it.
Furthermore, suggesting using ohms law off of a number you get from a clamp meter might be "good enough", but it still isn't 100% accurate, as anything from what brand of clamp to the type of shielding the wire has on it (and even the location of the clamp placement) makes for variance in those readings. Without bare wire touching both a probe and a ground, you'll never truly get 100% accuracy (which is why the SMD unit is such a stain on the concept). It's like they don't even know what a Fluke (tool) _is_ used for.
SMD? More like SMH.
@@deasnutz9965 Id assume that the tools do ohms law, as both read voltage and have a current clamp, so both should be doing the same thing
@@LatvianVideoyes, but i would trust the one with direct leads and a ground loop. Hint: thats NOT the smd.
Indeed 😂
Its hilarious 😂
@Deas Nutz People dont do fucking math dude!!! Thats expecting way too much LOL!! 😂😂😂
Your right ...I shoulda known better. Wth was I thinking?
People don’t know how to do math anymore. Plus, there’s too many people out there that try to use the 12vdc side for measurements.
They need to get off their ass and do some math. 😂
I think now steve is starting to build parker a wooden cage to keep him locked up in
40 bucks on an oscope well spent 😂
Yep , i went to that website to try in order one those meters that was up against smd. There sold out wonder why. An also look up a good oscope on flea bay , an scamazon.$400 .that was the Olympic reason i was searching in first place . Gold !
Just by a graphical multimeter with ospcope function..its accurate and reliable. Only 59.00
You think Steve Meades dd1 is good or no good?
Its good. Of course if your amp already has a clip light you dont need one. Also who knows which meter is off here? My smd works fine.
You can do the same thing with much cheaper tools.
@@mikesilverthorn911nobody knows. Which is my point from day one. Ohms law is accurate. That's the ONLY way to do it.
@@douglasstone186absolutely 💯
This is the video I was commenting on yesterday I got my shipping notification for the BHG wattage meter this morning but I am extremely concerned about which is correct if either and why are they so far apart that could cause someone to damage their equipment
Who knows.. just get a graphical multimeter with oscope function. Set gains and let r eat.
@@deasnutz9965 can you please recommend a really good one for say around 100$ unfortunately with the blown amps and LF Audio volt meter needing to be repaired I'm kinda tapped right now
The Chinese meter reading should NOT be unstable like that while reading a sine wave output.
Ohms Law: I×E and an oscilloscope to read clipping, will tell who's lying about the numbers.
"""Interesting""😅😅😅
😂😂😂
Did you see the series of videos that Sean from EMF did. So funny. Steve made an turd of himself in the comments on those vids and eventually deleted most of them.
No but I've watched Sean make fools out of people before and laughed like hell. 😂
@@deasnutz9965 he basically used one of Smeads dumb tools (the gain setting one) incorrectly on purpose and made a video doing it. Someone told Smead and he got all of his cronies to talk smack in the comments. I was asking him to explain what Sean was doing wrong and he could not/would not. Leaning toward could not.
And I know for a fact that if you use the DD-1 to tune your gain with a flat signal from the head unit and then adjust the settings afterwards the settings you adjust send you straight into clipping it's bullshit and a waste of money i could have spent the 400$ i spent on the DD-1 and CC-1 combo package on better upgrades hell it barely registered the 40hz track and doesn't register distortion whatsoever from my head unit???? What head unit do you know that is stock from the factory that is distortion free NONE that I know of definitely a garbage product and a waste of money in my opinion I still had to set my gains with the multi meter
Ole 56.00 graphical is all a person needs. For real. Damn what a bad experience.. that sucks !!
@@deasnutz9965 what is a graphical I've never heard of it before but if it will help me learn better and get a more accurate reading for learning purposes I'm all for it
Just waited for you to jump on this lol
Oh it was like getting my first piece all over again ...😂
i love parker and the one on the left is far more better becuase its messures voltages anf rise
Selling the brand and the masses buy them. They get rich any your hard earned money 💸 SMH.
Its all good MBE is towing the line for SMD now 😂
Yeah or he calls an oscope an oskillascope 😂
Who could trust MBE ?
If you speak poorly then chances are you hear poorly...
MBE sounds like Bob bag of dicks Dylan !!!
