Lightin' up your lowers! Custom Dynamics lower fairing lights!!!
HTML-код
- Опубликовано: 15 май 2021
- @customdynamics was good enough to provide me with lower lights for the fairing on my @harleydavidson Ultra Limited. Go pick em up here: www.customdynamics.com/catego... and if you're in the market for a bike lift, go check out www.JSJacks.com and use code ProMonkey for 5% off!
Interior trim removal kit: www.amazon.com/dp/B07C7D1JND/...
#J&SJacks
#CustomDynamics
#HarleyDavidson
#Bagger
#UltraLimited
#SSCycles
#Advanblack
#SSCycle 
Авто/Мото
Another point to doing things to your bike yourself is you learn your bike and get to know your bike. Each task you do you find more out about your bike.
A lot of what I have tackled myself for my bike be it maintenance or adding things that make it different and not just stock gives me more confidence and educates me about my bike.
Thanks for your channel and for sharing it with us. I enjoy it and I learn from your sharing your own experiences.
Thanks Bro!
Right on!!!
Totally agree.
I bet 10 people have bought lights from custom dynamic because of my bike. I don't get anything for that. I'm just glad to help people and inspire them to make there bike there own.
We bought the Custom Dynamics lower lights for my wife’s 2019 Triglide. Like you, I didn’t really understand the directions so I watched several videos of installing the lights. Nobody showed the part where you connect the white wires under the faring. We decided to take it to our dealer to install the lights and then I saw your video. About one and a half hours later we had the lights installed. Thanks for taking the time to show the complete install.
The lights look and work great. I did the lowers and the fork lights from Custom Dynamics on my 2021 Road Glide Limited. Matter of fact, the bike is almost completely done, except for the latch lights. The wiring is trickier because you have to snake them through the system and remember that your forks turn but the fairing doesn't. Therefore you need to leave slack in the lines to turn the handlebars. Thanks to the assistance of the Custom Dynamics guys, they helped he figure it out..
I just finally got mine installed!!! Watched a couple guys do there lower fairing lights but no one talked about the white wire with the loop !!! Could not figure out why they didn’t work! Thank god I came across your install ! Figured it out after watching you! Thank you man!!!!!!
Glad I could help!
@@ProfessionalMonkey I’m watching your Wilbur shock video!!! You honestly love them ! I totally trust you and will buy them if u say so lol !!! I’ve watched ohlin and legends Everyone says something different lol
@@coryanderson7313 I think the thing is that ALL aftermarket shocks are 1000% better than stock. Anything is an upgrade, but if you're running a big full dresser with a fat guy on it, the Wilburs are gonna handle that weight better!
@@ProfessionalMonkey ok awesome yeah I’m 6 ft. 340. Lbs. my wife is 170. I have 2014 ultra limited. I’m big I don’t think I’m fat. Just big boned lol.
It's true. I know you have inspired me to do some work on my bikes. I just had surgery, but as soon as I get cleared by the doctor I will be back on the bike and finishing several of the projects I have started. Thanks for being there 😊.
I found the loosening of the two lower Allen screws not only impossible but unnecessary and was able to fish the wire through the lower easily. I installed the mirrors and windshield trim light as well.
Found your channel a few months ago and really enjoy your video’s. Being a mechanic for 50 years and a rider for 56 i think it’s great to see some common sense for a change and a cool sense of humor. Just got my daughter to do my subscription I’m not good with computer. Great job keep going.
THANK YOU!
I spit out your water I was drinking when you said call RUclips and get a refund....that was priceless...great videos.
The directions are as clear as mud! Thank you for going back and describing where the auxiliary power plug was. I have a lot of Custom Dynamics lights on my 2020 Ultra, I am very happy with their products!
Snark Monkey...I like that....hehehehe piss on em an call the dogs...Good video man.
Great videos, just being yourself and keeping it real.
Thank you! That’s the goal!
Great videos! Keep 'em coming. Appreciate the way you explain things. Cheers.
