When to Use Sealants on Threaded Plumbing Connections | This Old House
HTML-код
- Опубликовано: 10 авг 2014
- Making watertight connections with This Old House plumbing and heating expert Richard Trethewey. (See below for a shopping list.)
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Shopping List for When to Use Sealants on Threaded Plumbing Connections:
teflon tape [amzn.to/2N9055D], used to wrap around threaded plastic fittings
pipe sealant [amzn.to/31ctaAs] (a.k.a. pipe dope), used for brushing onto threaded fittings
wicking string [amzn.to/2NU0xnN], used to wrap around and fill spaces between male threads
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldHouseWebsite
When to Use Sealants on Threaded Plumbing Connections | This Old House
/ thisoldhouse 
Хобби
So much information in under 4 minutes. This is why This Old House is the best home improvement channel.
One very important point you failed to make - when wrapping the Teflon tape onto the pipe - you must wrap it in a clockwise direction. Second point regarding the tape - do not wrap the tape beyond the end of the pipe.
So my dad, who worked with Local 3 in Denver, CO, told me to use Teflon tape and just a thin film of pipe dope after you wrap the joint. It lubricates the threads and you get a better fit up. He also recommended using pipe dope on all threads for this reason
no need to use both
I use both. Teflon always first before dope.
I couldn't stop a new threaded valve into old work from a slight leak until I used the wicking technique you demonstrated. Excellent trick and I thank you for your share.
Trebor Eclap me too!
Same with me, 1am and trying to resolve my leak with a second sediment water filter I just added. Tried the wicking technique with some leftover twine for burlap and it worked for me as well. Thank god for internet!
As always, your videos are awesome, very educational. Richard, you are one “VERY SMART MAN”... I know your knowledge comes from a lot of hard work, and pure determination to ensure the job you do for your customers will meet their expectations. You sir, get a “GOLD STAR” 🌟 ⭐️ 💫
Excellent instruction. I'm always amazed at the number of places I see homeowners have applied teflon tape. At least they were aware of the idea.
I go with the "tape is a lubricant, not a sealant" theory, and apply it anywhere I want to be sure I can remove connection in the future. Faucets and certain fittings are updated or disconnected frequently enough that I'd rather spend a few pennies on tape that isn't strictly necessary, rather than have to purchase new hoses.
“Oh yeah, I never noticed that before.” So funny.
remember that Kevin was a banker before and he's playing the person that doesn't know anything.
OCT. 2020. Thank you, was installing/replacing a hand held shower head. Thought I might need Teflon tape, but was not sure how to use it, this old house, needed almost ten wrap around before I stopped it from leaking at the shower pipe.
Great vid! Just what I was wondering. As with many things, "Different Strokes for Different Folks!"
Some people just want to watch the world learn, you are those people, thank you.
Never heard of the wicking before! Thanks for the video.
Perfect! Love Richard.
Some thread sealants are incompatible with plastic pipe especially CPVC or ABS. Can soften the plastic leading to failure. The yellow sealer especially.
THAT is a very helpful video!
Much appreciated.
Thanks guys.
Pipe dope also acts as a lubricant to allow a smoother tightening with less friction. As well as filling the threads to form a more liquid seal.
Great point!
@@Kevscancave Thanks. A very good plumber taught me that years ago.
going to finally start piece working gas and ive done it a bunch of time but by the hour and ive got it kind of down but this is refreshing to see cause i will be on my own now
Make sure you wrap your Teflon tape in a clockwise direction!!!!!
a. k. a. up the thread
Just did some research and the pvc manufacturers say not to use Teflon tape on their threaded fittings. Only proper thread sealant that stays soft. Don’t use anything else.
But what if it's reverse threaded?
If compacted or pressed after teflon tape application, any direction will do.
In the UK taper threads for domestic fittings have virtually died out. Pretty much only seen where the radiator unions are fitted. There are a few instances where the are joints with parallel threads. the only way to seal these is too stuff them with tape or the latest silicone impregnated cord, but it's hit and miss and frustrates the life out of me. Taper fittings work 99% of the time and give a degree of positioning, so are a great solution to most joints, so I'd love to see a lot more available on the UK market for domestic installations,
Excellent presentation TOH. I too have wondered when to use dope or Teflon tape or nothing. Now I have a better understanding.
I enjoyed the show, very clever piece of content!!
I just installed a whole-house water filter and the mfg instructions explicitly stating not using dope or sealant because it could harm the plastic filter housing. Just putting that out there that it's not always a go-to solution.