@@deasnutz9965electwicity
Smd is a goofy old bass head brand
Definitely not worth the money
I wonder how long it will take Steve Meade to comment on his video that the smd shows higher because it reacts faster to the input signal. That seems to be his thing when his products fall short.
Oh I guarantee they're thinking of some lame shit right now 😂
I’m looking forward to Steve’s comments
He will not cause he knows it's the same thing shit there both from China but ones cheaper I bought one of his tools and I sent it back got a full refund and explained how a cheap oscilloscope will be and do better than his piece of garbage he's just picking everyone pockets for his expensive lifestyle I hope people quit buy his name that's all it is.
Steve and his bs 😂
So i guess the point is you're making is they're both crap? (Supposedly cause idc)
My point is ... what is the point ? Get it !
Ohms law , an oscope and a clamp meter is the ONLY accurate way. Its pretty much a guessing game. None of these meters would qualify in the industry I work in. We have 18000.00 meters that are CALIBRATED annually per the FCC .... So , I know what I'm taking about. Only 36 years of real experience
@@deasnutz9965 with you 100%. I meant to put idk in my comment. But yessir ohms law is pretty concrete. I guess I'm waiting on the video where somebody actually shows how Accurate or inaccurate each one really is with the formula
Hey Nolan I knew once you've seen this you was going to chime in and be on their ass.
Oh , I thought I was dreaming... but ole Parker made my day, probably made my year so far 😂😂😂
@@deasnutz9965 Id have to agree with ya ol buddy.
I was expecting Steve Meade in the comments.
Oh it won't be long 😂
😂😂😂
rich on gimmicks like most if your old school volt meters clamp meters and oscope for set that kit was crazy expensive and everyone was on them I stayed old school
Yeah , if its not broke don't fix it. I agree with ya
Way way sold out!
😂😂😂
But it's overprized and sold by some big (and pretty arrogant) youtuber so it must be good, right?
For sure ....LOL no doubt
An update for anyone wondering apparently the BHG wattage meter only has a 100-200 amp sensor depending on what model you have meaning correct me if im wrong that it can't read anything more than a 2k setup MAX so I as well as everyone else who ordered this literally can't even use it for our system im not even going to open mine it will be for sale to someone with a smaller setup that can use it properly
It’s 20kw u missed a zero
Well according to BHG website it’s says 20k and the manual says 15k. BHG need to fix that, which one is it 20k or 15k?
@@elmadridista125ur right they need to update it, but its because the original was at 15k and the new ones have been upgraded to the 20k
@@elmadridista125 the website right now says it is good for 20k but it only has a 150 amp sensor 20k is roughly 2000 amps of current if I recall it is 100 amps of current for every 1000 watts rms so how are you going to read 20k correctly with a 150 amp sensor
@@2000Rpz no it says 20k you are correct but what you are not understanding is it only has a 150 amp sensor unless I have been told wrong it's 100 amps of current for every 1000 watts rms so how are you going to get a proper reading on 20k with a 150 amp sensor
😂
😂
He did that s*** on accident didn't realize what he was doing because he's the most bought and paid for RUclipsr there is
Listen you got Jonathan you got Steve Tony Big d and a handful of others you just hurt their pockets they're coming with lawyers Believe that they're going to stop him
Yeah , I don't think he meant any harm . But , when I first stumbled on it. I was like.. ohh! No he didn't! 😂😂
@@deasnutz9965 so when he first started I watched him a lot but then it was obvious he was selling out to the audio companies so I blocked that s*** and I still don't watch it,, but this,, I just want to see if Steve's going to come after him like he does everybody else cuz I've watched Steve for years as an installer He's got some good ideas,, oddly enough watching Steve is what brought me and Patrick together,, I don't have enough money to go to get somebody like Steve but if I build it myself it's different I level this playing field
My smd works fine. Its accurate. Try replacing that one if it is in fact inaccurate. Could be the other meter.
Or is the smd wrong ? Where's the proof ?
@deasnutz9965 i know right? No proof which one is off. Mine works fine i know because ive tested it. I think SMD has alot of haters because of his success and thats sad. Men acting like women. Could be a defective meter.
@@mikesilverthorn911awww defending your boyfriend steve is ladylike. No offense