It's a well lit Geezer Glide
Sweet, Keep the videos coming. I couldn't afford to buya painted fender, and I wanted the CVO filler panel between the fender and saddlebags, did a little research, and went and bought one off of Ebay, anly been out once or twice because of weather, and got plenty of comments on it. Gotta make it your own, especially if your bike is black, cause everyone has a black Harley, except mine, Gauntlet Gray and blacked out. enjoy working on my bikes, because HD, IS TO DAMM EXPENSIVE!
Lights look great. Also Jameson Irish whiskey and ginger ale is a great adult beverage.
That was Glenlivet Founders...
Glad you had a good ride!
Love that jack. Got to get one
Those lights are awesome! I put some on my '16 CVO RGU. Enjoy!
Gotta say so far I LOVE your channel, two thumbs-up 👍👍
Awesome! Thank you!
Totally with you on the directions. I can build the building you’re standing in but don’t have the patience to read a bunch of overly detailed directions. Thx man
Ultra is looking killer 👍🏻.... trying to make my decision on J&S Jack with your discount.
But the only reason I want one is. kinda of pathetic reason...... so I can wash & detail the wheels without the garage yoga 😆
After you stop laughing, ..... I’ll probably do my own oil changes too 😬
Not laughing at all. That's one of the reasons I got one! You can sit on a little roller stool and clean the hell out of your rims in minutes...
I wondered how those looked in real life. Sharp! Thanks again as always!
You bet!
Call RUclips and ask for refund ! PMSL 🤣 🤣🤣🤣
Looks good I like it your angle are fine keep up the good work
I`ll plug CD as well-- I have these lights on my 2019 CVO, really adds to the "safety aspect" of riding bikes and looks really nice on the bike.
Good Job I installed these on my bike and watched a few videos and yours was the only one that referenced the aux plug. I could not figure for the life of me why the lights would only signal. the instructions do say it but I was not understanding. I was so close to calling CD and came across your video when I had the phone in my hands LOL. I did not realize there was a dummy plug in the aux plug and your video saved me from sounding crazy on the phone to CD. Again Thanks and I will plug your page on my youtube page for sure/
Jameson and gingerale maybe. Dig those lights alot. Which s&s air cleaner did you go with on the limited? Really digging the look each time I see it. Also yes they still have the fork mount tie downs for behind the spot lights, got them on my Streetglide, they help.
The Intake I have is the Stealth with the classic tear drop cover (not the mini). I like it cause its what the cool bikes had when I was a kid.
Yes they still make the tie downs for your bike. I got a set installed and are the best for transporting
Thank you Brother and Sister Moneky! I really enjoy your channel! I agree, Custom Dynamics is awesome! They replaced a run turn brake that failed at no cost! They even worked with me on phone to troubleshoot!
Right on
Hmmmm....how about a Trac Dynamics AL Swing Arm and Carbon Fiber Wheels to work with Wilbur Suspension system?
Too high end for me!
We used to use the tie downs when trailering but my husband stopped bc he didn't like the added constant pull down or compression on the forks during travel. So we sold ours, but I do believe they still make them.
What distillery is your ginger ale from🤣
Those are cool! I do really like them
Dude....youre nothin but a big ole play baby!!! Keep it up. The hard lower lights are BAD ASS!!! I put em on my sled a couple months ago and got nothing but complements about em.
Let me know where yall are at in Orlando as my son and I are headed that way in June and think it would be cool as hell to have a couple St. Louis boys get together over a couple beers and a cigar.
I am actually 4 hours south of Orlando. Next time I am up that way I will put it out there if anyone wants to have a beer.
cool video , im fixing to install lower faring and windshield trim lights this weekend , this helped
Good luck!
The lights look slicker than "greased owls shit" ;-))
Installed these lights on my white 2020 CVO Tri - Glide along with Custom Dynamics windshield trim lights. They look great together.
I might have to do the windshield trim later!!!
I have those on my '19 Electra Glide. They're really bright and really light up the road.
I like your personality and the ability to make fun of yourself as you explain the installation.
I look at the pictures and read what printed by the picture. Then I toss the direction after that.