Fantastic content as always
I use "pipe dope" on all my plumbing threads, so that I can disassemble the unit in the future. I use it on the screws that hold the stop washer, threads on the union, when I service a valve body... just a little dope on the threads goes a long way to make a future repair sooo much easier!
What is the best pipe dope on the market for black iron pipe?
@@77Avadon77 Blue Monster
@@beerbeforebreakfast thanks 👍🤠
@@77Avadon77
Rector Seal T-Plus 2 for Dope that does NOT Cure(This is my Favorite) Thick and consistent. I don't even need to use Teflon Tape.
Rector Seal Yellow Number 5 for one that Cures.
RectorSeal True Blue for a Blue thick dope that Cures (Soft Set)
@@MrInfoPhilly thanks for the info when would you want something that cures or not cures or soft cures? Is this the difference between non-permanent, semi-permanent and permanent installations? Can you remove the Cure Sealant one? And if so how?
as a plumber, I always use both teflon tape and pipe dope on water connections. Drainage you can get away with just dope, but I don't chance it with water.
These videos are fantastic!
ALWAYS Always always read the msds sheets and manufacturers guide before proceeding to help!
Would have liked to have seen gas discussions where immediate pressurization is needed. Word on wrapping anything with tape check if the connection engages clock or counter clock with a quick first fitting test, then proceed in the opposite direction as shown in video 2-3 rounds. Some fittings are bi-directional or counter clock depending on the engineered use… for example, tapped and threaded excess natural gas flow connectors one side tightens left, the other right using 2 crescent wrenches to tighten for proper torque…. And some will require not to exceed a specific torque thus needing a wrench that can measure & stop at a certain torque.
Much thanks to the team for sharing such a great lesson on a multitude of piping & stuff we use to connect things! Lot’s of work we the people are so grateful to have access without cost! MANY Many many blessings!
Great stuff , thanks guys 👍🏾
To the point and Very useful video, Thanks
I use PTFE take to seal threads where needed like described, but I also use it as a thread protection, like anti-seize because most metal plumbing oxidizes over time and can seize threads making it very difficult to break a connection. Is this okay?
the one part they missed is that the soft set liquid sealant helps keep the threads so they will move later for rework.
so if you have a wc bolts if you use the liquid on the threads as new it will help on holding back corrosion so you can remove or tighten the bolts at a later date.
same on the threads for the new style faucet.
a dab on the threads help keep it from welding the two metals together chemically.
and yes on the yellow soft set harvey's liquid pipe sealer on LP and NG connections for black pipe as well as black to brass connections.
Hi. Nice video. Very straight forward.
I need to run 3/4” L copper pipe through a bulkhead for my air compressor. Can I use a PVC bulkhead or do I need brass? Any recommendations on which bulkhead to buy?
Thanks,
Paul
Oh, one more question. I’m using Unions in my compressed air lines. Should I use the T Plus 2 on the mating surface, or Loctite flange sealant 518?
So many options.
Thanks again.
I always use tape and dope (Blue monster and T Plus 2) when it is critical that there are no leaks. Irrigation and non pressure systems I just use tape.
03:40 Great information.
I'm trying to connect a metal incoming secondary water line (has threaded female end) to a PVC reducer (threaded male end). This joint has been sealed/ working for several years, but is now leaking. When I take the joint apart everything appears to be in good shape- no visible problems, blemishes, etc in either end. I retaped the male end and tightened w a wrench- it is still leaking through the same threads/ joint. Do you think pipe dope and maybe the wick will actually help, or do you think I need to replace the pieces all together? TIA, Teresa
Very cool, a plumber I know swears by Rectorseal Tru-Blu pipe slealant. Great info, thank you. 👍👍👍
The real old-timers use Rectorseal 5
I've used RectorSeal T Plus 2 on ABS pipe. It's thicker stuff designed for ABS and other pipes. @@KreemieNewgatt
Tried them all ....the best is Leak Lock made by Highline Chemicals.
Great video. One question is how tight to make each type of connection... I know most flex lines tell you how far beyond finger tight... If a fitting leaks, is the dope compromised?
Great tips guys!!!!!!!
Good informative video! 😎👍
Good instructions
This was exactly what I needed with great explanations and visual examples.
I agree. Now I see exactly what the different type of things are that seal connections of pipes to eachother or the things that stop pipes from leaking.
I always wondered what to use on that one spherical joint on the P trap. There is no rubber seal there. I usually just use some plastic safe silicone grease.
My man Richard!
Richard, where do you use plumber's putty? Everything!!!
Great vid. Thanks This Old House HNICs!
They didn't mention it but iam a plumber and any time I do a water line connection not a faucet supply or flared fitting. I will wrap pipe with teflon first then pipe dope over. This hasn't let me down yet. If you don't want problems use both.