You WILL love this:
B&W TRAILER HITCHES BIKER BAR- TOURING
I do love that thing, really cool. The problem is I don't want anything that leaves brackets on my RV floor. The little one would stub her toe constantly...
Another great vid dude.
Thanks for the video. I was stuck at the same point (the lower fairing led’s was only working as turn/hazard). Thanks again.
Glad it helped
Easy peasy,with this video thanks!!
Thank you for the tips, plan on putting those on and DEFINITELY would of been searching for that 2nd wire!!! Lol
I thought I had lost my mind!
@@ProfessionalMonkey 🤪
I had the same frustration when I did my lower fairing lights last week. Looks good
It looks fantastic, but man that daisy chaining thing just stumped me for a good hour.
@@ProfessionalMonkey
Me too, and I’m a mechanic
@@josephmiddleton8584 Ha! Thank you for making me feel better about it!!!
@@ProfessionalMonkey
LOL! You’re welcome
I remember Love Bug season in Houston. I don’t miss it.
The best part about Professional Monkey video's is no matter how good or bad my day may be, I know you're going to make me laugh,
I am so glad I can make you laugh. That’s what this is all about!
Dat Dang bumhauer done lit up da bike like a dang on Xmas tree I tell u whut!!!
That cracked me up...
Custom Dynamics makes some quality stuff - I added the www.customdynamics.com/catalogsearch/result/?q=category+headlamps-auxiliary-lights+led-auxiliary-lights#q=category%2Bheadlamps-auxiliary-lights%2Bled-auxiliary-lights.
I just installed these lights on my 2020 ultra limited last week, found out those white wires are new, in fact the instruction with mine had the old system that used the the turn signal harness to power the white lights. But after a quick call to Custom Dynamics help line they help get the right instruction to me. Again great customer service from Custom Dynamics. These lights are a big improvement in lighting up the front of the Bike. Professional Monkey if you would have done this video/ install over a week ago i would have known what the extra (white) wires were for and how to hook them... LOL Your video is very good, hopefully it will help other that might have gotten the wrong instruction with the new version of these light. Custom Dynamics did explain to me that a few got sent out with the old instruction.
I hope it helps. Also the the power line loop through thing was confusing to someone like me that is only somewhat intelligent.
Dude, looks awesome!!! I’ve been wanting those for my 2019 CVO. I also want the ProBeam Dynamic Strips front turn signals low profile and the rear saddle bag latch lights, and the front fork lights that replace the reflectors.
All good choices. I am not a fan of reflectors on my forks though. I have never gone more than 24 hours without pulling those off the forks of a new bike!
Thoes lights look Great an should be a great safety feature also, good job
Install the windshield lights as well. Xmas up front. Looks good!
I Dig it, looks good.
Thanks brother, that shit had me scratching my head
I am going to say, your videos are for entertainment, not tutorial and you're doing a fine job. Tutorials are Lawabidingbikers!
Scotch and soda
Nice score .thanks 😊
Thanks for watching!
Love it.. looks cool
Nice! Adding to “the list”.
What a tool. Love it
I have the same lights it really lights up the bike
The tie down brackets are great have them on my 2019 Ultra
Just ordered some!
Did you see the comment I left on your last live stream?
Snip about 6’ off your fish tape for moving wires around (helped me out). Just remember to heat the tape up orange when you bend the hook back in it. 👍
It hadn't even occurred to me that complaining about the camera angle was even an option.
Love bugs must be like the Shaf flies we get hear on the ST Lawrence River in Northern NY. Stink like Dead fish and are super Nasty to get off. I usually avoid the area when they are out
Exactly! I typically throw a towel soaked in hot water then come back in a bit to get them off.
What is the part number for that Train Horn ? I have been watching for a few weeks now and have to say I like your How To Do It's along with sense of Humor .
Thanks! Just Google Custom Dynamics ProBeast and it will come up,
They are great 👍🏻. Helped me, when I changed the front tire on my Street Glide. 😂😂😂🐒🐒🐒
I'm sure!