"wrap pipe with teflon first then pipe dope over"
Great advice!
That sounds completely redundant. If the tape doesn't seal it the don't use it and vice versa. The goo only seals where you put it... I suppose only on the top surface of the tape.. nothing prohibits the tape to leak from other places... I really don't understand people who put tape & other stuff on the same joint.. what is the point!
The point I️s that it wont leak. Plumbers have been doing this for god knows how many YEARS. If it didn’t work, they wouldn’t be doing it.
So it is superstition.
Contrary to what the show is telling us, the teflon dope or tape is a thread lubricant, not an actual sealant. The thread faces seal against themselves, when properly tightened. The pipe dope can help somewhat, if the threads are cut poorly, however.
In the uk you can get various brands of non setting paste but one in particular called Rocol almost has a consistency of chewing gum and never fails when you paste a gas joint.
Well done. ..👍👍👍👍👍
very helpful!
Wicking is an old technique. I recently replaced my father's boiler, put in in the early 60s but the piping was from 1904, and the piping is all wicked and uses a black type of sealant that sets up hard. Without heat, I actually used a 48" pipe wrench with a 5 ft cheater to get 2" to loosen.
Tape, plus dope. That's what were taught in apprenticeship school. Never fails.
The black type sealant is called shelloc which is made from natural resin and was used in even today alongwith the thread wrapping in metal gi pipe plumbing.
Great video, but I wish you hadn't hid the labels on the type of pipe dope you use
I would like to get the same kind you use because I trust you guys to get the best but I don't know what brand you used
Hi, is the T plus 2 PTFE paste good for black pie (gas pipe)? Thanks
Thank you.
I like putting anti seize on steam and condensate unions
I had hoped to see how best to seal the joints on sink connections around the p- and j-trap fittings, where there is a nut with what appears to be a gasket of nylon or teflon. Should pipe dope or teflon tape be applied there?
Good advice for low pressure handyman stuff. High pressure mains I would use different stuff this stuf needs to be buried before you can even test you do not want failures if in doubt use both. America still using NPT type threads?Cheers from Oz
Is liquid pipe dope or stick pipe dope best for a water heater gas intake?
I have a 1 inch cold water supply line attaching to the well casing Male pvc to female metal I didnt tighten it quite enough and I have a small pinhole air leak where the threads meet the metal. I cant tighten it because everything else is glued. What can I do without taking everything apart?
Interesting. So, do any of you have advice on what to use for boat seacocks pipe connections?
Thruhull fittings use straight/parallel threads. It is an all-too common mistake to replaced seacocks with quarter-turn ball valves from the hardware store which have tapered pipe threads on their female fitting. Bad idea.
Excellent video and useful info!
Quick question: would MOLYKOTE® 111 work as a sealant for the bathroom pup-up drain gaskets? what other options would you recommend? I don't like Teflon tape.
111 is a silicone-based O-ring lubricant
This is a great video
I had to replace an ancient frozen toilet stop valve. It was threaded onto a 1/2 galvanized pipe but the pipe had straight threads and the valve had a washer (which was mostly gone). I could only find tapered thread fittings and didn't realize the pipe had straight threads, and since there is a quarantine on, I could only find Home Depot open. The FIP valve screwed on maybe 1 1/2 turns before stopping (since the straight thread doesn't really mate up). But in desperation I just slapped on pipe done and cranked down hard on the valve. It's not a great solution but I finally got it to stop dripping. I cannot find straight threaded stop valves anywhere! (Maybe cutting and rethreading the pipe is the solution?) Or somehow connecting an adapter...
For thermal installation-radiator pipe with Hemp or teflon tape?
Sealer not always needed on pipe thread. For instance. If it’s NPTF. F for fuel. The sealant telfolon is intended for lube in the assembly process. The seal is caused at apex of the thread. Interference deformation.
I believe "Blondie" is asking questions that ppl like me, who have never done this before, might want to know. His questions may seem unnecessary to some but they helped simplify matters for me.
Please explain wicking string again. What type string? Only cotton? What about valve stems on outdoor faucets?
JoeB
I usually use both tephlon tape and pipe dope on my black iron threads, never use pipe dope on PVC threads pipe dope can actually erode pvc pipe over time
That is plain dumb....
Thanks!
thank u very good video
always use it.
Straight dope.
Thanks. Now I know.
Everyone needs a Rich neighbor.
Just spent 3 hours installing a faucet in my bathroom. The 7/8 water feed side would not for the life of me thread onto the facet inputs. The small side threaded on by hand no problem. felt like it was going on straight, would seem to be tightening then it looked like it was slipping off steel braided water line
Teflon backed up with dope makes a good sealed high for a long time.
I'm thinking of trying that on my next repair. Because just the tape alone I've been having a hard time getting a good seal . 2" scrubber valves
so true than typical practice in the pipefitter trade
The threads on the National pipe thread (the one that you show on your black iron pipe) are actually what creates your water tight seal, pipe dope or teflon tape help you screw the fittings on a little easier because they provide some amount of lubrication but don't really play much of a role in sealing on black iron pipe with a NPT, if you made a proper thread and the pipe is snugged in it, in theory it shouldn't leak. Also always cut test threads before you start using perfectly good lengths of pipe because otherwise you could waste a lot of pipe before you know there is a problem.
@numberless. What is this " cut test " you speak of.
Purely a superstition. And if you've been a plumber for 42 years like I have, superstition is good At a U.S. federal prison build, they wanted the dope first, then the tape. The idea being the dope can pick up dirt if on the outside. Actually, I'm heartened to see a lot of quality plumbers tell you that teflon or dope is not a sealant. It is a lubricant to prevent friction when threading two involute circles together. Friction is heat. Heat is bad because the two materials to be joined have different expansion and contraction values. They may SEEM tight when first screwed together, but when allowed to cool will leak. I could screw together some water pipe w/o either dope or tape and after awhile the joints would rust up and not leak. However, the joints would now be as one with themselves and you'd never get them apart. So dope is also to aid in unscrewing fittings!. If only I could post Audel's description of Crane co.'s demonstration using a 10" threaded pipe, putting the pipe in a lathe and hacking away at the threads in various ways. Then screwing it together and putting 425 psi of air and then 1,000 psi hydraulic on the make up with no leaks. I'll try. nope. Anyway, it's in the 1925 Audel's plumbing book. On PDF. If you treat them as a lubricant, you'll never go wrong. Never try to make up voids with either one.
Max R He's saying to run a thread on a piece of pipe and then make sure the thread depth is right by running a fitting on it. I was taught 3 turns hand tight. Dies get worn or out of adjustment. Just because it was good last time you used the threader doesn't mean it will be this time.
Numberless Oats. Have you ever read Crane Co.'s test using damaged threads? It's in the 1925 Audel's plumbing and steamfitters guide. Available for free online in PDF
If i made a connection using pipe dope for a hot water heater and its dripping a little bit will tightening it more help or do i have to remove it and re do it. Any help would be much appreciated as i have to tend to this tomorrow morning.
Where do you guys operate in the U.S?
My situation or leak it's just like he showed with the compression fitting and that tapered compression going into that nut. I seen that he used pipe dope to help seal it. I'm just concerned that the dope might get diluted from the steam and maybe we'll keep leaking. I tried tightening it but that is it helping no matter how tight I make it
In your case seems like the cone or the seat is pitted.You never mentioned if it was new or an old style joint,hope that helps.
Most PVC manufacturers actually recommend non-hardening thread sealant over teflon tape for threaded PVC connections because it seals better and has less chance of damaging the fittings. IME, it works significantly better than teflon tape.
Can you apply thread sealant inside csst fitting on the corrugations and the compression sleeve?
Never
How about metal female thread onto pvc male thread? This pvc threads seem too easily damaged, but I haven't found an alternative. (I'm trying to hook a metal t adapter to my toilet tank.)
Don’t know if I’ll get a reply but with the supply hose, are there any negatives to using Teflon on those threads even though it’s not necessary?
Probably not, but both sides of the threaded area covered by tape are at atmosphere, not at water pressure, and lubrication is not needed. Note that these are straight threads, not tapered. When you tighten the connection the seal is on the face of the rubber washer not any part of the part you tighten.
I often see a similar situation with Teflon tape applied to the fitting on a gas regulator connection to a gas cylinder. In this case the seal is metal to metal and the rotating nut only tightens the connection and has no sealing surfaces.
Nice
great video. how come when i have a washer in place the pipe connection still leaks?
Joint isn't clean, washer is damaged, or joint doesn't line up perfectly.
Also could be that fitting isn’t tight enough or threads could be mismatched.
Im an electrician not plumber. But with plumbing fittings ive noticed that it seems anytime you connect brass fittings you most likely won't need sealant or teflon. My guess is because brass is a soft metal and smashes together to make a water tight connection.