@@ProfessionalMonkey my battery 🔋 operated light went out, so I switched the bike on for some light 💡🤣🤣🤣
Those tie-down brackets are available everywhere in black or chrome. I bought mine in chrome from ebay for about $35.
That CVO horn probably adds 5 horses to the bike
Based off of your camera work you gained a new subscriber.
Yo dude, enjoying your vids, keep up the good work, :)
Grassy ass...
I saw that Wilbers box !
Thank goodness I just watched this video. CD has links to two install videos that don't mention those WHITE wires. I also have CD vent turn signal lights. I had everything blinking perfectly but could not power the running lights!! Took it back apart. Damn ran out of daylight. Thanks
I like it!
@Professional Monkey What size Klock Werks windshield is that? Ive been trying to decide between the 5" and 6.5". I don't like a real tall wind screen
Fork tie down brackets are available. There are also ones that go between passenger board mounts and frame to tie down the rear.
Oooooooo, I need those rear ones!!!
They still have those mounting brackets. I bought mine at Harley.
Hate those Love Bugs. Remember riding around Lake Okeechobee on my old Vulcan 1500 Classic, ducking down behind the wind screen and feeling the love bugs exploding on my hands. And they do smell like a bucket of assholes when you wash them off.
That's the best damn description of the funk on earth.
Quoting "Seven: just made my day!
Just bought our Triglide from black hills HD. Miss my Ultra Ltd and Road Glide already.
Very nice
Just got mine yesterday
New to your channel , and Bo Dean at your recommendation 😉 .... enjoy the useable content and humour ! Hope to catch next livestream
Welcome aboard!
As long as you drive a Ford!!! If bikes and Fords is nit the answer, you're asking the wrong questions. Keep it up
I purchased these, along with Custom Dynamics LED vent insert for my 2020 Tri Glide Ultra. After installation, I encountered a problem. When the turn signals are on, the opposite side running light would flash intermittently. When I installed them, I had the battery tender hooked up. When I disconnected the battery tender, the turn signals worked, but there's no running lights or passing lights. Customer service at Custom Dynamics has been phenomenal, but we can't figure out what the problem is. I'm wondering if there's a modulator of some kind installed somewhere or if there's one I should install. Great channel by the way. I never miss a video.
Yeah, I called RUclips, the young lady said the same thing you did.....DILLIGAF.
Thanks for the video, Santa brought me a set I need to install today. Your videos are an excellent help!
How do you set the 36” windshield down without scratching it?
LOL...AWESOME!
I'm curious. On the light housing, it appears there's a grill. Does that stay open for air to pass through, or do you put the stock block plate back in. I'm not talking about the piece that rotates to block/ let sit pass. But rather the piece you have to pop out to install the entire light housing on lower fairing.
You will love them you can see great right down on the ground and also other can see you very well
I just recently got recommended to your channel. Thank you for the content I'm really enjoying what your doing. I live in the Tampa area I'm glad to see someone here in the state putting out great content. Thank you
Awesome! Thank you!
Love your bike have you ever thought of putting the chrome visors on your lights?
I want recess rings for the lights but I’m not a fan of the visor look. Just preference.
Camera angle is fine,put it any place you want to make your videos. Thats the important angle we are getting from ya Monkey!!! THANKS FOR ALL YOU DO Brother!!!!!
I appreciate that
Really like those likes I want a set for my 14 cvo ultra
Yes, they still make the tiedown strap holders
Yea snarky dig 👌 it
Just ordered a set, Instructions say I should have LED bullet turn signals. I do not currently have them. I have the old factory bulb for turns still. Is this an issue or am I going to have to replace with LEDs in order for the lowers to work?
Hmmmmm... I haven't run into that yet. If it were me I would plug them in and test it to see if it works before you buy the LEDs, unless you are just looking for an excuse to get LEDs :). I will say that it will look better if its all LED since the old bulbs will blink slower... maybe that's the problem?
What’s your thoughts on the Amazon headlight compared to factory daymakers
It’s better than factory, and it’s a good deal, but if I were buying one I’d go for a well known brand. It’s just my preference...
Thanks for the info