He pretty much showed that with the radiator, but he didn't mention about the brass. But that seems to be the case when you see brass
I always wonder about brass to brass. And should guys be using tape or dope on flared fittings. I think not but see it all the time.
no for flared fittings
Get Permabond. It's a pipe thread sealant that can be used on water, gas, or other petroleum product pipe up to 2" It's the best I have ever used.
What kind of sealant for the threads of a PVC tailpiece??? (the threads right below the mack gasket)
Not sure what gasket you’re taking about but just did some research and the pvc manufacturers say not to use Teflon tape on their threaded fittings. Only proper thread sealant that stays soft. Don’t use anything else. Don’t use pipe dope that get hard either. This advice is only for plastic fittings, metal ones are alright to use tape and hard setting dope.
You put white teflon tape on PVC threads but they say not to do that I thought on the white plastic pipe?
How does teflon tape and/or dope stand up to heat, as in connections coming out of a boiler?
bigpardner ... teflon holds up in a frying pan, right? It's made for the heat.
I wonder how many trips to the hardware store this video has caused. Knew I was forgetting something....
Unions are used in order to make it easy to remove and reinstall something. To use 'dope', or any other sealant is a mistake that only lay people will do. Sealants are adhesives and while they don't dry brittle, they do dry hard. Often that hard that heat is needed to dismantle.
If that union joint is dismantled in the future, what you are left with is a very filthy joint that requires a lot of work to get clean again.
If the two faces have not been faced properly and there is a leak, only then would you use Teflon tape on the male face but NOT that white rubbish, it is too thin. Either use pink or yellow, (yellow is for gas but not exclusively so). Then when tightened, the joint will be sound and very easily cleaned up after dismantling.
Another tip;
When applying Teflon tape to a thread, if it is plastic it is better to rough the mail thread up by dragging a hacksaw blade over it at 90 degrees in several places around the thread.
If it is brass, use a set of tongue and groove pliers, we call them 'multigrips' and work you way around the thread, crimping little notches in the thread.
This will give the tape something to 'grip' and not slip as you screw the fitting together.
NOTHING is needed on the thread of a union, as mentioned.
The only time I use a combination of thread adhesive and Teflon tape is where the brass thread is very loose and often chromed as well.
When the threads a deeply cut and very loose. it is always good to leave them for sometime after screwing home to give the adhesive time to 'go off'.
Ken From Lyneham Plumbing Services.
__________________Teflon and or pipe dope is for non-stick. I use pipe dope with teflon in it, and both dope and tape on brass to dissimilar metal. All of this is to keep metal from chaffing inside the joint and balling up. It lets the 2 surfaces slide together so that the METAL ON METAL makes the seal. (Plumbing 101) Teflon and or pipe dope is not supposed to make the seal. It's so you can take it apart someday as well. I use it on every thread (except maybe supply connectors)n so that years later the plumber can get it apart.If you are using this to make the seal you are cutting substandard threads.
Rough the PVC threads up?...Crimping little notches in the thread? That's begging the threads to ball up inside....in 40 years of Union trained plumbing I never heard of that!
Nice info in vid.
How to deal with a cracked threaded pipe-end in a wall, which is causing seepage.
awqpak Did you have to replace the pipe? We have a rusted pipe and are trying really hard to get a deal. Any sealant work for you? He haven't had luck yet and I really don't want to replace the pipe which would mean going through a tile wall on some type of fibrous board.
Here in singapore.. we usually use the Teflon tape on the water hose even if there's a rubber gasket..😁
If you doing plumbing without a license you could get caned over there.
@@AStanton1966 haha..no canning but you do need licence to do plumbing as a job...
Facts 👍
Because of the way this video is presenting the information, If I put on my "never done this before" hat, the message is clear: Use teflon for plastic pipes an the dope for metal pipes.
Which is, of course, wrong.
If you start with metal, continue with metal. If something else needs to be used for plastic, that can be both done and explained WHY it is true.
Badass!
you dont address the connection that will be pressurized with city water, where a brass faucet is being threaded onto a pvc pipe fitting? can you use the tape? i have heard, one should not use the teflon tape when doing a pressure connection.
What brand of yellow pipe dope was recommended here? There are so many of them out there
Good question wandering the same thang couldn't get a read on that bottle
Do you ever use teflon tape and pipe dope together? I see some videos where that is done.
You forgot to mention the direction of wrapping the tape.
Clockwise
robert boykin that should be common sense
This had the slickest production value of any of the how-to videos I've been watching on this, but the most worthless and confusing information of any of them.
Ya I wrapped it the wrong direction once. Bet chuck Norris never has though
He told you to hold it with your left hand and wrap overhand. If you always hold your fitting that way they will always be correct, unless you are using left handed threads which may not even exist in plumbing fittings.